1 files changed, 0 insertions, 215 deletions
diff --git a/plugins/AdvaImg/src/LibJPEG/filelist.txt b/plugins/AdvaImg/src/LibJPEG/filelist.txt
deleted file mode 100644
index 62aba52552..0000000000
--- a/plugins/AdvaImg/src/LibJPEG/filelist.txt
+++ /dev/null
@@ -1,215 +0,0 @@
-IJG JPEG LIBRARY:  FILE LIST
-
-Copyright (C) 1994-2013, Thomas G. Lane, Guido Vollbeding.
-This file is part of the Independent JPEG Group's software.
-For conditions of distribution and use, see the accompanying README file.
-
-
-Here is a road map to the files in the IJG JPEG distribution.  The
-distribution includes the JPEG library proper, plus two application
-programs ("cjpeg" and "djpeg") which use the library to convert JPEG
-files to and from some other popular image formats.  A third application
-"jpegtran" uses the library to do lossless conversion between different
-variants of JPEG.  There are also two stand-alone applications,
-"rdjpgcom" and "wrjpgcom".
-
-
-THE JPEG LIBRARY
-================
-
-Include files:
-
-jpeglib.h	JPEG library's exported data and function declarations.
-jconfig.h	Configuration declarations.  Note: this file is not present
-		in the distribution; it is generated during installation.
-jmorecfg.h	Additional configuration declarations; need not be changed
-		for a standard installation.
-jerror.h	Declares JPEG library's error and trace message codes.
-jinclude.h	Central include file used by all IJG .c files to reference
-		system include files.
-jpegint.h	JPEG library's internal data structures.
-jdct.h		Private declarations for forward & reverse DCT subsystems.
-jmemsys.h	Private declarations for memory management subsystem.
-jversion.h	Version information.
-
-Applications using the library should include jpeglib.h (which in turn
-includes jconfig.h and jmorecfg.h).  Optionally, jerror.h may be included
-if the application needs to reference individual JPEG error codes.  The
-other include files are intended for internal use and would not normally
-be included by an application program.  (cjpeg/djpeg/etc do use jinclude.h,
-since its function is to improve portability of the whole IJG distribution.
-Most other applications will directly include the system include files they
-want, and hence won't need jinclude.h.)
-
-
-C source code files:
-
-These files contain most of the functions intended to be called directly by
-an application program:
-
-jcapimin.c	Application program interface: core routines for compression.
-jcapistd.c	Application program interface: standard compression.
-jdapimin.c	Application program interface: core routines for decompression.
-jdapistd.c	Application program interface: standard decompression.
-jcomapi.c	Application program interface routines common to compression
-		and decompression.
-jcparam.c	Compression parameter setting helper routines.
-jctrans.c	API and library routines for transcoding compression.
-jdtrans.c	API and library routines for transcoding decompression.
-
-Compression side of the library:
-
-jcinit.c	Initialization: determines which other modules to use.
-jcmaster.c	Master control: setup and inter-pass sequencing logic.
-jcmainct.c	Main buffer controller (preprocessor => JPEG compressor).
-jcprepct.c	Preprocessor buffer controller.
-jccoefct.c	Buffer controller for DCT coefficient buffer.
-jccolor.c	Color space conversion.
-jcsample.c	Downsampling.
-jcdctmgr.c	DCT manager (DCT implementation selection & control).
-jfdctint.c	Forward DCT using slow-but-accurate integer method.
-jfdctfst.c	Forward DCT using faster, less accurate integer method.
-jfdctflt.c	Forward DCT using floating-point arithmetic.
-jchuff.c	Huffman entropy coding.
-jcarith.c	Arithmetic entropy coding.
-jcmarker.c	JPEG marker writing.
-jdatadst.c	Data destination managers for memory and stdio output.
-
-Decompression side of the library:
-
-jdmaster.c	Master control: determines which other modules to use.
-jdinput.c	Input controller: controls input processing modules.
-jdmainct.c	Main buffer controller (JPEG decompressor => postprocessor).
-jdcoefct.c	Buffer controller for DCT coefficient buffer.
-jdpostct.c	Postprocessor buffer controller.
-jdmarker.c	JPEG marker reading.
-jdhuff.c	Huffman entropy decoding.
-jdarith.c	Arithmetic entropy decoding.
-jddctmgr.c	IDCT manager (IDCT implementation selection & control).
-jidctint.c	Inverse DCT using slow-but-accurate integer method.
-jidctfst.c	Inverse DCT using faster, less accurate integer method.
-jidctflt.c	Inverse DCT using floating-point arithmetic.
-jdsample.c	Upsampling.
-jdcolor.c	Color space conversion.
