diff options
Diffstat (limited to 'plugins/FTPFileYM/curl-7.29.0/lib/transfer.c')
| -rw-r--r-- | plugins/FTPFileYM/curl-7.29.0/lib/transfer.c | 1964 |
1 files changed, 1964 insertions, 0 deletions
diff --git a/plugins/FTPFileYM/curl-7.29.0/lib/transfer.c b/plugins/FTPFileYM/curl-7.29.0/lib/transfer.c new file mode 100644 index 0000000000..330b37a2b1 --- /dev/null +++ b/plugins/FTPFileYM/curl-7.29.0/lib/transfer.c @@ -0,0 +1,1964 @@ +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at http://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ + +#include "curl_setup.h" + +#include "strtoofft.h" +#include "strequal.h" +#include "rawstr.h" + +#ifdef HAVE_NETINET_IN_H +#include <netinet/in.h> +#endif +#ifdef HAVE_NETDB_H +#include <netdb.h> +#endif +#ifdef HAVE_ARPA_INET_H +#include <arpa/inet.h> +#endif +#ifdef HAVE_NET_IF_H +#include <net/if.h> +#endif +#ifdef HAVE_SYS_IOCTL_H +#include <sys/ioctl.h> +#endif +#ifdef HAVE_SIGNAL_H +#include <signal.h> +#endif + +#ifdef HAVE_SYS_PARAM_H +#include <sys/param.h> +#endif + +#ifdef HAVE_SYS_SELECT_H +#include <sys/select.h> +#endif + +#ifndef HAVE_SOCKET +#error "We can't compile without socket() support!" +#endif + +#include "urldata.h" +#include <curl/curl.h> +#include "netrc.h" + +#include "content_encoding.h" +#include "hostip.h" +#include "transfer.h" +#include "sendf.h" +#include "speedcheck.h" +#include "progress.h" +#include "http.h" +#include "url.h" +#include "getinfo.h" +#include "sslgen.h" +#include "http_digest.h" +#include "curl_ntlm.h" +#include "http_negotiate.h" +#include "share.h" +#include "curl_memory.h" +#include "select.h" +#include "multiif.h" +#include "connect.h" +#include "non-ascii.h" + +#define _MPRINTF_REPLACE /* use our functions only */ +#include <curl/mprintf.h> + +/* The last #include file should be: */ +#include "memdebug.h" + +#define CURL_TIMEOUT_EXPECT_100 1000 /* counting ms here */ + +/* + * This function will call the read callback to fill our buffer with data + * to upload. + */ +CURLcode Curl_fillreadbuffer(struct connectdata *conn, int bytes, int *nreadp) +{ + struct SessionHandle *data = conn->data; + size_t buffersize = (size_t)bytes; + int nread; +#ifdef CURL_DOES_CONVERSIONS + bool sending_http_headers = FALSE; + + if((conn->handler->protocol&(CURLPROTO_HTTP|CURLPROTO_RTSP)) && + (data->state.proto.http->sending == HTTPSEND_REQUEST)) { + /* We're sending the HTTP request headers, not the data. + Remember that so we don't re-translate them into garbage. */ + sending_http_headers = TRUE; + } +#endif + + if(data->req.upload_chunky) { + /* if chunked Transfer-Encoding */ + buffersize -= (8 + 2 + 2); /* 32bit hex + CRLF + CRLF */ + data->req.upload_fromhere += (8 + 2); /* 32bit hex + CRLF */ + } + + /* this function returns a size_t, so we typecast to int to prevent warnings + with picky compilers */ + nread = (int)conn->fread_func(data->req.upload_fromhere, 1, + buffersize, conn->fread_in); + + if(nread == CURL_READFUNC_ABORT) { + failf(data, "operation aborted by callback"); + *nreadp = 0; + return CURLE_ABORTED_BY_CALLBACK; + } + else if(nread == CURL_READFUNC_PAUSE) { + struct SingleRequest *k = &data->req; + /* CURL_READFUNC_PAUSE pauses read callbacks that feed socket writes */ + k->keepon |= KEEP_SEND_PAUSE; /* mark socket send as paused */ + if(data->req.upload_chunky) { + /* Back out the preallocation done above */ + data->req.upload_fromhere -= (8 + 2); + } + *nreadp = 0; + return CURLE_OK; /* nothing was read */ + } + else if((size_t)nread > buffersize) { + /* the read function returned a too large value */ + *nreadp = 0; + failf(data, "read function returned funny value"); + return CURLE_READ_ERROR; + } + + if(!data->req.forbidchunk && data->req.upload_chunky) { + /* if chunked Transfer-Encoding + * build chunk: + * + * <HEX SIZE> CRLF + * <DATA> CRLF + */ + /* On non-ASCII platforms the <DATA> may or may not be + translated based on set.prefer_ascii while the protocol + portion must always be translated to the network encoding. + To further complicate matters, line end conversion might be + done later on, so we need to prevent CRLFs from becoming + CRCRLFs if that's the case. To do this we use bare LFs + here, knowing they'll become CRLFs later on. + */ + + char hexbuffer[11]; + const char *endofline_native; + const char *endofline_network; + int hexlen; + + if( +#ifdef CURL_DO_LINEEND_CONV + (data->set.prefer_ascii) || +#endif + (data->set.crlf)) { + /* \n will become \r\n later on */ + endofline_native = "\n"; + endofline_network = "\x0a"; + } + else { + endofline_native = "\r\n"; + endofline_network = "\x0d\x0a"; + } + hexlen = snprintf(hexbuffer, sizeof(hexbuffer), + "%x%s", nread, endofline_native); + + /* move buffer pointer */ + data->req.upload_fromhere -= hexlen; + nread += hexlen; + + /* copy the prefix to the buffer, leaving out the NUL */ + memcpy(data->req.upload_fromhere, hexbuffer, hexlen); + + /* always append ASCII CRLF to the data */ + memcpy(data->req.upload_fromhere + nread, + endofline_network, + strlen(endofline_network)); + +#ifdef CURL_DOES_CONVERSIONS + CURLcode res; + int length; + if(data->set.prefer_ascii) { + /* translate the protocol and data */ + length = nread; + } + else { + /* just translate the protocol portion */ + length = strlen(hexbuffer); + } + res = Curl_convert_to_network(data, data->req.upload_fromhere, length); + /* Curl_convert_to_network calls failf if unsuccessful */ + if(res) + return(res); +#endif /* CURL_DOES_CONVERSIONS */ + + if((nread - hexlen) == 0) + /* mark this as done once this chunk is transferred */ + data->req.upload_done = TRUE; + + nread+=(int)strlen(endofline_native); /* for the added end of line */ + } +#ifdef CURL_DOES_CONVERSIONS + else if((data->set.prefer_ascii) && (!sending_http_headers)) { + CURLcode res; + res = Curl_convert_to_network(data, data->req.upload_fromhere, nread); + /* Curl_convert_to_network calls failf if unsuccessful */ + if(res != CURLE_OK) + return(res); + } +#endif /* CURL_DOES_CONVERSIONS */ + + *nreadp = nread; + + return CURLE_OK; +} + + +/* + * Curl_readrewind() rewinds the read stream. This is typically used for HTTP + * POST/PUT with multi-pass authentication when a sending was denied and a + * resend is necessary. + */ +CURLcode Curl_readrewind(struct connectdata *conn) +{ + struct SessionHandle *data = conn->data; + + conn->bits.rewindaftersend = FALSE; /* we rewind now */ + + /* explicitly switch off sending data on this connection now since we are + about to restart a new transfer and thus we want to avoid inadvertently + sending more data on the existing connection until the next transfer + starts */ + data->req.keepon &= ~KEEP_SEND; + + /* We have sent away data. If not using CURLOPT_POSTFIELDS or + CURLOPT_HTTPPOST, call app to rewind + */ + if(data->set.postfields || + (data->set.httpreq == HTTPREQ_POST_FORM)) + ; /* do nothing */ + else { + if(data->set.seek_func) { + int err; + + err = (data->set.seek_func)(data->set.seek_client, 0, SEEK_SET); + if(err) { + failf(data, "seek callback returned error %d", (int)err); + return CURLE_SEND_FAIL_REWIND; + } + } + else