diff options
Diffstat (limited to 'plugins/FTPFileYM/curl/curl.h')
| -rw-r--r-- | plugins/FTPFileYM/curl/curl.h | 1919 |
1 files changed, 1919 insertions, 0 deletions
diff --git a/plugins/FTPFileYM/curl/curl.h b/plugins/FTPFileYM/curl/curl.h new file mode 100644 index 0000000000..973fdcc49d --- /dev/null +++ b/plugins/FTPFileYM/curl/curl.h @@ -0,0 +1,1919 @@ +#ifndef __CURL_CURL_H +#define __CURL_CURL_H +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at http://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + * $Id: curl.h,v 1.390 2009-08-11 14:07:08 patrickm Exp $ + ***************************************************************************/ + +/* + * If you have libcurl problems, all docs and details are found here: + * http://curl.haxx.se/libcurl/ + * + * curl-library mailing list subscription and unsubscription web interface: + * http://cool.haxx.se/mailman/listinfo/curl-library/ + */ + +#include "curlver.h" /* libcurl version defines */ +#include "curl/curlbuild.h" /* libcurl build definitions */ +#include "curlrules.h" /* libcurl rules enforcement */ + +/* + * Define WIN32 when build target is Win32 API + */ + +#if (defined(_WIN32) || defined(__WIN32__)) && \ + !defined(WIN32) && !defined(__SYMBIAN32__) +#define WIN32 +#endif + +#include <stdio.h> +#include <limits.h> + +/* The include stuff here below is mainly for time_t! */ +#include <sys/types.h> +#include <time.h> + +#if defined(WIN32) && !defined(_WIN32_WCE) && !defined(__GNUC__) && \ + !defined(__CYGWIN__) || defined(__MINGW32__) +#if !(defined(_WINSOCKAPI_) || defined(_WINSOCK_H)) +/* The check above prevents the winsock2 inclusion if winsock.h already was + included, since they can't co-exist without problems */ +#include <winsock2.h> +#include <ws2tcpip.h> +#endif +#else + +/* HP-UX systems version 9, 10 and 11 lack sys/select.h and so does oldish + libc5-based Linux systems. Only include it on system that are known to + require it! */ +#if defined(_AIX) || defined(__NOVELL_LIBC__) || defined(__NetBSD__) || \ + defined(__minix) || defined(__SYMBIAN32__) || defined(__INTEGRITY) || \ + defined(ANDROID) +#include <sys/select.h> +#endif + +#ifndef _WIN32_WCE +#include <sys/socket.h> +#endif +#if !defined(WIN32) && !defined(__WATCOMC__) && !defined(__VXWORKS__) +#include <sys/time.h> +#endif +#include <sys/types.h> +#endif + +#ifdef __BEOS__ +#include <support/SupportDefs.h> +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +typedef void CURL; + +/* + * Decorate exportable functions for Win32 and Symbian OS DLL linking. + * This avoids using a .def file for building libcurl.dll. + */ +#if (defined(WIN32) || defined(_WIN32) || defined(__SYMBIAN32__)) && \ + !defined(CURL_STATICLIB) +#if defined(BUILDING_LIBCURL) +#define CURL_EXTERN __declspec(dllexport) +#else +#define CURL_EXTERN __declspec(dllimport) +#endif +#else + +#ifdef CURL_HIDDEN_SYMBOLS +/* + * This definition is used to make external definitions visible in the + * shared library when symbols are hidden by default. It makes no + * difference when compiling applications whether this is set or not, + * only when compiling the library. + */ +#define CURL_EXTERN CURL_EXTERN_SYMBOL +#else +#define CURL_EXTERN +#endif +#endif + +#ifndef curl_socket_typedef +/* socket typedef */ +#ifdef WIN32 +typedef SOCKET curl_socket_t; +#define CURL_SOCKET_BAD INVALID_SOCKET +#else +typedef int curl_socket_t; +#define CURL_SOCKET_BAD -1 +#endif +#define curl_socket_typedef +#endif /* curl_socket_typedef */ + +struct curl_httppost { + struct curl_httppost *next; /* next entry in the list */ + char *name; /* pointer to allocated name */ + long namelength; /* length of name length */ + char *contents; /* pointer to allocated data contents */ + long contentslength; /* length of contents field */ + char *buffer; /* pointer to allocated buffer contents */ + long bufferlength; /* length of buffer field */ + char *contenttype; /* Content-Type */ + struct curl_slist* contentheader; /* list of extra headers for this form */ + struct curl_httppost *more; /* if one field name has more than one + file, this link should link to following + files */ + long flags; /* as defined below */ +#define HTTPPOST_FILENAME (1<<0) /* specified content is a file name */ +#define HTTPPOST_READFILE (1<<1) /* specified content is a file name */ +#define HTTPPOST_PTRNAME (1<<2) /* name is only stored pointer + do not free in formfree */ +#define HTTPPOST_PTRCONTENTS (1<<3) /* contents is only stored pointer + do not free in formfree */ +#define HTTPPOST_BUFFER (1<<4) /* upload file from buffer */ +#define HTTPPOST_PTRBUFFER (1<<5) /* upload file from pointer contents */ +#define HTTPPOST_CALLBACK (1<<6) /* upload file contents by using the + regular read callback to get the data + and pass the given pointer as custom + pointer */ + + char *showfilename; /* The file name to show. If not set, the + actual file name will be used (if this + is a file part) */ + void *userp; /* custom pointer used for + HTTPPOST_CALLBACK posts */ +}; + +typedef int (*curl_progress_callback)(void *clientp, + double dltotal, + double dlnow, + double ultotal, + double ulnow); + +#ifndef CURL_MAX_WRITE_SIZE + /* Tests have proven that 20K is a very bad buffer size for uploads on + Windows, while 16K for some odd reason performed a lot better. + We do the ifndef check to allow this value to easier be changed at build + time for those who feel adventurous. */ +#define CURL_MAX_WRITE_SIZE 16384 +#endif +/* This is a magic return code for the write callback that, when returned, + will signal libcurl to pause receiving on the current transfer. */ +#define CURL_WRITEFUNC_PAUSE 0x10000001 +typedef size_t (*curl_write_callback)(char *buffer, + size_t size, + size_t nitems, + void *outstream); + +/* These are the return codes for the seek callbacks */ +#define CURL_SEEKFUNC_OK 0 +#define CURL_SEEKFUNC_FAIL 1 /* fail the entire transfer */ +#define CURL_SEEKFUNC_CANTSEEK 2 /* tell libcurl seeking can't be done, so + libcurl might try other means instead */ +typedef int (*curl_seek_callback)(void *instream, + curl_off_t offset, + int origin); /* 'whence' */ + +/* This is a return code for the read callback that, when returned, will + signal libcurl to immediately abort the current transfer. */ +#define CURL_READFUNC_ABORT 0x10000000 +/* This is a return code for the read callback that, when returned, will + signal libcurl to pause sending data on the current transfer. */ +#define CURL_READFUNC_PAUSE 0x10000001 + +typedef size_t (*curl_read_callback)(char *buffer, + size_t size, + size_t nitems, + void *instream); + +typedef enum { + CURLSOCKTYPE_IPCXN, /* socket created for a specific IP connection */ + CURLSOCKTYPE_LAST /* never use */ +} curlsocktype; + +typedef int (*curl_sockopt_callback)(void *clientp, + curl_socket_t curlfd, + curlsocktype purpose); + +struct curl_sockaddr { + int family; + int socktype; + int protocol; + unsigned int addrlen; /* addrlen was a socklen_t type before 7.18.0 but it + turned really ugly and painful on the systems that + lack this type */ + struct sockaddr addr; +}; + +typedef curl_socket_t +(*curl_opensocket_callback)(void *clientp, + curlsocktype purpose, + struct curl_sockaddr *address); + +#ifndef CURL_NO_OLDIES + /* not used since 7.10.8, will be removed in a future release */ +typedef int (*curl_passwd_callback)(void *clientp, + const char *prompt, + char *buffer, + int buflen); +#endif + +typedef enum { + CURLIOE_OK, /* I/O operation successful */ + CURLIOE_UNKNOWNCMD, /* command was unknown to callback */ + CURLIOE_FAILRESTART, /* failed to restart the read */ + CURLIOE_LAST /* never use */ +} curlioerr; + +typedef enum { + CURLIOCMD_NOP, /* no operation */ + CURLIOCMD_RESTARTREAD, /* restart the read stream from start */ + CURLIOCMD_LAST /* never use */ +} curliocmd; + +typedef curlioerr (*curl_ioctl_callback)(CURL *handle, + int cmd, + void *clientp); + +/* + * The following typedef's are signatures of malloc, free, realloc, strdup and + * calloc respectively. Function pointers of these types can be passed to the + * curl_global_init_mem() function to set user defined memory management + * callback routines. + */ +typedef void *(*curl_malloc_callback)(size_t size); +typedef void (*curl_free_callback)(void *ptr); +typedef void *(*curl_realloc_callback)(void *ptr, size_t size); +typedef char *(*curl_strdup_callback)(const char *str); +typedef void *(*curl_calloc_callback)(size_t nmemb, size_t size); + +/* the kind of data that is passed to information_callback*/ +typedef enum { + CURLINFO_TEXT = 0, + CURLINFO_HEADER_IN, /* 1 */ + CURLINFO_HEADER_OUT, /* 2 */ + CURLINFO_DATA_IN, /* 3 */ + CURLINFO_DATA_OUT, /* 4 */ + CURLINFO_SSL_DATA_IN, /* 5 */ + CURLINFO_SSL_DATA_OUT, /* 6 */ + CURLINFO_END +} curl_infotype; + +typedef int (*curl_debug_callback) + (CURL *handle, /* the handle/transfer this concerns */ + curl_infotype type, /* what kind of data */ + char *data, /* points to the data */ + size_t size, /* size of the data pointed to */ + void *userptr); /* whatever the user please */ + +/* All possible error codes from all sorts of curl functions. Future versions + may return other values, stay prepared. + + Always add new return codes last. Never *EVER* remove any. The return + codes must remain the same! + */ + +typedef enum { + CURLE_OK = 0, + CURLE_UNSUPPORTED_PROTOCOL, /* 1 */ + CURLE_FAILED_INIT, /* 2 */ + CURLE_URL_MALFORMAT, /* 3 */ + CURLE_OBSOLETE4, /* 4 - NOT USED */ + CURLE_COULDNT_RESOLVE_PROXY, /* 5 */ + CURLE_COULDNT_RESOLVE_HOST, /* 6 */ + CURLE_COULDNT_CONNECT, /* 7 */ + CURLE_FTP_WEIRD_SERVER_REPLY, /* 8 */ + CURLE_REMOTE_ACCESS_DENIED, /* 9 a service was denied by the server + due to lack of access - when login fails + this is not returned. */ + CURLE_OBSOLETE10, /* 10 - NOT USED */ + CURLE_FTP_WEIRD_PASS_REPLY, /* 11 */ + CURLE_OBSOLETE12, /* 12 - NOT USED */ + CURLE_FTP_WEIRD_PASV_REPLY, /* 13 */ + CURLE_FTP_WEIRD_227_FORMAT, /* 14 */ + CURLE_FTP_CANT_GET_HOST, /* 15 */ + CURLE_OBSOLETE16, /* 16 - NOT USED */ + CURLE_FTP_COULDNT_SET_TYPE, /* 17 */ + CURLE_PARTIAL_FILE, /* 18 */ + CURLE_FTP_COULDNT_RETR_FILE, /* 19 */ + CURLE_OBSOLETE20, /* 20 - NOT USED */ + CURLE_QUOTE_ERROR, /* 21 - quote command failure */ + CURLE_HTTP_RETURNED_ERROR, /* 22 */ + CURLE_WRITE_ERROR, /* 23 */ + CURLE_OBSOLETE24, /* 24 - NOT USED */ + CURLE_UPLOAD_FAILED, /* 25 - failed upload "command" */ + CURLE_READ_ERROR, /* 26 - couldn't open/read from file */ + CURLE_OUT_OF_MEMORY, /* 27 */ + /* Note: CURLE_OUT_OF_MEMORY may sometimes indicate a conversion error + instead of a memory allocation error if CURL_DOES_CONVERSIONS + is defined + */ + CURLE_OPERATION_TIMEDOUT, /* 28 - the timeout time was reached */ + CURLE_OBSOLETE29, /* 29 - NOT USED */ + CURLE_FTP_PORT_FAILED, /* 30 - FTP PORT operation failed */ + CURLE_FTP_COULDNT_USE_REST, /* 31 - the REST command failed */ + CURLE_OBSOLETE32, /* 32 - NOT USED */ + CURLE_RANGE_ERROR, /* 33 - RANGE "command" didn't work */ + CURLE_HTTP_POST_ERROR, /* 34 */ + CURLE_SSL_CONNECT_ERROR, /* 35 - wrong when connecting with SSL */ + CURLE_BAD_DOWNLOAD_RESUME, /* 36 - couldn't resume download */ + CURLE_FILE_COULDNT_READ_FILE, /* 37 */ + CURLE_LDAP_CANNOT_BIND, /* 38 */ + CURLE_LDAP_SEARCH_FAILED, /* 39 */ + CURLE_OBSOLETE40, /* 40 - NOT USED */ + CURLE_FUNCTION_NOT_FOUND, /* 41 */ + CURLE_ABORTED_BY_CALLBACK, /* 42 */ + CURLE_BAD_FUNCTION_ARGUMENT, /* 43 */ + CURLE_OBSOLETE44, /* 44 - NOT USED */ + CURLE_INTERFACE_FAILED, /* 45 - CURLOPT_INTERFACE failed */ + CURLE_OBSOLETE46, /* 46 - NOT USED */ + CURLE_TOO_MANY_REDIRECTS , /* 47 - catch endless re-direct loops */ + CURLE_UNKNOWN_TELNET_OPTION, /* 48 - User specified an unknown option */ + CURLE_TELNET_OPTION_SYNTAX , /* 49 - Malformed telnet option */ + CURLE_OBSOLETE50, /* 50 - NOT USED */ + CURLE_PEER_FAILED_VERIFICATION, /* 51 - peer's certificate or fingerprint + wasn't verified fine */ + CURLE_GOT_NOTHING, /* 52 - when this is a specific error */ + CURLE_SSL_ENGINE_NOTFOUND, /* 53 - SSL crypto engine not found */ + CURLE_SSL_ENGINE_SETFAILED, /* 54 - can not set SSL crypto engine as + default */ + CURLE_SEND_ERROR, /* 55 - failed sending network data */ + CURLE_RECV_ERROR, /* 56 - failure in receiving network data */ + CURLE_OBSOLETE57, /* 57 - NOT IN USE */ + CURLE_SSL_CERTPROBLEM, /* 58 - problem with the local certificate */ + CURLE_SSL_CIPHER, /* 59 - couldn't use specified cipher */ + CURLE_SSL_CACERT, /* 60 - problem with the CA cert (path?) */ + CURLE_BAD_CONTENT_ENCODING, /* 61 - Unrecognized transfer encoding */ + CURLE_LDAP_INVALID_URL, /* 62 - Invalid LDAP URL */ + CURLE_FILESIZE_EXCEEDED, /* 63 - Maximum file size exceeded */ + CURLE_USE_SSL_FAILED, /* 64 - Requested FTP SSL level failed */ + CURLE_SEND_FAIL_REWIND, /* 65 - Sending the data requires a rewind + that failed */ + CURLE_SSL_ENGINE_INITFAILED, /* 66 - failed to initialise ENGINE */ + CURLE_LOGIN_DENIED, /* 67 - user, password or similar was not + accepted and we failed to login */ + CURLE_TFTP_NOTFOUND, /* 68 - file not found on server */ + CURLE_TFTP_PERM, /* 69 - permission problem on server */ + CURLE_REMOTE_DISK_FULL, /* 70 - out of disk space on server */ + CURLE_TFTP_ILLEGAL, /* 71 - Illegal TFTP operation */ + CURLE_TFTP_UNKNOWNID, /* 72 - Unknown transfer ID */ + CURLE_REMOTE_FILE_EXISTS, /* 73 - File already exists */ + CURLE_TFTP_NOSUCHUSER, /* 74 - No such user */ + CURLE_CONV_FAILED, /* 75 - conversion failed */ + CURLE_CONV_REQD, /* 76 - caller must register conversion + callbacks using curl_easy_setopt options + CURLOPT_CONV_FROM_NETWORK_FUNCTION, + CURLOPT_CONV_TO_NETWORK_FUNCTION, and + CURLOPT_CONV_FROM_UTF8_FUNCTION */ + CURLE_SSL_CACERT_BADFILE, /* 77 - could not load CACERT file, missing + or wrong format */ + CURLE_REMOTE_FILE_NOT_FOUND, /* 78 - remote file not found */ + CURLE_SSH, /* 79 - error from the SSH layer, somewhat + generic so the error message will be of + interest when this has happened */ + + CURLE_SSL_SHUTDOWN_FAILED, /* 80 - Failed to shut down the SSL + connection */ + CURLE_AGAIN, /* 81 - socket is not ready for send/recv, + wait till it's ready and try again (Added + in 7.18.2) */ + CURLE_SSL_CRL_BADFILE, /* 82 - could not load CRL file, missing or + wrong format (Added in 7.19.0) */ + CURLE_SSL_ISSUER_ERROR, /* 83 - Issuer check failed. (Added in + 7.19.0) */ + CURL_LAST /* never use! */ +} CURLcode; + +#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all + the obsolete stuff removed! */ + +/* Backwards compatibility with older names */ + +/* The following were added in 7.17.1 */ +/* These are scheduled to disappear by 2009 */ +#define CURLE_SSL_PEER_CERTIFICATE CURLE_PEER_FAILED_VERIFICATION + +/* The following were added in 7.17.0 */ +/* These are scheduled to disappear by 2009 */ +#define CURLE_OBSOLETE CURLE_OBSOLETE50 /* noone should be using this! */ +#define CURLE_BAD_PASSWORD_ENTERED CURLE_OBSOLETE46 +#define CURLE_BAD_CALLING_ORDER CURLE_OBSOLETE44 +#define CURLE_FTP_USER_PASSWORD_INCORRECT CURLE_OBSOLETE10 +#define CURLE_FTP_CANT_RECONNECT CURLE_OBSOLETE16 +#define CURLE_FTP_COULDNT_GET_SIZE CURLE_OBSOLETE32 +#define CURLE_FTP_COULDNT_SET_ASCII CURLE_OBSOLETE29 +#define CURLE_FTP_WEIRD_USER_REPLY CURLE_OBSOLETE12 +#define CURLE_FTP_WRITE_ERROR CURLE_OBSOLETE20 +#define CURLE_LIBRARY_NOT_FOUND CURLE_OBSOLETE40 +#define CURLE_MALFORMAT_USER CURLE_OBSOLETE24 +#define CURLE_SHARE_IN_USE CURLE_OBSOLETE57 +#define CURLE_URL_MALFORMAT_USER CURLE_OBSOLETE4 + +#define CURLE_FTP_ACCESS_DENIED CURLE_REMOTE_ACCESS_DENIED +#define CURLE_FTP_COULDNT_SET_BINARY CURLE_FTP_COULDNT_SET_TYPE +#define CURLE_FTP_QUOTE_ERROR CURLE_QUOTE_ERROR +#define CURLE_TFTP_DISKFULL CURLE_REMOTE_DISK_FULL +#define CURLE_TFTP_EXISTS CURLE_REMOTE_FILE_EXISTS +#define CURLE_HTTP_RANGE_ERROR CURLE_RANGE_ERROR +#define CURLE_FTP_SSL_FAILED CURLE_USE_SSL_FAILED + +/* The following were added earlier */ + +#define CURLE_OPERATION_TIMEOUTED CURLE_OPERATION_TIMEDOUT + +#define CURLE_HTTP_NOT_FOUND CURLE_HTTP_RETURNED_ERROR +#define CURLE_HTTP_PORT_FAILED CURLE_INTERFACE_FAILED +#define CURLE_FTP_COULDNT_STOR_FILE CURLE_UPLOAD_FAILED + +#define CURLE_FTP_PARTIAL_FILE CURLE_PARTIAL_FILE +#define CURLE_FTP_BAD_DOWNLOAD_RESUME CURLE_BAD_DOWNLOAD_RESUME + +/* This was the error code 50 in 7.7.3 and a few earlier versions, this + is no longer used by libcurl but is instead #defined here only to not + make programs break */ +#define CURLE_ALREADY_COMPLETE 99999 + +#endif /*!CURL_NO_OLDIES*/ + +/* This prototype applies to all conversion callbacks */ +typedef CURLcode (*curl_conv_callback)(char *buffer, size_t length); + +typedef CURLcode (*curl_ssl_ctx_callback)(CURL *curl, /* easy handle */ + void *ssl_ctx, /* actually an + OpenSSL SSL_CTX */ + void *userptr); + +typedef