From c79f75c57456f8a1594d34deb5966f6d713ba5d2 Mon Sep 17 00:00:00 2001 From: Kirill Volinsky Date: Thu, 8 Aug 2013 08:37:33 +0000 Subject: Minizip in ftpfile replaced with one in zlib.dll git-svn-id: http://svn.miranda-ng.org/main/trunk@5623 1316c22d-e87f-b044-9b9b-93d7a3e3ba9c --- plugins/FTPFileYM/src/zip/crypt.h | 131 --- plugins/FTPFileYM/src/zip/ioapi.c | 246 ----- plugins/FTPFileYM/src/zip/ioapi.h | 201 ---- plugins/FTPFileYM/src/zip/zconf.h | 428 -------- plugins/FTPFileYM/src/zip/zip.c | 2004 ------------------------------------- plugins/FTPFileYM/src/zip/zip.h | 362 ------- plugins/FTPFileYM/src/zip/zlib.h | 1613 ----------------------------- 7 files changed, 4985 deletions(-) delete mode 100644 plugins/FTPFileYM/src/zip/crypt.h delete mode 100644 plugins/FTPFileYM/src/zip/ioapi.c delete mode 100644 plugins/FTPFileYM/src/zip/ioapi.h delete mode 100644 plugins/FTPFileYM/src/zip/zconf.h delete mode 100644 plugins/FTPFileYM/src/zip/zip.c delete mode 100644 plugins/FTPFileYM/src/zip/zip.h delete mode 100644 plugins/FTPFileYM/src/zip/zlib.h (limited to 'plugins/FTPFileYM/src/zip') diff --git a/plugins/FTPFileYM/src/zip/crypt.h b/plugins/FTPFileYM/src/zip/crypt.h deleted file mode 100644 index a01d08d932..0000000000 --- a/plugins/FTPFileYM/src/zip/crypt.h +++ /dev/null @@ -1,131 +0,0 @@ -/* crypt.h -- base code for crypt/uncrypt ZIPfile - - - Version 1.01e, February 12th, 2005 - - Copyright (C) 1998-2005 Gilles Vollant - - This code is a modified version of crypting code in Infozip distribution - - The encryption/decryption parts of this source code (as opposed to the - non-echoing password parts) were originally written in Europe. The - whole source package can be freely distributed, including from the USA. - (Prior to January 2000, re-export from the US was a violation of US law.) - - This encryption code is a direct transcription of the algorithm from - Roger Schlafly, described by Phil Katz in the file appnote.txt. This - file (appnote.txt) is distributed with the PKZIP program (even in the - version without encryption capabilities). - - If you don't need crypting in your application, just define symbols - NOCRYPT and NOUNCRYPT. - - This code support the "Traditional PKWARE Encryption". - - The new AES encryption added on Zip format by Winzip (see the page - http://www.winzip.com/aes_info.htm ) and PKWare PKZip 5.x Strong - Encryption is not supported. -*/ - -#define CRC32(c, b) ((*(pcrc_32_tab+(((int)(c) ^ (b)) & 0xff))) ^ ((c) >> 8)) - -/*********************************************************************** - * Return the next byte in the pseudo-random sequence - */ -static int decrypt_byte(unsigned long* pkeys, const unsigned long* pcrc_32_tab) -{ - unsigned temp; /* POTENTIAL BUG: temp*(temp^1) may overflow in an - * unpredictable manner on 16-bit systems; not a problem - * with any known compiler so far, though */ - - temp = ((unsigned)(*(pkeys+2)) & 0xffff) | 2; - return (int)(((temp * (temp ^ 1)) >> 8) & 0xff); -} - -/*********************************************************************** - * Update the encryption keys with the next byte of plain text - */ -static int update_keys(unsigned long* pkeys,const unsigned long* pcrc_32_tab,int c) -{ - (*(pkeys+0)) = CRC32((*(pkeys+0)), c); - (*(pkeys+1)) += (*(pkeys+0)) & 0xff; - (*(pkeys+1)) = (*(pkeys+1)) * 134775813L + 1; - { - register int keyshift = (int)((*(pkeys+1)) >> 24); - (*(pkeys+2)) = CRC32((*(pkeys+2)), keyshift); - } - return c; -} - - -/*********************************************************************** - * Initialize the encryption keys and the random header according to - * the given password. - */ -static void init_keys(const char* passwd,unsigned long* pkeys,const unsigned long* pcrc_32_tab) -{ - *(pkeys+0) = 305419896L; - *(pkeys+1) = 591751049L; - *(pkeys+2) = 878082192L; - while (*passwd != '\0') { - update_keys(pkeys,pcrc_32_tab,(int)*passwd); - passwd++; - } -} - -#define zdecode(pkeys,pcrc_32_tab,c) \ - (update_keys(pkeys,pcrc_32_tab,c ^= decrypt_byte(pkeys,pcrc_32_tab))) - -#define zencode(pkeys,pcrc_32_tab,c,t) \ - (t=decrypt_byte(pkeys,pcrc_32_tab), update_keys(pkeys,pcrc_32_tab,c), t^(c)) - -#ifdef INCLUDECRYPTINGCODE_IFCRYPTALLOWED - -#define RAND_HEAD_LEN 12 - /* "last resort" source for second part of crypt seed pattern */ -# ifndef ZCR_SEED2 -# define ZCR_SEED2 3141592654UL /* use PI as default pattern */ -# endif - -static int crypthead(const char* passwd, /* password string */ - unsigned char* buf, /* where to write header */ - int bufSize, - unsigned long* pkeys, - const unsigned long* pcrc_32_tab, - unsigned long crcForCrypting) -{ - int n; /* index in random header */ - int t; /* temporary */ - int c; /* random byte */ - unsigned char header[RAND_HEAD_LEN-2]; /* random header */ - static unsigned calls = 0; /* ensure different random header each time */ - - if (bufSize> 7) & 0xff; - header[n] = (unsigned char)zencode(pkeys, pcrc_32_tab, c, t); - } - /* Encrypt random header (last two bytes is high word of crc) */ - init_keys(passwd, pkeys, pcrc_32_tab); - for (n = 0; n < RAND_HEAD_LEN-2; n++) - { - buf[n] = (unsigned char)zencode(pkeys, pcrc_32_tab, header[n], t); - } - buf[n++] = (unsigned char)zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 16) & 0xff, t); - buf[n++] = (unsigned char)zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 24) & 0xff, t); - return n; -} - -#endif diff --git a/plugins/FTPFileYM/src/zip/ioapi.c b/plugins/FTPFileYM/src/zip/ioapi.c deleted file mode 100644 index 4219ed1f24..0000000000 --- a/plugins/FTPFileYM/src/zip/ioapi.c +++ /dev/null @@ -1,246 +0,0 @@ -/* ioapi.h -- IO base function header for compress/uncompress .zip - part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html ) - - Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html ) - - Modifications for Zip64 support - Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com ) - - For more info read MiniZip_info.txt - -*/ - -#if (defined(_WIN32) && !defined(_CRT_SECURE_NO_WARNINGS)) - #define _CRT_SECURE_NO_WARNINGS -#endif - -#include "ioapi.h" - -voidpf call_zopen64 (const zlib_filefunc64_32_def* pfilefunc,const void*filename,int mode) -{ - if (pfilefunc->zfile_func64.zopen64_file != NULL) - return (*(pfilefunc->zfile_func64.zopen64_file)) (pfilefunc->zfile_func64.opaque,filename,mode); - else - { - return (*(pfilefunc->zopen32_file))(pfilefunc->zfile_func64.opaque,(const TCHAR*)filename,mode); - } -} - -long call_zseek64 (const zlib_filefunc64_32_def* pfilefunc,voidpf