if(data->set.ioctl_func) { + curlioerr err; + + err = (data->set.ioctl_func)(data, CURLIOCMD_RESTARTREAD, + data->set.ioctl_client); + infof(data, "the ioctl callback returned %d\n", (int)err); + + if(err) { + /* FIXME: convert to a human readable error message */ + failf(data, "ioctl callback returned error %d", (int)err); + return CURLE_SEND_FAIL_REWIND; + } + } + else { + /* If no CURLOPT_READFUNCTION is used, we know that we operate on a + given FILE * stream and we can actually attempt to rewind that + ourselves with fseek() */ + if(data->set.fread_func == (curl_read_callback)fread) { + if(-1 != fseek(data->set.in, 0, SEEK_SET)) + /* successful rewind */ + return CURLE_OK; + } + + /* no callback set or failure above, makes us fail at once */ + failf(data, "necessary data rewind wasn't possible"); + return CURLE_SEND_FAIL_REWIND; + } + } + return CURLE_OK; +} + +static int data_pending(const struct connectdata *conn) +{ + /* in the case of libssh2, we can never be really sure that we have emptied + its internal buffers so we MUST always try until we get EAGAIN back */ + return conn->handler->protocol&(CURLPROTO_SCP|CURLPROTO_SFTP) || + Curl_ssl_data_pending(conn, FIRSTSOCKET); +} + +static void read_rewind(struct connectdata *conn, + size_t thismuch) +{ + DEBUGASSERT(conn->read_pos >= thismuch); + + conn->read_pos -= thismuch; + conn->bits.stream_was_rewound = TRUE; + +#ifdef DEBUGBUILD + { + char buf[512 + 1]; + size_t show; + + show = CURLMIN(conn->buf_len - conn->read_pos, sizeof(buf)-1); + if(conn->master_buffer) { + memcpy(buf, conn->master_buffer + conn->read_pos, show); + buf[show] = '\0'; + } + else { + buf[0] = '\0'; + } + + DEBUGF(infof(conn->data, + "Buffer after stream rewind (read_pos = %zu): [%s]\n", + conn->read_pos, buf)); + } +#endif +} + +/* + * Check to see if CURLOPT_TIMECONDITION was met by comparing the time of the + * remote document with the time provided by CURLOPT_TIMEVAL + */ +bool Curl_meets_timecondition(struct SessionHandle *data, time_t timeofdoc) +{ + if((timeofdoc == 0) || (data->set.timevalue == 0)) + return TRUE; + + switch(data->set.timecondition) { + case CURL_TIMECOND_IFMODSINCE: + default: + if(timeofdoc <= data->set.timevalue) { + infof(data, + "The requested document is not new enough\n"); + data->info.timecond = TRUE; + return FALSE; + } + break; + case CURL_TIMECOND_IFUNMODSINCE: + if(timeofdoc >= data->set.timevalue) { + infof(data, + "The requested document is not old enough\n"); + data->info.timecond = TRUE; + return FALSE; + } + break; + } + + return TRUE; +} + +/* + * Go ahead and do a read if we have a readable socket or if + * the stream was rewound (in which case we have data in a + * buffer) + */ +static CURLcode readwrite_data(struct SessionHandle *data, + struct connectdata *conn, + struct SingleRequest *k, + int *didwhat, bool *done) +{ + CURLcode result = CURLE_OK; + ssize_t nread; /* number of bytes read */ + size_t excess = 0; /* excess bytes read */ + bool is_empty_data = FALSE; + bool readmore = FALSE; /* used by RTP to signal for more data */ + + *done = FALSE; + + /* This is where we loop until we have read everything there is to + read or we get a CURLE_AGAIN */ + do { + size_t buffersize = data->set.buffer_size? + data->set.buffer_size : BUFSIZE; + size_t bytestoread = buffersize; + + if(k->size != -1 && !k->header) { + /* make sure we don't read "too much" if we can help it since we + might be pipelining and then someone else might want to read what + follows! */ + curl_off_t totalleft = k->size - k->bytecount; + if(totalleft < (curl_off_t)bytestoread) + bytestoread = (size_t)totalleft; + } + + if(bytestoread) { + /* receive data from the network! */ + result = Curl_read(conn, conn->sockfd, k->buf, bytestoread, &nread); + + /* read would've blocked */ + if(CURLE_AGAIN == result) + break; /* get out of loop */ + + if(result>0) + return result; + } + else { + /* read nothing but since we wanted nothing we consider this an OK + situation to proceed from */ + nread = 0; + } + + if((k->bytecount == 0) && (k->writebytecount == 0)) { + Curl_pgrsTime(data, TIMER_STARTTRANSFER); + if(k->exp100 > EXP100_SEND_DATA) + /* set time stamp to compare with when waiting for the 100 */ + k->start100 = Curl_tvnow(); + } + + *didwhat |= KEEP_RECV; + /* indicates data of zero size, i.e. empty file */ + is_empty_data = ((nread == 0) && (k->bodywrites == 0)) ? TRUE : FALSE; + + /* NUL terminate, allowing string ops to be used */ + if(0 < nread || is_empty_data) { + k->buf[nread] = 0; + } + else if(0 >= nread) { + /* if we receive 0 or less here, the server closed the connection + and we bail out from this! */ + DEBUGF(infof(data, "nread <= 0, server closed connection, bailing\n")); + k->keepon &= ~KEEP_RECV; + break; + } + + /* Default buffer to use when we write the buffer, it may be changed + in the flow below before the actual storing is done. */ + k->str = k->buf; + + if(conn->handler->readwrite) { + result = conn->handler->readwrite(data, conn, &nread, &readmore); + if(result) + return result; + if(readmore) + break; + } + +#ifndef CURL_DISABLE_HTTP + /* Since this is a two-state thing, we check if we are parsing + headers at the moment or not. */ + if(k->header) { + /* we are in parse-the-header-mode */ + bool stop_reading = FALSE; + result = Curl_http_readwrite_headers(data, conn, &nread, &stop_reading); + if(result) + return result; + + if(conn->handler->readwrite && + (k->maxdownload <= 0 && nread > 0)) { + result = conn->handler->readwrite(data, conn, &nread, &readmore); + if(result) + return result; + if(readmore) + break; + } + + if(stop_reading) { + /* We've stopped dealing with input, get out of the do-while loop */ + + if(nread > 0) { + if(conn->data->multi && Curl_multi_canPipeline(conn->data->multi)) { + infof(data, + "Rewinding stream by : %zd" + " bytes on url %s (zero-length body)\n", + nread, data->state.path); + read_rewind(conn, (size_t)nread); + } + else { + infof(data, + "Excess found in a non pipelined read:" + " excess = %zd" + " url = %s (zero-length body)\n", + nread, data->state.path); + } + } + + break; + } + } +#endif /* CURL_DISABLE_HTTP */ + + + /* This is not an 'else if' since it may be a rest from the header + parsing, where the beginning of the buffer is headers and the end + is non-headers. */ + if(k->str && !k->header && (nread > 0 || is_empty_data)) { + +#ifndef CURL_DISABLE_HTTP + if(0 == k->bodywrites && !is_empty_data) { + /* These checks are only made the first time we are about to + write a piece of the body */ + if(conn->handler->protocol&(CURLPROTO_HTTP|CURLPROTO_RTSP)) { + /* HTTP-only checks */ + + if(data->req.newurl) { + if(conn->bits.close) { + /* Abort after the headers if "follow Location" is set + and we're set to close anyway. */ + k->keepon &= ~KEEP_RECV; + *done = TRUE; + return CURLE_OK; + } + /* We have a new url to load, but since we want to be able + to re-use this connection properly, we read the full + response in "ignore more" */ + k->ignorebody = TRUE; + infof(data, "Ignoring the response-body\n"); + } + if(data->state.resume_from && !k->content_range && + (data->set.httpreq==HTTPREQ_GET) && + !k->ignorebody) { + /* we wanted to resume a download, although the server doesn't + * seem to support this and we did this with a GET (if it + * wasn't a GET we did a POST or PUT resume) */ + failf(data, "HTTP server doesn't seem to support " + "byte ranges. Cannot resume."); + return CURLE_RANGE_ERROR; + } + + if(data->set.timecondition && !data->state.range) { + /* A time condition has been set AND no ranges have been + requested. This seems to be what chapter 13.3.4 of + RFC 2616 defines to be the correct action for a + HTTP/1.1 client */ + + if(!Curl_meets_timecondition(data, k->timeofdoc)) { + *done = TRUE; + /* we abort the transfer before it is completed == we ruin the + re-use ability. Close the connection */ + conn->bits.close = TRUE; + return CURLE_OK; + } + } /* we have a time condition */ + + } /* this is HTTP or RTSP */ + } /* this is the first time we write a body part */ +#endif /* CURL_DISABLE_HTTP */ + + k->bodywrites++; + + /* pass data to the debug function before it gets "dechunked" */ + if(data->set.verbose) { + if(k->badheader) { + Curl_debug(data, CURLINFO_DATA_IN, data->state.headerbuff, + (size_t)k->hbuflen, conn); + if(k->badheader == HEADER_PARTHEADER) + Curl_debug(data, CURLINFO_DATA_IN, + k->str, (size_t)nread, conn); + } + else + Curl_debug(data, CURLINFO_DATA_IN, + k->str, (size_t)nread, conn); + } + +#ifndef CURL_DISABLE_HTTP + if(k->chunk) { + /* + * Here comes a chunked transfer flying and we need to decode this + * properly. While the name says read, this function both reads + * and writes away the data. The returned 'nread' holds the number + * of actual data it wrote to the client. + */ + + CHUNKcode res = + Curl_httpchunk_read(conn, k->str, nread, &nread); + + if(CHUNKE_OK < res) { + if(CHUNKE_WRITE_ERROR == res) { + failf(data, "Failed writing data"); + return CURLE_WRITE_ERROR; + } + failf(data, "Problem (%d) in the Chunked-Encoded data", (int)res); + return CURLE_RECV_ERROR; + } + else if(CHUNKE_STOP == res) { + size_t dataleft; + /* we're done reading chunks! */ + k->keepon &= ~KEEP_RECV; /* read no more */ + + /* There are now possibly N number of bytes at the end of the + str buffer that weren't written to the client. + + We DO care about this data if we are pipelining. + Push it back to be read on the next pass. */ + + dataleft = conn->chunk.dataleft; + if(dataleft != 0) { + infof(conn->data, "Leftovers after chunking: %zu bytes\n", + dataleft); + if(conn->data->multi && + Curl_multi_canPipeline(conn->data->multi)) { + /* only attempt the rewind if we truly are pipelining */ + infof(conn->data, "Rewinding %zu bytes\n",dataleft); + read_rewind(conn, dataleft); + } + } + } + /* If it returned OK, we just keep going */ + } +#endif /* CURL_DISABLE_HTTP */ + + /* Account for body content stored in the header buffer */ + if(k->badheader && !k->ignorebody) { + DEBUGF(infof(data, "Increasing bytecount by %zu from hbuflen\n", + k->hbuflen)); + k->bytecount += k->hbuflen; + } + + if((-1 != k->maxdownload) && + (k->bytecount + nread >= k->maxdownload)) { + + excess = (size_t)(k->bytecount + nread - k->maxdownload); + if(excess > 0 && !k->ignorebody) { + if(conn->data->multi && Curl_multi_canPipeline(conn->data->multi)) { + /* The 'excess' amount below can't be more than BUFSIZE which + always will fit in a size_t */ + infof(data, + "Rewinding stream by : %zu" + " bytes on url %s (size = %" FORMAT_OFF_T + ", maxdownload = %" FORMAT_OFF_T + ", bytecount = %" FORMAT_OFF_T ", nread = %zd)\n", + excess, data->state.path, + k->size, k->maxdownload, k->bytecount, nread); + read_rewind(conn, excess); + } + else { + infof(data, + "Excess found in a non pipelined read:" + " excess = %zu" + ", size = %" FORMAT_OFF_T + ", maxdownload = %" FORMAT_OFF_T + ", bytecount = %" FORMAT_OFF_T "\n", + excess, k->size, k->maxdownload, k->bytecount); + } + } + + nread = (ssize_t) (k->maxdownload - k->bytecount); + if(nread < 0 ) /* this should be unusual */ + nread = 0; + + k->keepon &= ~KEEP_RECV; /* we're done reading */ + } + + k->bytecount += nread; + + Curl_pgrsSetDownloadCounter(data, k->bytecount); + + if(!k->chunk && (nread || k->badheader || is_empty_data)) { + /* If this is chunky transfer, it was already written */ + + if(k->badheader && !k->ignorebody) { + /* we parsed a piece of data wrongly assuming it was a header + and now we output it as body instead */ + + /* Don't let excess data pollute body writes */ + if(k->maxdownload == -1 || (curl_off_t)k->hbuflen <= k->maxdownload) + result = Curl_client_write(conn, CLIENTWRITE_BODY, + data->state.headerbuff, + k->hbuflen); + else + result = Curl_client_write(conn, CLIENTWRITE_BODY, + data->state.headerbuff, + (size_t)k->maxdownload); + + if(result) + return result; + } + if(k->badheader < HEADER_ALLBAD) { + /* This switch handles various content encodings. If there's an + error here, be sure to check over the almost identical code + in http_chunks.c. + Make sure that ALL_CONTENT_ENCODINGS contains all the + encodings handled here. */ +#ifdef HAVE_LIBZ + switch (conn->data->set.http_ce_skip ? + IDENTITY : k->auto_decoding) { + case IDENTITY: +#endif + /* This is the default when the server sends no + Content-Encoding header. See Curl_readwrite_init; the + memset() call initializes k->auto_decoding to zero. */ + if(!k->ignorebody) { + +#ifndef CURL_DISABLE_POP3 + if(conn->handler->protocol&CURLPROTO_POP3) + result = Curl_pop3_write(conn, k->str, nread); + else +#endif /* CURL_DISABLE_POP3 */ + + result = Curl_client_write(conn, CLIENTWRITE_BODY, k->str, + nread); + } +#ifdef HAVE_LIBZ + break; + + case DEFLATE: + /* Assume CLIENTWRITE_BODY; headers are not encoded. */ + if(!k->ignorebody) + result = Curl_unencode_deflate_write(conn, k, nread); + break; + + case GZIP: + /* Assume CLIENTWRITE_BODY; headers are not encoded. */ + if(!k->ignorebody) + result = Curl_unencode_gzip_write(conn, k, nread); + break; + + case COMPRESS: + default: + failf (data, "Unrecognized content encoding type. " + "libcurl understands `identity', `deflate' and `gzip' " + "content encodings."); + result = CURLE_BAD_CONTENT_ENCODING; + break; + } +#endif + } + k->badheader = HEADER_NORMAL; /* taken care of now */ + + if(result) + return result; + } + + } /* if(! header and data to read ) */ + + if(conn->handler->readwrite && + (excess > 0 && !conn->bits.stream_was_rewound)) { + /* Parse the excess data */ + k->str += nread; + nread = (ssize_t)excess; + + result = conn->handler->readwrite(data, conn, &nread, &readmore); + if(result) + return result; + + if(readmore) + k->keepon |= KEEP_RECV; /* we're not done reading */ + break; + } + + if(is_empty_data) { + /* if we received nothing, the server closed the connection and we + are done */ + k->keepon &= ~KEEP_RECV; + } + + } while(data_pending(conn)); + + if(((k->keepon & (KEEP_RECV|KEEP_SEND)) == KEEP_SEND) && + conn->bits.close ) { + /* When we've read the entire thing and the close bit is set, the server + may now close the connection. If there's now any kind of sending going + on from