langpacks: from now all langpacks contains comments and blank lines

1 files changed, 145 insertions, 0 deletions

diff --git a/langpacks/bulgarian/Plugins/CmdLine.txt b/langpacks/bulgarian/Plugins/CmdLine.txt
index 597bc95084..efb07aa87c 100644
--- a/langpacks/bulgarian/Plugins/CmdLine.txt
+++ b/langpacks/bulgarian/Plugins/CmdLine.txt
@@ -7,10 +7,133 @@
 ;============================================================

 [This plugin lets you control Miranda from the command line.]

 Приставката позволява контролирането на Miranda от командния ред.

+;file \plugins\CmdLine\src\CmdLine.cpp

 [Could not initialize CmdLine plugin property]

 Приставката CmdLine не може да бъде инициализирана коректно

 [Error]

 Грешка

+;file \plugins\CmdLine\src\mimcmd_data.h

+[Changes account status either globally or per account.\nUsage: status <status> [<account>].\nPossible values for <status> are: offline, online, away, dnd, na, occupied, freechat, invisible, onthephone, outtolunch.\n<Account> is an optional parameter specifying the account to set the status for. If it's not specified then the command will issue a global status change.]

+

+[Changes away message either globally or per account.\nUsage: awaymsg <message> [<account>].\n<Message> is the new away message.\n<Account> is an optional parameter specifying the account to set the away message for. If not specified then the away message will be set globally.]

+

+[Changes extended status either globally or per account.\nUsage: xstatus <xStatus> [<account>].\n<xStatus> is the new extended status to set. Possible values are: ...\n<Account> is an optional parameter specifying the account for which extended status is set. If not specified then extended status for all accounts will be changed.\nNOTE: Not all accounts/protocols support extended status.]

+

+[Disables or enables popups display.\nUsage: popups (disable | enable | toggle).\nThe command will either enable or disable popups display.]

+

+[Disables or enables sounds.\nUsage: sounds (disable | enable | toggle).\nThe command will either disable or enable sounds.]

+

+[Hides or shows the contact list window.\nUsage: clist (show | hide | toggle).\nThe command will either show or hide the contact list window.]

+

+[Closes Miranda.\nUsage: quit [wait].\nIf wait is used then the command will return only when CmdLine plugin has been unloaded by Miranda.]

+

+[Provides help on other commands.\nUsage: help [<command>].\nThe command will print help information for other commands. If run without any parameters it will print available commands.]

+

+[Notifies Exchange plugin to check for email.\nUsage: exchange check.]

+

+[Notifies YAMN plugin to check for email.\nUsage: yamn check.]

+

+[Calls a Miranda service.\nUsage: callservice <service> (d|s)<wParam> (d|s)<lParam>.\nThe command will call Miranda <service> service using wParam and lParam as arguments; the first letter of the parameter must be either 'd' if the parameter is a decimal number or 's' if the parameter is a string. Be careful when you use this function as you can only pass numbers and strings as data.\nNOTE: If you pass invalid data to a service, Miranda might crash.]

+

+[Sends a message to the specified contact(s).\nUsage: message <contact> [<contact> [<contact> [...]]] <message>.\nThe command will send <message> to the specified contact(s) - at least one contact must be specified - all parameters except the last one are considered recipients.\n<Contact> has the following format: <name>[:<account>]. <Name> is the contact display name or unique ID and <account> is an optional parameter representing the account of the contact (useful in case there is more than one contact with the same name).\nNOTE: The message string cannot exceed 512 characters. You can use \\n for new line (and \\\\n for \\n).]

+

+[Allows you to manage database settings.\nUsage:\n  db set <module> <name> (b|i|d|s|w)<value>\n  db delete <module> <name>\n  db get <module> <name>.\nThe command can set a database entry to the specified value (if the entry does not exist, it will be created) as well as read or delete a specified database entry. <Module> is the name of the module where the key should be located, <name> is the name of the key and <value> is the value to be written. A character must be placed before <value> in order to specify what kind of data to write: b - byte, i - integer (word), d - double word, s - string, w - wide string.]

+

+[Configures proxy settings either globally or per account.\nUsage: proxy (global|<account>) <setting> [<params>].\n<Setting> is one of the following settings:\n  status (disable | enable | toggle)\n  server <proxy type> <server> <port>.]

+

+[Allows you to search/list contacts or open message windows for specified contacts.\nUsage:\n  contacts list [<keyword> [account:<account>] [id:<id>] [status:<status>] [<keyword> [...]]].\nThe command will search all contacts and display the ones matching the search criteria. To search for a specific account use the keyword 'account:<account>'. To search for contacts that have a certain ID use the keyword 'id:<id>'. To search for contacts that have a certain status use 'status:<status>'.\n  contacts open [<keyword> [account:<account>] [id:<id>] [status:<status>] [<keyword> [...]]].\nThe command will open a message window for all contacts that match the search criteria. To search for a specific account use the keyword 'account:<account>'. To search for contacts that have a certain ID use the keyword 'id:<id>'. To search for contacts that have a certain status use 'status:<status>'. If no keyword is specified, the command will open a message window for all contacts that have unread messages.]

