diff options
Diffstat (limited to 'plugins/Pcre16/src/pcre_dfa_exec.c')
| -rw-r--r-- | plugins/Pcre16/src/pcre_dfa_exec.c | 3674 |
1 files changed, 0 insertions, 3674 deletions
diff --git a/plugins/Pcre16/src/pcre_dfa_exec.c b/plugins/Pcre16/src/pcre_dfa_exec.c deleted file mode 100644 index 170ce6a001..0000000000 --- a/plugins/Pcre16/src/pcre_dfa_exec.c +++ /dev/null @@ -1,3674 +0,0 @@ -/************************************************* -* Perl-Compatible Regular Expressions * -*************************************************/ - -/* PCRE is a library of functions to support regular expressions whose syntax -and semantics are as close as possible to those of the Perl 5 language (but see -below for why this module is different). - - Written by Philip Hazel - Copyright (c) 1997-2014 University of Cambridge - ------------------------------------------------------------------------------ -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of the University of Cambridge nor the names of its - contributors may be used to endorse or promote products derived from - this software without specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE -LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. ------------------------------------------------------------------------------ -*/ - -/* This module contains the external function pcre_dfa_exec(), which is an -alternative matching function that uses a sort of DFA algorithm (not a true -FSM). This is NOT Perl-compatible, but it has advantages in certain -applications. */ - - -/* NOTE ABOUT PERFORMANCE: A user of this function sent some code that improved -the performance of his patterns greatly. I could not use it as it stood, as it -was not thread safe, and made assumptions about pattern sizes. Also, it caused -test 7 to loop, and test 9 to crash with a segfault. - -The issue is the check for duplicate states, which is done by a simple linear -search up the state list. (Grep for "duplicate" below to find the code.) For -many patterns, there will never be many states active at one time, so a simple -linear search is fine. In patterns that have many active states, it might be a -bottleneck. The suggested code used an indexing scheme to remember which states -had previously been used for each character, and avoided the linear search when -it knew there was no chance of a duplicate. This was implemented when adding -states to the state lists. - -I wrote some thread-safe, not-limited code to try something similar at the time -of checking for duplicates (instead of when adding states), using index vectors -on the stack. It did give a 13% improvement with one specially constructed -pattern for certain subject strings, but on other strings and on many of the -simpler patterns in the test suite it did worse. The major problem, I think, -was the extra time to initialize the index. This had to be done for each call -of internal_dfa_exec(). (The supplied patch used a static vector, initialized -only once - I suspect this was the cause of the problems with the tests.) - -Overall, I concluded that the gains in some cases did not outweigh the losses -in others, so I abandoned this code. */ - - - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#define NLBLOCK md /* Block containing newline information */ -#define PSSTART start_subject /* Field containing processed string start */ -#define PSEND end_subject /* Field containing processed string end */ - -#include "pcre_internal.h" - - -/* For use to indent debugging output */ - -#define SP " " - - -/************************************************* -* Code parameters and static tables * -*************************************************/ - -/* These are offsets that are used to turn the OP_TYPESTAR and friends opcodes -into others, under special conditions. A gap of 20 between the blocks should be -enough. The resulting opcodes don't have to be less than 256 because they are -never stored, so we push them well clear of the normal opcodes. */ - -#define OP_PROP_EXTRA 300 -#define OP_EXTUNI_EXTRA 320 -#define OP_ANYNL_EXTRA 340 -#define OP_HSPACE_EXTRA 360 -#define OP_VSPACE_EXTRA 380 - - -/* This table identifies those opcodes that are followed immediately by a -character that is to be tested in some way. This makes it possible to -centralize the loading of these characters. In the case of Type * etc, the -"character" is the opcode for \D, \d, \S, \s, \W, or \w, which will always be a -small value. Non-zero values in the table are the offsets from the opcode where -the character is to be found. ***NOTE*** If the start of this table is -modified, the three tables that follow must also be modified. */ - -static const pcre_uint8 coptable[] = { - 0, /* End */ - 0, 0, 0, 0, 0, /* \A, \G, \K, \B, \b */ - 0, 0, 0, 0, 0, 0, /* \D, \d, \S, \s, \W, \w */ - 0, 0, 0, /* Any, AllAny, Anybyte */ - 0, 0, /* \P, \p */ - 0, 0, 0, 0, 0, /* \R, \H, \h, \V, \v */ - 0, /* \X */ - 0, 0, 0, 0, 0, 0, /* \Z, \z, $, $M, ^, ^M */ - 1, /* Char */ - 1, /* Chari */ - 1, /* not */ - 1, /* noti */ - /* Positive single-char repeats */ - 1, 1, 1, 1, 1, 1, /* *, *?, +, +?, ?, ?? */ - 1+IMM2_SIZE, 1+IMM2_SIZE, /* upto, minupto */ - 1+IMM2_SIZE, /* exact */ - 1, 1, 1, 1+IMM2_SIZE, /* *+, ++, ?+, upto+ */ - 1, 1, 1, 1, 1, 1, /* *I, *?I, +I, +?I, ?I, ??I */ - 1+IMM2_SIZE, 1+IMM2_SIZE, /* upto I, minupto I */ - 1+IMM2_SIZE, /* exact I */ - 1, 1, 1, 1+IMM2_SIZE, /* *+I, ++I, ?+I, upto+I */ - /* Negative single-char repeats - only for chars < 256 */ - 1, 1, 1, 1, 1, 1, /* NOT *, *?, +, +?, ?, ?? */ - 1+IMM2_SIZE, 1+IMM2_SIZE, /* NOT upto, minupto */ - 1+IMM2_SIZE, /* NOT exact */ - 1, 1, 1, 1+IMM2_SIZE, /* NOT *+, ++, ?+, upto+ */ - 1, 1, 1, 1, 1, 1, /* NOT *I, *?I, +I, +?I, ?I, ??I */ - 1+IMM2_SIZE, 1+IMM2_SIZE, /* NOT upto I, minupto I */ - 1+IMM2_SIZE, /* NOT exact I */ - 1, 1, 1, 1+IMM2_SIZE, /* NOT *+I, ++I, ?+I, upto+I */ - /* Positive type repeats */ - 1, 1, 1, 1, 1, 1, /* Type *, *?, +, +?, ?, ?? */ - 1+IMM2_SIZE, 1+IMM2_SIZE, /* Type upto, minupto */ - 1+IMM2_SIZE, /* Type exact */ - 1, 1, 1, 1+IMM2_SIZE, /* Type *+, ++, ?+, upto+ */ - /* Character class & ref repeats */ - 0, 0, 0, 0, 0, 0, /* *, *?, +, +?, ?, ?? */ - 0, 0, /* CRRANGE, CRMINRANGE */ - 0, 0, 0, 0, /* Possessive *+, ++, ?+, CRPOSRANGE */ - 0, /* CLASS */ - 0, /* NCLASS */ - 0, /* XCLASS - variable length */ - 0, /* REF */ - 0, /* REFI */ - 0, /* DNREF */ - 0, /* DNREFI */ - 0, /* RECURSE */ - 0, /* CALLOUT */ - 0, /* Alt */ - 0, /* Ket */ - 0, /* KetRmax */ - 0, /* KetRmin */ - 0, /* KetRpos */ - 0, /* Reverse */ - 0, /* Assert */ - 0, /* Assert not */ - 0, /* Assert behind */ - 0, /* Assert behind not */ - 0, 0, /* ONCE, ONCE_NC */ - 0, 0, 0, 0, 0, /* BRA, BRAPOS, CBRA, CBRAPOS, COND */ - 0, 0, 0, 0, 0, /* SBRA, SBRAPOS, SCBRA, SCBRAPOS, SCOND */ - 0, 0, /* CREF, DNCREF */ - 0, 0, /* RREF, DNRREF */ - 0, /* DEF */ - 0, 0, 0, /* BRAZERO, BRAMINZERO, BRAPOSZERO */ - 0, 0, 0, /* MARK, PRUNE, PRUNE_ARG */ - 0, 0, 0, 0, /* SKIP, SKIP_ARG, THEN, THEN_ARG */ - 0, 0, 0, 0, /* COMMIT, FAIL, ACCEPT, ASSERT_ACCEPT */ - 0, 0 /* CLOSE, SKIPZERO */ -}; - -/* This table identifies those opcodes that inspect a character. It is used to -remember the fact that a character could have been inspected when the end of -the subject is reached. ***NOTE*** If the start of this table is modified, the -two tables that follow must also be modified. */ - -static const pcre_uint8 poptable[] = { - 0, /* End */ - 0, 0, 0, 1, 1, /* \A, \G, \K, \B, \b */ - 1, 1, 1, 1, 1, 1, /* \D, \d, \S, \s, \W, \w */ - 1, 1, 1, /* Any, AllAny, Anybyte */ - 1, 1, /* \P, \p */ - 1, 1, 1, 1, 1, /* \R, \H, \h, \V, \v */ - 1, /* \X */ - 0, 0, 0, 0, 0, 0, /* \Z, \z, $, $M, ^, ^M */ - 1, /* Char */ - 1, /* Chari */ - 1, /* not */ - 1, /* noti */ - /* Positive single-char repeats */ - 1, 1, 1, 1, 1, 1, /* *, *?, +, +?, ?, ?? */ - 1, 1, 1, /* upto, minupto, exact */ - 1, 1, 1, 1, /* *+, ++, ?+, upto+ */ - 1, 1, 1, 1, 1, 1, /* *I, *?I, +I, +?I, ?I, ??I */ - 1, 1, 1, /* upto I, minupto I, exact I */ - 1, 1, 1, 1, /* *+I, ++I, ?+I, upto+I */ - /* Negative single-char repeats - only for chars < 256 */ - 1, 1, 1, 1, 1, 1, /* NOT *, *?, +, +?, ?, ?? */ - 1, 1, 1, /* NOT upto, minupto, exact */ - 1, 1, 1, 1, /* NOT *+, ++, ?+, upto+ */ - 1, 1, 1, 1, 1, 1, /* NOT *I, *?I, +I, +?I, ?I, ??I */ - 1, 1, 1, /* NOT upto I, minupto I, exact I */ - 1, 1, 1, 1, /* NOT *+I, ++I, ?+I, upto+I */ - /* Positive type repeats */ - 1, 1, 1, 1, 1, 1, /* Type *, *?, +, +?, ?, ?? */ - 1, 1, 1, /* Type upto, minupto, exact */ - 1, 1, 1, 1, /* Type *+, ++, ?+, upto+ */ - /* Character class & ref repeats */ - 1, 1, 1, 1, 1, 1, /* *, *?, +, +?, ?, ?? */ - 1, 1, /* CRRANGE, CRMINRANGE */ - 1, 1, 1, 1, /* Possessive *+, ++, ?+, CRPOSRANGE */ - 1, /* CLASS */ - 1, /* NCLASS */ - 1, /* XCLASS - variable length */ - 0, /* REF */ - 0, /* REFI */ - 0, /* DNREF */ - 0, /* DNREFI */ - 0, /* RECURSE */ - 0, /* CALLOUT */ - 0, /* Alt */ - 0, /* Ket */ - 0, /* KetRmax */ - 0, /* KetRmin */ - 0, /* KetRpos */ - 0, /* Reverse */ - 0, /* Assert */ - 0, /* Assert not */ - 0, /* Assert behind */ - 0, /* Assert behind not */ - 0, 0, /* ONCE, ONCE_NC */ - 0, 0, 0, 0, 0, /* BRA, BRAPOS, CBRA, CBRAPOS, COND */ - 0, 0, 0, 0, 0, /* SBRA, SBRAPOS, SCBRA, SCBRAPOS, SCOND */ - 0, 0, /* CREF, DNCREF */ - 0, 0, /* RREF, DNRREF */ - 0, /* DEF */ - 0, 0, 0, /* BRAZERO, BRAMINZERO, BRAPOSZERO */ - 0, 0, 0, /* MARK, PRUNE, PRUNE_ARG */ - 0, 0, 0, 0, /* SKIP, SKIP_ARG, THEN, THEN_ARG */ - 0, 0, 0, 0, /* COMMIT, FAIL, ACCEPT, ASSERT_ACCEPT */ - 0, 0 /* CLOSE, SKIPZERO */ -}; - -/* These 2 tables allow for compact code for testing for \D, \d, \S, \s, \W, -and \w */ - -static const pcre_uint8 toptable1[] = { - 0, 0, 0, 0, 0, 0, - ctype_digit, ctype_digit, - ctype_space, ctype_space, - ctype_word, ctype_word, - 0, 0 /* OP_ANY, OP_ALLANY */ -}; - -static const pcre_uint8 toptable2[] = { - 0, 0, 0, 0, 0, 0, - ctype_digit, 0, - ctype_space, 0, - ctype_word, 0, - 1, 1 /* OP_ANY, OP_ALLANY */ -}; - - -/* Structure for holding data about a particular state, which is in effect the -current data for an active path through the match tree. It must consist -entirely of ints because the working vector we are passed, and which we put -these structures in, is a vector of ints. */ - -typedef struct stateblock { - int offset; /* Offset to opcode */ - int count; /* Count for repeats */ - int data; /* Some use extra data */ -} stateblock; - -#define INTS_PER_STATEBLOCK (int)(sizeof(stateblock)/sizeof(int)) - - -#ifdef PCRE_DEBUG -/************************************************* -* Print character string * -*************************************************/ - -/* Character string printing function for debugging. - -Arguments: - p points to string - length number of bytes - f where to print - -Returns: nothing -*/ - -static void -pchars(const pcre_uchar *p, int length, FILE *f) -{ -pcre_uint32 c; -while (length-- > 0) - { - if (isprint(c = *(p++))) - fprintf(f, "%c", c); - else - fprintf(f, "\\x{%02x}", c); - } -} -#endif - - - -/************************************************* -* Execute a Regular Expression - DFA engine * -*************************************************/ - -/* This internal function applies a compiled pattern to a subject string, -starting at a given point, using a DFA engine. This function is called from the -external one, possibly multiple times if the pattern is not anchored. The -function calls itself recursively for some kinds of subpattern. - -Arguments: - md the match_data block with fixed information - this_start_code the opening bracket of this subexpression's code - current_subject where we currently are in the subject string - start_offset start offset in the subject string - offsets vector to contain the matching string offsets - offsetcount size of same - workspace vector of workspace - wscount size of same - rlevel function call recursion level - -Returns: > 0 => number of match offset pairs placed in offsets - = 0 => offsets overflowed; longest matches are present - -1 => failed to match - < -1 => some kind of unexpected problem - -The following macros are used for adding states to the two state vectors (one -for the current character, one for the following character). */ - -#define ADD_ACTIVE(x,y) \ - if (active_count++ < wscount) \ - { \ - next_active_state->offset = (x); \ - next_active_state->count = (y); \ - next_active_state++; \ - DPRINTF(("%.*sADD_ACTIVE(%d,%d)\n", rlevel*2-2, SP, (x), (y))); \ - } \ - else return PCRE_ERROR_DFA_WSSIZE - -#define ADD_ACTIVE_DATA(x,y,z) \ - if (active_count++ < wscount) \ - { \ - next_active_state->offset = (x); \ - next_active_state->count = (y); \ - next_active_state->data = (z); \ - next_active_state++; \ - DPRINTF(("%.