our side, we need to stop that immediately. */ + infof(data, "we are done reading and this is set to close, stop send\n"); + k->keepon &= ~KEEP_SEND; /* no writing anymore either */ + } + + return CURLE_OK; +} + +/* + * Send data to upload to the server, when the socket is writable. + */ +static CURLcode readwrite_upload(struct SessionHandle *data, + struct connectdata *conn, + struct SingleRequest *k, + int *didwhat) +{ + ssize_t i, si; + ssize_t bytes_written; + CURLcode result; + ssize_t nread; /* number of bytes read */ + bool sending_http_headers = FALSE; + + if((k->bytecount == 0) && (k->writebytecount == 0)) + Curl_pgrsTime(data, TIMER_STARTTRANSFER); + + *didwhat |= KEEP_SEND; + + /* + * We loop here to do the READ and SEND loop until we run out of + * data to send or until we get EWOULDBLOCK back + * + * FIXME: above comment is misleading. Currently no looping is + * actually done in do-while loop below. + */ + do { + + /* only read more data if there's no upload data already + present in the upload buffer */ + if(0 == data->req.upload_present) { + /* init the "upload from here" pointer */ + data->req.upload_fromhere = k->uploadbuf; + + if(!k->upload_done) { + /* HTTP pollution, this should be written nicer to become more + protocol agnostic. */ + int fillcount; + + if((k->exp100 == EXP100_SENDING_REQUEST) && + (data->state.proto.http->sending == HTTPSEND_BODY)) { + /* If this call is to send body data, we must take some action: + We have sent off the full HTTP 1.1 request, and we shall now + go into the Expect: 100 state and await such a header */ + k->exp100 = EXP100_AWAITING_CONTINUE; /* wait for the header */ + k->keepon &= ~KEEP_SEND; /* disable writing */ + k->start100 = Curl_tvnow(); /* timeout count starts now */ + *didwhat &= ~KEEP_SEND; /* we didn't write anything actually */ + + /* set a timeout for the multi interface */ + Curl_expire(data, CURL_TIMEOUT_EXPECT_100); + break; + } + + if(conn->handler->protocol&(CURLPROTO_HTTP|CURLPROTO_RTSP)) { + if(data->state.proto.http->sending == HTTPSEND_REQUEST) + /* We're sending the HTTP request headers, not the data. + Remember that so we don't change the line endings. */ + sending_http_headers = TRUE; + else + sending_http_headers = FALSE; + } + + result = Curl_fillreadbuffer(conn, BUFSIZE, &fillcount); + if(result) + return result; + + nread = (ssize_t)fillcount; + } + else + nread = 0; /* we're done uploading/reading */ + + if(!nread && (k->keepon & KEEP_SEND_PAUSE)) { + /* this is a paused transfer */ + break; + } + else if(nread<=0) { + /* done */ + k->keepon &= ~KEEP_SEND; /* we're done writing */ + + if(conn->bits.rewindaftersend) { + result = Curl_readrewind(conn); + if(result) + return result; + } + break; + } + + /* store number of bytes available for upload */ + data->req.upload_present = nread; + +#ifndef CURL_DISABLE_SMTP + if(conn->handler->protocol & CURLPROTO_SMTP) { + result = Curl_smtp_escape_eob(conn, nread); + if(result) + return result; + } + else +#endif /* CURL_DISABLE_SMTP */ + + /* convert LF to CRLF if so asked */ + if((!sending_http_headers) && ( +#ifdef CURL_DO_LINEEND_CONV + /* always convert if we're FTPing in ASCII mode */ + (data->set.prefer_ascii) || +#endif + (data->set.crlf))) { + if(data->state.scratch == NULL) + data->state.scratch = malloc(2*BUFSIZE); + if(data->state.scratch == NULL) { + failf (data, "Failed to alloc scratch buffer!"); + return CURLE_OUT_OF_MEMORY; + } + /* + * ASCII/EBCDIC Note: This is presumably a text (not binary) + * transfer so the data should already be in ASCII. + * That means the hex values for ASCII CR (0x0d) & LF (0x0a) + * must be used instead of the escape sequences \r & \n. + */ + for(i = 0, si = 0; i < nread; i++, si++) { + if(data->req.upload_fromhere[i] == 0x0a) { + data->state.scratch[si++] = 0x0d; + data->state.scratch[si] = 0x0a; + if(!data->set.crlf) { + /* we're here only because FTP is in ASCII mode... + bump infilesize for the LF we just added */ + data->set.infilesize++; + } + } + else + data->state.scratch[si] = data->req.upload_fromhere[i]; + } + if(si != nread) { + /* only perform the special operation if we really did replace + anything */ + nread = si; + + /* upload from the new (replaced) buffer instead */ + data->req.upload_fromhere = data->state.scratch; + + /* set the new amount too */ + data->req.upload_present = nread; + } + } + } /* if 0 == data->req.upload_present */ + else { + /* We have a partial buffer left from a previous "round". Use + that instead of reading more data */ + } + + /* write to socket (send away data) */ + result = Curl_write(conn, + conn->writesockfd, /* socket to send to */ + data->req.upload_fromhere, /* buffer pointer */ + data->req.upload_present, /* buffer size */ + &bytes_written); /* actually sent */ + + if(result) + return result; + + if(data->set.verbose) + /* show the data before we change the pointer upload_fromhere */ + Curl_debug(data, CURLINFO_DATA_OUT, data->req.upload_fromhere, + (size_t)bytes_written, conn); + + k->writebytecount += bytes_written; + + if(k->writebytecount == data->set.infilesize) { + /* we have sent all data we were supposed to */ + k->upload_done = TRUE; + infof(data, "We are completely uploaded and fine\n"); + } + + if(data->req.upload_present != bytes_written) { + /* we only wrote a part of the buffer (if anything), deal with it! */ + + /* store the amount of bytes left in the buffer to write */ + data->req.upload_present -= bytes_written; + + /* advance the pointer where to find the buffer when the next send + is to happen */ + data->req.upload_fromhere += bytes_written; + } + else { + /* we've uploaded that buffer now */ + data->req.upload_fromhere = k->uploadbuf; + data->req.upload_present = 0; /* no more bytes left */ + + if(k->upload_done) { + /* switch off writing, we're done! */ + k->keepon &= ~KEEP_SEND; /* we're done writing */ + } + } + + Curl_pgrsSetUploadCounter(data, k->writebytecount); + + } WHILE_FALSE; /* just to break out from! */ + + return CURLE_OK; +} + +/* + * Curl_readwrite() is the low-level function to be called when data is to + * be read and written to/from the connection. + */ +CURLcode Curl_readwrite(struct connectdata *conn, + bool *done) +{ + struct SessionHandle *data = conn->data; + struct SingleRequest *k = &data->req; + CURLcode result; + int didwhat=0; + + curl_socket_t fd_read; + curl_socket_t fd_write; + int select_res = conn->cselect_bits; + + conn->cselect_bits = 0; + + /* only use the proper socket if the *_HOLD bit is not set simultaneously as + then we are in rate limiting state in that transfer direction */ + + if((k->keepon & KEEP_RECVBITS) == KEEP_RECV) + fd_read = conn->sockfd; + else + fd_read = CURL_SOCKET_BAD; + + if((k->keepon & KEEP_SENDBITS) == KEEP_SEND) + fd_write = conn->writesockfd; + else + fd_write = CURL_SOCKET_BAD; + + if(!select_res) /* Call for select()/poll() only, if read/write/error + status is not known. */ + select_res = Curl_socket_ready(fd_read, fd_write, 0); + + if(select_res == CURL_CSELECT_ERR) { + failf(data, "select/poll returned error"); + return CURLE_SEND_ERROR; + } + + /* We