diff options
Diffstat (limited to 'plugins/FTPFileYM/curl/lib/gtls.c')
| -rw-r--r-- | plugins/FTPFileYM/curl/lib/gtls.c | 1119 |
1 files changed, 1119 insertions, 0 deletions
diff --git a/plugins/FTPFileYM/curl/lib/gtls.c b/plugins/FTPFileYM/curl/lib/gtls.c new file mode 100644 index 0000000000..700e46a9da --- /dev/null +++ b/plugins/FTPFileYM/curl/lib/gtls.c @@ -0,0 +1,1119 @@ +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at http://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ + +/* + * Source file for all GnuTLS-specific code for the TLS/SSL layer. No code + * but sslgen.c should ever call or use these functions. + * + * Note: don't use the GnuTLS' *_t variable type names in this source code, + * since they were not present in 1.0.X. + */ + +#include "curl_setup.h" + +#ifdef USE_GNUTLS + +#include <gnutls/gnutls.h> +#include <gnutls/x509.h> + +#ifdef USE_GNUTLS_NETTLE +#include <gnutls/crypto.h> +#include <nettle/md5.h> +#else +#include <gcrypt.h> +#endif + +#include "urldata.h" +#include "sendf.h" +#include "inet_pton.h" +#include "gtls.h" +#include "sslgen.h" +#include "parsedate.h" +#include "connect.h" /* for the connect timeout */ +#include "select.h" +#include "rawstr.h" + +#define _MPRINTF_REPLACE /* use our functions only */ +#include <curl/mprintf.h> +#include "curl_memory.h" +/* The last #include file should be: */ +#include "memdebug.h" + +/* + Some hackish cast macros based on: + http://library.gnome.org/devel/glib/unstable/glib-Type-Conversion-Macros.html +*/ +#ifndef GNUTLS_POINTER_TO_INT_CAST +#define GNUTLS_POINTER_TO_INT_CAST(p) ((int) (long) (p)) +#endif +#ifndef GNUTLS_INT_TO_POINTER_CAST +#define GNUTLS_INT_TO_POINTER_CAST(i) ((void*) (long) (i)) +#endif + +/* Enable GnuTLS debugging by defining GTLSDEBUG */ +/*#define GTLSDEBUG */ + +#ifdef GTLSDEBUG +static void tls_log_func(int level, const char *str) +{ + fprintf(stderr, "|<%d>| %s", level, str); +} +#endif +static bool gtls_inited = FALSE; + +#if defined(GNUTLS_VERSION_NUMBER) +# if (GNUTLS_VERSION_NUMBER >= 0x020c00) +# undef gnutls_transport_set_lowat +# define gnutls_transport_set_lowat(A,B) Curl_nop_stmt +# define USE_GNUTLS_PRIORITY_SET_DIRECT 1 +# endif +# if (GNUTLS_VERSION_NUMBER >= 0x020c03) +# define GNUTLS_MAPS_WINSOCK_ERRORS 1 +# endif +#endif + +/* + * Custom push and pull callback functions used by GNU TLS to read and write + * to the socket. These functions are simple wrappers to send() and recv() + * (although here using the sread/swrite macros as defined by + * curl_setup_once.h). + * We use custom functions rather than the GNU TLS defaults because it allows + * us to get specific about the fourth "flags" argument, and to use arbitrary + * private data with gnutls_transport_set_ptr if we wish. + * + * When these custom push and pull callbacks fail, GNU TLS checks its own + * session-specific error variable, and when not set also its own global + * errno variable, in order to take appropriate action. GNU TLS does not + * require that the transport is actually a socket. This implies that for + * Windows builds these callbacks should ideally set the session-specific + * error variable using function gnutls_transport_set_errno or as a last + * resort global errno variable using gnutls_transport_set_global_errno, + * with a transport agnostic error value. This implies that some winsock + * error translation must take place in these callbacks. + * + * Paragraph above applies to GNU TLS versions older than 2.12.3, since + * this version GNU TLS does its own internal winsock error translation + * using system_errno() function. + */ + +#if defined(USE_WINSOCK) && !defined(GNUTLS_MAPS_WINSOCK_ERRORS) +# define gtls_EINTR 4 +# define gtls_EIO 5 +# define gtls_EAGAIN 11 +static int gtls_mapped_sockerrno(void) +{ + switch(SOCKERRNO) { + case WSAEWOULDBLOCK: + return gtls_EAGAIN; + case WSAEINTR: + return gtls_EINTR; + default: + break; + } + return gtls_EIO; +} +#endif + +static ssize_t Curl_gtls_push(void *s, const void *buf, size_t len) +{ + ssize_t ret = swrite(GNUTLS_POINTER_TO_INT_CAST(s), buf, len); +#if defined(USE_WINSOCK) && !defined(GNUTLS_MAPS_WINSOCK_ERRORS) + if(ret < 0) + gnutls_transport_set_global_errno(gtls_mapped_sockerrno()); +#endif + return ret; +} + +static ssize_t Curl_gtls_pull(void *s, void *buf, size_t len) +{ + ssize_t ret = sread(GNUTLS_POINTER_TO_INT_CAST(s), buf, len); +#if defined(USE_WINSOCK) && !defined(GNUTLS_MAPS_WINSOCK_ERRORS) + if(ret < 0) + gnutls_transport_set_global_errno(gtls_mapped_sockerrno()); +#endif + return ret; +} + +/* Curl_gtls_init() + * + * Global GnuTLS init, called from Curl_ssl_init(). This calls functions that + * are not thread-safe and thus this function itself is not thread-safe and + * must only be called from within curl_global_init() to keep the thread + * situation under control! + */ +int Curl_gtls_init(void) +{ + int ret = 1; + if(!gtls_inited) { + ret = gnutls_global_init()?0:1; +#ifdef GTLSDEBUG + gnutls_global_set_log_function(tls_log_func); + gnutls_global_set_log_level(2); +#endif + gtls_inited = TRUE; + } + return ret; +} + +int Curl_gtls_cleanup(void) +{ + if(gtls_inited) { + gnutls_global_deinit(); + gtls_inited = FALSE; + } + return 1; +} + +static void showtime(struct SessionHandle *data, + const char *text, + time_t stamp) +{ + struct tm buffer; + const struct tm *tm = &buffer; + CURLcode result = Curl_gmtime(stamp, &buffer); + if(result) + return; + + snprintf(data->state.buffer, + BUFSIZE, + "\t %s: %s, %02d %s %4d %02d:%02d:%02d GMT\n", + text, + Curl_wkday[tm->tm_wday?tm->tm_wday-1:6], + tm->tm_mday, + Curl_month[tm->tm_mon], + tm->tm_year + 1900, + tm->tm_hour, + tm->tm_min, + tm->tm_sec); + infof(data, "%s\n", data->state.buffer); +} + +static gnutls_datum load_file (const char *file) +{ + FILE *f; + gnutls_datum loaded_file = { NULL, 0 }; + long filelen; + void *ptr; + + if(!(f = fopen(file, "r"))) + return loaded_file; + if(fseek(f, 0, SEEK_END) != 0 + || (filelen = ftell(f)) < 0 + || fseek(f, 0, SEEK_SET) != 0 + || !(ptr = malloc((size_t)filelen))) + goto out; + if(fread(ptr, 1, (size_t)filelen, f) < (size_t)filelen) { + free(ptr); + goto out; + } + + loaded_file.data = ptr; + loaded_file.size = (unsigned int)filelen; +out: + fclose(f); + return loaded_file; +} + +static void unload_file(gnutls_datum data) { + free(data.data); +} + + +/* this function does a SSL/TLS (re-)handshake */ +static CURLcode handshake(struct connectdata *conn, + int sockindex, + bool duringconnect, + bool nonblocking) +{ + struct SessionHandle *data = conn->data; + struct ssl_connect_data *connssl = &conn->ssl[sockindex]; + gnutls_session session = conn->ssl[sockindex].session; + curl_socket_t sockfd = conn->sock[sockindex]; + long timeout_ms; + int rc; + int what; + + for(;;) { + /* check allowed time left */ + timeout_ms = Curl_timeleft(data, NULL, duringconnect); + + if(timeout_ms < 0) { + /* no need to continue if time already is up */ + failf(data, "SSL connection timeout"); + return CURLE_OPERATION_TIMEDOUT; + } + + /* if ssl is expecting something, check if it's available. */ + if(connssl->connecting_state == ssl_connect_2_reading + || connssl->connecting_state == ssl_connect_2_writing) { + + curl_socket_t writefd = ssl_connect_2_writing== + connssl->connecting_state?sockfd:CURL_SOCKET_BAD; + curl_socket_t readfd = ssl_connect_2_reading== + connssl->connecting_state?sockfd:CURL_SOCKET_BAD; + + what = Curl_socket_ready(readfd, writefd, + nonblocking?0: + timeout_ms?timeout_ms:1000); + if(what < 0) { + /* fatal error */ + failf(data, "select/poll on SSL socket, errno: %d", SOCKERRNO); + return CURLE_SSL_CONNECT_ERROR; + } + else if(0 == what) { + if(nonblocking) + return CURLE_OK; + else if(timeout_ms) { + /* timeout */ + failf(data, "SSL connection timeout at %ld", timeout_ms); + return CURLE_OPERATION_TIMEDOUT; + } + } + /* socket is readable or writable */ + } + + rc = gnutls_handshake(session); + + if((rc == GNUTLS_E_AGAIN) || (rc == GNUTLS_E_INTERRUPTED)) { + connssl->connecting_state = + gnutls_record_get_direction(session)? + ssl_connect_2_writing:ssl_connect_2_reading; + continue; + if(nonblocking) + return CURLE_OK; + } + else if((rc < 0) && !gnutls_error_is_fatal(rc)) { + const char *strerr = NULL; + + if(rc == GNUTLS_E_WARNING_ALERT_RECEIVED) { + int alert = gnutls_alert_get(session); + strerr = gnutls_alert_get_name(alert); + } + + if(strerr == NULL) + strerr = gnutls_strerror(rc); + + failf(data, "gnutls_handshake() warning: %s", strerr); + } + else if(rc < 0) { + const char *strerr = NULL; + + if(rc == GNUTLS_E_FATAL_ALERT_RECEIVED) { + int alert = gnutls_alert_get(session); + strerr = gnutls_alert_get_name(alert); + } + + if(strerr == NULL) + strerr = gnutls_strerror(rc); + + failf(data, "gnutls_handshake() failed: %s", strerr); + return CURLE_SSL_CONNECT_ERROR; + } + + /* Reset our connect state machine */ + connssl->connecting_state = ssl_connect_1; + return CURLE_OK; + } +} + +static gnutls_x509_crt_fmt do_file_type(const char *type) +{ + if(!type || !type[0]) + return GNUTLS_X509_FMT_PEM; + if(Curl_raw_equal(type, "PEM")) + return GNUTLS_X509_FMT_PEM; + if(Curl_raw_equal(type, "DER")) + return GNUTLS_X509_FMT_DER; + return -1; +} + +static CURLcode +gtls_connect_step1(struct connectdata *conn, + int sockindex) +{ +#ifndef USE_GNUTLS_PRIORITY_SET_DIRECT + static const int cert_type_priority[] = { GNUTLS_CRT_X509, 0 }; +#endif + struct SessionHandle *data = conn->data; + gnutls_session session; + int rc; + void *ssl_sessionid; + size_t ssl_idsize; + bool sni = TRUE; /* default is SNI enabled */ +#ifdef ENABLE_IPV6 + struct in6_addr addr; +#else + struct in_addr addr; +#endif + + if(conn->ssl[sockindex].state == ssl_connection_complete) + /* to make us tolerant against being called more than once for the + same connection */ + return CURLE_OK; + + if(!gtls_inited) + Curl_gtls_init(); + + /* GnuTLS only supports SSLv3 and TLSv1 */ + if(data->set.ssl.version == CURL_SSLVERSION_SSLv2) { + failf(data, "GnuTLS does not support SSLv2"); + return CURLE_SSL_CONNECT_ERROR; + } + else if(data->set.ssl.version == CURL_SSLVERSION_SSLv3) + sni = FALSE; /* SSLv3 has no SNI */ + + /* allocate a cred struct */ + rc = gnutls_certificate_allocate_credentials(&conn->ssl[sockindex].cred); + if(rc != GNUTLS_E_SUCCESS) { + failf(data, "gnutls_cert_all_cred() failed: %s", gnutls_strerror(rc)); + return CURLE_SSL_CONNECT_ERROR; + } + +#ifdef USE_TLS_SRP + if(data->set.ssl.authtype == CURL_TLSAUTH_SRP) { + infof(data, "Using TLS-SRP username: %s\n", data->set.ssl.username); + + rc = gnutls_srp_allocate_client_credentials( + &conn->ssl[sockindex].srp_client_cred); + if(rc != GNUTLS_E_SUCCESS) { + failf(data, "gnutls_srp_allocate_client_cred() failed: %s", + gnutls_strerror(rc)); + return CURLE_OUT_OF_MEMORY; + } + + rc = gnutls_srp_set_client_credentials(conn->ssl[sockindex]. + srp_client_cred, + data->set.ssl.username, + data->set.ssl.password); + if(rc != GNUTLS_E_SUCCESS) { + failf(data, "gnutls_srp_set_client_cred() failed: %s", + gnutls_strerror(rc)); + return CURLE_BAD_FUNCTION_ARGUMENT; + } + } +#endif + + if(data->set.ssl.CAfile) { + /* set the trusted CA cert bundle file */ + gnutls_certificate_set_verify_flags(conn->ssl[sockindex].cred, + GNUTLS_VERIFY_ALLOW_X509_V1_CA_CRT); + + rc = gnutls_certificate_set_x509_trust_file(conn->ssl[sockindex].cred, + data->set.ssl.CAfile, + GNUTLS_X509_FMT_PEM); + if(rc < 0) { + infof(data, "error reading ca cert file %s (%s)\n", + data->set.ssl.CAfile, gnutls_strerror(rc)); + if(data->set.ssl.verifypeer) + return CURLE_SSL_CACERT_BADFILE; + } + else + infof(data, "found %d certificates in %s\n", + rc, data->set.ssl.CAfile); + } + + if(data->set.ssl.CRLfile) { + /* set the CRL list file */ + rc = gnutls_certificate_set_x509_crl_file(conn->ssl[sockindex].cred, + data->set.ssl.CRLfile, + GNUTLS_X509_FMT_PEM); + if(rc < 0) { + failf(data, "error reading crl file %s (%s)", + data->set.ssl.CRLfile, gnutls_strerror(rc)); + return CURLE_SSL_CRL_BADFILE; + } + else + infof(data, "found %d CRL in %s\n", + rc, data->set.ssl.CRLfile); + } + + /* Initialize TLS session as a client */ + rc = gnutls_init(&conn->ssl[sockindex].session, GNUTLS_CLIENT); + if(rc != GNUTLS_E_SUCCESS) { + failf(data, "gnutls_init() failed: %d", rc); + return CURLE_SSL_CONNECT_ERROR; + } + + /* convenient assign */ + session = conn->ssl[sockindex].session; + + if((0 == Curl_inet_pton(AF_INET, conn->host.name, &addr)) && +#ifdef ENABLE_IPV6 + (0 == Curl_inet_pton(AF_INET6, conn->host.name, &addr)) && +#endif + sni && + (gnutls_server_name_set(session, GNUTLS_NAME_DNS, conn->host.name, + strlen(conn->host.name)) < 0)) + infof(data, "WARNING: failed to configure server name indication (SNI) " + "TLS extension\n"); + + /* Use default priorities */ + rc = gnutls_set_default_priority(session); + if(rc != GNUTLS_E_SUCCESS) + return CURLE_SSL_CONNECT_ERROR; + + if(data->set.ssl.version == CURL_SSLVERSION_SSLv3) { +#ifndef USE_GNUTLS_PRIORITY_SET_DIRECT + static const int protocol_priority[] = { GNUTLS_SSL3, 0 }; + rc = gnutls_protocol_set_priority(session, protocol_priority); +#else + const char *err; + /* the combination of the cipher ARCFOUR with SSL 3.0 and TLS 1.0 is not + vulnerable to attacks such as the BEAST, why this code now explicitly + asks for that + */ + rc = gnutls_priority_set_direct(session, + "NORMAL:-VERS-TLS-ALL:+VERS-SSL3.0:" + "-CIPHER-ALL:+ARCFOUR-128", + &err); +#endif + if(rc != GNUTLS_E_SUCCESS) + return CURLE_SSL_CONNECT_ERROR; + } + +#ifndef USE_GNUTLS_PRIORITY_SET_DIRECT + /* Sets the priority on the certificate types supported by gnutls. Priority + is higher for types specified before others. After specifying the types + you want, you must append a 0. */ + rc = gnutls_certificate_type_set_priority(session, cert_type_priority); + if(rc != GNUTLS_E_SUCCESS) + return CURLE_SSL_CONNECT_ERROR; +#endif + + if(data->set.str[STRING_CERT]) { + if(gnutls_certificate_set_x509_key_file( + conn->ssl[sockindex].cred, + data->set.str[STRING_CERT], + data->set.str[STRING_KEY] ? + data->set.str[STRING_KEY] : data->set.str[STRING_CERT], + do_file_type(data->set.str[STRING_CERT_TYPE]) ) != + GNUTLS_E_SUCCESS) { + failf(data, "error reading X.509 key or certificate file"); + return CURLE_SSL_CONNECT_ERROR; + } + } + +#ifdef USE_TLS_SRP + /* put the credentials to the current session */ + if(data->set.ssl.authtype == CURL_TLSAUTH_SRP) { + rc = gnutls_credentials_set(session, GNUTLS_CRD_SRP, + conn->ssl[sockindex].srp_client_cred); + if(rc != GNUTLS_E_SUCCESS) + failf(data, "gnutls_credentials_set() failed: %s", gnutls_strerror(rc)); + } + else +#endif + rc = gnutls_credentials_set(session, GNUTLS_CRD_CERTIFICATE, + conn->ssl[sockindex].cred); + + /* set the connection handle (file descriptor for the socket) */ + gnutls_transport_set_ptr(session, + GNUTLS_INT_TO_POINTER_CAST(conn->sock[sockindex])); + + /* register callback functions to send and receive data. */ + gnutls_transport_set_push_function(session, Curl_gtls_push); + gnutls_transport_set_pull_function(session, Curl_gtls_pull); + + /* lowat must be set to zero when using custom push and pull functions. */ + gnutls_transport_set_lowat(session, 0); + + /* This might be a reconnect, so we check for a session ID in the cache + to speed up things */ + + if(!Curl_ssl_getsessionid(conn, &ssl_sessionid, &ssl_idsize)) { + /* we got a session id, use it! */ + gnutls_session_set_data(session, ssl_sessionid, ssl_idsize); + + /* Informational message */ + infof (data, "SSL re-using session ID\n"); + } + + return CURLE_OK; +} + +static Curl_recv gtls_recv; +static Curl_send gtls_send; + +static CURLcode +gtls_connect_step3(struct connectdata *conn, + int sockindex) +{ + unsigned int cert_list_size; + const gnutls_datum *chainp; + unsigned int