*sADD_ACTIVE_DATA(%d,%d,%d)\n", rlevel*2-2, SP, (x), (y), (z))); \ - } \ - else return PCRE_ERROR_DFA_WSSIZE - -#define ADD_NEW(x,y) \ - if (new_count++ < wscount) \ - { \ - next_new_state->offset = (x); \ - next_new_state->count = (y); \ - next_new_state++; \ - DPRINTF(("%.*sADD_NEW(%d,%d)\n", rlevel*2-2, SP, (x), (y))); \ - } \ - else return PCRE_ERROR_DFA_WSSIZE - -#define ADD_NEW_DATA(x,y,z) \ - if (new_count++ < wscount) \ - { \ - next_new_state->offset = (x); \ - next_new_state->count = (y); \ - next_new_state->data = (z); \ - next_new_state++; \ - DPRINTF(("%.*sADD_NEW_DATA(%d,%d,%d) line %d\n", rlevel*2-2, SP, \ - (x), (y), (z), __LINE__)); \ - } \ - else return PCRE_ERROR_DFA_WSSIZE - -/* And now, here is the code */ - -static int -internal_dfa_exec( - dfa_match_data *md, - const pcre_uchar *this_start_code, - const pcre_uchar *current_subject, - int start_offset, - int *offsets, - int offsetcount, - int *workspace, - int wscount, - int rlevel) -{ -stateblock *active_states, *new_states, *temp_states; -stateblock *next_active_state, *next_new_state; - -const pcre_uint8 *ctypes, *lcc, *fcc; -const pcre_uchar *ptr; -const pcre_uchar *end_code, *first_op; - -dfa_recursion_info new_recursive; - -int active_count, new_count, match_count; - -/* Some fields in the md block are frequently referenced, so we load them into -independent variables in the hope that this will perform better. */ - -const pcre_uchar *start_subject = md->start_subject; -const pcre_uchar *end_subject = md->end_subject; -const pcre_uchar *start_code = md->start_code; - -#ifdef SUPPORT_UTF -BOOL utf = (md->poptions & PCRE_UTF8) != 0; -#else -BOOL utf = FALSE; -#endif - -BOOL reset_could_continue = FALSE; - -rlevel++; -offsetcount &= (-2); - -wscount -= 2; -wscount = (wscount - (wscount % (INTS_PER_STATEBLOCK * 2))) / - (2 * INTS_PER_STATEBLOCK); - -DPRINTF(("\n%.*s---------------------\n" - "%.*sCall to internal_dfa_exec f=%d\n", - rlevel*2-2, SP, rlevel*2-2, SP, rlevel)); - -ctypes = md->tables + ctypes_offset; -lcc = md->tables + lcc_offset; -fcc = md->tables + fcc_offset; - -match_count = PCRE_ERROR_NOMATCH; /* A negative number */ - -active_states = (stateblock *)(workspace + 2); -next_new_state = new_states = active_states + wscount; -new_count = 0; - -first_op = this_start_code + 1 + LINK_SIZE + - ((*this_start_code == OP_CBRA || *this_start_code == OP_SCBRA || - *this_start_code == OP_CBRAPOS || *this_start_code == OP_SCBRAPOS) - ? IMM2_SIZE:0); - -/* The first thing in any (sub) pattern is a bracket of some sort. Push all -the alternative states onto the list, and find out where the end is. This -makes is possible to use this function recursively, when we want to stop at a -matching internal ket rather than at the end. - -If the first opcode in the first alternative is OP_REVERSE, we are dealing with -a backward assertion. In that case, we have to find out the maximum amount to -move back, and set up each alternative appropriately. */ - -if (*first_op == OP_REVERSE) - { - int max_back = 0; - int gone_back; - - end_code = this_start_code; - do - { - int back = GET(end_code, 2+LINK_SIZE); - if (back > max_back) max_back = back; - end_code += GET(end_code, 1); - } - while (*end_code == OP_ALT); - - /* If we can't go back the amount required for the longest lookbehind - pattern, go back as far as we can; some alternatives may still be viable. */ - -#ifdef SUPPORT_UTF - /* In character mode we have to step back character by character */ - - if (utf) - { - for (gone_back = 0; gone_back < max_back; gone_back++) - { - if (current_subject <= start_subject) break; - current_subject--; - ACROSSCHAR(current_subject > start_subject, *current_subject, current_subject--); - } - } - else -#endif - - /* In byte-mode we can do this quickly. */ - - { - gone_back = (current_subject - max_back < start_subject)? - (int)(current_subject - start_subject) : max_back; - current_subject -= gone_back; - } - - /* Save the earliest consulted character */ - - if (current_subject < md->start_used_ptr) - md->start_used_ptr = current_subject; - - /* Now we can process the individual branches. */ - - end_code = this_start_code; - do - { - int back = GET(end_code, 2+LINK_SIZE); - if (back <= gone_back) - { - int bstate = (int)(end_code - start_code + 2 + 2*LINK_SIZE); - ADD_NEW_DATA(-bstate, 0, gone_back - back); - } - end_code += GET(end_code, 1); - } - while (*end_code == OP_ALT); - } - -/* This is the code for a "normal" subpattern (not a backward assertion). The -start of a whole pattern is always one of these. If we are at the top level, -we may be asked to restart matching from the same point that we reached for a -previous partial match. We still have to scan through the top-level branches to -find the end state. */ - -else - { - end_code = this_start_code; - - /* Restarting */ - - if (rlevel == 1 && (md->moptions & PCRE_DFA_RESTART) != 0) - { - do { end_code += GET(end_code, 1); } while (*end_code == OP_ALT); - new_count = workspace[1]; - if (!workspace[0]) - memcpy(new_states, active_states, new_count * sizeof(stateblock)); - } - - /* Not restarting */ - - else - { - int length = 1 + LINK_SIZE + - ((*this_start_code == OP_CBRA || *this_start_code == OP_SCBRA || - *this_start_code == OP_CBRAPOS || *this_start_code == OP_SCBRAPOS) - ? IMM2_SIZE:0); - do - { - ADD_NEW((int)(end_code - start_code + length), 0); - end_code += GET(end_code, 1); - length = 1 + LINK_SIZE; - } - while (*end_code == OP_ALT); - } - } - -workspace[0] = 0; /* Bit indicating which vector is current */ - -DPRINTF(("%.*sEnd state = %d\n", rlevel*2-2, SP, (int)(end_code - start_code))); - -/* Loop for scanning the subject */ - -ptr = current_subject; -for (;;) - { - int i, j; - int clen, dlen; - pcre_uint32 c, d; - int forced_fail = 0; - BOOL partial_newline = FALSE; - BOOL could_continue = reset_could_continue; - reset_could_continue = FALSE; - - /* Make the new state list into the active state list and empty the - new state list. */ - - temp_states = active_states; - active_states = new_states; - new_states = temp_states; - active_count = new_count; - new_count = 0; - - workspace[0] ^= 1; /* Remember for the restarting feature */ - workspace[1] = active_count; - -#ifdef PCRE_DEBUG - printf("%.*sNext character: rest of subject = \"", rlevel*2-2, SP); - pchars(ptr, STRLEN_UC(ptr), stdout); - printf("\"\n"); - - printf("%.*sActive states: ", rlevel*2-2, SP); - for (i = 0; i < active_count; i++) - printf("%d/%d ", active_states[i].offset, active_states[i].count); - printf("\n"); -#endif - - /* Set the pointers for adding new states */ - - next_active_state = active_states + active_count; - next_new_state = new_states; - - /* Load the current character from the subject outside the loop, as many - different states may want to look at it, and we assume that at least one - will. */ - - if (ptr < end_subject) - { - clen = 1; /* Number of data items in the character */ -#ifdef SUPPORT_UTF - GETCHARLENTEST(c, ptr, clen); -#else - c = *ptr; -#endif /* SUPPORT_UTF */ - } - else - { - clen = 0; /* This indicates the end of the subject */ - c = NOTACHAR; /* This value should never actually be used */ - } - - /* Scan up the active states and act on each one. The result of an action - may be to add more states to the currently active list (e.g. on hitting a - parenthesis) or it may be to put states on the new list, for considering - when we move the character pointer on. */ - - for (i = 0; i < active_count; i++) - { - stateblock *current_state = active_states + i; - BOOL caseless = FALSE; - const pcre_uchar *code; - int state_offset = current_state->offset; - int codevalue, rrc; - int count; - -#ifdef PCRE_DEBUG - printf ("%.*sProcessing state %d c=", rlevel*2-2, SP, state_offset); - if (clen == 0) printf("EOL\n"); - else if (c > 32 && c < 127) printf("'%c'\n", c); - else printf("0x%02x\n", c); -#endif - - /* A negative offset is a special case meaning "hold off going to this - (negated) state until the number of characters in the data field have - been skipped". If the could_continue flag was passed over from a previous - state, arrange for it to passed on. */ - - if (state_offset < 0) - { - if (current_state->data > 0) - { - DPRINTF(("%.*sSkipping this character\n", rlevel*2-2, SP)); - ADD_NEW_DATA(state_offset, current_state->count, - current_state->data - 1); - if (could_continue) reset_could_continue = TRUE; - continue; - } - else - { - current_state->offset = state_offset = -state_offset; - } - } - - /* Check for a duplicate state with the same count, and skip if found. - See the note at the head of this module about the possibility of improving - performance here. */ - - for (j = 0; j < i; j++) - { - if (active_states[j].offset == state_offset && - active_states[j].count == current_state->count) - { - DPRINTF(("%.*sDuplicate state: skipped\n", rlevel*2-2, SP)); - goto NEXT_ACTIVE_STATE; - } - } - - /* The state offset is the offset to the opcode */ - - code = start_code + state_offset; - codevalue = *code; - - /* If this opcode inspects a character, but we are at the end of the - subject, remember the fact for use when testing for a partial match. */ - - if (clen == 0 && poptable[codevalue] != 0) - could_continue = TRUE; - - /* If this opcode is followed by an inline character, load it. It is - tempting to test for the presence of a subject character here, but that - is wrong, because sometimes zero repetitions of the subject are - permitted. - - We also use this mechanism for opcodes such as OP_TYPEPLUS that take an - argument that is not a data character - but is always one byte long because - the values are small. We have to take special action to deal with \P, \p, - \H, \h, \V, \v and \X in this case. To keep the other cases fast, convert - these ones to new opcodes. */ - - if (coptable[codevalue] > 0) - { - dlen = 1; -#ifdef SUPPORT_UTF - if (utf) { GETCHARLEN(d, (code + coptable[codevalue]), dlen); } else -#endif /* SUPPORT_UTF */ - d = code[coptable[codevalue]]; - if (codevalue >= OP_TYPESTAR) - { - switch(d) - { - case OP_ANYBYTE: return PCRE_ERROR_DFA_UITEM; - case OP_NOTPROP: - case OP_PROP: codevalue += OP_PROP_EXTRA; break; - case OP_ANYNL: codevalue += OP_ANYNL_EXTRA; break; - case OP_EXTUNI: codevalue += OP_EXTUNI_EXTRA; break; - case OP_NOT_HSPACE: - case OP_HSPACE: codevalue += OP_HSPACE_EXTRA; break; - case OP_NOT_VSPACE: - case OP_VSPACE: codevalue += OP_VSPACE_EXTRA; break; - default: break; - } - } - } - else - { - dlen = 0; /* Not strictly necessary, but compilers moan */ - d = NOTACHAR; /* if these variables are not set. */ - } - - - /* Now process the individual opcodes */ - - switch (codevalue) - { -/* ========================================================================== */ - /* These cases are never obeyed. This is a fudge that causes a compile- - time error if the vectors coptable or poptable, which are indexed by - opcode, are not the correct length. It seems to be the only way to do - such a check at compile time, as the sizeof() operator does not work - in the C preprocessor. */ - - case OP_TABLE_LENGTH: - case OP_TABLE_LENGTH + - ((sizeof(coptable) == OP_TABLE_LENGTH) && - (sizeof(poptable) == OP_TABLE_LENGTH)): - break; - -/* ========================================================================== */ - /* Reached a closing bracket. If not at the end of the pattern, carry - on with the next opcode. For repeating opcodes, also add the repeat - state. Note that KETRPOS will always be encountered at the end of the - subpattern, because the possessive subpattern repeats are always handled - using recursive calls. Thus, it never adds any new states. - - At the end of the (sub)pattern, unless we have an empty string and - PCRE_NOTEMPTY is set, or PCRE_NOTEMPTY_ATSTART is set and we are at the - start of the subject, save the match data, shifting up all previous - matches so we always have the longest first. */ - - case OP_KET: - case OP_KETRMIN: - case OP_KETRMAX: - case OP_KETRPOS: - if (code != end_code) - { - ADD_ACTIVE(state_offset + 1 + LINK_SIZE, 0); - if (codevalue != OP_KET) - { - ADD_ACTIVE(state_offset - GET(code, 1), 0); - } - } - else - { - if (ptr > current_subject || - ((md->moptions & PCRE_NOTEMPTY) == 0 && - ((md->moptions & PCRE_NOTEMPTY_ATSTART) == 0 || - current_subject > start_subject + md->start_offset))) - { - if (match_count < 0) match_count = (offsetcount >= 2)? 1 : 0; - else if (match_count > 0 && ++match_count * 2 > offsetcount) - match_count = 0; - count = ((match_count == 0)? offsetcount : match_count * 2) - 2; - if (count > 0) memmove(offsets + 2, offsets, count * sizeof(int)); - if (offsetcount >= 2) - { - offsets[0] = (int)(current_subject - start_subject); - offsets[1] = (int)(ptr - start_subject); - DPRINTF(("%.*sSet matched string = \"%.