1 files changed, 161 insertions, 161 deletions
diff --git a/plugins/AdvaImg/src/LibJPEG/jcapistd.c b/plugins/AdvaImg/src/LibJPEG/jcapistd.c
index c0320b1b19..fed66caf17 100644
--- a/plugins/AdvaImg/src/LibJPEG/jcapistd.c
+++ b/plugins/AdvaImg/src/LibJPEG/jcapistd.c
@@ -1,161 +1,161 @@
-/*
- * jcapistd.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains application interface code for the compression half
- * of the JPEG library.  These are the "standard" API routines that are
- * used in the normal full-compression case.  They are not used by a
- * transcoding-only application.  Note that if an application links in
- * jpeg_start_compress, it will end up linking in the entire compressor.
- * We thus must separate this file from jcapimin.c to avoid linking the
- * whole compression library into a transcoder.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/*
- * Compression initialization.
- * Before calling this, all parameters and a data destination must be set up.
- *
- * We require a write_all_tables parameter as a failsafe check when writing
- * multiple datastreams from the same compression object.  Since prior runs
- * will have left all the tables marked sent_table=TRUE, a subsequent run
- * would emit an abbreviated stream (no tables) by default.  This may be what
- * is wanted, but for safety's sake it should not be the default behavior:
- * programmers should have to make a deliberate choice to emit abbreviated
- * images.  Therefore the documentation and examples should encourage people
- * to pass write_all_tables=TRUE; then it will take active thought to do the
- * wrong thing.
- */
-
-GLOBAL(void)
-jpeg_start_compress (j_compress_ptr cinfo, boolean write_all_tables)
-{
-  if (cinfo->global_state != CSTATE_START)
-    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-
-  if (write_all_tables)
-    jpeg_suppress_tables(cinfo, FALSE);	/* mark all tables to be written */
-
-  /* (Re)initialize error mgr and destination modules */
-  (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo);
-  (*cinfo->dest->init_destination) (cinfo);
-  /* Perform master selection of active modules */
-  jinit_compress_master(cinfo);
-  /* Set up for the first pass */
-  (*cinfo->master->prepare_for_pass) (cinfo);
-  /* Ready for application to drive first pass through jpeg_write_scanlines
-   * or jpeg_write_raw_data.
-   */
-  cinfo->next_scanline = 0;
-  cinfo->global_state = (cinfo->raw_data_in ? CSTATE_RAW_OK : CSTATE_SCANNING);
-}
-
-
-/*
- * Write some scanlines of data to the JPEG compressor.
- *
- * The return value will be the number of lines actually written.
- * This should be less than the supplied num_lines only in case that
- * the data destination module has requested suspension of the compressor,
- * or if more than image_height scanlines are passed in.
- *
- * Note: we warn about excess calls to jpeg_write_scanlines() since
- * this likely signals an application programmer error.  However,
- * excess scanlines passed in the last valid call are *silently* ignored,
- * so that the application need not adjust num_lines for end-of-image
- * when using a multiple-scanline buffer.
- */
-
-GLOBAL(JDIMENSION)
-jpeg_write_scanlines (j_compress_ptr cinfo, JSAMPARRAY scanlines,
-		      JDIMENSION num_lines)
-{
-  JDIMENSION row_ctr, rows_left;
-
-  if (cinfo->global_state != CSTATE_SCANNING)
-    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-  if (cinfo->next_scanline >= cinfo->image_height)
-    WARNMS(cinfo, JWRN_TOO_MUCH_DATA);
-
-  /* Call progress monitor hook if present */
-  if (cinfo->progress != NULL) {
-    cinfo->progress->pass_counter = (long) cinfo->next_scanline;
-    cinfo->progress->pass_limit = (long) cinfo->image_height;
-    (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
-  }
-
-  /* Give master control module another chance if this is first call to
-   * jpeg_write_scanlines.  This lets output of the frame/scan headers be
-   * delayed so that application can write COM, etc, markers between
-   * jpeg_start_compress and jpeg_write_scanlines.