go ahead and do a read if we have a readable socket or if + the stream was rewound (in which case we have data in a + buffer) */ + if((k->keepon & KEEP_RECV) && + ((select_res & CURL_CSELECT_IN) || conn->bits.stream_was_rewound)) { + + result = readwrite_data(data, conn, k, &didwhat, done); + if(result || *done) + return result; + } + + /* If we still have writing to do, we check if we have a writable socket. */ + if((k->keepon & KEEP_SEND) && (select_res & CURL_CSELECT_OUT)) { + /* write */ + + result = readwrite_upload(data, conn, k, &didwhat); + if(result) + return result; + } + + k->now = Curl_tvnow(); + if(didwhat) { + /* Update read/write counters */ + if(k->bytecountp) + *k->bytecountp = k->bytecount; /* read count */ + if(k->writebytecountp) + *k->writebytecountp = k->writebytecount; /* write count */ + } + else { + /* no read no write, this is a timeout? */ + if(k->exp100 == EXP100_AWAITING_CONTINUE) { + /* This should allow some time for the header to arrive, but only a + very short time as otherwise it'll be too much wasted time too + often. */ + + /* Quoting RFC2616, section "8.2.3 Use of the 100 (Continue) Status": + + Therefore, when a client sends this header field to an origin server + (possibly via a proxy) from which it has never seen a 100 (Continue) + status, the client SHOULD NOT wait for an indefinite period before + sending the request body. + + */ + + long ms = Curl_tvdiff(k->now, k->start100); + if(ms > CURL_TIMEOUT_EXPECT_100) { + /* we've waited long enough, continue anyway */ + k->exp100 = EXP100_SEND_DATA; + k->keepon |= KEEP_SEND; + infof(data, "Done waiting for 100-continue\n"); + } + } + } + + if(Curl_pgrsUpdate(conn)) + result = CURLE_ABORTED_BY_CALLBACK; + else + result = Curl_speedcheck(data, k->now); + if(result) + return result; + + if(k->keepon) { + if(0 > Curl_timeleft(data, &k->now, FALSE)) { + if(k->size != -1) { + failf(data, "Operation timed out after %ld milliseconds with %" + FORMAT_OFF_T " out of %" FORMAT_OFF_T " bytes received", + Curl_tvdiff(k->now, data->progress.t_startsingle), k->bytecount, + k->size); + } + else { + failf(data, "Operation timed out after %ld milliseconds with %" + FORMAT_OFF_T " bytes received", + Curl_tvdiff(k->now, data->progress.t_startsingle), k->bytecount); + } + return CURLE_OPERATION_TIMEDOUT; + } + } + else { + /* + * The transfer has been performed. Just make some general checks before + * returning. + */ + + if(!(data->set.opt_no_body) && (k->size != -1) && + (k->bytecount != k->size) && +#ifdef CURL_DO_LINEEND_CONV + /* Most FTP servers don't adjust their file SIZE response for CRLFs, + so we'll check to see if the discrepancy can be explained + by the number of CRLFs we've changed to LFs. + */ + (k->bytecount != (k->size + data->state.crlf_conversions)) && +#endif /* CURL_DO_LINEEND_CONV */ + !data->req.newurl) { + failf(data, "transfer closed with %" FORMAT_OFF_T + " bytes remaining to read", + k->size - k->bytecount); + return CURLE_PARTIAL_FILE; + } + else if(!(data->set.opt_no_body) && + k->chunk && + (conn->chunk.state != CHUNK_STOP)) { + /* + * In chunked mode, return an error if the connection is closed prior to + * the empty (terminating) chunk is read. + * + * The condition above used to check for + * conn->proto.http->chunk.datasize != 0 which is true after reading + * *any* chunk, not just the empty chunk. + * + */ + failf(data, "transfer closed with outstanding read data remaining"); + return CURLE_PARTIAL_FILE; + } + if(Curl_pgrsUpdate(conn)) + return CURLE_ABORTED_BY_CALLBACK; + } + + /* Now update the "done" boolean we return */ + *done = (0 == (k->keepon&(KEEP_RECV|KEEP_SEND| + KEEP_RECV_PAUSE|KEEP_SEND_PAUSE))) ? TRUE : FALSE; + + return CURLE_OK; +} + +/* + * Curl_single_getsock() gets called by the multi interface code when the app + * has requested to get the sockets for the current connection. This function + * will then be called once for every connection that the multi interface + * keeps track of. This function will only be called for connections that are + * in the proper state to have this information available. + */ +int Curl_single_getsock(const struct connectdata *conn, + curl_socket_t *sock, /* points to numsocks number + of sockets */ + int numsocks) +{ + const struct SessionHandle *data = conn->data; + int bitmap = GETSOCK_BLANK; + unsigned sockindex = 0; + + if(conn->handler->perform_getsock) + return conn->handler->perform_getsock(conn, sock, numsocks); + + if(numsocks < 2) + /* simple check but we might need two slots */ + return GETSOCK_BLANK; + + /* don't include HOLD and PAUSE connections */ + if((data->req.keepon & KEEP_RECVBITS) == KEEP_RECV) { + + DEBUGASSERT(conn->sockfd != CURL_SOCKET_BAD); + + bitmap |= GETSOCK_READSOCK(sockindex); + sock[sockindex] = conn->sockfd; + } + + /* don't include HOLD and PAUSE connections */ + if((data->req.keepon & KEEP_SENDBITS) == KEEP_SEND) { + + if((conn->sockfd != conn->writesockfd) || + !(data->req.keepon & KEEP_RECV)) { + /* only if they are not the same socket or we didn't have a readable + one, we increase index */ + if(data->req.keepon & KEEP_RECV) + sockindex++; /* increase index if we need two entries */ + + DEBUGASSERT(conn->writesockfd != CURL_SOCKET_BAD); + + sock[sockindex] = conn->writesockfd; + } + + bitmap |= GETSOCK_WRITESOCK(sockindex); + } + + return bitmap; +} + +/* + * Determine optimum sleep time based on configured rate, current rate, + * and packet size. + * Returns value in milliseconds. + * + * The basic idea is to adjust the desired rate up/down in this method + * based on whether we are running too slow or too fast. Then, calculate + * how many milliseconds to wait for the next packet to achieve this new + * rate. + */ +long Curl_sleep_time(curl_off_t rate_bps, curl_off_t cur_rate_bps, + int pkt_size) +{ + curl_off_t min_sleep = 0; + curl_off_t rv = 0; + + if(rate_bps == 0) + return 0; + + /* If running faster than about .1% of the desired speed, slow + * us down a bit. Use shift instead of division as the 0.1% + * cutoff is arbitrary anyway. + */ + if(cur_rate_bps > (rate_bps + (rate_bps >> 10))) { + /* running too fast, decrease target rate by 1/64th of rate */ + rate_bps -= rate_bps >> 6; + min_sleep = 1; + } + else if(cur_rate_bps < (rate_bps - (rate_bps >> 10))) { + /* running too slow, increase target rate by 1/64th of rate */ + rate_bps += rate_bps >> 6; + } + + /* Determine number of milliseconds to wait until we do + * the next packet at the adjusted rate. We should wait + * longer when using larger packets, for instance. + */ + rv = ((curl_off_t)((pkt_size * 8) * 1000) / rate_bps); + + /* Catch rounding errors and always slow down at least 1ms if + * we are running too fast. + */ + if(rv < min_sleep) + rv = min_sleep; + + /* Bound value to fit in 'long' on 32-bit platform. That's + * plenty long enough anyway! + */ + if(rv > 0x7fffffff) + rv = 0x7fffffff; + + return (long)rv; +} + +/* + * Curl_pretransfer() is called immediately before a transfer starts. + */ +CURLcode Curl_pretransfer(struct SessionHandle *data) +{ + CURLcode