*s\"\n", rlevel*2-2, SP, - offsets[1] - offsets[0], (char *)current_subject)); - } - if ((md->moptions & PCRE_DFA_SHORTEST) != 0) - { - DPRINTF(("%.*sEnd of internal_dfa_exec %d: returning %d\n" - "%.*s---------------------\n\n", rlevel*2-2, SP, rlevel, - match_count, rlevel*2-2, SP)); - return match_count; - } - } - } - break; - -/* ========================================================================== */ - /* These opcodes add to the current list of states without looking - at the current character. */ - - /*-----------------------------------------------------------------*/ - case OP_ALT: - do { code += GET(code, 1); } while (*code == OP_ALT); - ADD_ACTIVE((int)(code - start_code), 0); - break; - - /*-----------------------------------------------------------------*/ - case OP_BRA: - case OP_SBRA: - do - { - ADD_ACTIVE((int)(code - start_code + 1 + LINK_SIZE), 0); - code += GET(code, 1); - } - while (*code == OP_ALT); - break; - - /*-----------------------------------------------------------------*/ - case OP_CBRA: - case OP_SCBRA: - ADD_ACTIVE((int)(code - start_code + 1 + LINK_SIZE + IMM2_SIZE), 0); - code += GET(code, 1); - while (*code == OP_ALT) - { - ADD_ACTIVE((int)(code - start_code + 1 + LINK_SIZE), 0); - code += GET(code, 1); - } - break; - - /*-----------------------------------------------------------------*/ - case OP_BRAZERO: - case OP_BRAMINZERO: - ADD_ACTIVE(state_offset + 1, 0); - code += 1 + GET(code, 2); - while (*code == OP_ALT) code += GET(code, 1); - ADD_ACTIVE((int)(code - start_code + 1 + LINK_SIZE), 0); - break; - - /*-----------------------------------------------------------------*/ - case OP_SKIPZERO: - code += 1 + GET(code, 2); - while (*code == OP_ALT) code += GET(code, 1); - ADD_ACTIVE((int)(code - start_code + 1 + LINK_SIZE), 0); - break; - - /*-----------------------------------------------------------------*/ - case OP_CIRC: - if (ptr == start_subject && (md->moptions & PCRE_NOTBOL) == 0) - { ADD_ACTIVE(state_offset + 1, 0); } - break; - - /*-----------------------------------------------------------------*/ - case OP_CIRCM: - if ((ptr == start_subject && (md->moptions & PCRE_NOTBOL) == 0) || - (ptr != end_subject && WAS_NEWLINE(ptr))) - { ADD_ACTIVE(state_offset + 1, 0); } - break; - - /*-----------------------------------------------------------------*/ - case OP_EOD: - if (ptr >= end_subject) - { - if ((md->moptions & PCRE_PARTIAL_HARD) != 0) - could_continue = TRUE; - else { ADD_ACTIVE(state_offset + 1, 0); } - } - break; - - /*-----------------------------------------------------------------*/ - case OP_SOD: - if (ptr == start_subject) { ADD_ACTIVE(state_offset + 1, 0); } - break; - - /*-----------------------------------------------------------------*/ - case OP_SOM: - if (ptr == start_subject + start_offset) { ADD_ACTIVE(state_offset + 1, 0); } - break; - - -/* ========================================================================== */ - /* These opcodes inspect the next subject character, and sometimes - the previous one as well, but do not have an argument. The variable - clen contains the length of the current character and is zero if we are - at the end of the subject. */ - - /*-----------------------------------------------------------------*/ - case OP_ANY: - if (clen > 0 && !IS_NEWLINE(ptr)) - { - if (ptr + 1 >= md->end_subject && - (md->moptions & (PCRE_PARTIAL_HARD)) != 0 && - NLBLOCK->nltype == NLTYPE_FIXED && - NLBLOCK->nllen == 2 && - c == NLBLOCK->nl[0]) - { - could_continue = partial_newline = TRUE; - } - else - { - ADD_NEW(state_offset + 1, 0); - } - } - break; - - /*-----------------------------------------------------------------*/ - case OP_ALLANY: - if (clen > 0) - { ADD_NEW(state_offset + 1, 0); } - break; - - /*-----------------------------------------------------------------*/ - case OP_EODN: - if (clen == 0 && (md->moptions & PCRE_PARTIAL_HARD) != 0) - could_continue = TRUE; - else if (clen == 0 || (IS_NEWLINE(ptr) && ptr == end_subject - md->nllen)) - { ADD_ACTIVE(state_offset + 1, 0); } - break; - - /*-----------------------------------------------------------------*/ - case OP_DOLL: - if ((md->moptions & PCRE_NOTEOL) == 0) - { - if (clen == 0 && (md->moptions & PCRE_PARTIAL_HARD) != 0) - could_continue = TRUE; - else if (clen == 0 || - ((md->poptions & PCRE_DOLLAR_ENDONLY) == 0 && IS_NEWLINE(ptr) && - (ptr == end_subject - md->nllen) - )) - { ADD_ACTIVE(state_offset + 1, 0); } - else if (ptr + 1 >= md->end_subject && - (md->moptions & (PCRE_PARTIAL_HARD|PCRE_PARTIAL_SOFT)) != 0 && - NLBLOCK->nltype == NLTYPE_FIXED && - NLBLOCK->nllen == 2 && - c == NLBLOCK->nl[0]) - { - if ((md->moptions & PCRE_PARTIAL_HARD) != 0) - { - reset_could_continue = TRUE; - ADD_NEW_DATA(-(state_offset + 1), 0, 1); - } - else could_continue = partial_newline = TRUE; - } - } - break; - - /*-----------------------------------------------------------------*/ - case OP_DOLLM: - if ((md->moptions & PCRE_NOTEOL) == 0) - { - if (clen == 0 && (md->moptions & PCRE_PARTIAL_HARD) != 0) - could_continue = TRUE; - else if (clen == 0 || - ((md->poptions & PCRE_DOLLAR_ENDONLY) == 0 && IS_NEWLINE(ptr))) - { ADD_ACTIVE(state_offset + 1, 0); } - else if (ptr + 1 >= md->end_subject && - (md->moptions & (PCRE_PARTIAL_HARD|PCRE_PARTIAL_SOFT)) != 0 && - NLBLOCK->nltype == NLTYPE_FIXED && - NLBLOCK->nllen == 2 && - c == NLBLOCK->nl[0]) - { - if ((md->moptions & PCRE_PARTIAL_HARD) != 0) - { - reset_could_continue = TRUE; - ADD_NEW_DATA(-(state_offset + 1), 0, 1); - } - else could_continue = partial_newline = TRUE; - } - } - else if (IS_NEWLINE(ptr)) - { ADD_ACTIVE(state_offset + 1, 0); } - break; - - /*-----------------------------------------------------------------*/ - - case OP_DIGIT: - case OP_WHITESPACE: - case OP_WORDCHAR: - if (clen > 0 && c < 256 && - ((ctypes[c] & toptable1[codevalue]) ^ toptable2[codevalue]) != 0) - { ADD_NEW(state_offset + 1, 0); } - break; - - /*-----------------------------------------------------------------*/ - case OP_NOT_DIGIT: - case OP_NOT_WHITESPACE: - case OP_NOT_WORDCHAR: - if (clen > 0 && (c >= 256 || - ((ctypes[c] & toptable1[codevalue]) ^ toptable2[codevalue]) != 0)) - { ADD_NEW(state_offset + 1, 0); } - break; - - /*-----------------------------------------------------------------*/ - case OP_WORD_BOUNDARY: - case OP_NOT_WORD_BOUNDARY: - { - int left_word, right_word; - - if (ptr > start_subject) - { - const pcre_uchar *temp = ptr - 1; - if (temp < md->start_used_ptr) md->start_used_ptr = temp; -#if defined SUPPORT_UTF && !defined COMPILE_PCRE32 - if (utf) { BACKCHAR(temp); } -#endif - GETCHARTEST(d, temp); -#ifdef SUPPORT_UCP - if ((md->poptions & PCRE_UCP) != 0) - { - if (d == '_') left_word = TRUE; else - { - int cat = UCD_CATEGORY(d); - left_word = (cat == ucp_L || cat == ucp_N); - } - } - else -#endif - left_word = d < 256 && (ctypes[d] & ctype_word) != 0; - } - else left_word = FALSE; - - if (clen > 0) - { -#ifdef SUPPORT_UCP - if ((md->poptions & PCRE_UCP) != 0) - { - if (c == '_') right_word = TRUE; else - { - int cat = UCD_CATEGORY(c); - right_word = (cat == ucp_L || cat == ucp_N); - } - } - else -#endif - right_word = c < 256 && (ctypes[c] & ctype_word) != 0; - } - else right_word = FALSE; - - if ((left_word == right_word) == (codevalue == OP_NOT_WORD_BOUNDARY)) - { ADD_ACTIVE(state_offset + 1, 0); } - } - break; - - - /*-----------------------------------------------------------------*/ - /* Check the next character by Unicode property. We will get here only - if the support is in the binary; otherwise a compile-time error occurs. - */ - -#ifdef SUPPORT_UCP - case OP_PROP: - case OP_NOTPROP: - if (clen > 0) - { - BOOL OK; - const pcre_uint32 *cp; - const ucd_record * prop = GET_UCD(c); - switch(code[1]) - { - case PT_ANY: - OK = TRUE; - break; - - case PT_LAMP: - OK = prop->chartype == ucp_Lu || prop->chartype == ucp_Ll || - prop->chartype == ucp_Lt; - break; - - case PT_GC: - OK = PRIV(ucp_gentype)[prop->chartype] == code[2]; - break; - - case PT_PC: - OK = prop->chartype == code[2]; - break; - - case PT_SC: - OK = prop->script == code[2]; - break; - - /* These are specials for combination cases. */ - - case PT_ALNUM: - OK = PRIV(ucp_gentype)[prop->chartype] == ucp_L || - PRIV(ucp_gentype)[prop->chartype] == ucp_N; - break; - - /* Perl space used to exclude VT, but from Perl 5.18 it is included, - which means that Perl space and POSIX space are now identical. PCRE - was changed at release 8.34. */ - - case PT_SPACE: /* Perl space */ - case PT_PXSPACE: /* POSIX space */ - switch(c) - { - HSPACE_CASES: - VSPACE_CASES: - OK = TRUE; - break; - - default: - OK = PRIV(ucp_gentype)[prop->chartype] == ucp_Z; - break; - } - break; - - case PT_WORD: - OK = PRIV(ucp_gentype)[prop->chartype] == ucp_L || - PRIV(ucp_gentype)[prop->chartype] == ucp_N || - c == CHAR_UNDERSCORE; - break; - - case PT_CLIST: - cp = PRIV(ucd_caseless_sets) + code[2]; - for (;;) - { - if (c < *cp) { OK = FALSE; break; } - if (c == *cp++) { OK = TRUE; break; } - } - break; - - case PT_UCNC: - OK = c == CHAR_DOLLAR_SIGN || c == CHAR_COMMERCIAL_AT || - c == CHAR_GRAVE_ACCENT || (c >= 0xa0 && c <= 0xd7ff) || - c >= 0xe000; - break; - - /* Should never occur, but keep compilers from grumbling. */ - - default: - OK = codevalue != OP_PROP; - break; - } - - if (OK == (codevalue == OP_PROP)) { ADD_NEW(state_offset + 3, 0); } - } - break; -#endif - - - -/* ========================================================================== */ - /* These opcodes likewise inspect the subject character, but have an - argument that is not a data character. It is one of these opcodes: - OP_ANY, OP_ALLANY, OP_DIGIT, OP_NOT_DIGIT, OP_WHITESPACE, OP_NOT_SPACE, - OP_WORDCHAR, OP_NOT_WORDCHAR. The value is loaded into d. */ - - case OP_TYPEPLUS: - case OP_TYPEMINPLUS: - case OP_TYPEPOSPLUS: - count = current_state->count; /* Already matched */ - if (count > 0) { ADD_ACTIVE(state_offset + 2, 0); } - if (clen > 0) - { - if (d == OP_ANY && ptr + 1 >= md->end_subject && - (md->moptions & (PCRE_PARTIAL_HARD)) != 0 && - NLBLOCK->nltype == NLTYPE_FIXED && - NLBLOCK->nllen == 2 && - c == NLBLOCK->nl[0]) - { - could_continue = partial_newline = TRUE; - } - else if ((c >= 256 && d != OP_DIGIT && d != OP_WHITESPACE && d != OP_WORDCHAR) || - (c < 256 && - (d != OP_ANY || !IS_NEWLINE(ptr)) && - ((ctypes[c] & toptable1[d]) ^ toptable2[d]) != 0)) - { - if (count > 0 && codevalue == OP_TYPEPOSPLUS) - { - active_count--; /* Remove non-match possibility */ - next_active_state--; - } - count++; - ADD_NEW(state_offset, count); - } - } - break; - - /*-----------------------------------------------------------------*/ - case OP_TYPEQUERY: - case OP_TYPEMINQUERY: - case OP_TYPEPOSQUERY: - ADD_ACTIVE(state_offset + 2, 0); - if (clen > 0) - { - if (d == OP_ANY && ptr + 1 >= md->end_subject && - (md->moptions & (PCRE_PARTIAL_HARD)) != 0 && - NLBLOCK->nltype == NLTYPE_FIXED && - NLBLOCK->nllen == 2 && - c == NLBLOCK->nl[0]) - { - could_continue = partial_newline = TRUE; - } - else if ((c >= 256 && d != OP_DIGIT && d != OP_WHITESPACE && d != OP_WORDCHAR) || - (c < 256 && - (d != OP_ANY || !IS_NEWLINE(ptr)) && - ((ctypes[c] & toptable1[d]) ^ toptable2[d]) != 0)) - { - if (codevalue == OP_TYPEPOSQUERY) - { - active_count--; /* Remove non-match possibility */ - next_active_state--; - } - ADD_NEW(state_offset + 2, 0); - } - } - break; - - /*-----------------------------------------------------------------*/ - case OP_TYPESTAR: - case OP_TYPEMINSTAR: - case OP_TYPEPOSSTAR: - ADD_ACTIVE(state_offset + 2, 0); - if (clen > 0) - { - if (d == OP_ANY && ptr + 1 >= md->end_subject && - (md->moptions & (PCRE_PARTIAL_HARD)) != 0 && - NLBLOCK->nltype == NLTYPE_FIXED && - NLBLOCK->nllen == 2 && - c == NLBLOCK->nl[0]) - { - could_continue = partial_newline = TRUE; - } - else if ((c >= 256 && d != OP_DIGIT && d != OP_WHITESPACE && d != OP_WORDCHAR) || - (c < 256 && - (d != OP_ANY || !IS_NEWLINE(ptr)) && - ((ctypes[c] & toptable1[d]) ^ toptable2[d]) != 0)) - { - if (codevalue == OP_TYPEPOSSTAR) - { - active_count--; /* Remove non-match possibility */ - next_active_state--; - } - ADD_NEW(state_offset, 0); - } - } - break; - - /*-----------------------------------------------------------------*/ - case OP_TYPEEXACT: - count = current_state->count; /* Number already matched */ - if (clen > 0) - { - if (d == OP_ANY && ptr + 1 >= md->end_subject && - (md->moptions & (PCRE_PARTIAL_HARD)) != 0 && - NLBLOCK->nltype == NLTYPE_FIXED && - NLBLOCK->nllen == 2 && - c == NLBLOCK->nl[0]) - { - could_continue = partial_newline = TRUE; - } - else if ((c >= 256 && d != OP_DIGIT && d != OP_WHITESPACE && d != OP_WORDCHAR) || - (c < 256 && - (d != OP_ANY || !IS_NEWLINE(ptr)) && - ((ctypes[c] & toptable1[d]) ^ toptable2[d]) != 0)) - { - if (++count >= (int)GET2(code, 1)) - { ADD_NEW(state_offset + 1 + IMM2_SIZE + 1, 0); } - else - { ADD_NEW(state_offset, count); } - } - } - break; - - /*-----------------------------------------------------------------*/ - case OP_TYPEUPTO: - case OP_TYPEMINUPTO: - case OP_TYPEPOSUPTO: - ADD_ACTIVE(state_offset + 2 + IMM2_SIZE, 0); - count = current_state->count; /* Number already matched */ - if (clen > 0) - { - if (d == OP_ANY && ptr + 1 >= md->end_subject && - (md->moptions & (PCRE_PARTIAL_HARD)) != 0 && - NLBLOCK->nltype == NLTYPE_FIXED && - NLBLOCK->nllen == 2 && - c == NLBLOCK->nl[0]) - { - could_continue = partial_newline = TRUE; - } - else if ((c >= 256 && d != OP_DIGIT && d != OP_WHITESPACE && d != OP_WORDCHAR) || - (c < 256 && - (d != OP_ANY || !IS_NEWLINE(ptr)) && - ((ctypes[c] & toptable1[d]) ^ toptable2[d]) != 0)) - { - if (codevalue == OP_TYPEPOSUPTO) - { - active_count--; /* Remove non-match possibility */ - next_active_state--; - } - if (++count >= (int)GET2(code, 1)) - { ADD_NEW(state_offset + 2 + IMM2_SIZE, 0); } - else - { ADD_NEW(state_offset, count); } - } - } - break; - -/* ========================================================================== */ - /* These are virtual opcodes that are used when something like - OP_TYPEPLUS has OP_PROP, OP_NOTPROP, OP_ANYNL, or OP_EXTUNI as its - argument. It keeps the code above fast for the other cases. The argument - is in the d variable. */ - -#ifdef SUPPORT_UCP - case OP_PROP_EXTRA + OP_TYPEPLUS: - case OP_PROP_EXTRA + OP_TYPEMINPLUS: - case OP_PROP_EXTRA + OP_TYPEPOSPLUS: - count = current_state->count; /* Already matched */ - if (count > 0) { ADD_ACTIVE(state_offset + 4, 0); } - if (clen > 0) - { - BOOL OK; - const pcre_uint32 *cp; - const ucd_record * prop = GET_UCD(c); - switch(code[2]) - { - case PT_ANY: - OK = TRUE; - break; - - case PT_LAMP: - OK = prop->chartype == ucp_Lu || prop->chartype == ucp_Ll || - prop->chartype == ucp_Lt; - break; - - case PT_GC: - OK = PRIV(ucp_gentype)[prop->chartype] == code[3]; - break; - - case PT_PC: - OK = prop->chartype == code[3]; - break; - - case PT_SC: - OK = prop->script == code[3]; - break; - - /* These are specials for combination cases. */ - - case PT_ALNUM: - OK = PRIV(ucp_gentype)[prop->chartype] == ucp_L || - PRIV(ucp_gentype)[prop->chartype] == ucp_N; - break; - - /* Perl space used to exclude VT, but from Perl 5.18 it is included, - which means that Perl space and POSIX space are now identical. PCRE - was changed at release 8.34. */ - - case PT_SPACE: /* Perl space */ - case PT_PXSPACE: /* POSIX space */ - switch(c) - { - HSPACE_CASES: - VSPACE_CASES: - OK = TRUE; - break; - - default: - OK = PRIV(ucp_gentype)[prop->chartype] == ucp_Z; - break; - } - break; - - case PT_WORD: - OK = PRIV(ucp_gentype)[prop->chartype] == ucp_L || - PRIV(ucp_gentype)[prop->chartype] == ucp_N || - c == CHAR_UNDERSCORE; - break; - - case PT_CLIST: - cp = PRIV(ucd_caseless_sets) + code[3]; - for (;;) - { - if (c < *cp) { OK = FALSE; break; } - if (c == *cp++) { OK = TRUE; break; } - } - break; - - case PT_UCNC: - OK = c == CHAR_DOLLAR_SIGN || c == CHAR_COMMERCIAL_AT || - c == CHAR_GRAVE_ACCENT || (c >= 0xa0 && c <= 0xd7ff) || - c >= 0xe000; - break; - - /* Should never occur, but keep compilers from grumbling. */ - - default: - OK = codevalue != OP_PROP; - break; - } - - if (OK == (d == OP_PROP)) - { - if (count > 0 && codevalue == OP_PROP_EXTRA + OP_TYPEPOSPLUS) - { - active_count--; /* Remove non-match possibility */ - next_active_state--; - } - count++; - ADD_NEW(state_offset, count); - } - } - break; - - /*-----------------------------------------------------------------*/ - case OP_EXTUNI_EXTRA + OP_TYPEPLUS: - case OP_EXTUNI_EXTRA + OP_TYPEMINPLUS: - case OP_EXTUNI_EXTRA + OP_TYPEPOSPLUS: - count = current_state->count; /* Already matched */ - if (count > 0) { ADD_ACTIVE(state_offset + 2, 0); } - if (clen > 0) - { - int lgb, rgb; - const pcre_uchar *nptr = ptr + clen; - int ncount = 0; - if (count > 0 && codevalue == OP_EXTUNI_EXTRA + OP_TYPEPOSPLUS) - { - active_count--; /* Remove non-match possibility */ - next_active_state--; - } - lgb = UCD_GRAPHBREAK(c); - while (nptr < end_subject) - { - dlen = 1; - if (!utf) d = *nptr; else { GETCHARLEN(d, nptr, dlen); } - rgb = UCD_GRAPHBREAK(d); - if ((PRIV(ucp_gbtable)[lgb] & (1 << rgb)) == 0) break; - ncount++; - lgb = rgb; - nptr += dlen; - } - count++; - ADD_NEW_DATA(-state_offset, count, ncount); - } - break; -#endif - - /*-----------------------------------------------------------------*/ - case OP_ANYNL_EXTRA + OP_TYPEPLUS: - case OP_ANYNL_EXTRA + OP_TYPEMINPLUS: - case OP_ANYNL_EXTRA + OP_TYPEPOSPLUS: - count = current_state->count; /* Already matched */ - if (count > 0) { ADD_ACTIVE(state_offset + 2, 0); } - if (clen > 0) - { - int ncount = 0; - switch (c) - { - case CHAR_VT: - case CHAR_FF: - case CHAR_NEL: -#ifndef EBCDIC - case 0x2028: - case 0x2029: -#endif /* Not EBCDIC */ - if ((md->moptions & PCRE_BSR_ANYCRLF) != 0) break; - goto ANYNL01; - - case CHAR_CR: - if (ptr + 1 < end_subject && UCHAR21TEST(ptr + 1) == CHAR_LF) ncount = 1; - /* Fall through */ - - ANYNL01: - case CHAR_LF: - if (count > 0 && codevalue == OP_ANYNL_EXTRA + OP_TYPEPOSPLUS) - { - active_count--; /* Remove non-match possibility */ - next_active_state--; - } - count++; - ADD_NEW_DATA(-state_offset, count, ncount); - break; - - default: - break; - } - } - break; - - /*-----------------------------------------------------------------*/ - case OP_VSPACE_EXTRA + OP_TYPEPLUS: - case OP_VSPACE_EXTRA + OP_TYPEMINPLUS: - case OP_VSPACE_EXTRA + OP_TYPEPOSPLUS: - count = current_state->count; /* Already matched */ - if (count > 0) { ADD_ACTIVE(state_offset + 2, 0); } - if (clen > 0) - { - BOOL OK; - switch (c) - { - VSPACE_CASES: - OK = TRUE; - break; - - default: - OK = FALSE; - break; - } - - if (OK == (d == OP_VSPACE)) - { - if (count > 0 && codevalue == OP_VSPACE_EXTRA + OP_TYPEPOSPLUS) - { - active_count--; /* Remove non-match possibility */ - next_active_state--; - } - count++; - ADD_NEW_DATA(-state_offset, count, 0); - } - } - break; - - /*-----------------------------------------------------------------*/ - case OP_HSPACE_EXTRA + OP_TYPEPLUS: - case OP_HSPACE_EXTRA + OP_TYPEMINPLUS: - case OP_HSPACE_EXTRA + OP_TYPEPOSPLUS: - count = current_state->count; /* Already matched */ - if (count > 0) { ADD_ACTIVE(state_offset + 2, 0); } - if (clen > 0) - { - BOOL OK; - switch (c) - { - HSPACE_CASES: - OK = TRUE; - break; - - default: - OK = FALSE; - break; - } - - if (OK == (d == OP_HSPACE)) - { - if (count > 0 && codevalue == OP_HSPACE_EXTRA + OP_TYPEPOSPLUS) - { - active_count--; /* Remove non-match possibility */ - next_active_state--; - } - count++; - ADD_NEW_DATA(-state_offset, count, 0); - } - } - break; - - /*-----------------------------------------------------------------*/ -#ifdef SUPPORT_UCP - case OP_PROP_EXTRA + OP_TYPEQUERY: - case OP_PROP_EXTRA + OP_TYPEMINQUERY: - case OP_PROP_EXTRA + OP_TYPEPOSQUERY: - count = 4; - goto QS1; - - case OP_PROP_EXTRA + OP_TYPESTAR: - case OP_PROP_EXTRA + OP_TYPEMINSTAR: - case OP_PROP_EXTRA + OP_TYPEPOSSTAR: - count = 0; - - QS1: - - ADD_ACTIVE(state_offset + 4, 0); - if (clen > 0) - { - BOOL OK; - const pcre_uint32 *cp; - const ucd_record * prop = GET_UCD(c); - switch(code[2]) - { - case PT_ANY: - OK = TRUE; - break; - - case PT_LAMP: - OK = prop->chartype == ucp_Lu || prop->chartype == ucp_Ll || - prop->chartype == ucp_Lt; - break; - - case PT_GC: - OK = PRIV(ucp_gentype)[prop->chartype] == code[3]; - break; - - case PT_PC: - OK = prop->chartype == code[3]; - break; - - case PT_SC: - OK = prop->script == code[3]; - break; - - /* These are specials for combination cases. */ - - case PT_ALNUM: - OK = PRIV(ucp_gentype)[prop->chartype] == ucp_L || - PRIV(ucp_gentype)[prop->chartype] == ucp_N; - break; - - /* Perl space used to exclude VT, but from Perl 5.18 it is included, - which means that Perl space and POSIX space are now identical. PCRE - was changed at release 8.34. */ - - case PT_SPACE: /* Perl space */ - case PT_PXSPACE: /* POSIX space */ - switch(c) - { - HSPACE_CASES: - VSPACE_CASES: - OK = TRUE; - break; - - default: - OK = PRIV(ucp_gentype)[prop->chartype] == ucp_Z; - break; - } - break; - - case PT_WORD: - OK = PRIV(ucp_gentype)[prop->chartype] == ucp_L || - PRIV(ucp_gentype)[prop->chartype] == ucp_N || - c == CHAR_UNDERSCORE; - break; - - case PT_CLIST: - cp = PRIV(ucd_caseless_sets) + code[3]; - for (;;) - { - if (c < *cp) { OK = FALSE; break; } - if (c == *cp++) { OK = TRUE; break; } - } - break; - - case PT_UCNC: - OK = c == CHAR_DOLLAR_SIGN || c == CHAR_COMMERCIAL_AT || - c == CHAR_GRAVE_ACCENT || (c >= 0xa0 && c <= 0xd7ff) || - c >= 0xe000; - break; - - /* Should never occur, but keep compilers from grumbling. */ - - default: - OK = codevalue != OP_PROP; - break; - } - - if (OK == (d == OP_PROP)) - { - if (codevalue == OP_PROP_EXTRA + OP_TYPEPOSSTAR || - codevalue == OP_PROP_EXTRA + OP_TYPEPOSQUERY) - { - active_count--; /* Remove non-match possibility */ - next_active_state--; - } - ADD_NEW(state_offset + count, 0); - } - } - break; - - /*-----------------------------------------------------------------*/ - case OP_EXTUNI_EXTRA + OP_TYPEQUERY: - case OP_EXTUNI_EXTRA + OP_TYPEMINQUERY: - case OP_EXTUNI_EXTRA + OP_TYPEPOSQUERY: - count = 2; - goto QS2; - - case OP_EXTUNI_EXTRA + OP_TYPESTAR: - case OP_EXTUNI_EXTRA + OP_TYPEMINSTAR: - case OP_EXTUNI_EXTRA + OP_TYPEPOSSTAR: - count = 0; - - QS2: - - ADD_ACTIVE(state_offset + 2, 0); - if (clen > 0) - { - int lgb, rgb; - const pcre_uchar *nptr = ptr + clen; - int ncount = 0; - if (codevalue == OP_EXTUNI_EXTRA + OP_TYPEPOSSTAR || - codevalue == OP_EXTUNI_EXTRA + OP_TYPEPOSQUERY) - { - active_count--; /* Remove non-match possibility */ - next_active_state--; - } - lgb = UCD_GRAPHBREAK(c); - while (nptr < end_subject) - { - dlen = 1; - if (!utf) d = *nptr; else { GETCHARLEN(d, nptr, dlen); } - rgb = UCD_GRAPHBREAK(d); - if ((PRIV(ucp_gbtable)[lgb] & (1 << rgb)) == 0) break; - ncount++; - lgb = rgb; - nptr += dlen; - } - ADD_NEW_DATA(-(state_offset + count), 0, ncount); - } - break; -#endif - - /*-----------------------------------------------------------------*/ - case OP_ANYNL_EXTRA + OP_TYPEQUERY: - case OP_ANYNL_EXTRA + OP_TYPEMINQUERY: - case OP_ANYNL_EXTRA + OP_TYPEPOSQUERY: - count = 2; - goto QS3; - - case OP_ANYNL_EXTRA + OP_TYPESTAR: - case OP_ANYNL_EXTRA + OP_TYPEMINSTAR: - case OP_ANYNL_EXTRA + OP_TYPEPOSSTAR: - count = 0; - - QS3: - ADD_ACTIVE(state_offset + 2, 0); - if (clen > 0) - { - int ncount = 0; - switch (c) - { - case CHAR_VT: - case CHAR_FF: - case CHAR_NEL: -#ifndef EBCDIC - case 0x2028: - case 0x2029: -#endif /* Not EBCDIC */ - if ((md->moptions & PCRE_BSR_ANYCRLF) != 0) break; - goto ANYNL02; - - case CHAR_CR: - if (ptr + 1 < end_subject && UCHAR21TEST(ptr + 1) == CHAR_LF) ncount = 1; - /* Fall through */ - - ANYNL02: - case CHAR_LF: - if (codevalue == OP_ANYNL_EXTRA + OP_TYPEPOSSTAR || - codevalue == OP_ANYNL_EXTRA + OP_TYPEPOSQUERY) - { - active_count--; /* Remove non-match possibility */ - next_active_state--; - } - ADD_NEW_DATA(-(state_offset + (int)count), 0, ncount); - break; - - default: - break; - } - } - break; - - /*-----------------------------------------------------------------*/ - case OP_VSPACE_EXTRA + OP_TYPEQUERY: - case OP_VSPACE_EXTRA + OP_TYPEMINQUERY: - case OP_VSPACE_EXTRA + OP_TYPEPOSQUERY: - count = 2; - goto QS4; - - case OP_VSPACE_EXTRA + OP_TYPESTAR: - case OP_VSPACE_EXTRA + OP_TYPEMINSTAR: - case OP_VSPACE_EXTRA + OP_TYPEPOSSTAR: - count = 0; - - QS4: - ADD_ACTIVE(state_offset + 2, 0); - if (clen > 0) - { - BOOL OK; - switch (c) - { - VSPACE_CASES: - OK = TRUE; - break; - - default: - OK = FALSE; - break; - } - if (OK == (d == OP_VSPACE)) - { - if (codevalue == OP_VSPACE_EXTRA + OP_TYPEPOSSTAR || - codevalue == OP_VSPACE_EXTRA + OP_TYPEPOSQUERY) - { - active_count--; /* Remove non-match possibility */ - next_active_state--; - } - ADD_NEW_DATA(-(state_offset + (int)count), 0, 0); - } - } - break; - - /*-----------------------------------------------------------------*/ - case OP_HSPACE_EXTRA + OP_TYPEQUERY: - case OP_HSPACE_EXTRA + OP_TYPEMINQUERY: - case OP_HSPACE_EXTRA + OP_TYPEPOSQUERY: - count = 2; - goto QS5; - - case OP_HSPACE_EXTRA + OP_TYPESTAR: - case OP_HSPACE_EXTRA + OP_TYPEMINSTAR: - case OP_HSPACE_EXTRA + OP_TYPEPOSSTAR: - count = 0; - - QS5: - ADD_ACTIVE(state_offset + 2, 0); - if (clen > 0) - { - BOOL OK; - switch (c) - { - HSPACE_CASES: - OK = TRUE; - break; - - default: - OK = FALSE; - break; - } - - if (OK == (d == OP_HSPACE)) - { - if (codevalue == OP_HSPACE_EXTRA + OP_TYPEPOSSTAR || - codevalue == OP_HSPACE_EXTRA + OP_TYPEPOSQUERY) - { - active_count--; /* Remove non-match possibility */ - next_active_state--; - } - ADD_NEW_DATA(-(state_offset + (int)count), 0, 