enum { + CURLPROXY_HTTP = 0, /* added in 7.10, new in 7.19.4 default is to use + CONNECT HTTP/1.1 */ + CURLPROXY_HTTP_1_0 = 1, /* added in 7.19.4, force to use CONNECT + HTTP/1.0 */ + CURLPROXY_SOCKS4 = 4, /* support added in 7.15.2, enum existed already + in 7.10 */ + CURLPROXY_SOCKS5 = 5, /* added in 7.10 */ + CURLPROXY_SOCKS4A = 6, /* added in 7.18.0 */ + CURLPROXY_SOCKS5_HOSTNAME = 7 /* Use the SOCKS5 protocol but pass along the + host name rather than the IP address. added + in 7.18.0 */ +} curl_proxytype; /* this enum was added in 7.10 */ + +#define CURLAUTH_NONE 0 /* nothing */ +#define CURLAUTH_BASIC (1<<0) /* Basic (default) */ +#define CURLAUTH_DIGEST (1<<1) /* Digest */ +#define CURLAUTH_GSSNEGOTIATE (1<<2) /* GSS-Negotiate */ +#define CURLAUTH_NTLM (1<<3) /* NTLM */ +#define CURLAUTH_DIGEST_IE (1<<4) /* Digest with IE flavour */ +#define CURLAUTH_ANY (~CURLAUTH_DIGEST_IE) /* all fine types set */ +#define CURLAUTH_ANYSAFE (~(CURLAUTH_BASIC|CURLAUTH_DIGEST_IE)) + +#define CURLSSH_AUTH_ANY ~0 /* all types supported by the server */ +#define CURLSSH_AUTH_NONE 0 /* none allowed, silly but complete */ +#define CURLSSH_AUTH_PUBLICKEY (1<<0) /* public/private key files */ +#define CURLSSH_AUTH_PASSWORD (1<<1) /* password */ +#define CURLSSH_AUTH_HOST (1<<2) /* host key files */ +#define CURLSSH_AUTH_KEYBOARD (1<<3) /* keyboard interactive */ +#define CURLSSH_AUTH_DEFAULT CURLSSH_AUTH_ANY + +#define CURL_ERROR_SIZE 256 + +struct curl_khkey { + const char *key; /* points to a zero-terminated string encoded with base64 + if len is zero, otherwise to the "raw" data */ + size_t len; + enum type { + CURLKHTYPE_UNKNOWN, + CURLKHTYPE_RSA1, + CURLKHTYPE_RSA, + CURLKHTYPE_DSS + } keytype; +}; + +/* this is the set of return values expected from the curl_sshkeycallback + callback */ +enum curl_khstat { + CURLKHSTAT_FINE_ADD_TO_FILE, + CURLKHSTAT_FINE, + CURLKHSTAT_REJECT, /* reject the connection, return an error */ + CURLKHSTAT_DEFER, /* do not accept it, but we can't answer right now so + this causes a CURLE_DEFER error but otherwise the + connection will be left intact etc */ + CURLKHSTAT_LAST /* not for use, only a marker for last-in-list */ +}; + +/* this is the set of status codes pass in to the callback */ +enum curl_khmatch { + CURLKHMATCH_OK, /* match */ + CURLKHMATCH_MISMATCH, /* host found, key mismatch! */ + CURLKHMATCH_MISSING, /* no matching host/key found */ + CURLKHMATCH_LAST /* not for use, only a marker for last-in-list */ +}; + +typedef int + (*curl_sshkeycallback) (CURL *easy, /* easy handle */ + const struct curl_khkey *knownkey, /* known */ + const struct curl_khkey *foundkey, /* found */ + enum curl_khmatch, /* libcurl's view on the keys */ + void *clientp); /* custom pointer passed from app */ + +/* parameter for the CURLOPT_USE_SSL option */ +typedef enum { + CURLUSESSL_NONE, /* do not attempt to use SSL */ + CURLUSESSL_TRY, /* try using SSL, proceed anyway otherwise */ + CURLUSESSL_CONTROL, /* SSL for the control connection or fail */ + CURLUSESSL_ALL, /* SSL for all communication or fail */ + CURLUSESSL_LAST /* not an option, never use */ +} curl_usessl; + +#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all + the obsolete stuff removed! */ + +/* Backwards compatibility with older names */ +/* These are scheduled to disappear by 2009 */ + +#define CURLFTPSSL_NONE CURLUSESSL_NONE +#define CURLFTPSSL_TRY CURLUSESSL_TRY +#define CURLFTPSSL_CONTROL CURLUSESSL_CONTROL +#define CURLFTPSSL_ALL CURLUSESSL_ALL +#define CURLFTPSSL_LAST CURLUSESSL_LAST +#define curl_ftpssl curl_usessl +#endif /*!CURL_NO_OLDIES*/ + +/* parameter for the CURLOPT_FTP_SSL_CCC option */ +typedef enum { + CURLFTPSSL_CCC_NONE, /* do not send CCC */ + CURLFTPSSL_CCC_PASSIVE, /* Let the server initiate the shutdown */ + CURLFTPSSL_CCC_ACTIVE, /* Initiate the shutdown */ + CURLFTPSSL_CCC_LAST /* not an option, never use */ +} curl_ftpccc; + +/* parameter for the CURLOPT_FTPSSLAUTH option */ +typedef enum { + CURLFTPAUTH_DEFAULT, /* let libcurl decide */ + CURLFTPAUTH_SSL, /* use "AUTH SSL" */ + CURLFTPAUTH_TLS, /* use "AUTH TLS" */ + CURLFTPAUTH_LAST /* not an option, never use */ +} curl_ftpauth; + +/* parameter for the CURLOPT_FTP_CREATE_MISSING_DIRS option */ +typedef enum { + CURLFTP_CREATE_DIR_NONE, /* do NOT create missing dirs! */ + CURLFTP_CREATE_DIR, /* (FTP/SFTP) if CWD fails, try MKD and then CWD + again if MKD succeeded, for SFTP this does + similar magic */ + CURLFTP_CREATE_DIR_RETRY, /* (FTP only) if CWD fails, try MKD and then CWD + again even if MKD failed! */ + CURLFTP_CREATE_DIR_LAST /* not an option, never use */ +} curl_ftpcreatedir; + +/* parameter for the CURLOPT_FTP_FILEMETHOD option */ +typedef enum { + CURLFTPMETHOD_DEFAULT, /* let libcurl pick */ + CURLFTPMETHOD_MULTICWD, /* single CWD operation for each path part */ + CURLFTPMETHOD_NOCWD, /* no CWD at all */ + CURLFTPMETHOD_SINGLECWD, /* one CWD to full dir, then work on file */ + CURLFTPMETHOD_LAST /* not an option, never use */ +} curl_ftpmethod; + +/* CURLPROTO_ defines are for the CURLOPT_*PROTOCOLS options */ +#define CURLPROTO_HTTP (1<<0) +#define CURLPROTO_HTTPS (1<<1) +#define CURLPROTO_FTP (1<<2) +#define CURLPROTO_FTPS (1<<3) +#define CURLPROTO_SCP (1<<4) +#define CURLPROTO_SFTP (1<<5) +#define CURLPROTO_TELNET (1<<6) +#define CURLPROTO_LDAP (1<<7) +#define CURLPROTO_LDAPS (1<<8) +#define CURLPROTO_DICT (1<<9) +#define CURLPROTO_FILE (1<<10) +#define CURLPROTO_TFTP (1<<11) +#define CURLPROTO_ALL (~0) /* enable everything */ + +/* long may be 32 or 64 bits, but we should never depend on anything else + but 32 */ +#define CURLOPTTYPE_LONG 0 +#define CURLOPTTYPE_OBJECTPOINT 10000 +#define CURLOPTTYPE_FUNCTIONPOINT 20000 +#define CURLOPTTYPE_OFF_T 30000 + +/* name is uppercase CURLOPT_<name>, + type is one of the defined CURLOPTTYPE_<type> + number is unique identifier */ +#ifdef CINIT +#undef CINIT +#endif + +#ifdef CURL_ISOCPP +#define CINIT(name,type,number) CURLOPT_ ## name = CURLOPTTYPE_ ## type + number +#else +/* The macro "##" is ISO C, we assume pre-ISO C doesn't support it. */ +#define LONG CURLOPTTYPE_LONG +#define OBJECTPOINT CURLOPTTYPE_OBJECTPOINT +#define FUNCTIONPOINT CURLOPTTYPE_FUNCTIONPOINT +#define OFF_T CURLOPTTYPE_OFF_T +#define CINIT(name,type,number) CURLOPT_/**/name = type + number +#endif + +/* + * This macro-mania below setups the CURLOPT_[what] enum, to be used with + * curl_easy_setopt(). The first argument in the CINIT() macro is the [what] + * word. + */ + +typedef enum { + /* This is the FILE * or void * the regular output should be written to. */ + CINIT(FILE, OBJECTPOINT, 1), + + /* The full URL to get/put */ + CINIT(URL, OBJECTPOINT, 2), + + /* Port number to connect to, if other than default. */ + CINIT(PORT, LONG, 3), + + /* Name of proxy to use. */ + CINIT(PROXY, OBJECTPOINT, 4), + + /* "name:password" to use when fetching. */ + CINIT(USERPWD, OBJECTPOINT, 5), + + /* "name:password" to use with proxy. */ + CINIT(PROXYUSERPWD, OBJECTPOINT, 6), + + /* Range to get, specified as an ASCII string. */ + CINIT(RANGE, OBJECTPOINT, 7), + + /* not used */ + + /* Specified file stream to upload from (use as input): */ + CINIT(INFILE, OBJECTPOINT, 9), + + /* Buffer to receive error messages in, must be at least CURL_ERROR_SIZE + * bytes big. If this is not used, error messages go to stderr instead: */ + CINIT(ERRORBUFFER, OBJECTPOINT, 10), + + /* Function that will be called to store the output (instead of fwrite). The + * parameters will use fwrite() syntax, make sure to follow them. */ + CINIT(WRITEFUNCTION, FUNCTIONPOINT, 11), + + /* Function that will be called to read the input (instead of fread). The + * parameters will use fread() syntax, make sure to follow them. */ + CINIT(READFUNCTION, FUNCTIONPOINT, 12), + + /* Time-out the read operation after this amount of seconds */ + CINIT(TIMEOUT, LONG, 13), + + /* If the CURLOPT_INFILE is used, this can be used to inform libcurl about + * how large the file being sent really is. That allows better error + * checking and better verifies that the upload was successful. -1 means + * unknown size. + * + * For large file support, there is also a _LARGE version of the key + * which takes an off_t type, allowing platforms with larger off_t + * sizes to handle larger files. See below for INFILESIZE_LARGE. + */ + CINIT(INFILESIZE, LONG, 14), + + /* POST static input fields. */ + CINIT(POSTFIELDS, OBJECTPOINT, 15), + + /* Set the referrer page (needed by some CGIs) */ + CINIT(REFERER, OBJECTPOINT, 16), + + /* Set the FTP PORT string (interface name, named or numerical IP address) + Use i.e '-' to use default address. */ + CINIT(FTPPORT, OBJECTPOINT, 17), + + /* Set the User-Agent string (examined by some CGIs) */ + CINIT(USERAGENT, OBJECTPOINT, 18), + + /* If the download receives less than "low speed limit" bytes/second + * during "low speed time" seconds, the operations is aborted. + * You could i.e if you have a pretty high speed connection, abort if + * it is less than 2000 bytes/sec during 20 seconds. + */ + + /* Set the "low speed limit" */ + CINIT(LOW_SPEED_LIMIT, LONG, 19), + + /* Set the "low speed time" */ + CINIT(LOW_SPEED_TIME, LONG, 20), + + /* Set the continuation offset. + * + * Note there is also a _LARGE version of this key which uses + * off_t types, allowing for large file offsets on platforms which + * use larger-than-32-bit off_t's. Look below for RESUME_FROM_LARGE. + */ + CINIT(RESUME_FROM, LONG, 21), + + /* Set cookie in request: */ + CINIT(COOKIE, OBJECTPOINT, 22), + + /* This points to a linked list of headers, struct curl_slist kind */ + CINIT(HTTPHEADER, OBJECTPOINT, 23), + + /* This points to a linked list of post entries, struct curl_httppost */ + CINIT(HTTPPOST, OBJECTPOINT, 24), + + /* name of the file keeping your private SSL-certificate */ + CINIT(SSLCERT, OBJECTPOINT, 25), + + /* password for the SSL or SSH private key */ + CINIT(KEYPASSWD, OBJECTPOINT, 26), + + /* send TYPE parameter? */ + CINIT(CRLF, LONG, 27), + + /* send linked-list of QUOTE commands */ + CINIT(QUOTE, OBJECTPOINT, 28), + + /* send FILE * or void * to store headers to, if you use a callback it + is simply passed to the callback unmodified */ + CINIT(WRITEHEADER, OBJECTPOINT, 29), + + /* point to a file to read the initial cookies from, also enables + "cookie awareness" */ + CINIT(COOKIEFILE, OBJECTPOINT, 31), + + /* What version to specifically try to use. + See CURL_SSLVERSION defines below. */ + CINIT(SSLVERSION, LONG, 32), + + /* What kind of HTTP time condition to use, see defines */ + CINIT(TIMECONDITION, LONG, 33), + + /* Time to use with the above condition. Specified in number of seconds + since 1 Jan 1970 */ + CINIT(TIMEVALUE, LONG, 34), + + /* 35 = OBSOLETE */ + + /* Custom request, for customizing the get command like + HTTP: DELETE, TRACE and others + FTP: to use a different list command + */ + CINIT(CUSTOMREQUEST, OBJECTPOINT, 36), + + /* HTTP request, for odd commands like DELETE, TRACE and others */ + CINIT(STDERR, OBJECTPOINT, 37), + + /* 38 is not used */ + + /* send linked-list of post-transfer QUOTE commands */ + CINIT(POSTQUOTE, OBJECTPOINT, 39), + + /* Pass a pointer to string of the output using full variable-replacement + as described elsewhere. */ + CINIT(WRITEINFO, OBJECTPOINT, 40), + + CINIT(VERBOSE, LONG, 41), /* talk a lot */ + CINIT(HEADER, LONG, 42), /* throw the header out too */ + CINIT(NOPROGRESS, LONG, 43), /* shut off the progress meter */ + CINIT(NOBODY, LONG, 44), /* use HEAD to get http document */ + CINIT(FAILONERROR, LONG, 45), /* no output on http error codes >= 300 */ + CINIT(UPLOAD, LONG, 46), /* this is an upload */ + CINIT(POST, LONG, 47), /* HTTP POST method */ + CINIT(DIRLISTONLY, LONG, 48), /* return bare names when listing directories */ + + CINIT(APPEND, LONG, 50), /* Append instead of overwrite on upload! */ + + /* Specify whether to read the user+password from the .netrc or the URL. + * This must be one of the CURL_NETRC_* enums below. */ + CINIT(NETRC, LONG, 51), + + CINIT(FOLLOWLOCATION, LONG, 52), /* use Location: Luke! */ + + CINIT(TRANSFERTEXT, LONG, 53), /* transfer data in text/ASCII format */ + CINIT(PUT, LONG, 54), /* HTTP PUT */ + + /* 55 = OBSOLETE */ + + /* Function that will be called instead of the internal progress display + * function. This function should be defined as the curl_progress_callback + * prototype defines. */ + CINIT(PROGRESSFUNCTION, FUNCTIONPOINT, 56), + + /* Data passed to the progress callback */ + CINIT(PROGRESSDATA, OBJECTPOINT, 57), + + /* We want the referrer field set automatically when following locations */ + CINIT(AUTOREFERER, LONG, 58), + + /* Port of the proxy, can be set in the proxy string as well with: + "[host]:[port]" */ + CINIT(PROXYPORT, LONG, 59), + + /* size of the POST input data, if strlen() is not good to use */ + CINIT(POSTFIELDSIZE, LONG, 60), + + /* tunnel non-http operations through a HTTP proxy */ + CINIT(HTTPPROXYTUNNEL, LONG, 61), + + /* Set the interface string to use as outgoing network interface */ + CINIT(INTERFACE, OBJECTPOINT, 62), + + /* Set the krb4/5 security level, this also enables krb4/5 awareness. This + * is a string, 'clear', 'safe', 'confidential' or 'private'. If the string + * is set but doesn't match one of these, 'private' will be used. */ + CINIT(KRBLEVEL, OBJECTPOINT, 63), + + /* Set if we should verify the peer in ssl handshake, set 1 to verify. */ + CINIT(SSL_VERIFYPEER, LONG, 64), + + /* The CApath or CAfile used to validate the peer certificate + this option is used only if SSL_VERIFYPEER is true */ + CINIT(CAINFO, OBJECTPOINT, 65), + + /* 66 = OBSOLETE */ + /* 67 = OBSOLETE */ + + /* Maximum number of http redirects to follow */ + CINIT(MAXREDIRS, LONG, 68), + + /* Pass a long set to 1 to get the date of the requested document (if + possible)! Pass a zero to shut it off. */ + CINIT(FILETIME, LONG, 69), + + /* This points to a linked list of telnet options */ + CINIT(TELNETOPTIONS, OBJECTPOINT, 70), + + /* Max amount of cached alive connections */ + CINIT(MAXCONNECTS, LONG, 71), + + /* What policy to use when closing connections when the cache is filled + up */ + CINIT(CLOSEPOLICY, LONG, 72), + + /* 73 = OBSOLETE */ + + /* Set to explicitly use a new connection for the upcoming transfer. + Do not use this unless you're absolutely sure of this, as it makes the + operation slower and is less friendly for the network. */ + CINIT(FRESH_CONNECT, LONG, 74), + + /* Set to explicitly forbid the upcoming transfer's connection to be re-used + when done. Do not use this unless you're absolutely sure of this, as it + makes the operation slower and is less friendly for the network. */ + CINIT(FORBID_REUSE, LONG, 75), + + /* Set to a file name that contains random data for libcurl to use to + seed the random engine when doing SSL connects. */ + CINIT(RANDOM_FILE, OBJECTPOINT, 76), + + /* Set to the Entropy Gathering Daemon socket pathname */ + CINIT(EGDSOCKET, OBJECTPOINT, 77), + + /* Time-out connect operations after this amount of seconds, if connects + are OK within this time, then fine... This only aborts the connect + phase. [Only works on unix-style/SIGALRM operating systems] */ + CINIT(CONNECTTIMEOUT, LONG, 78), + + /* Function that will be called to store headers (instead of fwrite). The + * parameters will use fwrite() syntax, make sure to follow them. */ + CINIT(HEADERFUNCTION, FUNCTIONPOINT, 79), + + /* Set this to force the HTTP request to get back to GET. Only really usable + if POST, PUT or a custom request have been used first. + */ + CINIT(HTTPGET, LONG, 80), + + /* Set if we should verify the Common name from the peer certificate in ssl + * handshake, set 1 to check existence, 2 to ensure that it matches the + * provided hostname. */ + CINIT(SSL_VERIFYHOST, LONG, 81), + + /* Specify which file name to write all known cookies in after completed + operation. Set file name to "-" (dash) to make it go to stdout. */ + CINIT(COOKIEJAR, OBJECTPOINT, 82), + + /* Specify which SSL ciphers to use */ + CINIT(SSL_CIPHER_LIST, OBJECTPOINT, 83), + + /* Specify which HTTP version to use! This must be set to one of the + CURL_HTTP_VERSION* enums set below. */ + CINIT(HTTP_VERSION, LONG, 84), + + /* Specifically switch on or off the FTP engine's use of the EPSV command. By + default, that one will always be attempted before the more traditional + PASV command. */ + CINIT(FTP_USE_EPSV, LONG, 85), + + /* type of the file keeping your SSL-certificate ("DER", "PEM", "ENG") */ + CINIT(SSLCERTTYPE, OBJECTPOINT, 86), + + /* name of the file keeping your private SSL-key */ + CINIT(SSLKEY, OBJECTPOINT, 87), + + /* type of the file keeping your private SSL-key ("DER", "PEM", "ENG") */ + CINIT(SSLKEYTYPE, OBJECTPOINT, 88), + + /* crypto engine for the SSL-sub system */ + CINIT(SSLENGINE, OBJECTPOINT, 89), + + /* set the crypto engine for the SSL-sub system as default + the param has no meaning... + */ + CINIT(SSLENGINE_DEFAULT, LONG, 90), + + /* Non-zero value means to use the global dns cache */ + CINIT(DNS_USE_GLOBAL_CACHE, LONG, 91), /* To become OBSOLETE soon */ + + /* DNS cache timeout */ + CINIT(DNS_CACHE_TIMEOUT, LONG, 92), + + /* send linked-list of pre-transfer QUOTE commands */ + CINIT(PREQUOTE, OBJECTPOINT, 93), + + /* set the debug function */ + CINIT(DEBUGFUNCTION, FUNCTIONPOINT, 94), + + /* set the data for the debug function */ + CINIT(DEBUGDATA, OBJECTPOINT, 95), + + /* mark this as start of a cookie session */ + CINIT(COOKIESESSION, LONG, 96), + + /* The CApath directory used to validate the peer certificate + this option is used only if SSL_VERIFYPEER is true */ + CINIT(CAPATH, OBJECTPOINT, 97), + + /* Instruct libcurl to use a smaller receive buffer */ + CINIT(BUFFERSIZE, LONG, 98), + + /* Instruct libcurl to not use any signal/alarm handlers, even when using + timeouts. This option is useful for multi-threaded applications. + See libcurl-the-guide for more background information. */ + CINIT(NOSIGNAL, LONG, 99), + + /* Provide a CURLShare for mutexing non-ts data */ + CINIT(SHARE, OBJECTPOINT, 100), + + /* indicates type of proxy. accepted values are CURLPROXY_HTTP (default), + CURLPROXY_SOCKS4, CURLPROXY_SOCKS4A and CURLPROXY_SOCKS5. */ + CINIT(PROXYTYPE, LONG, 101), + + /* Set the Accept-Encoding string. Use this to tell a server you would like + the response to be compressed. */ + CINIT(ENCODING, OBJECTPOINT, 102), + + /* Set pointer to private data */ + CINIT(PRIVATE, OBJECTPOINT, 103), + + /* Set aliases for HTTP 200 in the HTTP Response header */ + CINIT(HTTP200ALIASES, OBJECTPOINT, 104), + + /* Continue to send authentication (user+password) when following locations, + even when hostname changed. This can potentially send off the name + and password to whatever host the server decides. */ + CINIT(UNRESTRICTED_AUTH, LONG, 105), + + /* Specifically switch on or off the FTP engine's use of the EPRT command ( it + also disables the LPRT attempt). By default, those ones will always be + attempted before the good old traditional PORT command. */ + CINIT(FTP_USE_EPRT, LONG, 106), + + /* Set this to a bitmask value to enable the particular authentications + methods you like. Use this in combination with CURLOPT_USERPWD. + Note that setting multiple bits may cause extra network round-trips. */ + CINIT(HTTPAUTH, LONG, 107), + + /* Set the ssl context callback function, currently only for OpenSSL ssl_ctx + in second argument. The function must be matching the + curl_ssl_ctx_callback proto. */ + CINIT(SSL_CTX_FUNCTION, FUNCTIONPOINT, 108), + + /* Set the userdata for the ssl context callback function's third + argument */ + CINIT(SSL_CTX_DATA, OBJECTPOINT, 109), + + /* FTP Option that causes missing dirs to be created on the remote server. + In 7.19.4 we introduced the convenience enums for this option using the + CURLFTP_CREATE_DIR prefix. + */ + CINIT(FTP_CREATE_MISSING_DIRS, LONG, 110), + + /* Set this to a bitmask value to enable the particular authentications + methods you like. Use this in combination with CURLOPT_PROXYUSERPWD. + Note that setting multiple bits may cause extra network round-trips. */ + CINIT(PROXYAUTH, LONG, 111), + + /* FTP option that changes the timeout, in seconds, associated with + getting a response. This is different from transfer timeout time and + essentially places a demand on the FTP server to acknowledge commands + in a timely manner. */ + CINIT(FTP_RESPONSE_TIMEOUT, LONG, 112), + + /* Set this option to one of the CURL_IPRESOLVE_* defines (see below) to + tell libcurl to resolve names to those IP versions only. This only has + affect on systems with support for more than one, i.e IPv4 _and_ IPv6. */ + CINIT(IPRESOLVE, LONG, 113), + + /* Set this option to limit the size of a file that will be downloaded from + an HTTP or FTP server. + + Note there is also _LARGE version which adds large file support for + platforms which have larger off_t sizes. See MAXFILESIZE_LARGE below. */ + CINIT(MAXFILESIZE, LONG, 114), + + /* See the comment for INFILESIZE above, but in short, specifies + * the size of the file being uploaded. -1 means unknown. + */ + CINIT(INFILESIZE_LARGE, OFF_T, 115), + + /* Sets the continuation offset. There is also a LONG version of this; + * look above for RESUME_FROM. + */ + CINIT(RESUME_FROM_LARGE, OFF_T, 116), + + /* Sets the maximum size of data that will be downloaded from + * an HTTP or FTP server. See MAXFILESIZE above for the LONG version. + */ + CINIT(MAXFILESIZE_LARGE, OFF_T, 117), + + /* Set this option to the file name of your .netrc file you want libcurl + to parse (using the CURLOPT_NETRC option). If not set, libcurl will do + a poor attempt to find the user's home directory and check for a .netrc + file in there. */ + CINIT(NETRC_FILE, OBJECTPOINT, 118), + + /* Enable SSL/TLS for FTP, pick one of: + CURLFTPSSL_TRY - try using SSL, proceed anyway otherwise + CURLFTPSSL_CONTROL - SSL for the control connection or fail + CURLFTPSSL_ALL - SSL for all communication or fail + */ + CINIT(USE_SSL, LONG, 119), + + /* The _LARGE version of the standard POSTFIELDSIZE option */ + CINIT(POSTFIELDSIZE_LARGE, OFF_T, 120), + + /* Enable/disable the TCP Nagle algorithm */ + CINIT(TCP_NODELAY, LONG, 121), + + /* 122 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */ + /* 123 OBSOLETE. Gone in 7.16.0 */ + /* 124 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */ + /* 125 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */ + /* 126 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */ + /* 127 OBSOLETE. Gone in 7.16.0 */ + /* 128 OBSOLETE. Gone in 7.16.0 */ + + /* When FTP over SSL/TLS is selected (with CURLOPT_USE_SSL), this option + can be used to change libcurl's default action which is to first try + "AUTH SSL" and then "AUTH TLS" in this order, and proceed when a OK + response has been received. + + Available parameters are: + CURLFTPAUTH_DEFAULT - let libcurl decide + CURLFTPAUTH_SSL - try "AUTH SSL" first, then TLS + CURLFTPAUTH_TLS - try "AUTH TLS" first, then SSL + */ + CINIT(FTPSSLAUTH, LONG, 129), + + CINIT(IOCTLFUNCTION, FUNCTIONPOINT, 130), + CINIT(IOCTLDATA, OBJECTPOINT, 131), + + /* 132 OBSOLETE. Gone in 7.16.0 */ + /* 133 OBSOLETE. Gone in 7.16.0 */ + + /* zero terminated string for pass on to the FTP server when asked for + "account" info */ + CINIT(FTP_ACCOUNT, OBJECTPOINT, 134), + + /* feed cookies into cookie engine */ + CINIT(COOKIELIST, OBJECTPOINT, 135), + + /* ignore Content-Length */ + CINIT(IGNORE_CONTENT_LENGTH, LONG, 136), + + /* Set to non-zero to skip the IP address received in a 227 PASV FTP server + response. Typically used for FTP-SSL purposes but is not restricted to + that. libcurl will then instead use the same IP address it used for the + control connection. */ + CINIT(FTP_SKIP_PASV_IP, LONG, 137), + + /* Select "file method" to use when doing FTP, see the curl_ftpmethod + above. */ + CINIT(FTP_FILEMETHOD, LONG, 138), + + /* Local port number to bind the socket to */ + CINIT(LOCALPORT, LONG, 139), + + /* Number of ports to try, including the first one set with LOCALPORT. + Thus, setting it to 1 will make no additional attempts but the first. + */ + CINIT(LOCALPORTRANGE, LONG, 140), + + /* no transfer, set up connection and let application use the socket by + extracting it with CURLINFO_LASTSOCKET */ + CINIT(CONNECT_ONLY, LONG, 141), + + /* Function that will be called to convert from the + network encoding (instead of using the iconv calls in libcurl) */ + CINIT(CONV_FROM_NETWORK_FUNCTION, FUNCTIONPOINT, 142), + + /* Function that will be called to convert to the + network encoding (instead of using the iconv calls in libcurl) */ + CINIT(CONV_TO_NETWORK_FUNCTION, FUNCTIONPOINT, 143), + + /* Function that will be called to convert from UTF8 + (instead of using the iconv calls in libcurl) + Note that this is used only for SSL certificate processing */ + CINIT(CONV_FROM_UTF8_FUNCTION, FUNCTIONPOINT, 144), + + /* if the connection proceeds too quickly then need to slow it down */ + /* limit-rate: maximum number of bytes per second to send or receive */ + CINIT(MAX_SEND_SPEED_LARGE, OFF_T, 145), + CINIT(MAX_RECV_SPEED_LARGE, OFF_T, 146), + + /* Pointer to command string to