filestream, ZPOS64_T offset, int origin) -{ - if (pfilefunc->zfile_func64.zseek64_file != NULL) - return (*(pfilefunc->zfile_func64.zseek64_file)) (pfilefunc->zfile_func64.opaque,filestream,offset,origin); - else - { - if (origin == ZLIB_FILEFUNC_SEEK_SET) - { - uLong offsetTruncated = (uLong)offset; - if (offsetTruncated != offset) - return -1; - else - return (*(pfilefunc->zseek32_file))(pfilefunc->zfile_func64.opaque,filestream,offsetTruncated,origin); - } - else - { - long offsetTruncated = (long)(__int64)offset; - if (offsetTruncated != (__int64)offset) - return -1; - else - return (*(pfilefunc->zseek32_file))(pfilefunc->zfile_func64.opaque,filestream,offsetTruncated,origin); - } - } -} - -ZPOS64_T call_ztell64 (const zlib_filefunc64_32_def* pfilefunc,voidpf filestream) -{ - if (pfilefunc->zfile_func64.zseek64_file != NULL) - return (*(pfilefunc->zfile_func64.ztell64_file)) (pfilefunc->zfile_func64.opaque,filestream); - else - { - uLong tell_uLong = (*(pfilefunc->ztell32_file))(pfilefunc->zfile_func64.opaque,filestream); - if ((tell_uLong) == ((uLong)-1)) - return (ZPOS64_T)-1; - else - return tell_uLong; - } -} - -void fill_zlib_filefunc64_32_def_from_filefunc32(zlib_filefunc64_32_def* p_filefunc64_32,const zlib_filefunc_def* p_filefunc32) -{ - p_filefunc64_32->zfile_func64.zopen64_file = NULL; - p_filefunc64_32->zopen32_file = p_filefunc32->zopen_file; - p_filefunc64_32->zfile_func64.zerror_file = p_filefunc32->zerror_file; - p_filefunc64_32->zfile_func64.zread_file = p_filefunc32->zread_file; - p_filefunc64_32->zfile_func64.zwrite_file = p_filefunc32->zwrite_file; - p_filefunc64_32->zfile_func64.ztell64_file = NULL; - p_filefunc64_32->zfile_func64.zseek64_file = NULL; - p_filefunc64_32->zfile_func64.zclose_file = p_filefunc32->zclose_file; - p_filefunc64_32->zfile_func64.zerror_file = p_filefunc32->zerror_file; - p_filefunc64_32->zfile_func64.opaque = p_filefunc32->opaque; - p_filefunc64_32->zseek32_file = p_filefunc32->zseek_file; - p_filefunc64_32->ztell32_file = p_filefunc32->ztell_file; -} - - - -static voidpf ZCALLBACK fopen_file_func OF((voidpf opaque, const TCHAR* filename, int mode)); -static uLong ZCALLBACK fread_file_func OF((voidpf opaque, voidpf stream, void* buf, uLong size)); -static uLong ZCALLBACK fwrite_file_func OF((voidpf opaque, voidpf stream, const void* buf,uLong size)); -static ZPOS64_T ZCALLBACK ftell64_file_func OF((voidpf opaque, voidpf stream)); -static long ZCALLBACK fseek64_file_func OF((voidpf opaque, voidpf stream, ZPOS64_T offset, int origin)); -static int ZCALLBACK fclose_file_func OF((voidpf opaque, voidpf stream)); -static int ZCALLBACK ferror_file_func OF((voidpf opaque, voidpf stream)); - -static voidpf ZCALLBACK fopen_file_func (voidpf opaque, const TCHAR* filename, int mode) -{ - FILE* file = NULL; - const TCHAR* mode_fopen = NULL; - if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ) - mode_fopen = _T("rb"); - else - if (mode & ZLIB_FILEFUNC_MODE_EXISTING) - mode_fopen = _T("r+b"); - else - if (mode & ZLIB_FILEFUNC_MODE_CREATE) - mode_fopen = _T("wb"); - - if ((filename!