res; + if(!data->change.url) { + /* we can't do anything without URL */ + failf(data, "No URL set!"); + return CURLE_URL_MALFORMAT; + } + + /* Init the SSL session ID cache here. We do it here since we want to do it + after the *_setopt() calls (that could specify the size of the cache) but + before any transfer takes place. */ + res = Curl_ssl_initsessions(data, data->set.ssl.max_ssl_sessions); + if(res) + return res; + + data->set.followlocation=0; /* reset the location-follow counter */ + data->state.this_is_a_follow = FALSE; /* reset this */ + data->state.errorbuf = FALSE; /* no error has occurred */ + data->state.httpversion = 0; /* don't assume any particular server version */ + + data->state.ssl_connect_retry = FALSE; + + data->state.authproblem = FALSE; + data->state.authhost.want = data->set.httpauth; + data->state.authproxy.want = data->set.proxyauth; + Curl_safefree(data->info.wouldredirect); + data->info.wouldredirect = NULL; + + /* If there is a list of cookie files to read, do it now! */ + if(data->change.cookielist) + Curl_cookie_loadfiles(data); + + /* If there is a list of host pairs to deal with */ + if(data->change.resolve) + res = Curl_loadhostpairs(data); + + if(!res) { + /* Allow data->set.use_port to set which port to use. This needs to be + * disabled for example when we follow Location: headers to URLs using + * different ports! */ + data->state.allow_port = TRUE; + +#if defined(HAVE_SIGNAL) && defined(SIGPIPE) && !defined(HAVE_MSG_NOSIGNAL) + /************************************************************* + * Tell signal handler to ignore SIGPIPE + *************************************************************/ + if(!data->set.no_signal) + data->state.prev_signal = signal(SIGPIPE, SIG_IGN); +#endif + + Curl_initinfo(data); /* reset session-specific information "variables" */ + Curl_pgrsStartNow(data); + + if(data->set.timeout) + Curl_expire(data, data->set.timeout); + + if(data->set.connecttimeout) + Curl_expire(data, data->set.connecttimeout); + + /* In case the handle is re-used and an authentication method was picked + in the session we need to make sure we only use the one(s) we now + consider to be fine */ + data->state.authhost.picked &= data->state.authhost.want; + data->state.authproxy.picked &= data->state.authproxy.want; + } + + return res; +} + +/* + * Curl_posttransfer() is called immediately after a transfer ends + */ +CURLcode Curl_posttransfer(struct SessionHandle *data) +{ +#if defined(HAVE_SIGNAL) && defined(SIGPIPE) && !defined(HAVE_MSG_NOSIGNAL) + /* restore the signal handler for SIGPIPE before we get back */ + if(!data->set.no_signal) + signal(SIGPIPE, data->state.prev_signal); +#else + (void)data; /* unused parameter */ +#endif + + return CURLE_OK; +} + +#ifndef CURL_DISABLE_HTTP +/* + * strlen_url() returns the length of the given URL if the spaces within the + * URL were properly URL encoded. + */ +static size_t strlen_url(const char *url) +{ + const char *ptr; + size_t newlen=0; + bool left=TRUE; /* left side of the ? */ + + for(ptr=url; *ptr; ptr++) { + switch(*ptr) { + case '?': + left=FALSE; + /* fall through */ + default: + newlen++; + break; + case ' ': + if(left) + newlen+=3; + else + newlen++; + break; + } + } + return newlen; +} + +/* strcpy_url() copies a url to a output buffer and URL-encodes the spaces in + * the source URL accordingly. + */ +static void strcpy_url(char *output, const char *url) +{ + /* we must add this with whitespace-replacing */ + bool left=TRUE; + const char *iptr; + char *optr = output; + for(iptr = url; /* read from here */ + *iptr; /* until zero byte */ + iptr++) { + switch(*iptr) { + case '?': + left=FALSE; + /* fall through */ + default: + *optr++=*iptr; + break; + case ' ': + if(left) { + *optr++='%'; /* add a '%' */ + *optr++='2'; /* add a '2' */ + *optr++='0'; /* add a '0' */ + } + else + *optr++='+'; /* add a '+' here */ + break; + } + } + *optr=0; /* zero terminate output buffer */ + +} + +/* + * Returns true if the given URL is absolute (as opposed to relative) + */ +static bool is_absolute_url(const char *url) +{ + char prot[16]; /* URL protocol string storage */ + char letter; /* used for a silly sscanf */ + + return (2 == sscanf(url, "%15[^?&/:]://%c", prot, &letter)) ? TRUE : FALSE; +} + +/* + * Concatenate a relative URL to a base URL making it absolute. + * URL-encodes any spaces. + * The returned pointer must be freed by the caller unless NULL + * (returns NULL on out of memory). + */ +static char *concat_url(const char *base, const char *relurl) +{ + /*** + TRY to append this new path to the old URL + to the right of the host part. Oh crap, this is doomed to cause + problems in the future... + */ + char *newest; + char *protsep; + char *pathsep; + size_t newlen; + + const char *useurl = relurl; + size_t urllen; + + /* we must make our own copy of the URL to play with, as it may + point to read-only data */ + char *url_clone=strdup(base); + + if(!url_clone) + return NULL; /* skip out of this NOW */ + + /* protsep points to the start of the host name */ + protsep=strstr(url_clone, "//"); + if(!protsep) + protsep=url_clone; + else + protsep+=2; /* pass the slashes */ + + if('/' != relurl[0]) { + int level=0; + + /* First we need to find out if there's a ?-letter in the URL, + and cut it and the right-side of that off */ + pathsep = strchr(protsep, '?'); + if(pathsep) + *pathsep=0; + + /* we have a relative path to append to the last slash if there's one + available, or if the new URL is just a query string (starts with a + '?') we append the new one at the end of the entire currently worked + out URL */ + if(useurl[0] != '?') { + pathsep = strrchr(protsep, '/'); + if(pathsep) + *pathsep=0; + } + + /* Check if there's any slash after the host name, and if so, remember + that position instead */ + pathsep = strchr(protsep, '/'); + if(pathsep) + protsep = pathsep+1; + else + protsep = NULL; + + /* now deal with one "./" or any amount of "../" in the newurl + and act accordingly */ + + if((useurl[0] == '.') && (useurl[1] == '/')) + useurl+=2; /* just skip the "./" */ + + while((useurl[0] == '.') && + (useurl[1] == '.') && + (useurl[2] == '/')) { + level++; + useurl+=3; /* pass the "../" */ + } + + if(protsep) { + while(level--) { + /* cut off one more level from the right of the original URL */ + pathsep = strrchr(protsep, '/'); + if(pathsep) + *pathsep=0; + else { + *protsep=0; + break; + } + } + } + } + else { + /* We got a new absolute path for this server */ + + if((relurl[0] == '/') && (relurl[1] == '/')) { + /* the new URL starts with //, just keep the protocol part from the + original one */ + *protsep=0; + useurl = &relurl[2]; /* we keep the slashes from the original, so we + skip the new ones */ + } + else { + /* cut off the original URL from the first slash, or deal with URLs + without slash */ + pathsep = strchr(protsep, '/'); + if(pathsep) { + /* When people use badly formatted URLs, such as + "http://www.url.com?dir=/home/daniel" we must not use the first + slash, if there's a ?