1 files changed, 140 insertions, 140 deletions
diff --git a/plugins/FreeImage/Source/LibJPEG/jdtrans.c b/plugins/FreeImage/Source/LibJPEG/jdtrans.c
index a51d69de44..22dd47fb5c 100644
--- a/plugins/FreeImage/Source/LibJPEG/jdtrans.c
+++ b/plugins/FreeImage/Source/LibJPEG/jdtrans.c
@@ -1,140 +1,140 @@
-/*
- * jdtrans.c
- *
- * Copyright (C) 1995-1997, Thomas G. Lane.
- * Modified 2000-2009 by Guido Vollbeding.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains library routines for transcoding decompression,
- * that is, reading raw DCT coefficient arrays from an input JPEG file.
- * The routines in jdapimin.c will also be needed by a transcoder.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/* Forward declarations */
-LOCAL(void) transdecode_master_selection JPP((j_decompress_ptr cinfo));
-
-
-/*
- * Read the coefficient arrays from a JPEG file.
- * jpeg_read_header must be completed before calling this.
- *
- * The entire image is read into a set of virtual coefficient-block arrays,
- * one per component.  The return value is a pointer to the array of
- * virtual-array descriptors.  These can be manipulated directly via the
- * JPEG memory manager, or handed off to jpeg_write_coefficients().
- * To release the memory occupied by the virtual arrays, call
- * jpeg_finish_decompress() when done with the data.
- *
- * An alternative usage is to simply obtain access to the coefficient arrays
- * during a buffered-image-mode decompression operation.  This is allowed
- * after any jpeg_finish_output() call.  The arrays can be accessed until
- * jpeg_finish_decompress() is called.  (Note that any call to the library
- * may reposition the arrays, so don't rely on access_virt_barray() results
- * to stay valid across library calls.)
- *
- * Returns NULL if suspended.  This case need be checked only if
- * a suspending data source is used.
- */
-
-GLOBAL(jvirt_barray_ptr *)
-jpeg_read_coefficients (j_decompress_ptr cinfo)
-{
-  if (cinfo->global_state == DSTATE_READY) {
-    /* First call: initialize active modules */
-    transdecode_master_selection(cinfo);
-    cinfo->global_state = DSTATE_RDCOEFS;
-  }
-  if (cinfo->global_state == DSTATE_RDCOEFS) {
-    /* Absorb whole file into the coef buffer */
-    for (;;) {
-      int retcode;
-      /* Call progress monitor hook if present */
-      if (cinfo->progress != NULL)
-	(*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
-      /* Absorb some more input */
-      retcode = (*cinfo->inputctl->consume_input) (cinfo);
-      if (retcode == JPEG_SUSPENDED)
-	return NULL;
-      if (retcode == JPEG_REACHED_EOI)
-	break;
-      /* Advance progress counter if appropriate */
-      if (cinfo->progress != NULL &&
-	  (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) {
-	if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) {
-	  /* startup underestimated number of scans; ratchet up one scan */
-	  cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows;
-	}
-      }
-    }
-    /* Set state so that jpeg_finish_decompress does the right thing */
-    cinfo->global_state = DSTATE_STOPPING;
-  }
-  /* At this point we should be in state DSTATE_STOPPING if being used
-   * standalone, or in state DSTATE_BUFIMAGE if being invoked to get access
-   * to the coefficients during a full buffered-image-mode decompression.
-   */
-  if ((cinfo->global_state == DSTATE_STOPPING ||
-       cinfo->global_state == DSTATE_BUFIMAGE) && cinfo->buffered_image) {
-    return cinfo->coef->coef_arrays;
-  }
-  /* Oops, improper usage */
-  ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-  return NULL;			/* keep compiler happy */
-}
-
-
-/*
- * Master selection of decompression modules for transcoding.
- * This substitutes for jdmaster.c's initialization of the full decompressor.
- */
-
-LOCAL(void)
-transdecode_master_selection (j_decompress_ptr cinfo)
-{
-  /* This is effectively a buffered-image operation. */
-  cinfo->buffered_image = TRUE;
-
-  /* Compute output image dimensions and related values. */
-  jpeg_core_output_dimensions(cinfo);
-
-  /* Entropy decoding: either Huffman or arithmetic coding. */
-  if (cinfo->arith_code)
-    jinit_arith_decoder(cinfo);
-  else {
-    jinit_huff_decoder(cinfo);
-  }
-
-  /* Always get a full-image coefficient buffer. */
-  jinit_d_coef_controller(cinfo, TRUE);
-
-  /* We can now tell the memory manager to allocate virtual arrays. */
-  (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo);
-
-  /* Initialize input side of decompressor to consume first scan. */
-  (*cinfo->inputctl->start_input_pass) (cinfo);
-
-  /* Initialize progress monitoring. */
-  if (cinfo->progress != NULL) {
-    int nscans;
-    /* Estimate number of scans to set pass_limit. */
-    if (cinfo->progressive_mode) {
-      /* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */
-      nscans = 2 + 3 * cinfo->num_components;
-    } else if (cinfo->inputctl->has_multiple_scans) {
-      /* For a nonprogressive multiscan file, estimate 1 scan per component. */
-      nscans = cinfo->num_components;
-    } else {
-      nscans = 1;
-    }
-    cinfo->progress->pass_counter = 0L;
-    cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans;
-    cinfo->progress->completed_passes = 0;
-    cinfo->progress->total_passes = 1;
-  }
-}
+/*
+ * jdtrans.c
+ *
+ * Copyright (C) 1995-1997, Thomas G. Lane.