verify_status; + gnutls_x509_crt x509_cert,x509_issuer; + gnutls_datum issuerp; + char certbuf[256]; /* big enough? */ + size_t size; + unsigned int algo; + unsigned int bits; + time_t certclock; + const char *ptr; + struct SessionHandle *data = conn->data; + gnutls_session session = conn->ssl[sockindex].session; + int rc; + int incache; + void *ssl_sessionid; + CURLcode result = CURLE_OK; + + /* This function will return the peer's raw certificate (chain) as sent by + the peer. These certificates are in raw format (DER encoded for + X.509). In case of a X.509 then a certificate list may be present. The + first certificate in the list is the peer's certificate, following the + issuer's certificate, then the issuer's issuer etc. */ + + chainp = gnutls_certificate_get_peers(session, &cert_list_size); + if(!chainp) { + if(data->set.ssl.verifypeer || + data->set.ssl.verifyhost || + data->set.ssl.issuercert) { +#ifdef USE_TLS_SRP + if(data->set.ssl.authtype == CURL_TLSAUTH_SRP + && data->set.ssl.username != NULL + && !data->set.ssl.verifypeer + && gnutls_cipher_get(session)) { + /* no peer cert, but auth is ok if we have SRP user and cipher and no + peer verify */ + } + else { +#endif + failf(data, "failed to get server cert"); + return CURLE_PEER_FAILED_VERIFICATION; +#ifdef USE_TLS_SRP + } +#endif + } + infof(data, "\t common name: WARNING couldn't obtain\n"); + } + + if(data->set.ssl.verifypeer) { + /* This function will try to verify the peer's certificate and return its + status (trusted, invalid etc.). The value of status should be one or + more of the gnutls_certificate_status_t enumerated elements bitwise + or'd. To avoid denial of service attacks some default upper limits + regarding the certificate key size and chain size are set. To override + them use gnutls_certificate_set_verify_limits(). */ + + rc = gnutls_certificate_verify_peers2(session, &verify_status); + if(rc < 0) { + failf(data, "server cert verify failed: %d", rc); + return CURLE_SSL_CONNECT_ERROR; + } + + /* verify_status is a bitmask of gnutls_certificate_status bits */ + if(verify_status & GNUTLS_CERT_INVALID) { + if(data->set.ssl.verifypeer) { + failf(data, "server certificate verification failed. CAfile: %s " + "CRLfile: %s", data->set.ssl.CAfile?data->set.ssl.CAfile:"none", + data->set.ssl.CRLfile?data->set.ssl.CRLfile:"none"); + return CURLE_SSL_CACERT; + } + else + infof(data, "\t server certificate verification FAILED\n"); + } + else + infof(data, "\t server certificate verification OK\n"); + } + else { + infof(data, "\t server certificate verification SKIPPED\n"); + goto after_server_cert_verification; + } + + /* initialize an X.509 certificate structure. */ + gnutls_x509_crt_init(&x509_cert); + + /* convert the given DER or PEM encoded Certificate to the native + gnutls_x509_crt_t format */ + gnutls_x509_crt_import(x509_cert, chainp, GNUTLS_X509_FMT_DER); + + if(data->set.ssl.issuercert) { + gnutls_x509_crt_init(&x509_issuer); + issuerp = load_file(data->set.ssl.issuercert); + gnutls_x509_crt_import(x509_issuer, &issuerp, GNUTLS_X509_FMT_PEM); + rc = gnutls_x509_crt_check_issuer(x509_cert,x509_issuer); + unload_file(issuerp); + if(rc <= 0) { + failf(data, "server certificate issuer check failed (IssuerCert: %s)", + data->set.ssl.issuercert?data->set.ssl.issuercert:"none"); + return CURLE_SSL_ISSUER_ERROR; + } + infof(data,"\t server certificate issuer check OK (Issuer Cert: %s)\n", + data->set.ssl.issuercert?data->set.ssl.issuercert:"none"); + } + + size=sizeof(certbuf); + rc = gnutls_x509_crt_get_dn_by_oid(x509_cert, GNUTLS_OID_X520_COMMON_NAME, + 0, /* the first and only one */ + FALSE, + certbuf, + &size); + if(rc) { + infof(data, "error fetching CN from cert:%s\n", + gnutls_strerror(rc)); + } + + /* This function will check if the given certificate's subject matches the + given hostname. This is a basic implementation of the matching described + in RFC2818 (HTTPS), which takes into account