-   */
-  if (cinfo->master->call_pass_startup)
-    (*cinfo->master->pass_startup) (cinfo);
-
-  /* Ignore any extra scanlines at bottom of image. */
-  rows_left = cinfo->image_height - cinfo->next_scanline;
-  if (num_lines > rows_left)
-    num_lines = rows_left;
-
-  row_ctr = 0;
-  (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, num_lines);
-  cinfo->next_scanline += row_ctr;
-  return row_ctr;
-}
-
-
-/*
- * Alternate entry point to write raw data.
- * Processes exactly one iMCU row per call, unless suspended.
- */
-
-GLOBAL(JDIMENSION)
-jpeg_write_raw_data (j_compress_ptr cinfo, JSAMPIMAGE data,
-		     JDIMENSION num_lines)
-{
-  JDIMENSION lines_per_iMCU_row;
-
-  if (cinfo->global_state != CSTATE_RAW_OK)
-    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-  if (cinfo->next_scanline >= cinfo->image_height) {
-    WARNMS(cinfo, JWRN_TOO_MUCH_DATA);
-    return 0;
-  }
-
-  /* Call progress monitor hook if present */
-  if (cinfo->progress != NULL) {
-    cinfo->progress->pass_counter = (long) cinfo->next_scanline;
-    cinfo->progress->pass_limit = (long) cinfo->image_height;
-    (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
-  }
-
-  /* Give master control module another chance if this is first call to
-   * jpeg_write_raw_data.  This lets output of the frame/scan headers be
-   * delayed so that application can write COM, etc, markers between
-   * jpeg_start_compress and jpeg_write_raw_data.
-   */
-  if (cinfo->master->call_pass_startup)
-    (*cinfo->master->pass_startup) (cinfo);
-
-  /* Verify that at least one iMCU row has been passed. */
-  lines_per_iMCU_row = cinfo->max_v_samp_factor * DCTSIZE;
-  if (num_lines < lines_per_iMCU_row)
-    ERREXIT(cinfo, JERR_BUFFER_SIZE);
-
-  /* Directly compress the row. */
-  if (! (*cinfo->coef->compress_data) (cinfo, data)) {
-    /* If compressor did not consume the whole row, suspend processing. */
-    return 0;
-  }
-
-  /* OK, we processed one iMCU row. */
-  cinfo->next_scanline += lines_per_iMCU_row;
-  return lines_per_iMCU_row;
-}
+/*
+ * jcapistd.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains application interface code for the compression half
+ * of the JPEG library.  These are the "standard" API routines that are
+ * used in the normal full-compression case.  They are not used by a
+ * transcoding-only application.  Note that if an application links in
+ * jpeg_start_compress, it will end up linking in the entire compressor.
+ * We thus must separate this file from jcapimin.c to avoid linking the
+ * whole compression library into a transcoder.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/*
+ * Compression initialization.
+ * Before calling this, all parameters and a data destination must be set up.
+ *
+ * We require a write_all_tables parameter as a failsafe check when writing
+ * multiple datastreams from the same compression object.  Since prior runs
+ * will have left all the tables marked sent_table=TRUE, a subsequent run
+ * would emit an abbreviated stream (no tables) by default.  This may be what
+ * is wanted, but for safety's sake it should not be the default behavior:
+ * programmers should have to make a deliberate choice to emit abbreviated
+ * images.  Therefore the documentation and examples should encourage people
+ * to pass write_all_tables=TRUE; then it will take active thought to do the
+ * wrong thing.
+ */
+
+GLOBAL(void)
+jpeg_start_compress (j_compress_ptr cinfo, boolean write_all_tables)
+{
+  if (cinfo->global_state != CSTATE_START)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+
+  if (write_all_tables)
+    jpeg_suppress_tables(cinfo, FALSE);	/* mark all tables to be written */
+
+  /* (Re)initialize error mgr and destination modules */
+  (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo);
+  (*cinfo->dest->init_destination) (cinfo);
+  /* Perform master selection of active modules */
+  jinit_compress_master(cinfo);
+  /* Set up for the first pass */
+  (*cinfo->master->prepare_for_pass) (cinfo);
+  /* Ready for application to drive first pass through jpeg_write_scanlines
+   * or jpeg_write_raw_data.