=NULL) && (mode_fopen != NULL)) - file = _tfopen(filename, mode_fopen); - return file; -} - -static voidpf ZCALLBACK fopen64_file_func (voidpf opaque, const void* filename, int mode) -{ - FILE* file = NULL; - const TCHAR* mode_fopen = NULL; - if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ) - mode_fopen = _T("rb"); - else - if (mode & ZLIB_FILEFUNC_MODE_EXISTING) - mode_fopen = _T("r+b"); - else - if (mode & ZLIB_FILEFUNC_MODE_CREATE) - mode_fopen = _T("wb"); - - if ((filename!=NULL) && (mode_fopen != NULL)) - file = _tfopen((const TCHAR*)filename, mode_fopen); - return file; -} - - -static uLong ZCALLBACK fread_file_func (voidpf opaque, voidpf stream, void* buf, uLong size) -{ - uLong ret; - ret = (uLong)fread(buf, 1, (size_t)size, (FILE *)stream); - return ret; -} - -static uLong ZCALLBACK fwrite_file_func (voidpf opaque, voidpf stream, const void* buf, uLong size) -{ - uLong ret; - ret = (uLong)fwrite(buf, 1, (size_t)size, (FILE *)stream); - return ret; -} - -static long ZCALLBACK ftell_file_func (voidpf opaque, voidpf stream) -{ - long ret; - ret = ftell((FILE *)stream); - return ret; -} - - -static ZPOS64_T ZCALLBACK ftell64_file_func (voidpf opaque, voidpf stream) -{ - ZPOS64_T ret; - ret = ftello64((FILE *)stream); - return ret; -} - -static long ZCALLBACK fseek_file_func (voidpf opaque, voidpf stream, uLong offset, int origin) -{ - int fseek_origin=0; - long ret; - switch (origin) - { - case ZLIB_FILEFUNC_SEEK_CUR : - fseek_origin = SEEK_CUR; - break; - case ZLIB_FILEFUNC_SEEK_END : - fseek_origin = SEEK_END; - break; - case ZLIB_FILEFUNC_SEEK_SET : - fseek_origin = SEEK_SET; - break; - default: return -1; - } - ret = 0; - if (fseek((FILE *)stream, offset, fseek_origin) != 0) - ret = -1; - return ret; -} - -static long ZCALLBACK fseek64_file_func (voidpf opaque, voidpf stream, ZPOS64_T offset, int origin) -{ - int fseek_origin=0; - long ret; - switch (origin) - { - case ZLIB_FILEFUNC_SEEK_CUR : - fseek_origin = SEEK_CUR; - break; - case ZLIB_FILEFUNC_SEEK_END : - fseek_origin = SEEK_END; - break; - case ZLIB_FILEFUNC_SEEK_SET : - fseek_origin = SEEK_SET; - break; - default: return -1; - } - ret = 0; - - if (fseeko64((FILE *)stream, offset, fseek_origin) != 0) - ret = -1; - - return ret; -} - - -static int ZCALLBACK fclose_file_func (voidpf opaque, voidpf stream) -{ - int ret; - ret = fclose((FILE *)stream); - return ret; -} - -static int ZCALLBACK ferror_file_func (voidpf opaque, voidpf stream) -{ - int ret; - ret = ferror((FILE *)stream); - return ret; -} - -void fill_fopen_filefunc (pzlib_filefunc_def) - zlib_filefunc_def* pzlib_filefunc_def; -{ - pzlib_filefunc_def->zopen_file = fopen_file_func; - pzlib_filefunc_def->zread_file = fread_file_func; - pzlib_filefunc_def->zwrite_file = fwrite_file_func; - pzlib_filefunc_def->ztell_file = ftell_file_func; - pzlib_filefunc_def->zseek_file = fseek_file_func; - pzlib_filefunc_def->zclose_file = fclose_file_func; - pzlib_filefunc_def->zerror_file = ferror_file_func; - pzlib_filefunc_def->opaque = NULL; -} - -void fill_fopen64_filefunc (zlib_filefunc64_def* pzlib_filefunc_def) -{ - pzlib_filefunc_def->zopen64_file = fopen64_file_func; - pzlib_filefunc_def->zread_file = fread_file_func; - pzlib_filefunc_def->zwrite_file = fwrite_file_func; - pzlib_filefunc_def->ztell64_file = ftell64_file_func; - pzlib_filefunc_def->zseek64_file = fseek64_file_func; - pzlib_filefunc_def->zclose_file = fclose_file_func; - pzlib_filefunc_def->zerror_file = ferror_file_func; - pzlib_filefunc_def->opaque = NULL; -} diff --git a/plugins/FTPFileYM/src/zip/ioapi.h b/plugins/FTPFileYM/src/zip/ioapi.h deleted file mode 100644 index 3fc4d0324b..0000000000 --- a/plugins/FTPFileYM/src/zip/ioapi.h +++ /dev/null @@ -1,201 +0,0 @@ -/* ioapi.h -- IO base function header for compress/uncompress .zip - part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html ) - - Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html ) - - Modifications for Zip64 support - Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com ) - - For more info read MiniZip_info.txt - - Changes - - Oct-2009 - Defined ZPOS64_T to fpos_t on windows and u_int64_t on linux. (might need to find a better why for this) - Oct-2009 - Change to fseeko64, ftello64 and fopen64 so large files would work on linux. - More if/def section may be needed to support other platforms - Oct-2009 - Defined fxxxx64 calls to normal fopen/ftell/fseek so they would compile on windows. - (but you should use iowin32.c for windows instead) - -*/ - -#ifndef _ZLIBIOAPI64_H -#define _ZLIBIOAPI64_H - -#if (!defined(_WIN32)) && (!defined(WIN32)) - - // Linux needs this to support file operation on files larger then 4+GB - // But might need better if/def to select just the platforms that needs them. - - #ifndef __USE_FILE_OFFSET64 - #define __USE_FILE_OFFSET64 - #endif - #ifndef __USE_LARGEFILE64 - #define __USE_LARGEFILE64 - #endif - #ifndef _LARGEFILE64_SOURCE - #define _LARGEFILE64_SOURCE - #endif - #ifndef _FILE_OFFSET_BIT - #define _FILE_OFFSET_BIT 64 - #endif -#endif - -#include -#include -#include -#include "zlib.h" - -#if defined(USE_FILE32API) -#define fopen64 fopen -#define ftello64 ftell -#define fseeko64 fseek -#else -#ifdef _MSC_VER - #define fopen64 fopen - #if (_MSC_VER >= 1400) && (!(defined(NO_MSCVER_FILE64_FUNC))) - #define ftello64 _ftelli64 - #define fseeko64 _fseeki64 - #else // old MSC - #define ftello64 ftell - #define fseeko64(a, b, c) fseek(a, (long)b, c) - #endif -#endif -#endif - -/* -#ifndef ZPOS64_T - #ifdef _WIN32 - #define ZPOS64_T fpos_t - #else - #include - #define ZPOS64_T uint64_t - #endif -#endif -*/ - -#ifdef HAVE_MINIZIP64_CONF_H -#include "mz64conf.h" -#endif - -/* a type choosen by DEFINE */ -#ifdef HAVE_64BIT_INT_CUSTOM -typedef 64BIT_INT_CUSTOM_TYPE ZPOS64_T; -#else -#ifdef HAS_STDINT_H -#include "stdint.h" -typedef uint64_t ZPOS64_T; -#else - - -#if defined(_MSC_VER) || defined(__BORLANDC__) -typedef unsigned __int64 ZPOS64_T; -#else -typedef unsigned long long int ZPOS64_T; -#endif -#endif -#endif - - - -#ifdef __cplusplus -extern "C" { -#endif - - -#define ZLIB_FILEFUNC_SEEK_CUR (1) -#define ZLIB_FILEFUNC_SEEK_END (2) -#define ZLIB_FILEFUNC_SEEK_SET (0) - -#define ZLIB_FILEFUNC_MODE_READ (1) -#define ZLIB_FILEFUNC_MODE_WRITE (2) -#define ZLIB_FILEFUNC_MODE_READWRITEFILTER (3) - -#define ZLIB_FILEFUNC_MODE_EXISTING (4) -#define ZLIB_FILEFUNC_MODE_CREATE (8) - - -#ifndef ZCALLBACK - #if (defined(WIN32) || defined(_WIN32) || defined (WINDOWS) || defined (_WINDOWS)) && defined(CALLBACK) && defined (USEWINDOWS_CALLBACK) - #define ZCALLBACK CALLBACK - #else - #define ZCALLBACK - #endif -#endif - - - - -typedef voidpf (ZCALLBACK *open_file_func) OF((voidpf opaque, const TCHAR* filename, int mode)); -typedef uLong (ZCALLBACK *read_file_func) OF((voidpf opaque, voidpf stream, void* buf, uLong size)); -typedef uLong (ZCALLBACK *write_file_func) OF((voidpf opaque, voidpf stream, const void* buf, uLong size)); -typedef int (ZCALLBACK *close_file_func) OF((voidpf opaque, voidpf stream)); -typedef int (ZCALLBACK *testerror_file_func) OF((voidpf opaque, voidpf stream)); - -typedef long (ZCALLBACK *tell_file_func) OF((voidpf opaque, voidpf stream)); -typedef long (ZCALLBACK *seek_file_func) OF((voidpf opaque, voidpf stream, uLong offset, int origin)); - - -/* here is the "old" 32 bits structure structure */ -typedef struct zlib_filefunc_def_s -{ - open_file_func zopen_file; - read_file_func zread_file; - write_file_func zwrite_file; - tell_file_func ztell_file; - seek_file_func zseek_file; - close_file_func zclose_file; - testerror_file_func zerror_file; - voidpf opaque; -} zlib_filefunc_def; - -typedef ZPOS64_T (ZCALLBACK *tell64_file_func) OF((voidpf opaque, voidpf stream)); -typedef long (ZCALLBACK *seek64_file_func) OF((voidpf opaque, voidpf stream, ZPOS64_T offset, int origin)); -typedef voidpf (ZCALLBACK *open64_file_func) OF((voidpf opaque, const void* filename, int mode)); - -typedef struct zlib_filefunc64_def_s -{ - open64_file_func zopen64_file; - read_file_func zread_file; - write_file_func zwrite_file; - tell64_file_func ztell64_file; - seek64_file_func zseek64_file; - close_file_func zclose_file; - testerror_file_func zerror_file; - voidpf opaque; -} zlib_filefunc64_def; - -void fill_fopen64_filefunc OF((zlib_filefunc64_def* pzlib_filefunc_def)); -void fill_fopen_filefunc OF((zlib_filefunc_def* pzlib_filefunc_def)); - -/* now internal definition, only for zip.c and unzip.h */ -typedef struct zlib_filefunc64_32_def_s -{ - zlib_filefunc64_def zfile_func64; - open_file_func zopen32_file; - tell_file_func ztell32_file; - seek_file_func zseek32_file; -} zlib_filefunc64_32_def; - - -#define ZREAD64(filefunc,filestream,buf,size) ((*((filefunc).zfile_func64.zread_file)) ((filefunc).zfile_func64.opaque,filestream,buf,size)) -#define ZWRITE64(filefunc,filestream,buf,size) ((*((filefunc).zfile_func64.zwrite_file)) ((filefunc).zfile_func64.opaque,filestream,buf,size)) -//#define ZTELL64(filefunc,filestream) ((*((filefunc).ztell64_file)) ((filefunc).opaque,filestream)) -//#define ZSEEK64(filefunc,filestream,pos,mode) ((*((filefunc).zseek64_file)) ((filefunc).opaque,filestream,pos,mode)) -#define ZCLOSE64(filefunc,filestream) ((*((filefunc).zfile_func64.zclose_file)) ((filefunc).zfile_func64.opaque,filestream)) -#define ZERROR64(filefunc,filestream) ((*((filefunc).zfile_func64.zerror_file)) ((filefunc).zfile_func64.opaque,filestream)) - -voidpf call_zopen64 OF((const zlib_filefunc64_32_def* pfilefunc,const void*filename,int mode)); -long call_zseek64 OF((const zlib_filefunc64_32_def* pfilefunc,voidpf filestream, ZPOS64_T offset, int origin)); -ZPOS64_T call_ztell64 OF((const zlib_filefunc64_32_def* pfilefunc,voidpf filestream)); - -void fill_zlib_filefunc64_32_def_from_filefunc32(zlib_filefunc64_32_def* p_filefunc64_32,const zlib_filefunc_def* p_filefunc32); - -#define