+

+[Shows history or unread messages for a contact.\nUsage: history <command> <contact>.\n<Command> is one of the following commands:\n  unread - show unread messages for that contact.\n  show <contact> <start> <finish> - show history from event number <start> to <finish>. If any number is negative, it is interpreted as a relative index from the last event number +1 (so the last event for a contact is -1).]

+

+[Shows version information for Miranda and CmdLine plugin. If CrashDumper plugin is installed, it will use its report instead.\nUsage: version.\nThe command will print Miranda's and CmdLine's version numbers or, if CrashDumper plugin is installed, it will show Version Info report.]

+

+[Changes the user's nickname on the given protocol to the new name.\nUsage: setnickname <protocol> new_nickname.]

+

+[Ignores or removes ignore flags for specific contacts.\nUsage:\n  ignore (block | unblock) <contact> [<contact> [<contact> [...]]].\nThe command will set or remove ignore flags for the specified contacts]

+

+[Executes Lua script via MirLua plugin.\nUsage:\n  call [<module>] <function>\n  exec "<path>"\n  eval "<code>"]

+

+;file \plugins\CmdLine\src\mimcmd_handlers.cpp

+[Wrong number of parameters for command '%s'.]

+

+[Unknown parameter '%s' for command '%s'.]

+

+[Current global status: %s.%s]

+

+[Changed global status to '%s' (previous status was '%s').]

+

+[Changed '%s' status to '%s' (previous status was '%s').]

+

+['%s' doesn't seem to be a valid account.]

+

+[Failed to change status for account '%s' to '%s'.]

+

+[Failed to set '%s' status message to '%s' (status is '%s').]

+

+[Successfully set '%s' status message to '%s' (status is '%s').]

+

+[Account '%s' does not support away messages, skipping.]

+

+[Changed '%s' status message to '%s' (status is '%s').]

+

+[Failed to change status message for account '%s' to '%s' (status is '%s').]

+

+[Popups are currently enabled.]

+

+[Popups are currently disabled.]

+

+[Popups were enabled successfully.]

+

+[Popups could not be enabled.]

+

+[Popups were disabled successfully.]

+

+[Popups could not be disabled.]

+

+[Sounds are currently enabled.]

+

+[Sounds are currently disabled.]

+

+[Sounds were enabled successfully.]

+

+[Sounds were disabled successfully.]

+

+[Contact list is currently shown.]

+

+[Contact list is currently hidden.]

+

+[Contact list was shown successfully.]

+

+[Contact list was hidden successfully.]

+

+[Issued a quit command.]

+

+[Issued a quit and wait command.]

+

+[Issued check email command to Exchange plugin.]

+

+[Exchange plugin is not running.]

+

+[Issued check email command to YAMN plugin.]

+

+[YAMN plugin is not running.]

+

+[CallService call successful: service '%s' returned %p.]

+

+[Invalid parameter '%s' passed to CallService command.]

+

+[Service '%s' does not exist.]

+

+[Message sent to '%s'.]

+

+[Message to '%s' was marked as sent but the account seems to be offline]

+

+[Could not send message to '%s'.]

+

+[Timed out while waiting for acknowledgment for contact '%s'.]

+

+[Could not find contact handle for contact '%s'.]

+

 [byte:%d]

 byte:%d

 [word:%d]

@@ -39,18 +162,40 @@ WORD
 DWORD

 [wide string]

 wide string

+[Wrote '%S:%s' to database entry '%S/%S'.]

+

+[Could not retrieve setting '%S/%S': %S.]

+

+[Setting '%S/%S' was not found.]

+

+['%S' proxy was disabled.]

+

+['%S' proxy was enabled.]

+

+[%S proxy server: %S %S:%d.]

+

+[%S proxy set to %s %S:%d.]

+

+[%S The port or the proxy type parameter is invalid.]

+

 [[me]]

 \[аз]

 [No unread messages found.]

 Не са намерени непрочетени съобщения.

+[%s:%S - %d unread events.]

+

 [Contact '%s' has %d events in history.]

 Контакта "%s" има "%d" събития в историята.

 [Error setting nickname to '%s' for protocol '%s']

 Възникна грешка при задаването на прякора "%s" за протокол "%s"

 [Command '%s' is not currently supported.]

 Към момента командата "%s" не се поддържа.

+;file \plugins\CmdLine\src\services.cpp

+[Could not create CommandLine listening server!]

+

 [You can only run one instance of CmdLine plugin.]

 Може да стартирате приставката CmdLine само веднъж.

+;file \plugins\CmdLine\src\utils.cpp

 [Notify]

 Уведомяване

 [Warning]