send if USER/PASS fails. */ + CINIT(FTP_ALTERNATIVE_TO_USER, OBJECTPOINT, 147), + + /* callback function for setting socket options */ + CINIT(SOCKOPTFUNCTION, FUNCTIONPOINT, 148), + CINIT(SOCKOPTDATA, OBJECTPOINT, 149), + + /* set to 0 to disable session ID re-use for this transfer, default is + enabled (== 1) */ + CINIT(SSL_SESSIONID_CACHE, LONG, 150), + + /* allowed SSH authentication methods */ + CINIT(SSH_AUTH_TYPES, LONG, 151), + + /* Used by scp/sftp to do public/private key authentication */ + CINIT(SSH_PUBLIC_KEYFILE, OBJECTPOINT, 152), + CINIT(SSH_PRIVATE_KEYFILE, OBJECTPOINT, 153), + + /* Send CCC (Clear Command Channel) after authentication */ + CINIT(FTP_SSL_CCC, LONG, 154), + + /* Same as TIMEOUT and CONNECTTIMEOUT, but with ms resolution */ + CINIT(TIMEOUT_MS, LONG, 155), + CINIT(CONNECTTIMEOUT_MS, LONG, 156), + + /* set to zero to disable the libcurl's decoding and thus pass the raw body + data to the application even when it is encoded/compressed */ + CINIT(HTTP_TRANSFER_DECODING, LONG, 157), + CINIT(HTTP_CONTENT_DECODING, LONG, 158), + + /* Permission used when creating new files and directories on the remote + server for protocols that support it, SFTP/SCP/FILE */ + CINIT(NEW_FILE_PERMS, LONG, 159), + CINIT(NEW_DIRECTORY_PERMS, LONG, 160), + + /* Set the behaviour of POST when redirecting. Values must be set to one + of CURL_REDIR* defines below. This used to be called CURLOPT_POST301 */ + CINIT(POSTREDIR, LONG, 161), + + /* used by scp/sftp to verify the host's public key */ + CINIT(SSH_HOST_PUBLIC_KEY_MD5, OBJECTPOINT, 162), + + /* Callback function for opening socket (instead of socket(2)). Optionally, + callback is able change the address or refuse to connect returning + CURL_SOCKET_BAD. The callback should have type + curl_opensocket_callback */ + CINIT(OPENSOCKETFUNCTION, FUNCTIONPOINT, 163), + CINIT(OPENSOCKETDATA, OBJECTPOINT, 164), + + /* POST volatile input fields. */ + CINIT(COPYPOSTFIELDS, OBJECTPOINT, 165), + + /* set transfer mode (;type=<a|i>) when doing FTP via an HTTP proxy */ + CINIT(PROXY_TRANSFER_MODE, LONG, 166), + + /* Callback function for seeking in the input stream */ + CINIT(SEEKFUNCTION, FUNCTIONPOINT, 167), + CINIT(SEEKDATA, OBJECTPOINT, 168), + + /* CRL file */ + CINIT(CRLFILE, OBJECTPOINT, 169), + + /* Issuer certificate */ + CINIT(ISSUERCERT, OBJECTPOINT, 170), + + /* (IPv6) Address scope */ + CINIT(ADDRESS_SCOPE, LONG, 171), + + /* Collect certificate chain info and allow it to get retrievable with + CURLINFO_CERTINFO after the transfer is complete. (Unfortunately) only + working with OpenSSL-powered builds. */ + CINIT(CERTINFO, LONG, 172), + + /* "name" and "pwd" to use when fetching. */ + CINIT(USERNAME, OBJECTPOINT, 173), + CINIT(PASSWORD, OBJECTPOINT, 174), + + /* "name" and "pwd" to use with Proxy when fetching. */ + CINIT(PROXYUSERNAME, OBJECTPOINT, 175), + CINIT(PROXYPASSWORD, OBJECTPOINT, 176), + + /* Comma separated list of hostnames defining no-proxy zones. These should + match both hostnames directly, and hostnames within a domain. For + example, local.com will match local.com and www.local.com, but NOT + notlocal.com or www.notlocal.com. For compatibility with other + implementations of this, .local.com will be considered to be the same as + local.com. A single * is the only valid wildcard, and effectively + disables the use of proxy. */ + CINIT(NOPROXY, OBJECTPOINT, 177), + + /* block size for TFTP transfers */ + CINIT(TFTP_BLKSIZE, LONG, 178), + + /* Socks Service */ + CINIT(SOCKS5_GSSAPI_SERVICE, OBJECTPOINT, 179), + + /* Socks Service */ + CINIT(SOCKS5_GSSAPI_NEC, LONG, 180), + + /* set the bitmask for the protocols that are allowed to be used for the + transfer, which thus helps the app which takes URLs from users or other + external inputs and want to restrict what protocol(s) to deal + with. Defaults to CURLPROTO_ALL. */ + CINIT(PROTOCOLS, LONG, 181), + + /* set the bitmask for the protocols that libcurl is allowed to follow to, + as a subset of the CURLOPT_PROTOCOLS ones. That means the protocol needs + to be set in both bitmasks to be allowed to get redirected to. Defaults + to all protocols except FILE and SCP. */ + CINIT(REDIR_PROTOCOLS, LONG, 182), + + /* set the SSH knownhost file name to use */ + CINIT(SSH_KNOWNHOSTS, OBJECTPOINT, 183), + + /* set the SSH host key callback, must point to a curl_sshkeycallback + function */ + CINIT(SSH_KEYFUNCTION, FUNCTIONPOINT, 184), + + /* set the SSH host key callback custom pointer */ + CINIT(SSH_KEYDATA, OBJECTPOINT, 185), + + CURLOPT_LASTENTRY /* the last unused */ +} CURLoption; + +#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all + the obsolete stuff removed! */ + +/* Backwards compatibility with older names */ +/* These are scheduled to disappear by 2011 */ + +/* This was added in version 7.19.1 */ +#define CURLOPT_POST301 CURLOPT_POSTREDIR + +/* These are scheduled to disappear by 2009 */ + +/* The following were added in 7.17.0 */ +#define CURLOPT_SSLKEYPASSWD CURLOPT_KEYPASSWD +#define CURLOPT_FTPAPPEND CURLOPT_APPEND +#define CURLOPT_FTPLISTONLY CURLOPT_DIRLISTONLY +#define CURLOPT_FTP_SSL CURLOPT_USE_SSL + +/* The following were added earlier */ + +#define CURLOPT_SSLCERTPASSWD CURLOPT_KEYPASSWD +#define CURLOPT_KRB4LEVEL CURLOPT_KRBLEVEL + +#else +/* This is set if CURL_NO_OLDIES is defined at compile-time */ +#undef CURLOPT_DNS_USE_GLOBAL_CACHE /* soon obsolete */ +#endif + + + /* Below here follows defines for the CURLOPT_IPRESOLVE option. If a host + name resolves addresses using more than one IP protocol version, this + option might be handy to force libcurl to use a specific IP version. */ +#define CURL_IPRESOLVE_WHATEVER 0 /* default, resolves addresses to all IP + versions that your system allows */ +#define CURL_IPRESOLVE_V4 1 /* resolve to ipv4 addresses */ +#define CURL_IPRESOLVE_V6 2 /* resolve to ipv6 addresses */ + + /* three convenient "aliases" that follow the name scheme better */ +#define CURLOPT_WRITEDATA CURLOPT_FILE +#define CURLOPT_READDATA CURLOPT_INFILE +#define CURLOPT_HEADERDATA CURLOPT_WRITEHEADER + + /* These enums are for use with the CURLOPT_HTTP_VERSION option. */ +enum { + CURL_HTTP_VERSION_NONE, /* setting this means we don't care, and that we'd + like the library to choose the best possible + for us! */ + CURL_HTTP_VERSION_1_0, /* please use HTTP 1.0 in the request */ + CURL_HTTP_VERSION_1_1, /* please use HTTP 1.1 in the request */ + + CURL_HTTP_VERSION_LAST /* *ILLEGAL* http version */ +}; + + /* These enums are for use with the CURLOPT_NETRC option. */ +enum CURL_NETRC_OPTION { + CURL_NETRC_IGNORED, /* The .netrc will never be read. + * This is the default. */ + CURL_NETRC_OPTIONAL, /* A user:password in the URL will be preferred + * to one in the .netrc. */ + CURL_NETRC_REQUIRED, /* A user:password in the URL will be ignored. + * Unless one is set programmatically, the .netrc + * will be queried. */ + CURL_NETRC_LAST +}; + +enum { + CURL_SSLVERSION_DEFAULT, + CURL_SSLVERSION_TLSv1, + CURL_SSLVERSION_SSLv2, + CURL_SSLVERSION_SSLv3, + + CURL_SSLVERSION_LAST /* never use, keep last */ +}; + +/* symbols to use with CURLOPT_POSTREDIR. + CURL_REDIR_POST_301 and CURL_REDIR_POST_302 can be bitwise ORed so that + CURL_REDIR_POST_301 | CURL_REDIR_POST_302 == CURL_REDIR_POST_ALL */ + +#define CURL_REDIR_GET_ALL 0 +#define CURL_REDIR_POST_301 1 +#define CURL_REDIR_POST_302 2 +#define CURL_REDIR_POST_ALL (CURL_REDIR_POST_301|CURL_REDIR_POST_302) + +typedef enum { + CURL_TIMECOND_NONE, + + CURL_TIMECOND_IFMODSINCE, + CURL_TIMECOND_IFUNMODSINCE, + CURL_TIMECOND_LASTMOD, + + CURL_TIMECOND_LAST +} curl_TimeCond; + + +/* curl_strequal() and curl_strnequal() are subject for removal in a future + libcurl, see lib/README.curlx for details */ +CURL_EXTERN int (curl_strequal)(const char *s1, const char *s2); +CURL_EXTERN int (curl_strnequal)(const char *s1, const char *s2, size_t n); + +/* name is uppercase CURLFORM_<name> */ +#ifdef CFINIT +#undef CFINIT +#endif + +#ifdef CURL_ISOCPP +#define CFINIT(name) CURLFORM_ ## name +#else +/* The macro "##" is ISO C, we assume pre-ISO C doesn't support it. */ +#define CFINIT(name) CURLFORM_/**/name +#endif + +typedef enum { + CFINIT(NOTHING), /********* the first one is unused ************/ + + /* */ + CFINIT(COPYNAME), + CFINIT(PTRNAME), + CFINIT(NAMELENGTH), + CFINIT(COPYCONTENTS), + CFINIT(PTRCONTENTS), + CFINIT(CONTENTSLENGTH), + CFINIT(FILECONTENT), + CFINIT(ARRAY), + CFINIT(OBSOLETE), + CFINIT(FILE), + + CFINIT(BUFFER), + CFINIT(BUFFERPTR), + CFINIT(BUFFERLENGTH), + + CFINIT(CONTENTTYPE), + CFINIT(CONTENTHEADER), + CFINIT(FILENAME), + CFINIT(END), + CFINIT(OBSOLETE2), + + CFINIT(STREAM), + + CURLFORM_LASTENTRY /* the last unused */ +} CURLformoption; + +#undef CFINIT /* done */ + +/* structure to be used as parameter for CURLFORM_ARRAY */ +struct curl_forms { + CURLformoption option; + const char *value; +}; + +/* use this for multipart formpost building */ +/* Returns code for curl_formadd() + * + * Returns: + * CURL_FORMADD_OK on success + * CURL_FORMADD_MEMORY if the FormInfo allocation fails + * CURL_FORMADD_OPTION_TWICE if one option is given twice for one Form + * CURL_FORMADD_NULL if a null pointer was given for a char + * CURL_FORMADD_MEMORY if the allocation of a FormInfo struct failed + * CURL_FORMADD_UNKNOWN_OPTION if an unknown option was used + * CURL_FORMADD_INCOMPLETE if the some FormInfo is not complete (or error) + * CURL_FORMADD_MEMORY if a curl_httppost struct cannot be allocated + * CURL_FORMADD_MEMORY if some allocation for string copying failed. + * CURL_FORMADD_ILLEGAL_ARRAY if an illegal option is used in an array + * + ***************************************************************************/ +typedef enum { + CURL_FORMADD_OK, /* first, no error */ + + CURL_FORMADD_MEMORY, + CURL_FORMADD_OPTION_TWICE, + CURL_FORMADD_NULL, + CURL_FORMADD_UNKNOWN_OPTION, + CURL_FORMADD_INCOMPLETE, + CURL_FORMADD_ILLEGAL_ARRAY, + CURL_FORMADD_DISABLED, /* libcurl was built with this disabled */ + + CURL_FORMADD_LAST /* last */ +} CURLFORMcode; + +/* + * NAME curl_formadd() + * + * DESCRIPTION + * + * Pretty advanced function for building multi-part formposts. Each invoke + * adds one part that together construct a full post. Then use + * CURLOPT_HTTPPOST to send it off to libcurl. + */ +CURL_EXTERN CURLFORMcode curl_formadd(struct curl_httppost **httppost, + struct curl_httppost **last_post, + ...); + +/* + * callback function for curl_formget() + * The void *arg pointer will be the one passed as second argument to + * curl_formget(). + * The character buffer passed to it must not be freed. + * Should return the buffer length passed to it as the argument "len" on + * success. + */ +typedef size_t (*curl_formget_callback)(void *arg, const char *buf, size_t len); + +/* + * NAME curl_formget() + * + * DESCRIPTION + * + * Serialize a curl_httppost struct built with curl_formadd(). + * Accepts a void pointer as second argument which will be passed to + * the curl_formget_callback function. + * Returns 0 on success. + */ +CURL_EXTERN int curl_formget(struct curl_httppost *form, void *arg, + curl_formget_callback append); +/* + * NAME curl_formfree() + * + * DESCRIPTION + * + * Free a multipart formpost previously built with curl_formadd(). + */ +CURL_EXTERN void curl_formfree(struct curl_httppost *form); + +/* + * NAME curl_getenv() + * + * DESCRIPTION + * + * Returns a malloc()'ed string that MUST be curl_free()ed after usage is + * complete. DEPRECATED - see lib/README.curlx + */ +CURL_EXTERN char *curl_getenv(const char *variable); + +/* + * NAME curl_version() + * + * DESCRIPTION + * + * Returns a static ascii string of the libcurl version. + */ +CURL_EXTERN char *curl_version(void); + +/* + * NAME curl_easy_escape() + * + * DESCRIPTION + * + * Escapes URL strings (converts all letters consider illegal in URLs to their + * %XX versions). This function returns a new allocated string or NULL if an + * error occurred. + */ +CURL_EXTERN char *curl_easy_escape(CURL *handle, + const char *string, + int length); + +/* the previous version: */ +CURL_EXTERN char *curl_escape(const char *string, + int length); + + +/* + * NAME curl_easy_unescape() + * + * DESCRIPTION + * + * Unescapes URL encoding in strings (converts all %XX codes to their 8bit + * versions). This function returns a new allocated string or NULL if an error + * occurred. + * Conversion Note: On non-ASCII platforms the ASCII %XX codes are + * converted into the host encoding. + */ +CURL_EXTERN char *curl_easy_unescape(CURL *handle, + const char *string, + int length, + int *outlength); + +/* the previous version */ +CURL_EXTERN char *curl_unescape(const char *string, + int length); + +/* + * NAME curl_free() + * + * DESCRIPTION + * + * Provided for de-allocation in the same translation unit that did the + * allocation. Added in libcurl 7.10 + */ +CURL_EXTERN void curl_free(void *p); + +/* + * NAME curl_global_init() + * + * DESCRIPTION + * + * curl_global_init() should be invoked exactly once for each application that + * uses libcurl and before any call of other libcurl functions. + * + * This function is not thread-safe! + */ +CURL_EXTERN CURLcode curl_global_init(long flags); + +/* + * NAME curl_global_init_mem() + * + * DESCRIPTION + * + * curl_global_init() or curl_global_init_mem() should be invoked exactly once + * for each application that uses libcurl. This function can be used to + * initialize libcurl and set user defined memory management callback + * functions. Users can implement memory management routines to check for + * memory leaks, check for mis-use of the curl library etc. User registered + * callback routines with be invoked by this library instead of the system + * memory management routines like malloc, free etc. + */ +CURL_EXTERN CURLcode curl_global_init_mem(long flags, + curl_malloc_callback m, + curl_free_callback f, + curl_realloc_callback r, + curl_strdup_callback s, + curl_calloc_callback c); + +/* + * NAME curl_global_cleanup() + * + * DESCRIPTION + * + * curl_global_cleanup() should be invoked exactly once for each application + * that uses libcurl + */ +CURL_EXTERN void curl_global_cleanup(void); + +/* linked-list structure for the CURLOPT_QUOTE option (and other) */ +struct curl_slist { + char *data; + struct curl_slist *next; +}; + +/* + * NAME curl_slist_append() + * + * DESCRIPTION + * + * Appends a string to a linked list. If no list exists, it will be created + * first. Returns the new list, after appending. + */ +CURL_EXTERN struct curl_slist *curl_slist_append(struct curl_slist *, + const char *); + +/* + * NAME curl_slist_free_all() + * + * DESCRIPTION + * + * free a previously built curl_slist. + */ +CURL_EXTERN void curl_slist_free_all(struct curl_slist *); + +/* + * NAME curl_getdate() + * + * DESCRIPTION + * + * Returns the time, in seconds since 1 Jan 1970 of the time string given in + * the first argument. The time argument in the second parameter is unused + * and should be set to NULL. + */ +CURL_EXTERN time_t curl_getdate(const char *p, const time_t *unused); + +/* info about the certificate chain, only for OpenSSL builds. Asked + for with CURLOPT_CERTINFO / CURLINFO_CERTINFO */ +struct curl_certinfo { + int num_of_certs; /* number of certificates with information */ + struct curl_slist **certinfo; /* for each index in this array, there's a + linked list with textual information in the + format "name: value" */ +}; + +#define CURLINFO_STRING 0x100000 +#define CURLINFO_LONG 0x200000 +#define CURLINFO_DOUBLE 0x300000 +#define CURLINFO_SLIST 0x400000 +#define CURLINFO_MASK 0x0fffff +#define CURLINFO_TYPEMASK 0xf00000 + +typedef enum { + CURLINFO_NONE, /* first, never use this */ + CURLINFO_EFFECTIVE_URL = CURLINFO_STRING + 1, + CURLINFO_RESPONSE_CODE = CURLINFO_LONG + 2, + CURLINFO_TOTAL_TIME = CURLINFO_DOUBLE + 3, + CURLINFO_NAMELOOKUP_TIME = CURLINFO_DOUBLE + 4, + CURLINFO_CONNECT_TIME = CURLINFO_DOUBLE + 5, + CURLINFO_PRETRANSFER_TIME = CURLINFO_DOUBLE + 6, + CURLINFO_SIZE_UPLOAD = CURLINFO_DOUBLE + 7, + CURLINFO_SIZE_DOWNLOAD = CURLINFO_DOUBLE + 8, + CURLINFO_SPEED_DOWNLOAD = CURLINFO_DOUBLE + 9, + CURLINFO_SPEED_UPLOAD = CURLINFO_DOUBLE + 10, + CURLINFO_HEADER_SIZE = CURLINFO_LONG + 11, + CURLINFO_REQUEST_SIZE = CURLINFO_LONG + 12, + CURLINFO_SSL_VERIFYRESULT = CURLINFO_LONG + 13, + CURLINFO_FILETIME = CURLINFO_LONG + 14, + CURLINFO_CONTENT_LENGTH_DOWNLOAD = CURLINFO_DOUBLE + 15, + CURLINFO_CONTENT_LENGTH_UPLOAD = CURLINFO_DOUBLE + 16, + CURLINFO_STARTTRANSFER_TIME = CURLINFO_DOUBLE + 17, + CURLINFO_CONTENT_TYPE = CURLINFO_STRING + 18, + CURLINFO_REDIRECT_TIME = CURLINFO_DOUBLE + 19, + CURLINFO_REDIRECT_COUNT = CURLINFO_LONG + 20, + CURLINFO_PRIVATE = CURLINFO_STRING + 21, + CURLINFO_HTTP_CONNECTCODE = CURLINFO_LONG + 