ZOPEN64(filefunc,filename,mode) (call_zopen64((&(filefunc)),(filename),(mode))) -#define ZTELL64(filefunc,filestream) (call_ztell64((&(filefunc)),(filestream))) -#define ZSEEK64(filefunc,filestream,pos,mode) (call_zseek64((&(filefunc)),(filestream),(pos),(mode))) - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/plugins/FTPFileYM/src/zip/zconf.h b/plugins/FTPFileYM/src/zip/zconf.h deleted file mode 100644 index 02ce56c431..0000000000 --- a/plugins/FTPFileYM/src/zip/zconf.h +++ /dev/null @@ -1,428 +0,0 @@ -/* zconf.h -- configuration of the zlib compression library - * Copyright (C) 1995-2010 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* @(#) $Id$ */ - -#ifndef ZCONF_H -#define ZCONF_H - -/* - * If you *really* need a unique prefix for all types and library functions, - * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. - * Even better than compiling with -DZ_PREFIX would be to use configure to set - * this permanently in zconf.h using "./configure --zprefix". - */ -#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */ - -/* all linked symbols */ -# define _dist_code z__dist_code -# define _length_code z__length_code -# define _tr_align z__tr_align -# define _tr_flush_block z__tr_flush_block -# define _tr_init z__tr_init -# define _tr_stored_block z__tr_stored_block -# define _tr_tally z__tr_tally -# define adler32 z_adler32 -# define adler32_combine z_adler32_combine -# define adler32_combine64 z_adler32_combine64 -# define compress z_compress -# define compress2 z_compress2 -# define compressBound z_compressBound -# define crc32 z_crc32 -# define crc32_combine z_crc32_combine -# define crc32_combine64 z_crc32_combine64 -# define deflate z_deflate -# define deflateBound z_deflateBound -# define deflateCopy z_deflateCopy -# define deflateEnd z_deflateEnd -# define deflateInit2_ z_deflateInit2_ -# define deflateInit_ z_deflateInit_ -# define deflateParams z_deflateParams -# define deflatePrime z_deflatePrime -# define deflateReset z_deflateReset -# define deflateSetDictionary z_deflateSetDictionary -# define deflateSetHeader z_deflateSetHeader -# define deflateTune z_deflateTune -# define deflate_copyright z_deflate_copyright -# define get_crc_table z_get_crc_table -# define gz_error z_gz_error -# define gz_intmax z_gz_intmax -# define gz_strwinerror z_gz_strwinerror -# define gzbuffer z_gzbuffer -# define gzclearerr z_gzclearerr -# define gzclose z_gzclose -# define gzclose_r z_gzclose_r -# define gzclose_w z_gzclose_w -# define gzdirect z_gzdirect -# define gzdopen z_gzdopen -# define gzeof z_gzeof -# define gzerror z_gzerror -# define gzflush z_gzflush -# define gzgetc z_gzgetc -# define gzgets z_gzgets -# define gzoffset z_gzoffset -# define gzoffset64 z_gzoffset64 -# define gzopen z_gzopen -# define gzopen64 z_gzopen64 -# define gzprintf z_gzprintf -# define gzputc z_gzputc -# define gzputs z_gzputs -# define gzread z_gzread -# define gzrewind z_gzrewind -# define gzseek z_gzseek -# define gzseek64 z_gzseek64 -# define gzsetparams z_gzsetparams -# define gztell z_gztell -# define gztell64 z_gztell64 -# define gzungetc z_gzungetc -# define gzwrite z_gzwrite -# define inflate z_inflate -# define inflateBack z_inflateBack -# define inflateBackEnd z_inflateBackEnd -# define