diff options
Diffstat (limited to 'plugins/Pcre16/docs/doc/html/pcreunicode.html')
| -rw-r--r-- | plugins/Pcre16/docs/doc/html/pcreunicode.html | 262 |
1 files changed, 0 insertions, 262 deletions
diff --git a/plugins/Pcre16/docs/doc/html/pcreunicode.html b/plugins/Pcre16/docs/doc/html/pcreunicode.html deleted file mode 100644 index ab36bc61e3..0000000000 --- a/plugins/Pcre16/docs/doc/html/pcreunicode.html +++ /dev/null @@ -1,262 +0,0 @@ -<html> -<head> -<title>pcreunicode specification</title> -</head> -<body bgcolor="#FFFFFF" text="#00005A" link="#0066FF" alink="#3399FF" vlink="#2222BB"> -<h1>pcreunicode man page</h1> -<p> -Return to the <a href="index.html">PCRE index page</a>. -</p> -<p> -This page is part of the PCRE HTML documentation. It was generated automatically -from the original man page. If there is any nonsense in it, please consult the -man page, in case the conversion went wrong. -<br> -<br><b> -UTF-8, UTF-16, UTF-32, AND UNICODE PROPERTY SUPPORT -</b><br> -<P> -As well as UTF-8 support, PCRE also supports UTF-16 (from release 8.30) and -UTF-32 (from release 8.32), by means of two additional libraries. They can be -built as well as, or instead of, the 8-bit library. -</P> -<br><b> -UTF-8 SUPPORT -</b><br> -<P> -In order process UTF-8 strings, you must build PCRE's 8-bit library with UTF -support, and, in addition, you must call -<a href="pcre_compile.html"><b>pcre_compile()</b></a> -with the PCRE_UTF8 option flag, or the pattern must start with the sequence -(*UTF8) or (*UTF). When either of these is the case, both the pattern and any -subject strings that are matched against it are treated as UTF-8 strings -instead of strings of individual 1-byte characters. -</P> -<br><b> -UTF-16 AND UTF-32 SUPPORT -</b><br> -<P> -In order process UTF-16 or UTF-32 strings, you must build PCRE's 16-bit or -32-bit library with UTF support, and, in addition, you must call -<a href="pcre16_compile.html"><b>pcre16_compile()</b></a> -or -<a href="pcre32_compile.html"><b>pcre32_compile()</b></a> -with the PCRE_UTF16 or PCRE_UTF32 option flag, as appropriate. Alternatively, -the pattern must start with the sequence (*UTF16), (*UTF32), as appropriate, or -(*UTF), which can be used with either library. When UTF mode is set, both the -pattern and any subject strings that are matched against it are treated as -UTF-16 or UTF-32 strings instead of strings of individual 16-bit or 32-bit -characters. -</P> -<br><b> -UTF SUPPORT OVERHEAD -</b><br> -<P> -If you compile PCRE with UTF support, but do not use it at run time, the -library will be a bit bigger, but the additional run time overhead is limited -to testing the PCRE_UTF[8|16|32] flag occasionally, so should not be very big. -</P> -<br><b> -UNICODE PROPERTY SUPPORT -</b><br> -<P> -If PCRE is built with Unicode character property support (which implies UTF -support), the escape sequences \p{..}, \P{..}, and \X can be used. -The available properties that can be tested are limited to the general -category properties such as Lu for an upper case letter or Nd for a decimal -number, the Unicode script names such as Arabic or Han, and the derived -properties Any and L&. Full lists is given in the -<a href="pcrepattern.html"><b>pcrepattern</b></a> -and -<a href="pcresyntax.html"><b>pcresyntax</b></a> -documentation. Only the short names for properties are supported. For example, -\p{L} matches a letter. Its Perl synonym, \p{Letter}, is not supported. -Furthermore, in Perl, many properties may optionally be prefixed by "Is", for -compatibility with Perl 5.6. PCRE does not support this. -<a name="utf8strings"></a></P> -<br><b> -Validity of UTF-8 strings -</b><br> -<P> -When you set the PCRE_UTF8 flag, the byte strings passed as patterns and -subjects are (by default) checked for validity on entry to the relevant -functions. The entire string is checked before any other processing takes -place. From release 7.3 of PCRE, the check is according the rules of RFC 3629, -which are themselves derived from the Unicode specification. Earlier releases -of PCRE followed the rules of RFC 2279, which allows the full range of 31-bit -values (0 to 0x7FFFFFFF). The current check allows only values in the range U+0 -to U+10FFFF, excluding the surrogate area. (From release 8.33 the so-called -"non-character" code points are no longer excluded because Unicode corrigendum -#9 makes it clear that they should not be.) -</P> -<P> -Characters in the "Surrogate Area" of Unicode are reserved for use by UTF-16, -where they are used in pairs to encode codepoints with values greater than -0xFFFF. The code points that are encoded by UTF-16 pairs are available -independently in the UTF-8 and UTF-32 encodings. (In other words, the whole -surrogate thing is a fudge for UTF-16 which unfortunately messes up UTF-8 and -UTF-32.) -</P> -<P> -If an invalid UTF-8 string is passed to PCRE, an error return is given. At -compile time, the only additional information is the offset to the first byte -of the failing character. The run-time functions <b>pcre_exec()</b> and -<b>pcre_dfa_exec()</b> also pass back this information, as well as a more -detailed reason code if the caller has provided memory in which to do this. -</P> -<P> -In some situations, you may already know that your strings are valid, and -therefore want to skip these checks in order to improve performance, for -example in the case of a long subject string that is being scanned repeatedly. -If you set the PCRE_NO_UTF8_CHECK flag at compile time or at run time, PCRE -assumes that the pattern or subject it is given (respectively) contains only -valid UTF-8 codes. In this case, it does not diagnose an invalid UTF-8 string. -</P> -<P> -Note that passing PCRE_NO_UTF8_CHECK to <b>pcre_compile()</b> just disables the -check for the pattern; it does not also apply to subject strings. If you want -to disable the check for a subject string you must pass this option to -<b>pcre_exec()</b> or <b>pcre_dfa_exec()</b>. -</P> -<P> -If you pass an invalid UTF-8 string when PCRE_NO_UTF8_CHECK is set, the result -is undefined and your program may crash. -<a name="utf16strings"></a></P> -<br><b> -Validity of UTF-16 strings -</b><br> -<P> -When you set the PCRE_UTF16 flag, the strings of 16-bit data units that are -passed as patterns and subjects are (by default) checked for validity on entry -to the relevant functions. Values other than those in the surrogate range -U+D800 to U+DFFF are independent code points. Values in the surrogate range -must be used in pairs in the correct manner. -</P> -<P> -If an invalid UTF-16 string is passed to PCRE, an error return is given. At -compile time, the only additional information is the offset to the first data -unit of the failing character. The run-time functions <b>pcre16_exec()</b> and -<b>pcre16_dfa_exec()</b> also pass back this information, as well as a more -detailed reason code if the caller has provided memory in which to do this. -</P> -<P> -In some situations, you may already know that your strings are valid, and -therefore want to skip these checks in order to improve performance. If you set -the PCRE_NO_UTF16_CHECK flag at compile time or at run time, PCRE assumes that -the pattern or subject it is given (respectively) contains only valid UTF-16 -sequences. In this case, it does not diagnose an invalid UTF-16 string. -However, if an invalid string is passed, the result is undefined. -<a name="utf32strings"></a></P> -<br><b> -Validity of UTF-32 strings -</b><br> -<P> -When you set the PCRE_UTF32 flag, the strings of 32-bit data units that are -passed as patterns and subjects are (by default) checked for validity on entry -to the relevant functions. This check allows only values in the range U+0 -to U+10FFFF, excluding the surrogate area U+D800 to U+DFFF. -</P> -<P> -If an invalid UTF-32 string is passed to PCRE, an error return is given. At -compile time, the only additional information is the offset to the first data -unit of the failing character. The run-time functions <b>pcre32_exec()</b> and -<b>pcre32_dfa_exec()</b> also pass back this information, as