0); - } - } - break; - - /*-----------------------------------------------------------------*/ -#ifdef SUPPORT_UCP - case OP_PROP_EXTRA + OP_TYPEEXACT: - case OP_PROP_EXTRA + OP_TYPEUPTO: - case OP_PROP_EXTRA + OP_TYPEMINUPTO: - case OP_PROP_EXTRA + OP_TYPEPOSUPTO: - if (codevalue != OP_PROP_EXTRA + OP_TYPEEXACT) - { ADD_ACTIVE(state_offset + 1 + IMM2_SIZE + 3, 0); } - count = current_state->count; /* Number already matched */ - if (clen > 0) - { - BOOL OK; - const pcre_uint32 *cp; - const ucd_record * prop = GET_UCD(c); - switch(code[1 + IMM2_SIZE + 1]) - { - case PT_ANY: - OK = TRUE; - break; - - case PT_LAMP: - OK = prop->chartype == ucp_Lu || prop->chartype == ucp_Ll || - prop->chartype == ucp_Lt; - break; - - case PT_GC: - OK = PRIV(ucp_gentype)[prop->chartype] == code[1 + IMM2_SIZE + 2]; - break; - - case PT_PC: - OK = prop->chartype == code[1 + IMM2_SIZE + 2]; - break; - - case PT_SC: - OK = prop->script == code[1 + IMM2_SIZE + 2]; - break; - - /* These are specials for combination cases. */ - - case PT_ALNUM: - OK = PRIV(ucp_gentype)[prop->chartype] == ucp_L || - PRIV(ucp_gentype)[prop->chartype] == ucp_N; - break; - - /* Perl space used to exclude VT, but from Perl 5.18 it is included, - which means that Perl space and POSIX space are now identical. PCRE - was changed at release 8.34. */ - - case PT_SPACE: /* Perl space */ - case PT_PXSPACE: /* POSIX space */ - switch(c) - { - HSPACE_CASES: - VSPACE_CASES: - OK = TRUE; - break; - - default: - OK = PRIV(ucp_gentype)[prop->chartype] == ucp_Z; - break; - } - break; - - case PT_WORD: - OK = PRIV(ucp_gentype)[prop->chartype] == ucp_L || - PRIV(ucp_gentype)[prop->chartype] == ucp_N || - c == CHAR_UNDERSCORE; - break; - - case PT_CLIST: - cp = PRIV(ucd_caseless_sets) + code[1 + IMM2_SIZE + 2]; - for (;;) - { - if (c < *cp) { OK = FALSE; break; } - if (c == *cp++) { OK = TRUE; break; } - } - break; - - case PT_UCNC: - OK = c == CHAR_DOLLAR_SIGN || c == CHAR_COMMERCIAL_AT || - c == CHAR_GRAVE_ACCENT || (c >= 0xa0 && c <= 0xd7ff) || - c >= 0xe000; - break; - - /* Should never occur, but keep compilers from grumbling. */ - - default: - OK = codevalue != OP_PROP; - break; - } - - if (OK == (d == OP_PROP)) - { - if (codevalue == OP_PROP_EXTRA + OP_TYPEPOSUPTO) - { - active_count--; /* Remove non-match possibility */ - next_active_state--; - } - if (++count >= (int)GET2(code, 1)) - { ADD_NEW(state_offset + 1 + IMM2_SIZE + 3, 0); } - else - { ADD_NEW(state_offset, count); } - } - } - break; - - /*-----------------------------------------------------------------*/ - case OP_EXTUNI_EXTRA + OP_TYPEEXACT: - case OP_EXTUNI_EXTRA + OP_TYPEUPTO: - case OP_EXTUNI_EXTRA + OP_TYPEMINUPTO: - case OP_EXTUNI_EXTRA + OP_TYPEPOSUPTO: - if (codevalue != OP_EXTUNI_EXTRA + OP_TYPEEXACT) - { ADD_ACTIVE(state_offset + 2 + IMM2_SIZE, 0); } - count = current_state->count; /* Number already matched */ - if (clen > 0) - { - int lgb, rgb; - const pcre_uchar *nptr = ptr + clen; - int ncount = 0; - if (codevalue == OP_EXTUNI_EXTRA + OP_TYPEPOSUPTO) - { - active_count--; /* Remove non-match possibility */ - next_active_state--; - } - lgb = UCD_GRAPHBREAK(c); - while (nptr < end_subject) - { - dlen = 1; - if (!utf) d = *nptr; else { GETCHARLEN(d, nptr, dlen); } - rgb = UCD_GRAPHBREAK(d); - if ((PRIV(ucp_gbtable)[lgb] & (1 << rgb)) == 0) break; - ncount++; - lgb = rgb; - nptr += dlen; - } - if (nptr >= end_subject && (md->moptions & PCRE_PARTIAL_HARD) != 0) - reset_could_continue = TRUE; - if (++count >= (int)GET2(code, 1)) - { ADD_NEW_DATA(-(state_offset + 2 + IMM2_SIZE), 0, ncount); } - else - { ADD_NEW_DATA(-state_offset, count, ncount); } - } - break; -#endif - - /*-----------------------------------------------------------------*/ - case OP_ANYNL_EXTRA + OP_TYPEEXACT: - case OP_ANYNL_EXTRA + OP_TYPEUPTO: - case OP_ANYNL_EXTRA + OP_TYPEMINUPTO: - case OP_ANYNL_EXTRA + OP_TYPEPOSUPTO: - if (codevalue != OP_ANYNL_EXTRA + OP_TYPEEXACT) - { ADD_ACTIVE(state_offset + 2 + IMM2_SIZE, 0); } - count = current_state->count; /* Number already matched */ - if (clen > 0) - { - int ncount = 0; - switch (c) - { - case CHAR_VT: - case CHAR_FF: - case CHAR_NEL: -#ifndef EBCDIC - case 0x2028: - case 0x2029: -#endif /* Not EBCDIC */ - if ((md->moptions & PCRE_BSR_ANYCRLF) != 0) break; - goto ANYNL03; - - case CHAR_CR: - if (ptr + 1 < end_subject && UCHAR21TEST(ptr + 1) == CHAR_LF) ncount = 1; - /* Fall through */ - - ANYNL03: - case CHAR_LF: - if (codevalue == OP_ANYNL_EXTRA + OP_TYPEPOSUPTO) - { - active_count--; /* Remove non-match possibility */ - next_active_state--; - } - if (++count >= (int)GET2(code, 1)) - { ADD_NEW_DATA(-(state_offset + 2 + IMM2_SIZE), 0, ncount); } - else - { ADD_NEW_DATA(-state_offset, count, ncount); } - break; - - default: - break; - } - } - break; - - /*-----------------------------------------------------------------*/ - case OP_VSPACE_EXTRA + OP_TYPEEXACT: - case OP_VSPACE_EXTRA + OP_TYPEUPTO: - case OP_VSPACE_EXTRA + OP_TYPEMINUPTO: - case OP_VSPACE_EXTRA + OP_TYPEPOSUPTO: - if (codevalue != OP_VSPACE_EXTRA + OP_TYPEEXACT) - { ADD_ACTIVE(state_offset + 2 + IMM2_SIZE, 0); } - count = current_state->count; /* Number already matched */ - if (clen > 0) - { - BOOL OK; - switch (c) - { - VSPACE_CASES: - OK = TRUE; - break; - - default: - OK = FALSE; - } - - if (OK == (d == OP_VSPACE)) - { - if (codevalue == OP_VSPACE_EXTRA + OP_TYPEPOSUPTO) - { - active_count--; /* Remove non-match possibility */ - next_active_state--; - } - if (++count >= (int)GET2(code, 1)) - { ADD_NEW_DATA(-(state_offset + 2 + IMM2_SIZE), 0, 0); } - else - { ADD_NEW_DATA(-state_offset, count, 0); } - } - } - break; - - /*-----------------------------------------------------------------*/ - case OP_HSPACE_EXTRA + OP_TYPEEXACT: - case OP_HSPACE_EXTRA + OP_TYPEUPTO: - case OP_HSPACE_EXTRA + OP_TYPEMINUPTO: - case OP_HSPACE_EXTRA + OP_TYPEPOSUPTO: - if (codevalue != OP_HSPACE_EXTRA + OP_TYPEEXACT) - { ADD_ACTIVE(state_offset + 2 + IMM2_SIZE, 0); } - count = current_state->count; /* Number already matched */ - if (clen > 0) - { - BOOL OK; - switch (c) - { - HSPACE_CASES: - OK = TRUE; - break; - - default: - OK = FALSE; - break; - } - - if (OK == (d == OP_HSPACE)) - { - if (codevalue == OP_HSPACE_EXTRA + OP_TYPEPOSUPTO) - { - active_count--; /* Remove non-match possibility */ - next_active_state--; - } - if (++count >= (int)GET2(code, 1)) - { ADD_NEW_DATA(-(state_offset + 2 + IMM2_SIZE), 0, 0); } - else - { ADD_NEW_DATA(-state_offset, count, 0); } - } - } - break; - -/* ========================================================================== */ - /* These opcodes are followed by a character that is usually compared - to the current subject character; it is loaded into d. We still get - here even if there is no subject character, because in some cases zero - repetitions are permitted. */ - - /*-----------------------------------------------------------------*/ - case OP_CHAR: - if (clen > 0 && c == d) { ADD_NEW(state_offset + dlen + 1, 0); } - break; - - /*-----------------------------------------------------------------*/ - case OP_CHARI: - if (clen == 0) break; - -#ifdef SUPPORT_UTF - if (utf) - { - if (c == d) { ADD_NEW(state_offset + dlen + 1, 0); } else - { - unsigned int othercase; - if (c < 128) - othercase = fcc[c]; - else - /* If we have Unicode property support, we can use it to test the - other case of the character. */ -#ifdef SUPPORT_UCP - othercase = UCD_OTHERCASE(c); -#else - othercase = NOTACHAR; -#endif - - if (d == othercase) { ADD_NEW(state_offset + dlen + 1, 0); } - } - } - else -#endif /* SUPPORT_UTF */ - /* Not UTF mode */ - { - if (TABLE_GET(c, lcc, c) == TABLE_GET(d, lcc, d)) - { ADD_NEW(state_offset + 2, 0); } - } - break; - - -#ifdef SUPPORT_UCP - /*-----------------------------------------------------------------*/ - /* This is a tricky one because it can match more than one character. - Find out how many characters to skip, and then set up a negative state - to wait for them to pass before continuing. */ - - case OP_EXTUNI: - if (clen > 0) - { - int lgb, rgb; - const pcre_uchar *nptr = ptr + clen; - int ncount = 0; - lgb = UCD_GRAPHBREAK(c); - while (nptr < end_subject) - { - dlen = 1; - if (!utf) d = *nptr; else { GETCHARLEN(d, nptr, dlen); } - rgb = UCD_GRAPHBREAK(d); - if ((PRIV(ucp_gbtable)[lgb] & (1 << rgb)) == 0) break; - ncount++; - lgb = rgb; - nptr += dlen; - } - if (nptr >= end_subject && (md->moptions & PCRE_PARTIAL_HARD) != 0) - reset_could_continue = TRUE; - ADD_NEW_DATA(-(state_offset + 1), 0, ncount); - } - break; -#endif - - /*-----------------------------------------------------------------*/ - /* This is a tricky like EXTUNI because it too can match more than one - character (when CR is followed by LF). In this case, set up a negative - state to wait for one character to pass before continuing. */ - - case OP_ANYNL: - if (clen > 0) switch(c) - { - case CHAR_VT: - case CHAR_FF: - case CHAR_NEL: -#ifndef EBCDIC - case 0x2028: - case 0x2029: -#endif /* Not EBCDIC */ - if ((md->moptions & PCRE_BSR_ANYCRLF) != 0) break; - - case CHAR_LF: - ADD_NEW(state_offset + 1, 0); - break; - - case CHAR_CR: - if (ptr + 1 >= end_subject) - { - ADD_NEW(state_offset + 1, 0); - if ((md->moptions & PCRE_PARTIAL_HARD) != 0) - reset_could_continue = TRUE; - } - else if (UCHAR21TEST(ptr + 1) == CHAR_LF) - { - ADD_NEW_DATA(-(state_offset + 1), 0, 1); - } - else - { - ADD_NEW(state_offset + 1, 0); - } - break; - } - break; - - /*-----------------------------------------------------------------*/ - case OP_NOT_VSPACE: - if (clen > 0) switch(c) - { - VSPACE_CASES: - break; - - default: - ADD_NEW(state_offset + 1, 0); - break; - } - break; - - /*-----------------------------------------------------------------*/ - case OP_VSPACE: - if (clen > 0) switch(c) - { - VSPACE_CASES: - ADD_NEW(state_offset + 1, 0); - break; - - default: - break; - } - break; - - /*-----------------------------------------------------------------*/ - case OP_NOT_HSPACE: - if (clen > 0) switch(c) - { - HSPACE_CASES: - break; - - default: - ADD_NEW(state_offset + 1, 0); - break; - } - break; - - /*-----------------------------------------------------------------*/ - case OP_HSPACE: - if (clen > 0) switch(c) - { - HSPACE_CASES: - ADD_NEW(state_offset + 1, 0); - break; - - default: - break; - } - break; - - /*-----------------------------------------------------------------*/ - /* Match a negated single character casefully. */ - - case OP_NOT: - if (clen > 0 && c != d) { ADD_NEW(state_offset + dlen + 1, 0); } - break; - - /*-----------------------------------------------------------------*/ - /* Match a negated single character caselessly. */ - - case OP_NOTI: - if (clen > 0) - { - unsigned int otherd; -#ifdef SUPPORT_UTF - if (utf && d >= 128) - { -#ifdef SUPPORT_UCP - otherd = UCD_OTHERCASE(d); -#endif /* SUPPORT_UCP */ - } - else -#endif /* SUPPORT_UTF */ - otherd = TABLE_GET(d, fcc, d); - if (c != d && c != otherd) - { ADD_NEW(state_offset + dlen + 1, 0); } - } - break; - - /*-----------------------------------------------------------------*/ - case OP_PLUSI: - case OP_MINPLUSI: - case OP_POSPLUSI: - case OP_NOTPLUSI: - case OP_NOTMINPLUSI: - case OP_NOTPOSPLUSI: - caseless = TRUE; - codevalue -= OP_STARI - OP_STAR; - - /* Fall through */ - case OP_PLUS: - case OP_MINPLUS: - case OP_POSPLUS: - case OP_NOTPLUS: - case OP_NOTMINPLUS: - case OP_NOTPOSPLUS: - count = current_state->count; /* Already matched */ - if (count > 0) { ADD_ACTIVE(state_offset + dlen + 1, 0); } - if (clen > 0) - { - pcre_uint32 otherd = NOTACHAR; - if (caseless) - { -#ifdef SUPPORT_UTF - if (utf && d >= 128) - { -#ifdef SUPPORT_UCP - otherd = UCD_OTHERCASE(d); -#endif /* SUPPORT_UCP */ - } - else -#endif /* SUPPORT_UTF */ - otherd = TABLE_GET(d, fcc, d); - } - if ((c == d || c == otherd) == (codevalue < OP_NOTSTAR)) - { - if (count > 0 && - (codevalue == OP_POSPLUS || codevalue == OP_NOTPOSPLUS)) - { - active_count--; /* Remove non-match possibility */ - next_active_state--; - } - count++; - ADD_NEW(state_offset, count); - } - } - break; - - /*-----------------------------------------------------------------*/ - case OP_QUERYI: - case OP_MINQUERYI: - case OP_POSQUERYI: - case OP_NOTQUERYI: - case OP_NOTMINQUERYI: - case OP_NOTPOSQUERYI: - caseless = TRUE; - codevalue -= OP_STARI - OP_STAR; - /* Fall through */ - case OP_QUERY: - case OP_MINQUERY: - case OP_POSQUERY: - case OP_NOTQUERY: - case OP_NOTMINQUERY: - case OP_NOTPOSQUERY: - ADD_ACTIVE(state_offset + dlen + 1, 0); - if (clen > 0) - { - pcre_uint32 otherd = NOTACHAR; - if (caseless) - { -#ifdef SUPPORT_UTF - if (utf && d >= 128) - { -#ifdef SUPPORT_UCP - otherd = UCD_OTHERCASE(d); -#endif /* SUPPORT_UCP */ - } - else -#endif /* SUPPORT_UTF */ - otherd = TABLE_GET(d, fcc, d); - } - if ((c == d || c == otherd) == (codevalue < OP_NOTSTAR)) - { - if (codevalue == OP_POSQUERY || codevalue == OP_NOTPOSQUERY) - { - active_count--; /* Remove non-match possibility */ - next_active_state--; - } - ADD_NEW(state_offset + dlen + 1, 0); - } - } - break; - - /*-----------------------------------------------------------------*/ - case OP_STARI: - case OP_MINSTARI: - case OP_POSSTARI: - case OP_NOTSTARI: - case OP_NOTMINSTARI: - case OP_NOTPOSSTARI: - caseless = TRUE; - codevalue -= OP_STARI - OP_STAR; - /* Fall through */ - case OP_STAR: - case OP_MINSTAR: - case OP_POSSTAR: - case OP_NOTSTAR: - case OP_NOTMINSTAR: - case OP_NOTPOSSTAR: - ADD_ACTIVE(state_offset + dlen + 1, 0); - if (clen > 0) - { - pcre_uint32 otherd = NOTACHAR; - if (caseless) - { -#ifdef SUPPORT_UTF - if (utf && d >= 128) - { -#ifdef SUPPORT_UCP - otherd = UCD_OTHERCASE(d); -#endif /* SUPPORT_UCP */ - } - else -#endif /* SUPPORT_UTF */ - otherd = TABLE_GET(d, fcc, d); - } - if ((c == d || c == otherd) == (codevalue < OP_NOTSTAR)) - { - if (codevalue == OP_POSSTAR || codevalue == OP_NOTPOSSTAR) - { - active_count--; /* Remove non-match possibility */ - next_active_state--; - } - ADD_NEW(state_offset, 0); - } - } - break; - - /*-----------------------------------------------------------------*/ - case OP_EXACTI: - case OP_NOTEXACTI: - caseless = TRUE; - codevalue -= OP_STARI - OP_STAR; - /* Fall through */ - case OP_EXACT: - case OP_NOTEXACT: - count = current_state->count; /* Number already matched */ - if (clen > 0) - { - pcre_uint32 otherd = NOTACHAR; - if (caseless) - { -#ifdef SUPPORT_UTF - if (utf && d >= 128) - { -#ifdef SUPPORT_UCP - otherd = UCD_OTHERCASE(d); -#endif /* SUPPORT_UCP */ - } - else -#endif /* SUPPORT_UTF */ - otherd = TABLE_GET(d, fcc, d); - } - if ((c == d || c == otherd) == (codevalue < OP_NOTSTAR)) - { - if (++count >= (int)GET2(code, 1)) - { ADD_NEW(state_offset + dlen + 1 + IMM2_SIZE, 0); } - else - { ADD_NEW(state_offset, count); } - } - } - break; - - /*-----------------------------------------------------------------*/ - case OP_UPTOI: - case OP_MINUPTOI: - case OP_POSUPTOI: - case OP_NOTUPTOI: - case OP_NOTMINUPTOI: - case OP_NOTPOSUPTOI: - caseless = TRUE; - codevalue -= OP_STARI - OP_STAR; - /* Fall through */ - case OP_UPTO: - case OP_MINUPTO: - case OP_POSUPTO: - case OP_NOTUPTO: - case OP_NOTMINUPTO: - case OP_NOTPOSUPTO: - ADD_ACTIVE(state_offset + dlen + 1 + IMM2_SIZE, 0); - count = current_state->count; /* Number already matched */ - if (clen > 0) - { - pcre_uint32 otherd = NOTACHAR; - if (caseless) - { -#ifdef SUPPORT_UTF - if (utf && d >= 128) - { -#ifdef SUPPORT_UCP - otherd = UCD_OTHERCASE(d); -#endif /* SUPPORT_UCP */ - } - else -#endif /* SUPPORT_UTF */ - otherd = TABLE_GET(d, fcc, d); - } - if ((c == d || c == otherd) == (codevalue < OP_NOTSTAR)) - { - if (codevalue == OP_POSUPTO || codevalue == OP_NOTPOSUPTO) - { - active_count--; /* Remove non-match possibility */ - next_active_state--; - } - if (++count >= (int)GET2(code, 1)) - { ADD_NEW(state_offset + dlen + 1 + IMM2_SIZE, 0); } - else - { ADD_NEW(state_offset, count); } - } - } - break; - - -/* ========================================================================== */ - /* These are the class-handling opcodes */ - - case OP_CLASS: - case OP_NCLASS: - case OP_XCLASS: - { - BOOL isinclass = FALSE; - int next_state_offset; - const pcre_uchar *ecode; - - /* For a simple class, there is always just a 32-byte table, and we - can set isinclass from it. */ - - if (codevalue != OP_XCLASS) - { - ecode = code + 1 + (32 / sizeof(pcre_uchar)); - if (clen > 0) - { - isinclass = (c > 255)? (codevalue == OP_NCLASS) : - ((((pcre_uint8 *)(code + 1))[c/8] & (1 << (c&7))) != 0); - } - } - - /* An extended class may have a table or a list of single characters, - ranges, or both, and it may be positive or negative. There's a - function that sorts all this out. */ - - else - { - ecode = code + GET(code, 1); - if (clen > 0) isinclass = PRIV(xclass)(c, code + 1 + LINK_SIZE, utf); - } - - /* At this point, isinclass is set for all kinds of class, and ecode - points to the byte after the end of the class. If there is a - quantifier, this is where it will be. */ - - next_state_offset = (int)(ecode - start_code); - - switch (*ecode) - { - case OP_CRSTAR: - case OP_CRMINSTAR: - case OP_CRPOSSTAR: - ADD_ACTIVE(next_state_offset + 1, 0); - if (isinclass) - { - if (*ecode == OP_CRPOSSTAR) - { - active_count--; /* Remove non-match possibility */ - next_active_state--; - } - ADD_NEW(state_offset, 0); - } - break; - - case OP_CRPLUS: - case OP_CRMINPLUS: - case OP_CRPOSPLUS: - count = current_state->count; /* Already matched */ - if (count > 0) { ADD_ACTIVE(next_state_offset + 1, 0); } - if (isinclass) - { - if (count > 0 && *ecode == OP_CRPOSPLUS) - { - active_count--; /* Remove non-match possibility */ - next_active_state--; - } - count++; - ADD_NEW(state_offset, count); - } - break; - - case OP_CRQUERY: - case OP_CRMINQUERY: - case OP_CRPOSQUERY: - ADD_ACTIVE(next_state_offset + 1, 0); - if (isinclass) - { - if (*ecode == OP_CRPOSQUERY) - { - active_count--; /* Remove non-match possibility */ - next_active_state--; - } - ADD_NEW(next_state_offset + 1, 0); - } - break; - - case OP_CRRANGE: - case OP_CRMINRANGE: - case OP_CRPOSRANGE: - count = current_state->count; /* Already matched */ - if (count >= (int)GET2(ecode, 1)) - { ADD_ACTIVE(next_state_offset + 1 + 2 * IMM2_SIZE, 0); } - if (isinclass) - { - int max = (int)GET2(ecode, 1 + IMM2_SIZE); - if (*ecode == OP_CRPOSRANGE) - { - active_count--; /* Remove non-match possibility */ - next_active_state--; - } - if (++count >= max && max != 0) /* Max 0 => no limit */ - { ADD_NEW(next_state_offset + 1 + 2 * IMM2_SIZE, 0); } - else - { ADD_NEW(state_offset, count); } - } - break; - - default: - if (isinclass) { ADD_NEW(next_state_offset, 0); } - break; - } - } - break; - -/* ========================================================================== */ - /* These are the opcodes for fancy brackets of various kinds. We have - to use recursion in order to handle them. The "always failing" assertion - (?!) is optimised to OP_FAIL when compiling, so we have to support that, - though the other "backtracking verbs" are not supported. */ - - case OP_FAIL: - forced_fail++; /* Count FAILs for multiple states */ - break; - - case OP_ASSERT: - case OP_ASSERT_NOT: - case OP_ASSERTBACK: - case OP_ASSERTBACK_NOT: - { - int rc; - int local_offsets[2]; - int local_workspace[1000]; - const pcre_uchar *endasscode = code + GET(code, 1); - - while (*endasscode == OP_ALT) endasscode += GET(endasscode, 1); - - rc = internal_dfa_exec( - md, /* static match data */ - code, /* this subexpression's code */ - ptr, /* where we currently are */ - (int)(ptr - start_subject), /* start offset */ - local_offsets, /* offset vector */ - sizeof(local_offsets)/sizeof(int), /* size of same */ - local_workspace, /* workspace vector */ - sizeof(local_workspace)/sizeof(int), /* size of same */ - rlevel); /* function recursion level */ - - if (rc == PCRE_ERROR_DFA_UITEM) return rc; - if ((rc >= 0) == (codevalue == OP_ASSERT || codevalue == OP_ASSERTBACK)) - { ADD_ACTIVE((int)(endasscode + LINK_SIZE + 1 - start_code), 0); } - } - break; - - /*-----------------------------------------------------------------*/ - case OP_COND: - case OP_SCOND: - { - int local_offsets[1000]; - int local_workspace[1000]; - int codelink = GET(code, 1); - int condcode; - - /* Because of the way auto-callout works during compile, a callout item - is inserted between OP_COND and an assertion condition. This does not - happen for the other conditions. */ - - if (code[LINK_SIZE+1] == OP_CALLOUT) - { - rrc = 0; - if (PUBL(callout) != NULL) - { - PUBL(callout_block) cb; - cb.version = 1; /* Version 1 of the callout block */ - cb.callout_number = code[LINK_SIZE+2]; - cb.offset_vector = offsets; -#if defined COMPILE_PCRE8 - cb.subject = (PCRE_SPTR)start_subject; -#elif defined COMPILE_PCRE16 - cb.subject = (PCRE_SPTR16)start_subject; -#elif defined COMPILE_PCRE32 - cb.subject = (PCRE_SPTR32)start_subject; -#endif - cb.subject_length = (int)(end_subject - start_subject); - cb.start_match = (int)(current_subject - start_subject); - cb.current_position = (int)(ptr - start_subject); - cb.pattern_position = GET(code, LINK_SIZE + 3); - cb.next_item_length = GET(code, 3 + 2*LINK_SIZE); - cb.capture_top = 1; - cb.capture_last = -1; - cb.callout_data = md->callout_data; - cb.mark = NULL; /* No (*MARK) support */ - if ((rrc = (*PUBL(callout))(&cb)) < 0) return rrc; /* Abandon */ - } - if (rrc > 0) break; /* Fail this thread */ - code += PRIV(OP_lengths)[OP_CALLOUT]; /* Skip callout data */ - } - - condcode = code[LINK_SIZE+1]; - - /* Back reference conditions and duplicate named recursion conditions - are not supported */ - - if (condcode == OP_CREF || condcode == OP_DNCREF || - condcode == OP_DNRREF) - return PCRE_ERROR_DFA_UCOND; - - /* The DEFINE condition is always false, and the assertion (?!) is - converted to OP_FAIL. */ - - if (condcode == OP_DEF || condcode == OP_FAIL) - { ADD_ACTIVE(state_offset + codelink + LINK_SIZE + 1, 0); } - - /* The only supported version of OP_RREF is for the value RREF_ANY, - which means "test if in any recursion". We can't test for specifically - recursed groups. */ - - else if (condcode == OP_RREF) - { - int value = GET2(code, LINK_SIZE + 2); - if (value != RREF_ANY) return PCRE_ERROR_DFA_UCOND; - if (md->recursive != NULL) - { ADD_ACTIVE(state_offset + LINK_SIZE + 2 + IMM2_SIZE, 0); } - else { ADD_ACTIVE(state_offset + codelink + LINK_SIZE + 1, 0); } - } - - /* Otherwise, the condition is an assertion */ - - else - { - int rc; - const pcre_uchar *asscode = code + LINK_SIZE + 1; - const pcre_uchar *endasscode = asscode + GET(asscode, 1); - - while (*endasscode == OP_ALT) endasscode += GET(endasscode, 1); - - rc = internal_dfa_exec( - md, /* fixed match data */ - asscode, /* this subexpression's code */ - ptr, /* where we currently are */ - (int)(ptr - start_subject), /* start offset */ - local_offsets, /* offset vector */ - sizeof(local_offsets)/sizeof(int), /* size of same */ - local_workspace, /* workspace vector */ - sizeof(local_workspace)/sizeof(int), /* size of same */ - rlevel); /* function recursion level */ - - if (rc == PCRE_ERROR_DFA_UITEM) return rc; - if ((rc >= 0) == - (condcode == OP_ASSERT || condcode == OP_ASSERTBACK)) - { ADD_ACTIVE((int)(endasscode + LINK_SIZE + 1 - start_code), 0); } - else - { ADD_ACTIVE(state_offset + codelink + LINK_SIZE + 1, 0); } - } - } - break; - - /*-----------------------------------------------------------------*/ - case OP_RECURSE: - { - dfa_recursion_info *ri; - int local_offsets[1000]; - int local_workspace[1000]; - const pcre_uchar *callpat = start_code + GET(code, 1); - int recno = (callpat == md->start_code)? 0 : - GET2(callpat, 1 + LINK_SIZE); - int rc; - - DPRINTF(("%.*sStarting regex recursion\n", rlevel*2-2, SP)); - - /* Check for repeating a recursion without advancing the subject - pointer. This should catch convoluted mutual recursions. (Some simple - cases are caught at compile time.) */ - - for (ri = md->recursive; ri != NULL; ri = ri->prevrec) - if (recno == ri->group_num && ptr == ri->subject_position) - return PCRE_ERROR_RECURSELOOP; - - /* Remember this recursion and where we started it so as to - catch infinite loops. */ - - new_recursive.group_num = recno; - new_recursive.subject_position = ptr; - new_recursive.prevrec = md->recursive; - md->recursive = &new_recursive; - - rc = internal_dfa_exec( - md, /* fixed match data */ - callpat, /* this subexpression's code */ - ptr, /* where we currently are */ - (int)(ptr - start_subject), /* start offset */ - local_offsets, /* offset vector */ - sizeof(local_offsets)/sizeof(int), /* size of same */ - local_workspace, /* workspace vector */ - sizeof(local_workspace)/sizeof(int), /* size of same */ - rlevel); /* function recursion level */ - - md->recursive = new_recursive.prevrec; /* Done this recursion */ - - DPRINTF(("%.