+   */
+  cinfo->next_scanline = 0;
+  cinfo->global_state = (cinfo->raw_data_in ? CSTATE_RAW_OK : CSTATE_SCANNING);
+}
+
+
+/*
+ * Write some scanlines of data to the JPEG compressor.
+ *
+ * The return value will be the number of lines actually written.
+ * This should be less than the supplied num_lines only in case that
+ * the data destination module has requested suspension of the compressor,
+ * or if more than image_height scanlines are passed in.
+ *
+ * Note: we warn about excess calls to jpeg_write_scanlines() since
+ * this likely signals an application programmer error.  However,
+ * excess scanlines passed in the last valid call are *silently* ignored,
+ * so that the application need not adjust num_lines for end-of-image
+ * when using a multiple-scanline buffer.
+ */
+
+GLOBAL(JDIMENSION)
+jpeg_write_scanlines (j_compress_ptr cinfo, JSAMPARRAY scanlines,
+		      JDIMENSION num_lines)
+{
+  JDIMENSION row_ctr, rows_left;
+
+  if (cinfo->global_state != CSTATE_SCANNING)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  if (cinfo->next_scanline >= cinfo->image_height)
+    WARNMS(cinfo, JWRN_TOO_MUCH_DATA);
+
+  /* Call progress monitor hook if present */
+  if (cinfo->progress != NULL) {
+    cinfo->progress->pass_counter = (long) cinfo->next_scanline;
+    cinfo->progress->pass_limit = (long) cinfo->image_height;
+    (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
+  }
+
+  /* Give master control module another chance if this is first call to
+   * jpeg_write_scanlines.  This lets output of the frame/scan headers be
+   * delayed so that application can write COM, etc, markers between
+   * jpeg_start_compress and jpeg_write_scanlines.
+   */
+  if (cinfo->master->call_pass_startup)
+    (*cinfo->master->pass_startup) (cinfo);
+
+  /* Ignore any extra scanlines at bottom of image. */
+  rows_left = cinfo->image_height - cinfo->next_scanline;
+  if (num_lines > rows_left)
+    num_lines = rows_left;
+
+  row_ctr = 0;
+  (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, num_lines);
+  cinfo->next_scanline += row_ctr;
+  return row_ctr;
+}
+
+
+/*
+ * Alternate entry point to write raw data.
+ * Processes exactly one iMCU row per call, unless suspended.
+ */
+
+GLOBAL(JDIMENSION)
+jpeg_write_raw_data (j_compress_ptr cinfo, JSAMPIMAGE data,
+		     JDIMENSION num_lines)
+{
+  JDIMENSION lines_per_iMCU_row;
+
+  if (cinfo->global_state != CSTATE_RAW_OK)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  if (cinfo->next_scanline >= cinfo->image_height) {
+    WARNMS(cinfo, JWRN_TOO_MUCH_DATA);
+    return 0;
+  }
+
+  /* Call progress monitor hook if present */
+  if (cinfo->progress != NULL) {
+    cinfo->progress->pass_counter = (long) cinfo->next_scanline;
+    cinfo->progress->pass_limit = (long) cinfo->image_height;
+    (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
+  }
+
+  /* Give master control module another chance if this is first call to
+   * jpeg_write_raw_data.  This lets output of the frame/scan headers be
+   * delayed so that application can write COM, etc, markers between
+   * jpeg_start_compress and jpeg_write_raw_data.
+   */
+  if (cinfo->master->call_pass_startup)
+    (*cinfo->master->pass_startup) (cinfo);
+
+  /* Verify that at least one iMCU row has been passed. */
+  lines_per_iMCU_row = cinfo->max_v_samp_factor * DCTSIZE;
+  if (num_lines < lines_per_iMCU_row)
+    ERREXIT(cinfo, JERR_BUFFER_SIZE);
+
+  /* Directly compress the row. */
+  if (! (*cinfo->coef->compress_data) (cinfo, data)) {
+    /* If compressor did not consume the whole row, suspend processing. */
+    return 0;
+  }
+
+  /* OK, we processed one iMCU row. */
+  cinfo->next_scanline += lines_per_iMCU_row;
+  return lines_per_iMCU_row;
+}