-letter before it! */ + char *sep = strchr(protsep, '?'); + if(sep && (sep < pathsep)) + pathsep = sep; + *pathsep=0; + } + else { + /* There was no slash. Now, since we might be operating on a badly + formatted URL, such as "http://www.url.com?id=2380" which doesn't + use a slash separator as it is supposed to, we need to check for a + ?-letter as well! */ + pathsep = strchr(protsep, '?'); + if(pathsep) + *pathsep=0; + } + } + } + + /* If the new part contains a space, this is a mighty stupid redirect + but we still make an effort to do "right". To the left of a '?' + letter we replace each space with %20 while it is replaced with '+' + on the right side of the '?' letter. + */ + newlen = strlen_url(useurl); + + urllen = strlen(url_clone); + + newest = malloc(urllen + 1 + /* possible slash */ + newlen + 1 /* zero byte */); + + if(!newest) { + free(url_clone); /* don't leak this */ + return NULL; + } + + /* copy over the root url part */ + memcpy(newest, url_clone, urllen); + + /* check if we need to append a slash */ + if(('/' == useurl[0]) || (protsep && !*protsep) || ('?' == useurl[0])) + ; + else + newest[urllen++]='/'; + + /* then append the new piece on the right side */ + strcpy_url(&newest[urllen], useurl); + + free(url_clone); + + return newest; +} +#endif /* CURL_DISABLE_HTTP */ + +/* + * Curl_follow() handles the URL redirect magic. Pass in the 'newurl' string + * as given by the remote server and set up the new URL to request. + */ +CURLcode Curl_follow(struct SessionHandle *data, + char *newurl, /* this 'newurl' is the Location: string, + and it must be malloc()ed before passed + here */ + followtype type) /* see transfer.h */ +{ +#ifdef CURL_DISABLE_HTTP + (void)data; + (void)newurl; + (void)type; + /* Location: following will not happen when HTTP is disabled */ + return CURLE_TOO_MANY_REDIRECTS; +#else + + /* Location: redirect */ + bool disallowport = FALSE; + + if(type == FOLLOW_REDIR) { + if((data->set.maxredirs != -1) && + (data->set.followlocation >= data->set.maxredirs)) { + failf(data,"Maximum (%ld) redirects followed", data->set.maxredirs); + return CURLE_TOO_MANY_REDIRECTS; + } + + /* mark the next request as a followed location: */ + data->state.this_is_a_follow = TRUE; + + data->set.followlocation++; /* count location-followers */ + + if(data->set.http_auto_referer) { + /* We are asked to automatically set the previous URL as the referer + when we get the next URL. We pick the ->url field, which may or may + not be 100% correct */ + + if(data->change.referer_alloc) { + Curl_safefree(data->change.referer); + data->change.referer_alloc = FALSE; + } + + data->change.referer = strdup(data->change.url); + if(!data->change.referer) + return CURLE_OUT_OF_MEMORY; + data->change.referer_alloc = TRUE; /* yes, free this later */ + } + } + + if(!is_absolute_url(newurl)) { + /*** + *DANG* this is an RFC 2068 violation. The URL is supposed + to be absolute and this doesn't seem to be that! + */ + char *absolute = concat_url(data->change.url, newurl); + if(!absolute) + return CURLE_OUT_OF_MEMORY; + free(newurl); + newurl = absolute; + } + else { + /* This is an absolute URL, don't allow the custom port number */ + disallowport = TRUE; + + if(strchr(newurl, ' ')) { + /* This new URL contains at least one space, this is a mighty stupid + redirect but we still make an effort to do "right". */ + char *newest; + size_t newlen = strlen_url(newurl); + + newest = malloc(newlen+1); /* get memory for this */ + if(!newest) + return CURLE_OUT_OF_MEMORY; + strcpy_url(newest, newurl); /* create a space-free URL */ + + free(newurl); /* that was no good */ + newurl = newest; /* use this instead now */ + } + + } + + if(type == FOLLOW_FAKE) { + /* we're only figuring out the new url if we would've followed locations + but now we're done so we can get out! */ + data->info.wouldredirect = newurl; + return CURLE_OK; + } + + if(disallowport) + data->state.allow_port = FALSE; + + if(data->change.url_alloc) { + Curl_safefree(data->change.url); + data->change.url_alloc = FALSE; + } + + data->change.url = newurl; + data->change.url_alloc = TRUE; + newurl = NULL; /* don't free! */ + + infof(data, "Issue another request to this URL: '%s'\n", data->change.url); + + /* + * We get here when the HTTP code is 300-399 (and 401). We need to perform + * differently based on exactly what return code there was. + * + * News from 7.10.6: we can also get here on a 401 or 407, in case we act on + * a HTTP (proxy-) authentication scheme other than Basic. + */ + switch(data->info.httpcode) { + /* 401 - Act on a WWW-Authenticate, we keep on moving and do the + Authorization: XXXX header in the HTTP request code snippet */ + /* 407 - Act on a Proxy-Authenticate, we keep on moving and do the + Proxy-Authorization: XXXX header in the HTTP request code snippet */ + /* 300 - Multiple Choices */ + /* 306 - Not used */ + /* 307 - Temporary Redirect */ + default: /* for all above (and the unknown ones) */ + /* Some codes are explicitly mentioned since I've checked RFC2616 and they + * seem to be OK to POST to. + */ + break; + case 301: /* Moved Permanently */ + /* (quote from RFC2616, section 10.3.2): + * + * When automatically redirecting a POST request after receiving a 301 + * status code, some existing HTTP/1.0 user agents will erroneously change + * it into a GET request. + * + * ---- + * + * As most of the important user agents do this obvious RFC2616 violation, + * many webservers expect this. So these servers often answers to a POST + * request with an error page. To be sure that libcurl gets the page that + * most user agents would get, libcurl has to force GET. + * + * This behavior can be overridden with CURLOPT_POSTREDIR. + */ + if((data->set.httpreq == HTTPREQ_POST + || data->set.httpreq == HTTPREQ_POST_FORM) + && !(data->set.keep_post & CURL_REDIR_POST_301)) { + infof(data, + "Violate RFC 2616/10.3.2 and switch from POST to GET\n"); + data->set.httpreq = HTTPREQ_GET; + } + break; + case 302: /* Found */ + /* (From 10.3.3) + + Note: RFC 1945 and RFC 2068 specify that the client is not allowed + to change the method on the redirected request. However, most + existing user agent implementations treat 302 as if it were a 303 + response, performing a GET on the Location field-value regardless + of the original request method. The status codes 303 and 307 have + been added for servers that wish to make unambiguously clear which + kind of reaction is expected of the client. + + (From 10.3.4) + + Note: Many pre-HTTP/1.1 user agents do not understand the 303 + status. When interoperability with such clients is a concern, the + 302 status code may be used instead, since most user agents react + to a 302 response as described here for 303. + + This behavior can be overridden with CURLOPT_POSTREDIR + */ + if((data->set.httpreq == HTTPREQ_POST + || data->set.httpreq == HTTPREQ_POST_FORM) + && !(data->set.keep_post & CURL_REDIR_POST_302)) { + infof(data, + "Violate RFC 2616/10.3.3 and switch from POST to GET\n"); + data->set.httpreq = HTTPREQ_GET; + } + break; + + case 303: /* See Other */ + /* Disable both types of POSTs, unless the user explicitely + asks for POST after POST */ + if(data->set.httpreq != HTTPREQ_GET + && !