*sReturn from regex recursion: rc=%d\n", rlevel*2-2, SP, - rc)); - - /* Ran out of internal offsets */ - - if (rc == 0) return PCRE_ERROR_DFA_RECURSE; - - /* For each successful matched substring, set up the next state with a - count of characters to skip before trying it. Note that the count is in - characters, not bytes. */ - - if (rc > 0) - { - for (rc = rc*2 - 2; rc >= 0; rc -= 2) - { - int charcount = local_offsets[rc+1] - local_offsets[rc]; -#if defined SUPPORT_UTF && !defined COMPILE_PCRE32 - if (utf) - { - const pcre_uchar *p = start_subject + local_offsets[rc]; - const pcre_uchar *pp = start_subject + local_offsets[rc+1]; - while (p < pp) if (NOT_FIRSTCHAR(*p++)) charcount--; - } -#endif - if (charcount > 0) - { - ADD_NEW_DATA(-(state_offset + LINK_SIZE + 1), 0, (charcount - 1)); - } - else - { - ADD_ACTIVE(state_offset + LINK_SIZE + 1, 0); - } - } - } - else if (rc != PCRE_ERROR_NOMATCH) return rc; - } - break; - - /*-----------------------------------------------------------------*/ - case OP_BRAPOS: - case OP_SBRAPOS: - case OP_CBRAPOS: - case OP_SCBRAPOS: - case OP_BRAPOSZERO: - { - int charcount, matched_count; - const pcre_uchar *local_ptr = ptr; - BOOL allow_zero; - - if (codevalue == OP_BRAPOSZERO) - { - allow_zero = TRUE; - codevalue = *(++code); /* Codevalue will be one of above BRAs */ - } - else allow_zero = FALSE; - - /* Loop to match the subpattern as many times as possible as if it were - a complete pattern. */ - - for (matched_count = 0;; matched_count++) - { - int local_offsets[2]; - int local_workspace[1000]; - - int rc = internal_dfa_exec( - md, /* fixed match data */ - code, /* this subexpression's code */ - local_ptr, /* where we currently are */ - (int)(ptr - start_subject), /* start offset */ - local_offsets, /* offset vector */ - sizeof(local_offsets)/sizeof(int), /* size of same */ - local_workspace, /* workspace vector */ - sizeof(local_workspace)/sizeof(int), /* size of same */ - rlevel); /* function recursion level */ - - /* Failed to match */ - - if (rc < 0) - { - if (rc != PCRE_ERROR_NOMATCH) return rc; - break; - } - - /* Matched: break the loop if zero characters matched. */ - - charcount = local_offsets[1] - local_offsets[0]; - if (charcount == 0) break; - local_ptr += charcount; /* Advance temporary position ptr */ - } - - /* At this point we have matched the subpattern matched_count - times, and local_ptr is pointing to the character after the end of the - last match. */ - - if (matched_count > 0 || allow_zero) - { - const pcre_uchar *end_subpattern = code; - int next_state_offset; - - do { end_subpattern += GET(end_subpattern, 1); } - while (*end_subpattern == OP_ALT); - next_state_offset = - (int)(end_subpattern - start_code + LINK_SIZE + 1); - - /* Optimization: if there are no more active states, and there - are no new states yet set up, then skip over the subject string - right here, to save looping. Otherwise, set up the new state to swing - into action when the end of the matched substring is reached. */ - - if (i + 1 >= active_count && new_count == 0) - { - ptr = local_ptr; - clen = 0; - ADD_NEW(next_state_offset, 0); - } - else - { - const pcre_uchar *p = ptr; - const pcre_uchar *pp = local_ptr; - charcount = (int)(pp - p); -#if defined SUPPORT_UTF && !defined COMPILE_PCRE32 - if (utf) while (p < pp) if (NOT_FIRSTCHAR(*p++)) charcount--; -#endif - ADD_NEW_DATA(-next_state_offset, 0, (charcount - 1)); - } - } - } - break; - - /*-----------------------------------------------------------------*/ - case OP_ONCE: - case OP_ONCE_NC: - { - int local_offsets[2]; - int local_workspace[1000]; - - int rc = internal_dfa_exec( - md, /* fixed match data */ - code, /* this subexpression's code */ - ptr, /* where we currently are */ - (int)(ptr - start_subject), /* start offset */ - local_offsets, /* offset vector */ - sizeof(local_offsets)/sizeof(int), /* size of same */ - local_workspace, /* workspace vector */ - sizeof(local_workspace)/sizeof(int), /* size of same */ - rlevel); /* function recursion level */ - - if (rc >= 0) - { - const pcre_uchar *end_subpattern = code; - int charcount = local_offsets[1] - local_offsets[0]; - int next_state_offset, repeat_state_offset; - - do { end_subpattern += GET(end_subpattern, 1); } - while (*end_subpattern == OP_ALT); - next_state_offset = - (int)(end_subpattern - start_code + LINK_SIZE + 1); - - /* If the end of this subpattern is KETRMAX or KETRMIN, we must - arrange for the repeat state also to be added to the relevant list. - Calculate the offset, or set -1 for no repeat. */ - - repeat_state_offset = (*end_subpattern == OP_KETRMAX || - *end_subpattern == OP_KETRMIN)? - (int)(end_subpattern - start_code - GET(end_subpattern, 1)) : -1; - - /* If we have matched an empty string, add the next state at the - current character pointer. This is important so that the duplicate - checking kicks in, which is what breaks infinite loops that match an - empty string. */ - - if (charcount == 0) - { - ADD_ACTIVE(next_state_offset, 0); - } - - /* Optimization: if there are no more active states, and there - are no new states yet set up, then skip over the subject string - right here, to save looping. Otherwise, set up the new state to swing - into action when the end of the matched substring is reached. */ - - else if (i + 1 >= active_count && new_count == 0) - { - ptr += charcount; - clen = 0; - ADD_NEW(next_state_offset, 0); - - /* If we are adding a repeat state at the new character position, - we must fudge things so that it is the only current state. - Otherwise, it might be a duplicate of one we processed before, and - that would cause it to be skipped. */ - - if (repeat_state_offset >= 0) - { - next_active_state = active_states; - active_count = 0; - i = -1; - ADD_ACTIVE(repeat_state_offset, 0); - } - } - else - { -#if defined SUPPORT_UTF && !defined COMPILE_PCRE32 - if (utf) - { - const pcre_uchar *p = start_subject + local_offsets[0]; - const pcre_uchar *pp = start_subject + local_offsets[1]; - while (p < pp) if (NOT_FIRSTCHAR(*p++)) charcount--; - } -#endif - ADD_NEW_DATA(-next_state_offset, 0, (charcount - 1)); - if (repeat_state_offset >= 0) - { ADD_NEW_DATA(-repeat_state_offset, 0, (charcount - 1)); } - } - } - else if (rc != PCRE_ERROR_NOMATCH) return rc; - } - break; - - -/* ========================================================================== */ - /* Handle callouts */ - - case OP_CALLOUT: - rrc = 0; - if (PUBL(callout) != NULL) - { - PUBL(callout_block) cb; - cb.version = 1; /* Version 1 of the callout block */ - cb.callout_number = code[1]; - cb.offset_vector = offsets; -#if defined COMPILE_PCRE8 - cb.subject = (PCRE_SPTR)start_subject; -#elif defined COMPILE_PCRE16 - cb.subject = (PCRE_SPTR16)start_subject; -#elif defined COMPILE_PCRE32 - cb.subject = (PCRE_SPTR32)start_subject; -#endif - cb.subject_length = (int)(end_subject - start_subject); - cb.start_match = (int)(current_subject - start_subject); - cb.current_position = (int)(ptr - start_subject); - cb.pattern_position = GET(code, 2); - cb.next_item_length = GET(code, 2 + LINK_SIZE); - cb.capture_top = 1; - cb.capture_last = -1; - cb.callout_data = md->callout_data; - cb.mark = NULL; /* No (*MARK) support */ - if ((rrc = (*PUBL(callout))(&cb)) < 0) return rrc; /* Abandon */ - } - if (rrc == 0) - { ADD_ACTIVE(state_offset + PRIV(OP_lengths)[OP_CALLOUT], 0); } - break; - - -/* ========================================================================== */ - default: /* Unsupported opcode */ - return PCRE_ERROR_DFA_UITEM; - } - - NEXT_ACTIVE_STATE: continue; - - } /* End of loop scanning active states */ - - /* We have finished the processing at the current subject character. If no - new states have been set for the next character, we have found all the - matches that we are going to find. If we are at the top level and partial - matching has been requested, check for appropriate conditions. - - The "forced_ fail" variable counts the number of (*F) encountered for the - character. If it is equal to the original active_count (saved in - workspace[1]) it means that (*F) was found on every active state. In this - case we don't want to give a partial match. - - The "could_continue" variable is true if a state could have continued but - for the fact that the end of the subject was reached. */ - - if (new_count <= 0) - { - if (rlevel == 1 && /* Top level, and */ - could_continue && /* Some could go on, and */ - forced_fail != workspace[1] && /* Not all forced fail & */ - ( /* either... */ - (md->moptions & PCRE_PARTIAL_HARD) != 0 /* Hard partial */ - || /* or... */ - ((md->moptions & PCRE_PARTIAL_SOFT) != 0 && /* Soft partial and */ - match_count < 0) /* no matches */ - ) && /* And... */ - ( - partial_newline || /* Either partial NL */ - ( /* or ... */ - ptr >= end_subject && /* End of subject and */ - ptr > md->start_used_ptr) /* Inspected non-empty string */ - ) - ) - match_count = PCRE_ERROR_PARTIAL; - DPRINTF(("%.*sEnd of internal_dfa_exec %d: returning %d\n" - "%.*s---------------------\n\n", rlevel*2-2, SP, rlevel, match_count, - rlevel*2-2, SP)); - break; /* In effect, "return", but see the comment below */ - } - - /* One or more states are active for the next character. */ - - ptr += clen; /* Advance to next subject character */ - } /* Loop to move along the subject string */ - -/* Control gets here from "break" a few lines above. We do it this way because -if we use "return" above, we have compiler trouble. Some compilers warn if -there's nothing here because they think the function doesn't return a value. On -the other hand, if we put a dummy statement here, some more clever compilers -complain that it can't be reached. Sigh. */ - -return match_count; -} - - - - -/************************************************* -* Execute a Regular Expression - DFA engine * -*************************************************/ - -/* This external function applies a compiled re to a subject string using a DFA -engine. This function calls the internal function multiple times if the pattern -is not anchored. - -Arguments: - argument_re points to the compiled expression - extra_data points to extra data or is NULL - subject points to the subject string - length length of subject string (may contain binary zeros) - start_offset where to start in the subject string - options option bits - offsets vector of match offsets - offsetcount size of same - workspace workspace vector - wscount size of same - -Returns: > 0 => number of match offset pairs placed in offsets - = 0 => offsets overflowed; longest matches are present - -1 => failed to match - < -1 => some kind of unexpected problem -*/ - -#if defined COMPILE_PCRE8 -PCRE_EXP_DEFN int PCRE_CALL_CONVENTION -pcre_dfa_exec(const pcre *argument_re, const pcre_extra *extra_data, - const char *subject, int length, int start_offset, int options, int *offsets, - int offsetcount, int *workspace, int wscount) -#elif defined COMPILE_PCRE16 -PCRE_EXP_DEFN int PCRE_CALL_CONVENTION -pcre16_dfa_exec(const pcre16 *argument_re, const pcre16_extra *extra_data, - PCRE_SPTR16 subject, int length, int start_offset, int options, int *offsets, - int offsetcount, int *workspace, int wscount) -#elif defined COMPILE_PCRE32 -PCRE_EXP_DEFN int PCRE_CALL_CONVENTION -pcre32_dfa_exec(const pcre32 *argument_re, const pcre32_extra *extra_data, - PCRE_SPTR32 subject, int length, int start_offset, int options, int *offsets, - int offsetcount, int *workspace, int wscount) -#endif -{ -REAL_PCRE *re = (REAL_PCRE *)argument_re; -dfa_match_data match_block; -dfa_match_data *md = &match_block; -BOOL utf, anchored, startline, firstline; -const pcre_uchar *current_subject, *end_subject; -const pcre_study_data *study = NULL; - -const pcre_uchar *req_char_ptr; -const pcre_uint8 *start_bits = NULL; -BOOL has_first_char = FALSE; -BOOL has_req_char = FALSE; -pcre_uchar first_char = 0; -pcre_uchar first_char2 = 0; -pcre_uchar req_char = 0; -pcre_uchar req_char2 = 0; -int newline; - -/* Plausibility checks */ - -if ((options & ~PUBLIC_DFA_EXEC_OPTIONS) != 0) return PCRE_ERROR_BADOPTION; -if (re == NULL || subject == NULL || workspace == NULL || - (offsets == NULL && offsetcount > 0)) return PCRE_ERROR_NULL; -if (offsetcount < 0) return PCRE_ERROR_BADCOUNT; -if (wscount < 20) return PCRE_ERROR_DFA_WSSIZE; -if (length < 0) return PCRE_ERROR_BADLENGTH; -if (start_offset < 0 || start_offset > length) return PCRE_ERROR_BADOFFSET; - -/* Check that the first field in the block is the magic number. If it is not, -return with PCRE_ERROR_BADMAGIC. However, if the magic number is equal to -REVERSED_MAGIC_NUMBER we return with PCRE_ERROR_BADENDIANNESS, which -means that the pattern is likely compiled with different endianness. */ - -if (re->magic_number != MAGIC_NUMBER) - return re->magic_number == REVERSED_MAGIC_NUMBER? - PCRE_ERROR_BADENDIANNESS:PCRE_ERROR_BADMAGIC; -if ((re->flags & PCRE_MODE) == 0) return PCRE_ERROR_BADMODE; - -/* If restarting after a partial match, do some sanity checks on the contents -of the workspace. */ - -if ((options & PCRE_DFA_RESTART) != 0) - { - if ((workspace[0] & (-2)) != 0 || workspace[1] < 1 || - workspace[1] > (wscount - 2)/INTS_PER_STATEBLOCK) - return PCRE_ERROR_DFA_BADRESTART; - } - -/* Set up study, callout, and table data */ - -md->tables = re->tables; -md->callout_data = NULL; - -if (extra_data != NULL) - { - unsigned long int flags = extra_data->flags; - if ((flags & PCRE_EXTRA_STUDY_DATA) != 0) - study = (const pcre_study_data *)extra_data->study_data; - if ((flags & PCRE_EXTRA_MATCH_LIMIT) != 0) return