wildcards, and the subject + alternative name PKIX extension. Returns non zero on success, and zero on + failure. */ + rc = gnutls_x509_crt_check_hostname(x509_cert, conn->host.name); + + if(!rc) { + if(data->set.ssl.verifyhost) { + failf(data, "SSL: certificate subject name (%s) does not match " + "target host name '%s'", certbuf, conn->host.dispname); + gnutls_x509_crt_deinit(x509_cert); + return CURLE_PEER_FAILED_VERIFICATION; + } + else + infof(data, "\t common name: %s (does not match '%s')\n", + certbuf, conn->host.dispname); + } + else + infof(data, "\t common name: %s (matched)\n", certbuf); + + /* Check for time-based validity */ + certclock = gnutls_x509_crt_get_expiration_time(x509_cert); + + if(certclock == (time_t)-1) { + failf(data, "server cert expiration date verify failed"); + return CURLE_SSL_CONNECT_ERROR; + } + + if(certclock < time(NULL)) { + if(data->set.ssl.verifypeer) { + failf(data, "server certificate expiration date has passed."); + return CURLE_PEER_FAILED_VERIFICATION; + } + else + infof(data, "\t server certificate expiration date FAILED\n"); + } + else + infof(data, "\t server certificate expiration date OK\n"); + + certclock = gnutls_x509_crt_get_activation_time(x509_cert); + + if(certclock == (time_t)-1) { + failf(data, "server cert activation date verify failed"); + return CURLE_SSL_CONNECT_ERROR; + } + + if(certclock > time(NULL)) { + if(data->set.ssl.verifypeer) { + failf(data, "server certificate not activated yet."); + return CURLE_PEER_FAILED_VERIFICATION; + } + else + infof(data, "\t server certificate activation date FAILED\n"); + } + else + infof(data, "\t server certificate activation date OK\n"); + + /* Show: + + - ciphers used + - subject + - start date + - expire date + - common name + - issuer + + */ + + /* public key algorithm's parameters */ + algo = gnutls_x509_crt_get_pk_algorithm(x509_cert, &bits); + infof(data, "\t certificate public key: %s\n", + gnutls_pk_algorithm_get_name(algo)); + + /* version of the X.509 certificate. */ + infof(data, "\t certificate version: #%d\n", + gnutls_x509_crt_get_version(x509_cert)); + + + size = sizeof(certbuf); + gnutls_x509_crt_get_dn(x509_cert, certbuf, &size); + infof(data, "\t subject: %s\n", certbuf); + + certclock = gnutls_x509_crt_get_activation_time(x509_cert); + showtime(data, "start date", certclock); + + certclock = gnutls_x509_crt_get_expiration_time(x509_cert); + showtime(data, "expire date", certclock); + + size = sizeof(certbuf); + gnutls_x509_crt_get_issuer_dn(x509_cert, certbuf, &size); + infof(data, "\t issuer: %s\n", certbuf); + + gnutls_x509_crt_deinit(x509_cert); + +after_server_cert_verification: + + /* compression algorithm (if any) */ + ptr = gnutls_compression_get_name(gnutls_compression_get(session)); + /* the *_get_name() says "NULL" if GNUTLS_COMP_NULL is returned */ + infof(data, "\t compression: %s\n", ptr); + + /* the name of the cipher used. ie 3DES. */ + ptr = gnutls_cipher_get_name(gnutls_cipher_get(session)); + infof(data, "\t cipher: %s\n", ptr); + + /* the MAC algorithms name. ie SHA1 */ + ptr = gnutls_mac_get_name(gnutls_mac_get(session)); + infof(data, "\t MAC: %s\n", ptr); + + conn->ssl[sockindex].state = ssl_connection_complete; + conn->recv[sockindex] = gtls_recv; + conn->send[sockindex] = gtls_send; + + { + /* we always unconditionally get the session id here, as even if we + already got it from the cache and asked to use it in the connection, it + might've been rejected and then a new one is in use now and we need to + detect that. */ + void *connect_sessionid; + size_t connect_idsize; + + /* get the session ID data size */ + gnutls_session_get_data(session, NULL, &connect_idsize); + connect_sessionid = malloc(connect_idsize); /* get a buffer for it */ + + if(connect_sessionid) { + /* extract session ID to the allocated buffer */ + gnutls_session_get_data(session, connect_sessionid, &connect_idsize); + + incache = !