22, + CURLINFO_HTTPAUTH_AVAIL = CURLINFO_LONG + 23, + CURLINFO_PROXYAUTH_AVAIL = CURLINFO_LONG + 24, + CURLINFO_OS_ERRNO = CURLINFO_LONG + 25, + CURLINFO_NUM_CONNECTS = CURLINFO_LONG + 26, + CURLINFO_SSL_ENGINES = CURLINFO_SLIST + 27, + CURLINFO_COOKIELIST = CURLINFO_SLIST + 28, + CURLINFO_LASTSOCKET = CURLINFO_LONG + 29, + CURLINFO_FTP_ENTRY_PATH = CURLINFO_STRING + 30, + CURLINFO_REDIRECT_URL = CURLINFO_STRING + 31, + CURLINFO_PRIMARY_IP = CURLINFO_STRING + 32, + CURLINFO_APPCONNECT_TIME = CURLINFO_DOUBLE + 33, + CURLINFO_CERTINFO = CURLINFO_SLIST + 34, + CURLINFO_CONDITION_UNMET = CURLINFO_LONG + 35, + /* Fill in new entries below here! */ + + CURLINFO_LASTONE = 35 +} CURLINFO; + +/* CURLINFO_RESPONSE_CODE is the new name for the option previously known as + CURLINFO_HTTP_CODE */ +#define CURLINFO_HTTP_CODE CURLINFO_RESPONSE_CODE + +typedef enum { + CURLCLOSEPOLICY_NONE, /* first, never use this */ + + CURLCLOSEPOLICY_OLDEST, + CURLCLOSEPOLICY_LEAST_RECENTLY_USED, + CURLCLOSEPOLICY_LEAST_TRAFFIC, + CURLCLOSEPOLICY_SLOWEST, + CURLCLOSEPOLICY_CALLBACK, + + CURLCLOSEPOLICY_LAST /* last, never use this */ +} curl_closepolicy; + +#define CURL_GLOBAL_SSL (1<<0) +#define CURL_GLOBAL_WIN32 (1<<1) +#define CURL_GLOBAL_ALL (CURL_GLOBAL_SSL|CURL_GLOBAL_WIN32) +#define CURL_GLOBAL_NOTHING 0 +#define CURL_GLOBAL_DEFAULT CURL_GLOBAL_ALL + + +/***************************************************************************** + * Setup defines, protos etc for the sharing stuff. + */ + +/* Different data locks for a single share */ +typedef enum { + CURL_LOCK_DATA_NONE = 0, + /* CURL_LOCK_DATA_SHARE is used internally to say that + * the locking is just made to change the internal state of the share + * itself. + */ + CURL_LOCK_DATA_SHARE, + CURL_LOCK_DATA_COOKIE, + CURL_LOCK_DATA_DNS, + CURL_LOCK_DATA_SSL_SESSION, + CURL_LOCK_DATA_CONNECT, + CURL_LOCK_DATA_LAST +} curl_lock_data; + +/* Different lock access types */ +typedef enum { + CURL_LOCK_ACCESS_NONE = 0, /* unspecified action */ + CURL_LOCK_ACCESS_SHARED = 1, /* for read perhaps */ + CURL_LOCK_ACCESS_SINGLE = 2, /* for write perhaps */ + CURL_LOCK_ACCESS_LAST /* never use */ +} curl_lock_access; + +typedef void (*curl_lock_function)(CURL *handle, + curl_lock_data data, + curl_lock_access locktype, + void *userptr); +typedef void (*curl_unlock_function)(CURL *handle, + curl_lock_data data, + void *userptr); + +typedef void CURLSH; + +typedef enum { + CURLSHE_OK, /* all is fine */ + CURLSHE_BAD_OPTION, /* 1 */ + CURLSHE_IN_USE, /* 2 */ + CURLSHE_INVALID, /* 3 */ + CURLSHE_NOMEM, /* out of memory */ + CURLSHE_LAST /* never use */ +} CURLSHcode; + +typedef enum { + CURLSHOPT_NONE, /* don't use */ + CURLSHOPT_SHARE, /* specify a data type to share */ + CURLSHOPT_UNSHARE, /* specify which data type to stop sharing */ + CURLSHOPT_LOCKFUNC, /* pass in a 'curl_lock_function' pointer */ + CURLSHOPT_UNLOCKFUNC, /* pass in a 'curl_unlock_function' pointer */ + CURLSHOPT_USERDATA, /* pass in a user data pointer used in the lock/unlock + callback functions */ + CURLSHOPT_LAST /* never use */ +} CURLSHoption; + +CURL_EXTERN CURLSH *curl_share_init(void); +CURL_EXTERN CURLSHcode curl_share_setopt(CURLSH *, CURLSHoption option, ...); +CURL_EXTERN CURLSHcode curl_share_cleanup(CURLSH *); + +/**************************************************************************** + * Structures for querying information about the curl library at runtime. + */ + +typedef enum { + CURLVERSION_FIRST, + CURLVERSION_SECOND, + CURLVERSION_THIRD, + CURLVERSION_FOURTH, + CURLVERSION_LAST /* never actually use this */ +} CURLversion; + +/* The 'CURLVERSION_NOW' is the symbolic name meant to be used by + basically all programs ever that want to get version information. It is + meant to be a built-in version number for what kind of struct the caller + expects. If the struct ever changes, we redefine the NOW to another enum + from above. */ +#define CURLVERSION_NOW CURLVERSION_FOURTH + +typedef struct { + CURLversion age; /* age of the returned struct */ + const char *version; /* LIBCURL_VERSION */ + unsigned int version_num; /* LIBCURL_VERSION_NUM */ + const char *host; /* OS/host/cpu/machine when configured */ + int features; /* bitmask, see defines below */ + const char *ssl_version; /* human readable string */ + long ssl_version_num; /* not used anymore, always 0 */ + const char *libz_version; /* human readable string */ + /* protocols is terminated by an entry with a NULL protoname */ + const char * const *protocols; + + /* The fields below this were added in CURLVERSION_SECOND */ + const char *ares; + int ares_num; + + /* This field was added in CURLVERSION_THIRD */ + const char *libidn; + + /* These field were added in CURLVERSION_FOURTH */ + + /* Same as '_libiconv_version' if built with HAVE_ICONV */ + int iconv_ver_num; + + const char *libssh_version; /* human readable string */ + +} curl_version_info_data; + +#define CURL_VERSION_IPV6 (1<<0) /* IPv6-enabled */ +#define CURL_VERSION_KERBEROS4 (1<<1) /* kerberos auth is supported */ +#define CURL_VERSION_SSL (1<<2) /* SSL options are present */ +#define CURL_VERSION_LIBZ (1<<3) /* libz features are present */ +#define CURL_VERSION_NTLM (1<<4) /* NTLM auth is supported */ +#define CURL_VERSION_GSSNEGOTIATE (1<<5) /* Negotiate auth support */ +#define CURL_VERSION_DEBUG (1<<6) /* built with debug capabilities */ +#define CURL_VERSION_ASYNCHDNS (1<<7) /* asynchronous dns resolves */ +#define CURL_VERSION_SPNEGO (1<<8) /* SPNEGO auth */ +#define CURL_VERSION_LARGEFILE (1<<9) /* supports files bigger than 2GB */ +#define CURL_VERSION_IDN (1<<10) /* International Domain Names support */ +#define CURL_VERSION_SSPI (1<<11) /* SSPI is supported */ +#define CURL_VERSION_CONV (1<<12) /* character conversions supported */ +#define CURL_VERSION_CURLDEBUG (1<<13) /* debug memory tracking supported */ + +/* + * NAME curl_version_info() + * + * DESCRIPTION + * + * This function returns a pointer to a static copy of the version info + * struct. See above. + */ +CURL_EXTERN curl_version_info_data *curl_version_info(CURLversion); + +/* + * NAME curl_easy_strerror() + * + * DESCRIPTION + * + * The curl_easy_strerror function may be used to turn a CURLcode value + * into the equivalent human readable error string. This is useful + * for printing meaningful error messages. + */ +CURL_EXTERN const char *curl_easy_strerror(CURLcode); + +/* + * NAME curl_share_strerror() + * + * DESCRIPTION + * + * The curl_share_strerror function may be used to turn a CURLSHcode value + * into the equivalent human readable error string. This is useful + * for printing meaningful error messages. + */ +CURL_EXTERN const char *curl_share_strerror(CURLSHcode); + +/* + * NAME curl_easy_pause() + * + * DESCRIPTION + * + * The curl_easy_pause function pauses or unpauses transfers. Select the new + * state by setting the bitmask, use the convenience defines below. + * + */ +CURL_EXTERN CURLcode curl_easy_pause(CURL *handle, int bitmask); + +#define CURLPAUSE_RECV (1<<0) +#define CURLPAUSE_RECV_CONT (0) + +#define CURLPAUSE_SEND (1<<2) +#define CURLPAUSE_SEND_CONT (0) + +#define CURLPAUSE_ALL (CURLPAUSE_RECV|CURLPAUSE_SEND) +#define CURLPAUSE_CONT (CURLPAUSE_RECV_CONT|CURLPAUSE_SEND_CONT) + +#ifdef __cplusplus +} +#endif + +/* unfortunately, the easy.h and multi.h include files need options and info + stuff before they can be included! */ +#include "easy.h" /* nothing in curl is fun without the easy stuff */ +#include "multi.h" + +/* the typechecker doesn't work in C++ (yet) */ +#if defined(__GNUC__) && defined(__GNUC_MINOR__) && \ + ((__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 3)) && \ + !defined(__cplusplus) && !defined(CURL_DISABLE_TYPECHECK) +#include "typecheck-gcc.h" +#else +#if defined(__STDC__) && (__STDC__ >= 1) +/* This preprocessor magic that replaces a call with the exact same call is + only done to make sure application authors pass exactly three arguments + to these functions. */ +#define curl_easy_setopt(handle,opt,param) curl_easy_setopt(handle,opt,param) +#define curl_easy_getinfo(handle,info,arg) curl_easy_getinfo(handle,info,arg) +#define curl_share_setopt(share,opt,param) curl_share_setopt(share,opt,param) +#define curl_multi_setopt(handle,opt,param) curl_multi_setopt(handle,opt,param) +#endif /* __STDC__ >= 1 */ +#endif /* gcc >= 4.3 && !__cplusplus */ + +#endif /* __CURL_CURL_H */ |