PCRE_ERROR_DFA_UMLIMIT; - if ((flags & PCRE_EXTRA_MATCH_LIMIT_RECURSION) != 0) - return PCRE_ERROR_DFA_UMLIMIT; - if ((flags & PCRE_EXTRA_CALLOUT_DATA) != 0) - md->callout_data = extra_data->callout_data; - if ((flags & PCRE_EXTRA_TABLES) != 0) - md->tables = extra_data->tables; - } - -/* Set some local values */ - -current_subject = (const pcre_uchar *)subject + start_offset; -end_subject = (const pcre_uchar *)subject + length; -req_char_ptr = current_subject - 1; - -#ifdef SUPPORT_UTF -/* PCRE_UTF(16|32) have the same value as PCRE_UTF8. */ -utf = (re->options & PCRE_UTF8) != 0; -#else -utf = FALSE; -#endif - -anchored = (options & (PCRE_ANCHORED|PCRE_DFA_RESTART)) != 0 || - (re->options & PCRE_ANCHORED) != 0; - -/* The remaining fixed data for passing around. */ - -md->start_code = (const pcre_uchar *)argument_re + - re->name_table_offset + re->name_count * re->name_entry_size; -md->start_subject = (const pcre_uchar *)subject; -md->end_subject = end_subject; -md->start_offset = start_offset; -md->moptions = options; -md->poptions = re->options; - -/* If the BSR option is not set at match time, copy what was set -at compile time. */ - -if ((md->moptions & (PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE)) == 0) - { - if ((re->options & (PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE)) != 0) - md->moptions |= re->options & (PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE); -#ifdef BSR_ANYCRLF - else md->moptions |= PCRE_BSR_ANYCRLF; -#endif - } - -/* Handle different types of newline. The three bits give eight cases. If -nothing is set at run time, whatever was used at compile time applies. */ - -switch ((((options & PCRE_NEWLINE_BITS) == 0)? re->options : (pcre_uint32)options) & - PCRE_NEWLINE_BITS) - { - case 0: newline = NEWLINE; break; /* Compile-time default */ - case PCRE_NEWLINE_CR: newline = CHAR_CR; break; - case PCRE_NEWLINE_LF: newline = CHAR_NL; break; - case PCRE_NEWLINE_CR+ - PCRE_NEWLINE_LF: newline = (CHAR_CR << 8) | CHAR_NL; break; - case PCRE_NEWLINE_ANY: newline = -1; break; - case PCRE_NEWLINE_ANYCRLF: newline = -2; break; - default: return PCRE_ERROR_BADNEWLINE; - } - -if (newline == -2) - { - md->nltype = NLTYPE_ANYCRLF; - } -else if (newline < 0) - { - md->nltype = NLTYPE_ANY; - } -else - { - md->nltype = NLTYPE_FIXED; - if (newline > 255) - { - md->nllen = 2; - md->nl[0] = (newline >> 8) & 255; - md->nl[1] = newline & 255; - } - else - { - md->nllen = 1; - md->nl[0] = newline; - } - } - -/* Check a UTF-8 string if required. Unfortunately there's no way of passing -back the character offset. */ - -#ifdef SUPPORT_UTF -if (utf && (options & PCRE_NO_UTF8_CHECK) == 0) - { - int erroroffset; - int errorcode = PRIV(valid_utf)((pcre_uchar *)subject, length, &erroroffset); - if (errorcode != 0) - { - if (offsetcount >= 2) - { - offsets[0] = erroroffset; - offsets[1] = errorcode; - } -#if defined COMPILE_PCRE8 - return (errorcode <= PCRE_UTF8_ERR5 && (options & PCRE_PARTIAL_HARD) != 0) ? - PCRE_ERROR_SHORTUTF8 : PCRE_ERROR_BADUTF8; -#elif defined COMPILE_PCRE16 - return (errorcode <= PCRE_UTF16_ERR1 && (options & PCRE_PARTIAL_HARD) != 0) ? - PCRE_ERROR_SHORTUTF16 : PCRE_ERROR_BADUTF16; -#elif defined COMPILE_PCRE32 - return PCRE_ERROR_BADUTF32; -#endif - } -#if defined COMPILE_PCRE8 || defined COMPILE_PCRE16 - if (start_offset > 0 && start_offset < length && - NOT_FIRSTCHAR(((PCRE_PUCHAR)subject)[start_offset])) - return PCRE_ERROR_BADUTF8_OFFSET; -#endif - } -#endif - -/* If the exec call supplied NULL for tables, use the inbuilt ones. This -is a feature that makes it possible to save compiled regex and re-use them -in other programs later. */ - -if (md->tables == NULL) md->tables = PRIV(default_tables); - -/* The "must be at the start of a line" flags are used in a loop when finding -where to start. */ - -startline = (re->flags & PCRE_STARTLINE) != 0; -firstline = (re->options & PCRE_FIRSTLINE) != 0; - -/* Set up the first character to match, if available. The first_byte value is -never set for an anchored regular expression, but the anchoring may be forced -at run time, so we have to test for anchoring. The first char may be unset for -an unanchored pattern, of course. If there's no first char and the pattern was -studied, there may be a bitmap of possible first characters. */ - -if (!anchored) - { - if ((re->flags & PCRE_FIRSTSET) != 0) - { - has_first_char = TRUE; - first_char = first_char2 = (pcre_uchar)(re->first_char); - if ((re->flags & PCRE_FCH_CASELESS) != 0) - { - first_char2 = TABLE_GET(first_char, md->tables + fcc_offset, first_char); -#if defined SUPPORT_UCP && !(defined COMPILE_PCRE8) - if (utf && first_char > 127) - first_char2 = UCD_OTHERCASE(first_char); -#endif - } - } - else - { - if (!startline && study != NULL && - (study->flags & PCRE_STUDY_MAPPED) != 0) - start_bits = study->start_bits; - } - } - -/* For anchored or unanchored matches, there may be a "last known required -character" set. */ - -if ((re->flags & PCRE_REQCHSET) != 0) - { - has_req_char = TRUE; - req_char = req_char2 = (pcre_uchar)(re->req_char); - if ((re->flags & PCRE_RCH_CASELESS) != 0) - { - req_char2 = TABLE_GET(req_char, md->tables + fcc_offset, req_char); -#if defined SUPPORT_UCP && !(defined COMPILE_PCRE8) - if (utf && req_char > 127) - req_char2 = UCD_OTHERCASE(req_char); -#endif - } - } - -/* Call the main matching function, looping for a non-anchored regex after a -failed match. If not restarting, perform certain optimizations at the start of -a match. */ - -for (;;) - { - int rc; - - if ((options & PCRE_DFA_RESTART) == 0) - { - const pcre_uchar *save_end_subject = end_subject; - - /* If firstline is TRUE, the start of the match is constrained to the first - line of a multiline string. Implement this by temporarily adjusting - end_subject so that we stop scanning at a newline. If the match fails at - the newline, later code breaks this loop. */ - - if (firstline) - { - PCRE_PUCHAR t = current_subject; -#ifdef SUPPORT_UTF - if (utf) - { - while (t < md->end_subject && !IS_NEWLINE(t)) - { - t++; - ACROSSCHAR(t < end_subject, *t, t++); - } - } - else -#endif - while (t < md->end_subject && !IS_NEWLINE(t)) t++; - end_subject = t; - } - - /* There are some optimizations that avoid running the match if a known - starting point is not found. However, there is an option that disables - these, for testing and for ensuring that all callouts do actually occur. - The option can be set in the regex by (*NO_START_OPT) or passed in - match-time options. */ - - if (((options | re->options) & PCRE_NO_START_OPTIMIZE) == 0) - { - /* Advance to a known first pcre_uchar (i.e. data item) */ - - if (has_first_char) - { - if (first_char != first_char2) - { - pcre_uchar csc; - while (current_subject < end_subject && - (csc = UCHAR21TEST(current_subject)) != first_char && csc != first_char2) - current_subject++; - } - else - while (current_subject < end_subject && - UCHAR21TEST(current_subject) != first_char) - current_subject++; - } - - /* Or to just after a linebreak for a multiline match if possible */ - - else if (startline) - { - if (current_subject > md->start_subject + start_offset) - { -#ifdef SUPPORT_UTF - if (utf) - { - while (current_subject < end_subject && - !WAS_NEWLINE(current_subject)) - { - current_subject++; - ACROSSCHAR(current_subject < end_subject, *current_subject, - current_subject++); - } - } - else -#endif - while (current_subject < end_subject && !WAS_NEWLINE(current_subject)) - current_subject++; - - /* If we have just passed a CR and the newline option is ANY or - ANYCRLF, and we are now at a LF, advance the match position by one - more character. */ - - if (UCHAR21TEST(current_subject - 1) == CHAR_CR && - (md->nltype == NLTYPE_ANY || md->nltype == NLTYPE_ANYCRLF) && - current_subject < end_subject && - UCHAR21TEST(current_subject) == CHAR_NL) - current_subject++; - } - } - - /* Advance to a non-unique first pcre_uchar after study */ - - else if (start_bits != NULL) - { - while (current_subject < end_subject) - { - register pcre_uint32 c = UCHAR21TEST(current_subject); -#ifndef COMPILE_PCRE8 - if (c > 255) c = 255; -#endif - if ((start_bits[c/8] & (1 << (c&7))) != 0) break; - current_subject++; - } - } - } - - /* Restore fudged end_subject */ - - end_subject = save_end_subject; - - /* The following two optimizations are disabled for partial matching or if - disabling is explicitly requested (and of course, by the test above, this - code is not obeyed when restarting after a partial match). */ - - if (((options | re->options) & PCRE_NO_START_OPTIMIZE) == 0 && - (options & (PCRE_PARTIAL_HARD|PCRE_PARTIAL_SOFT)) == 0) - { - /* If the pattern was studied, a minimum subject length may be set. This - is a lower bound; no actual string of that length may actually match the - pattern. Although the value is, strictly, in characters, we treat it as - in pcre_uchar units to avoid spending too much time in this optimization. - */ - - if (study != NULL && (study->flags & PCRE_STUDY_MINLEN) != 0 && - (pcre_uint32)(end_subject - current_subject) < study->minlength) - return PCRE_ERROR_NOMATCH; - - /* If req_char is set, we know that that pcre_uchar must appear in the - subject for the match to succeed. If the first pcre_uchar is set, - req_char must be later in the subject; otherwise the test starts at the - match point. This optimization can save a huge amount of work in patterns - with nested unlimited repeats that aren't going to match. Writing - separate code for cased/caseless versions makes it go faster, as does - using an autoincrement and backing off on a match. - - HOWEVER: when the subject string is very, very long, searching to its end - can take a long time, and give bad performance on quite ordinary - patterns. This showed up when somebody was matching /^C/ on a 32-megabyte - string... so we don't do this when the string is sufficiently long. */ - - if (has_req_char && end_subject - current_subject < REQ_BYTE_MAX) - { - register PCRE_PUCHAR p = current_subject + (has_first_char? 1:0); - - /* We don't need to repeat the search if we haven't yet reached the - place we found it at last time. */ - - if (p > req_char_ptr) - { - if (req_char != req_char2) - { - while (p < end_subject) - { - register pcre_uint32 pp = UCHAR21INCTEST(p); - if (pp == req_char || pp == req_char2) { p--; break; } - } - } - else - { - while (p < end_subject) - { - if (UCHAR21INCTEST(p) == req_char) { p--; break; } - } - } - - /* If we can't find the required pcre_uchar, break the matching loop, - which will cause a return or PCRE_ERROR_NOMATCH. */ - - if (p >= end_subject) break; - - /* If we have found the required pcre_uchar, save the point where we - found it, so that we don't search again next time round the loop if - the start hasn't passed this point yet. */ - - req_char_ptr = p; - } - } - } - } /* End of optimizations that are done when not restarting */ - - /* OK, now we can do the business */ - - md->start_used_ptr = current_subject; - md->recursive = NULL; - - rc = internal_dfa_exec( - md, /* fixed match data */ - md->start_code, /* this subexpression's code */ - current_subject, /* where we currently are */ - start_offset, /* start offset in subject */ - offsets, /* offset vector */ - offsetcount, /* size of same */ - workspace, /* workspace vector */ - wscount, /* size of same */ - 0); /* function recurse level */ - - /* Anything other than "no match" means we are done, always; otherwise, carry - on only if not anchored. */ - - if (rc != PCRE_ERROR_NOMATCH || anchored) - { - if (rc == PCRE_ERROR_PARTIAL && offsetcount >= 2) - { - offsets[0] = (int)(md->start_used_ptr - (PCRE_PUCHAR)subject); - offsets[1] = (int)(end_subject - (PCRE_PUCHAR)subject); - if (offsetcount > 2) - offsets[2] = (int)(current_subject - (PCRE_PUCHAR)subject); - } - return rc; - } - - /* Advance to the next subject character unless we are at the end of a line - and firstline is set. */ - - if (firstline && IS_NEWLINE(current_subject)) break; - current_subject++; -#ifdef SUPPORT_UTF - if (utf) - { - ACROSSCHAR(current_subject < end_subject, *current_subject, - current_subject++); - } -#endif - if (current_subject > end_subject) break; - - /* If we have just passed a CR and we are now at a LF, and the pattern does - not contain any explicit matches for \r or \n, and the newline option is CRLF - or ANY or ANYCRLF, advance the match position by one more character. */ - - if (UCHAR21TEST(current_subject - 1) == CHAR_CR && - current_subject < end_subject && - UCHAR21TEST(current_subject) == CHAR_NL && - (re->flags & PCRE_HASCRORLF) == 0 && - (md->nltype == NLTYPE_ANY || - md->nltype == NLTYPE_ANYCRLF || - md->nllen == 2)) - current_subject++; - - } /* "Bumpalong" loop */ - -return PCRE_ERROR_NOMATCH; -} - -/* End of pcre_dfa_exec.c */ |