+ * Modified 2000-2009 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains library routines for transcoding decompression,
+ * that is, reading raw DCT coefficient arrays from an input JPEG file.
+ * The routines in jdapimin.c will also be needed by a transcoder.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Forward declarations */
+LOCAL(void) transdecode_master_selection JPP((j_decompress_ptr cinfo));
+
+
+/*
+ * Read the coefficient arrays from a JPEG file.
+ * jpeg_read_header must be completed before calling this.
+ *
+ * The entire image is read into a set of virtual coefficient-block arrays,
+ * one per component.  The return value is a pointer to the array of
+ * virtual-array descriptors.  These can be manipulated directly via the
+ * JPEG memory manager, or handed off to jpeg_write_coefficients().
+ * To release the memory occupied by the virtual arrays, call
+ * jpeg_finish_decompress() when done with the data.
+ *
+ * An alternative usage is to simply obtain access to the coefficient arrays
+ * during a buffered-image-mode decompression operation.  This is allowed
+ * after any jpeg_finish_output() call.  The arrays can be accessed until
+ * jpeg_finish_decompress() is called.  (Note that any call to the library
+ * may reposition the arrays, so don't rely on access_virt_barray() results
+ * to stay valid across library calls.)
+ *
+ * Returns NULL if suspended.  This case need be checked only if
+ * a suspending data source is used.
+ */
+
+GLOBAL(jvirt_barray_ptr *)
+jpeg_read_coefficients (j_decompress_ptr cinfo)
+{
+  if (cinfo->global_state == DSTATE_READY) {
+    /* First call: initialize active modules */
+    transdecode_master_selection(cinfo);
+    cinfo->global_state = DSTATE_RDCOEFS;
+  }
+  if (cinfo->global_state == DSTATE_RDCOEFS) {
+    /* Absorb whole file into the coef buffer */
+    for (;;) {
+      int retcode;
+      /* Call progress monitor hook if present */
+      if (cinfo->progress != NULL)
+	(*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
+      /* Absorb some more input */
+      retcode = (*cinfo->inputctl->consume_input) (cinfo);
+      if (retcode == JPEG_SUSPENDED)
+	return NULL;
+      if (retcode == JPEG_REACHED_EOI)
+	break;
+      /* Advance progress counter if appropriate */
+      if (cinfo->progress != NULL &&
+	  (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) {
+	if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) {
+	  /* startup underestimated number of scans; ratchet up one scan */
+	  cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows;
+	}
+      }
+    }
+    /* Set state so that jpeg_finish_decompress does the right thing */
+    cinfo->global_state = DSTATE_STOPPING;
+  }
+  /* At this point we should be in state DSTATE_STOPPING if being used
+   * standalone, or in state DSTATE_BUFIMAGE if being invoked to get access
+   * to the coefficients during a full buffered-image-mode decompression.
+   */
+  if ((cinfo->global_state == DSTATE_STOPPING ||
+       cinfo->global_state == DSTATE_BUFIMAGE) && cinfo->buffered_image) {
+    return cinfo->coef->coef_arrays;
+  }
+  /* Oops, improper usage */
+  ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  return NULL;			/* keep compiler happy */
+}
+
+
+/*
+ * Master selection of decompression modules for transcoding.
+ * This substitutes for jdmaster.c's initialization of the full decompressor.
+ */
+
+LOCAL(void)
+transdecode_master_selection (j_decompress_ptr cinfo)
+{
+  /* This is effectively a buffered-image operation. */
+  cinfo->buffered_image = TRUE;
+
+  /* Compute output image dimensions and related values. */
+  jpeg_core_output_dimensions(cinfo);
+
+  /* Entropy decoding: either Huffman or arithmetic coding. */
+  if (cinfo->arith_code)
+    jinit_arith_decoder(cinfo);
+  else {
+    jinit_huff_decoder(cinfo);
+  }
+
+  /* Always get a full-image coefficient buffer. */
+  jinit_d_coef_controller(cinfo, TRUE);
+
+  /* We can now tell the memory manager to allocate virtual arrays. */
+  (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo);
+
+  /* Initialize input side of decompressor to consume first scan. */
+  (*cinfo->inputctl->start_input_pass) (cinfo);
+
+  /* Initialize progress monitoring. */
+  if (cinfo->progress != NULL) {
+    int nscans;
+    /* Estimate number of scans to set pass_limit. */
+    if (cinfo->progressive_mode) {
+      /* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */
+      nscans = 2 + 3 * cinfo->num_components;
+    } else if (cinfo->inputctl->has_multiple_scans) {
+      /* For a nonprogressive multiscan file, estimate 1 scan per component. */
+      nscans = cinfo->num_components;
+    } else {
+      nscans = 1;
+    }
+    cinfo->progress->pass_counter = 0L;
+    cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans;
+    cinfo->progress->completed_passes = 0;
+    cinfo->progress->total_passes = 1;
+  }
+}