-jdmerge.c	Merged upsampling/color conversion (faster, lower quality).
-jquant1.c	One-pass color quantization using a fixed-spacing colormap.
-jquant2.c	Two-pass color quantization using a custom-generated colormap.
-		Also handles one-pass quantization to an externally given map.
-jdatasrc.c	Data source managers for memory and stdio input.
-
-Support files for both compression and decompression:
-
-jaricom.c	Tables for common use in arithmetic entropy encoding and
-		decoding routines.
-jerror.c	Standard error handling routines (application replaceable).
-jmemmgr.c	System-independent (more or less) memory management code.
-jutils.c	Miscellaneous utility routines.
-
-jmemmgr.c relies on a system-dependent memory management module.  The IJG
-distribution includes the following implementations of the system-dependent
-module:
-
-jmemnobs.c	"No backing store": assumes adequate virtual memory exists.
-jmemansi.c	Makes temporary files with ANSI-standard routine tmpfile().
-jmemname.c	Makes temporary files with program-generated file names.
-jmemdos.c	Custom implementation for MS-DOS (16-bit environment only):
-		can use extended and expanded memory as well as temp files.
-jmemmac.c	Custom implementation for Apple Macintosh.
-
-Exactly one of the system-dependent modules should be configured into an
-installed JPEG library (see install.txt for hints about which one to use).
-On unusual systems you may find it worthwhile to make a special
-system-dependent memory manager.
-
-
-Non-C source code files:
-
-jmemdosa.asm	80x86 assembly code support for jmemdos.c; used only in
-		MS-DOS-specific configurations of the JPEG library.
-
-
-CJPEG/DJPEG/JPEGTRAN
-====================
-
-Include files:
-
-cdjpeg.h	Declarations shared by cjpeg/djpeg/jpegtran modules.
-cderror.h	Additional error and trace message codes for cjpeg et al.
-transupp.h	Declarations for jpegtran support routines in transupp.c.
-
-C source code files:
-
-cjpeg.c		Main program for cjpeg.
-djpeg.c		Main program for djpeg.
-jpegtran.c	Main program for jpegtran.
-cdjpeg.c	Utility routines used by all three programs.
-rdcolmap.c	Code to read a colormap file for djpeg's "-map" switch.
-rdswitch.c	Code to process some of cjpeg's more complex switches.
-		Also used by jpegtran.
-transupp.c	Support code for jpegtran: lossless image manipulations.
-
-Image file reader modules for cjpeg:
-
-rdbmp.c		BMP file input.
-rdgif.c		GIF file input (now just a stub).
-rdppm.c		PPM/PGM file input.
-rdrle.c		Utah RLE file input.
-rdtarga.c	Targa file input.
-
-Image file writer modules for djpeg:
-
-wrbmp.c		BMP file output.
-wrgif.c		GIF file output (a mere shadow of its former self).
-wrppm.c		PPM/PGM file output.
-wrrle.c		Utah RLE file output.
-wrtarga.c	Targa file output.
-
-
-RDJPGCOM/WRJPGCOM
-=================
-
-C source code files:
-
-rdjpgcom.c	Stand-alone rdjpgcom application.
-wrjpgcom.c	Stand-alone wrjpgcom application.
-
-These programs do not depend on the IJG library.  They do use
-jconfig.h and jinclude.h, only to improve portability.
-
-
-ADDITIONAL FILES
-================
-
-Documentation (see README for a guide to the documentation files):
-
-README		Master documentation file.
-*.txt		Other documentation files.
-*.1		Documentation in Unix man page format.
-change.log	Version-to-version change highlights.
-example.c	Sample code for calling JPEG library.
-
-Configuration/installation files and programs (see install.txt for more info):
-
-configure	Unix shell script to perform automatic configuration.
-configure.ac	Source file for use with Autoconf to generate configure.
-ltmain.sh	Support scripts for configure (from GNU libtool).
-config.guess
-config.sub
-depcomp
-missing
-ar-lib
-compile
-install-sh	Install shell script for those Unix systems lacking one.
-Makefile.in	Makefile input for configure.
-Makefile.am	Source file for use with Automake to generate Makefile.in.
-ckconfig.c	Program to generate jconfig.h on non-Unix systems.
-jconfig.txt	Template for making jconfig.h by hand.
-mak*.*		Sample makefiles for particular systems.
-jconfig.*	Sample jconfig.h for particular systems.
-libjpeg.map	Script to generate shared library with versioned symbols.
-aclocal.m4	M4 macro definitions for use with Autoconf.
-
-Test files (see install.txt for test procedure):
-
-test*.*		Source and comparison files for confidence test.
-		These are binary image files, NOT text files.