(Curl_ssl_getsessionid(conn, &ssl_sessionid, NULL)); + if(incache) { + /* there was one before in the cache, so instead of risking that the + previous one was rejected, we just kill that and store the new */ + Curl_ssl_delsessionid(conn, ssl_sessionid); + } + + /* store this session id */ + result = Curl_ssl_addsessionid(conn, connect_sessionid, connect_idsize); + if(result) { + free(connect_sessionid); + result = CURLE_OUT_OF_MEMORY; + } + } + else + result = CURLE_OUT_OF_MEMORY; + } + + return result; +} + + +/* + * This function is called after the TCP connect has completed. Setup the TLS + * layer and do all necessary magic. + */ +/* We use connssl->connecting_state to keep track of the connection status; + there are three states: 'ssl_connect_1' (not started yet or complete), + 'ssl_connect_2_reading' (waiting for data from server), and + 'ssl_connect_2_writing' (waiting to be able to write). + */ +static CURLcode +gtls_connect_common(struct connectdata *conn, + int sockindex, + bool nonblocking, + bool *done) +{ + int rc; + struct ssl_connect_data *connssl = &conn->ssl[sockindex]; + + /* Initiate the connection, if not already done */ + if(ssl_connect_1==connssl->connecting_state) { + rc = gtls_connect_step1 (conn, sockindex); + if(rc) + return rc; + } + + rc = handshake(conn, sockindex, TRUE, nonblocking); + if(rc) + /* handshake() sets its own error message with failf() */ + return rc; + + /* Finish connecting once the handshake is done */ + if(ssl_connect_1==connssl->connecting_state) { + rc = gtls_connect_step3(conn, sockindex); + if(rc) + return rc; + } + + *done = ssl_connect_1==connssl->connecting_state; + + return CURLE_OK; +} + +CURLcode +Curl_gtls_connect_nonblocking(struct connectdata *conn, + int sockindex, + bool *done) +{ + return gtls_connect_common(conn, sockindex, TRUE, done); +} + +CURLcode +Curl_gtls_connect(struct connectdata *conn, + int sockindex) + +{ + CURLcode retcode; + bool done = FALSE; + + retcode = gtls_connect_common(conn, sockindex, FALSE, &done); + if(retcode) + return retcode; + + DEBUGASSERT(done); + + return CURLE_OK; +} + +static ssize_t gtls_send(struct connectdata *conn, + int sockindex, + const void *mem, + size_t len, + CURLcode *curlcode) +{ + ssize_t rc = gnutls_record_send(conn->ssl[sockindex].session, mem, len); + + if(rc < 0 ) { + *curlcode = (rc == GNUTLS_E_AGAIN) + ? CURLE_AGAIN + : CURLE_SEND_ERROR; + + rc = -1; + } + + return rc; +} + +void Curl_gtls_close_all(struct SessionHandle *data) +{ + /* FIX: make the OpenSSL code more generic and use parts of it here */ + (void)data; +} + +static void close_one(struct connectdata *conn, + int idx) +{ + if(conn->ssl[idx].session) { + gnutls_bye(conn->ssl[idx].session, GNUTLS_SHUT_RDWR); + gnutls_deinit(conn->ssl[idx].session); + conn->ssl[idx].session = NULL; + } + if(conn->ssl[idx].cred) { + gnutls_certificate_free_credentials(conn->ssl[idx].cred); + conn->ssl[idx].cred = NULL; + } +#ifdef USE_TLS_SRP + if(conn->ssl[idx].srp_client_cred) { + gnutls_srp_free_client_credentials(conn->ssl[idx].srp_client_cred); + conn->ssl[idx].srp_client_cred = NULL; + } +#endif +} + +void Curl_gtls_close(struct connectdata *conn, int sockindex) +{ + close_one(conn, sockindex); +} + +/* + * This function is called to shut down the SSL layer but keep the + * socket open (CCC - Clear Command Channel) + */ +int Curl_gtls_shutdown(struct connectdata *conn, int sockindex) +{ + ssize_t result; + int retval = 0; + struct SessionHandle *data = conn->data; + int done = 0; + char buf[120]; + + /* This has only been tested on the proftpd server, and the mod_tls code + sends a close notify alert without waiting for a close notify alert in + response. Thus we wait for a close notify alert from the server, but + we do not send one. Let's hope other servers do the same... */ + + if(data->set.ftp_ccc == CURLFTPSSL_CCC_ACTIVE) + gnutls_bye(conn->ssl[sockindex].session, GNUTLS_SHUT_WR); + + if(conn->ssl[sockindex].session) { + while(!done) { + int