(data->set.keep_post & CURL_REDIR_POST_303)) { + data->set.httpreq = HTTPREQ_GET; /* enforce GET request */ + infof(data, "Disables POST, goes with %s\n", + data->set.opt_no_body?"HEAD":"GET"); + } + break; + case 304: /* Not Modified */ + /* 304 means we did a conditional request and it was "Not modified". + * We shouldn't get any Location: header in this response! + */ + break; + case 305: /* Use Proxy */ + /* (quote from RFC2616, section 10.3.6): + * "The requested resource MUST be accessed through the proxy given + * by the Location field. The Location field gives the URI of the + * proxy. The recipient is expected to repeat this single request + * via the proxy. 305 responses MUST only be generated by origin + * servers." + */ + break; + } + Curl_pgrsTime(data, TIMER_REDIRECT); + Curl_pgrsResetTimesSizes(data); + + return CURLE_OK; +#endif /* CURL_DISABLE_HTTP */ +} + +CURLcode +Curl_reconnect_request(struct connectdata **connp) +{ + CURLcode result = CURLE_OK; + struct connectdata *conn = *connp; + struct SessionHandle *data = conn->data; + + /* This was a re-use of a connection and we got a write error in the + * DO-phase. Then we DISCONNECT this connection and have another attempt to + * CONNECT and then DO again! The retry cannot possibly find another + * connection to re-use, since we only keep one possible connection for + * each. */ + + infof(data, "Re-used connection seems dead, get a new one\n"); + + conn->bits.close = TRUE; /* enforce close of this connection */ + result = Curl_done(&conn, result, FALSE); /* we are so done with this */ + + /* conn may no longer be a good pointer, clear it to avoid mistakes by + parent functions */ + *connp = NULL; + + /* + * According to bug report #1330310. We need to check for CURLE_SEND_ERROR + * here as well. I figure this could happen when the request failed on a FTP + * connection and thus Curl_done() itself tried to use the connection + * (again). Slight Lack of feedback in the report, but I don't think this + * extra check can do much harm. + */ + if((CURLE_OK == result) || (CURLE_SEND_ERROR == result)) { + bool async; + bool protocol_done = TRUE; + + /* Now, redo the connect and get a new connection */ + result = Curl_connect(data, connp, &async, &protocol_done); + if(CURLE_OK == result) { + /* We have connected or sent away a name resolve query fine */ + + conn = *connp; /* setup conn to again point to something nice */ + if(async) { + /* Now, if async is TRUE here, we need to wait for the name + to resolve */ + result = Curl_resolver_wait_resolv(conn, NULL); + if(result) + return result; + + /* Resolved, continue with the connection */ + result = Curl_async_resolved(conn, &protocol_done); + if(result) + return result; + } + } + } + + return result; +} + +/* Returns CURLE_OK *and* sets '*url' if a request retry is wanted. + + NOTE: that the *url is malloc()ed. */ +CURLcode Curl_retry_request(struct connectdata *conn, + char **url) +{ + struct SessionHandle *data = conn->data; + + *url = NULL; + + /* if we're talking upload, we can't do the checks below, unless the protocol + is HTTP as when uploading over HTTP we will still get a response */ + if(data->set.upload && + !(conn->handler->protocol&(CURLPROTO_HTTP|CURLPROTO_RTSP))) + return CURLE_OK; + + if(/* workaround for broken TLS servers */ data->state.ssl_connect_retry || + ((data->req.bytecount + + data->req.headerbytecount == 0) && + conn->bits.reuse && + !data->set.opt_no_body && + data->set.rtspreq != RTSPREQ_RECEIVE)) { + /* We got no data, we attempted to re-use a connection and yet we want a + "body". This might happen if the connection was left alive when we were + done using it before, but that was closed when we wanted to read from + it again. Bad luck. Retry the same request on a fresh connect! */ + infof(conn->data, "Connection died, retrying a fresh connect\n"); + *url = strdup(conn->data->change.url); + if(!*url) + return CURLE_OUT_OF_MEMORY; + + conn->bits.close = TRUE; /* close this connection */ + conn->bits.retry = TRUE; /* mark this as a connection we're about + to retry. Marking it this way should + prevent i.e HTTP transfers to return + error just because nothing has been + transferred! */ + + + if((conn->handler->protocol&CURLPROTO_HTTP) && + data->state.proto.http->writebytecount) + return Curl_readrewind(conn); + } + return CURLE_OK; +} + +/* + * Curl_setup_transfer() is called to setup some basic properties for the + * upcoming transfer. + */ +void +Curl_setup_transfer( + struct connectdata *conn, /* connection data */ + int sockindex, /* socket index to read from or -1 */ + curl_off_t size, /* -1 if unknown at this point */ + bool getheader, /* TRUE if header parsing is wanted */ + curl_off_t *bytecountp, /* return number of bytes read or NULL */ + int writesockindex, /* socket index to write to, it may very well be + the same we read from. -1 disables */ + curl_off_t *writecountp /* return number of bytes written or NULL */ + ) +{ + struct SessionHandle *data; + struct SingleRequest *k; + + DEBUGASSERT(conn != NULL); + + data = conn->data; + k = &data->req; + + DEBUGASSERT((sockindex <= 1) && (sockindex >= -1)); + + /* now copy all input parameters */ + conn->sockfd = sockindex == -1 ? + CURL_SOCKET_BAD : conn->sock[sockindex]; + conn->writesockfd = writesockindex == -1 ? + CURL_SOCKET_BAD:conn->sock[writesockindex]; + k->getheader = getheader; + + k->size = size; + k->bytecountp = bytecountp; + k->writebytecountp = writecountp; + + /* The code sequence below is placed in this function just because all + necessary input is not always known in do_complete() as this function may + be called after that */ + + if(!k->getheader) { + k->header = FALSE; + if(size > 0) + Curl_pgrsSetDownloadSize(data, size); + } + /* we want header and/or body, if neither then don't do this! */ + if(k->getheader || !data->set.opt_no_body) { + + if(conn->sockfd != CURL_SOCKET_BAD) + k->keepon |= KEEP_RECV; + + if(conn->writesockfd != CURL_SOCKET_BAD) { + /* HTTP 1.1 magic: + + Even if we require a 100-return code before uploading data, we might + need to write data before that since the REQUEST may not have been + finished sent off just yet. + + Thus, we must check if the request has been sent before we set the + state info where we wait for the 100-return code + */ + if((data->state.expect100header) && + (data->state.proto.http->sending == HTTPSEND_BODY)) { + /* wait with write until we either got 100-continue or a timeout */ + k->exp100 = EXP100_AWAITING_CONTINUE; + k->start100 = Curl_tvnow(); + + /* set a timeout for the multi interface */ + Curl_expire(data, CURL_TIMEOUT_EXPECT_100); + } + else { + if(data->state.expect100header) + /* when we've sent off the rest of the headers, we must await a + 100-continue but first finish sending the request */ + k->exp100 = EXP100_SENDING_REQUEST; + + /* enable the write bit when we're not waiting for continue */ + k->keepon |= KEEP_SEND; + } + } /* if(conn->writesockfd != CURL_SOCKET_BAD) */ + } /* if(k->getheader || !data->set.opt_no_body) */ + +} |