well as a more -detailed reason code if the caller has provided memory in which to do this. -</P> -<P> -In some situations, you may already know that your strings are valid, and -therefore want to skip these checks in order to improve performance. If you set -the PCRE_NO_UTF32_CHECK flag at compile time or at run time, PCRE assumes that -the pattern or subject it is given (respectively) contains only valid UTF-32 -sequences. In this case, it does not diagnose an invalid UTF-32 string. -However, if an invalid string is passed, the result is undefined. -</P> -<br><b> -General comments about UTF modes -</b><br> -<P> -1. Codepoints less than 256 can be specified in patterns by either braced or -unbraced hexadecimal escape sequences (for example, \x{b3} or \xb3). Larger -values have to use braced sequences. -</P> -<P> -2. Octal numbers up to \777 are recognized, and in UTF-8 mode they match -two-byte characters for values greater than \177. -</P> -<P> -3. Repeat quantifiers apply to complete UTF characters, not to individual -data units, for example: \x{100}{3}. -</P> -<P> -4. The dot metacharacter matches one UTF character instead of a single data -unit. -</P> -<P> -5. The escape sequence \C can be used to match a single byte in UTF-8 mode, or -a single 16-bit data unit in UTF-16 mode, or a single 32-bit data unit in -UTF-32 mode, but its use can lead to some strange effects because it breaks up -multi-unit characters (see the description of \C in the -<a href="pcrepattern.html"><b>pcrepattern</b></a> -documentation). The use of \C is not supported in the alternative matching -function <b>pcre[16|32]_dfa_exec()</b>, nor is it supported in UTF mode by the -JIT optimization of <b>pcre[16|32]_exec()</b>. If JIT optimization is requested -for a UTF pattern that contains \C, it will not succeed, and so the matching -will be carried out by the normal interpretive function. -</P> -<P> -6. The character escapes \b, \B, \d, \D, \s, \S, \w, and \W correctly -test characters of any code value, but, by default, the characters that PCRE -recognizes as digits, spaces, or word characters remain the same set as in -non-UTF mode, all with values less than 256. This remains true even when PCRE -is built to include Unicode property support, because to do otherwise would -slow down PCRE in many common cases. Note in particular that this applies to -\b and \B, because they are defined in terms of \w and \W. If you really -want to test for a wider sense of, say, "digit", you can use explicit Unicode -property tests such as \p{Nd}. Alternatively, if you set the PCRE_UCP option, -the way that the character escapes work is changed so that Unicode properties -are used to determine which characters match. There are more details in the -section on -<a href="pcrepattern.html#genericchartypes">generic character types</a> -in the -<a href="pcrepattern.html"><b>pcrepattern</b></a> -documentation. -</P> -<P> -7. Similarly, characters that match the POSIX named character classes are all -low-valued characters, unless the PCRE_UCP option is set. -</P> -<P> -8. However, the horizontal and vertical white space matching escapes (\h, \H, -\v, and \V) do match all the appropriate Unicode characters, whether or not -PCRE_UCP is set. -</P> -<P> -9. Case-insensitive matching applies only to characters whose values are less -than 128, unless PCRE is built with Unicode property support. A few Unicode -characters such as Greek sigma have more than two codepoints that are -case-equivalent. Up to and including PCRE release 8.31, only one-to-one case -mappings were supported, but later releases (with Unicode property support) do -treat as case-equivalent all versions of characters such as Greek sigma. -</P> -<br><b> -AUTHOR -</b><br> -<P> -Philip Hazel -<br> -University Computing Service -<br> -Cambridge CB2 3QH, England. -<br> -</P> -<br><b> -REVISION -</b><br> -<P> -Last updated: 27 February 2013 -<br> -Copyright © 1997-2013 University of Cambridge. -<br> -<p> -Return to the <a href="index.html">PCRE index page</a>. -</p> |