what = Curl_socket_ready(conn->sock[sockindex], + CURL_SOCKET_BAD, SSL_SHUTDOWN_TIMEOUT); + if(what > 0) { + /* Something to read, let's do it and hope that it is the close + notify alert from the server */ + result = gnutls_record_recv(conn->ssl[sockindex].session, + buf, sizeof(buf)); + switch(result) { + case 0: + /* This is the expected response. There was no data but only + the close notify alert */ + done = 1; + break; + case GNUTLS_E_AGAIN: + case GNUTLS_E_INTERRUPTED: + infof(data, "GNUTLS_E_AGAIN || GNUTLS_E_INTERRUPTED\n"); + break; + default: + retval = -1; + done = 1; + break; + } + } + else if(0 == what) { + /* timeout */ + failf(data, "SSL shutdown timeout"); + done = 1; + break; + } + else { + /* anything that gets here is fatally bad */ + failf(data, "select/poll on SSL socket, errno: %d", SOCKERRNO); + retval = -1; + done = 1; + } + } + gnutls_deinit(conn->ssl[sockindex].session); + } + gnutls_certificate_free_credentials(conn->ssl[sockindex].cred); + +#ifdef USE_TLS_SRP + if(data->set.ssl.authtype == CURL_TLSAUTH_SRP + && data->set.ssl.username != NULL) + gnutls_srp_free_client_credentials(conn->ssl[sockindex].srp_client_cred); +#endif + + conn->ssl[sockindex].cred = NULL; + conn->ssl[sockindex].session = NULL; + + return retval; +} + +static ssize_t gtls_recv(struct connectdata *conn, /* connection data */ + int num, /* socketindex */ + char *buf, /* store read data here */ + size_t buffersize, /* max amount to read */ + CURLcode *curlcode) +{ + ssize_t ret; + + ret = gnutls_record_recv(conn->ssl[num].session, buf, buffersize); + if((ret == GNUTLS_E_AGAIN) || (ret == GNUTLS_E_INTERRUPTED)) { + *curlcode = CURLE_AGAIN; + return -1; + } + + if(ret == GNUTLS_E_REHANDSHAKE) { + /* BLOCKING call, this is bad but a work-around for now. Fixing this "the + proper way" takes a whole lot of work. */ + CURLcode rc = handshake(conn, num, FALSE, FALSE); + if(rc) + /* handshake() writes error message on its own */ + *curlcode = rc; + else + *curlcode = CURLE_AGAIN; /* then return as if this was a wouldblock */ + return -1; + } + + if(ret < 0) { + failf(conn->data, "GnuTLS recv error (%d): %s", + (int)ret, gnutls_strerror((int)ret)); + *curlcode = CURLE_RECV_ERROR; + return -1; + } + + return ret; +} + +void Curl_gtls_session_free(void *ptr) +{ + free(ptr); +} + +size_t Curl_gtls_version(char *buffer, size_t size) +{ + return snprintf(buffer, size, "GnuTLS/%s", gnutls_check_version(NULL)); +} + +int Curl_gtls_seed(struct SessionHandle *data) +{ + /* we have the "SSL is seeded" boolean static to prevent multiple + time-consuming seedings in vain */ + static bool ssl_seeded = FALSE; + + /* Quickly add a bit of entropy */ +#ifndef USE_GNUTLS_NETTLE + gcry_fast_random_poll(); +#endif + + if(!ssl_seeded || data->set.str[STRING_SSL_RANDOM_FILE] || + data->set.str[STRING_SSL_EGDSOCKET]) { + + /* TODO: to a good job seeding the RNG + This may involve the gcry_control function and these options: + GCRYCTL_SET_RANDOM_SEED_FILE + GCRYCTL_SET_RNDEGD_SOCKET + */ + ssl_seeded = TRUE; + } + return 0; +} + +void Curl_gtls_random(struct SessionHandle *data, + unsigned char *entropy, + size_t length) +{ +#if defined(USE_GNUTLS_NETTLE) + (void)data; + gnutls_rnd(GNUTLS_RND_RANDOM, entropy, length); +#elif defined(USE_GNUTLS) + Curl_gtls_seed(data); /* Initiate the seed if not already done */ + gcry_randomize(entropy, length, GCRY_STRONG_RANDOM); +#endif +} + +void Curl_gtls_md5sum(unsigned char *tmp, /* input */ + size_t tmplen, + unsigned char *md5sum, /* output */ + size_t md5len) +{ +#if defined(USE_GNUTLS_NETTLE) + struct md5_ctx MD5pw; + md5_init(&MD5pw); + md5_update(&MD5pw, tmplen, tmp); + md5_digest(&MD5pw, md5len, md5sum); +#elif defined(USE_GNUTLS) + gcry_md_hd_t MD5pw; + gcry_md_open(&MD5pw, GCRY_MD_MD5, 0); + gcry_md_write(MD5pw, tmp, tmplen); + memcpy(md5sum, gcry_md_read (MD5pw, 0), md5len); + gcry_md_close(MD5pw); +#endif +} + +#endif /* USE_GNUTLS */ |