inflateBackInit_ z_inflateBackInit_ -# define inflateCopy z_inflateCopy -# define inflateEnd z_inflateEnd -# define inflateGetHeader z_inflateGetHeader -# define inflateInit2_ z_inflateInit2_ -# define inflateInit_ z_inflateInit_ -# define inflateMark z_inflateMark -# define inflatePrime z_inflatePrime -# define inflateReset z_inflateReset -# define inflateReset2 z_inflateReset2 -# define inflateSetDictionary z_inflateSetDictionary -# define inflateSync z_inflateSync -# define inflateSyncPoint z_inflateSyncPoint -# define inflateUndermine z_inflateUndermine -# define inflate_copyright z_inflate_copyright -# define inflate_fast z_inflate_fast -# define inflate_table z_inflate_table -# define uncompress z_uncompress -# define zError z_zError -# define zcalloc z_zcalloc -# define zcfree z_zcfree -# define zlibCompileFlags z_zlibCompileFlags -# define zlibVersion z_zlibVersion - -/* all zlib typedefs in zlib.h and zconf.h */ -# define Byte z_Byte -# define Bytef z_Bytef -# define alloc_func z_alloc_func -# define charf z_charf -# define free_func z_free_func -# define gzFile z_gzFile -# define gz_header z_gz_header -# define gz_headerp z_gz_headerp -# define in_func z_in_func -# define intf z_intf -# define out_func z_out_func -# define uInt z_uInt -# define uIntf z_uIntf -# define uLong z_uLong -# define uLongf z_uLongf -# define voidp z_voidp -# define voidpc z_voidpc -# define voidpf z_voidpf - -/* all zlib structs in zlib.h and zconf.h */ -# define gz_header_s z_gz_header_s -# define internal_state z_internal_state - -#endif - -#if defined(__MSDOS__) && !defined(MSDOS) -# define MSDOS -#endif -#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2) -# define OS2 -#endif -#if defined(_WINDOWS) && !defined(WINDOWS) -# define WINDOWS -#endif -#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) -# ifndef WIN32 -# define WIN32 -# endif -#endif -#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) -# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) -# ifndef SYS16BIT -# define SYS16BIT -# endif -# endif -#endif - -/* - * Compile with -DMAXSEG_64K if the alloc function cannot allocate more - * than 64k bytes at a time (needed on systems with 16-bit int). - */ -#ifdef SYS16BIT -# define MAXSEG_64K -#endif -#ifdef MSDOS -# define UNALIGNED_OK -#endif - -#ifdef __STDC_VERSION__ -# ifndef STDC -# define STDC -# endif -# if __STDC_VERSION__ >= 199901L -# ifndef STDC99 -# define STDC99 -# endif -# endif -#endif -#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus)) -# define STDC -#endif -#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__)) -# define STDC -#endif -#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32)) -# define STDC -#endif -#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__)) -# define STDC -#endif - -#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */ -# define STDC -#endif - -#ifndef STDC -# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ -# define const /* note: need a more gentle solution here */ -# endif -#endif - -/* Some Mac compilers merge all .h files incorrectly: */ -#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__) -# define NO_DUMMY_DECL -#endif - -/* Maximum value for memLevel in deflateInit2 */ -#ifndef MAX_MEM_LEVEL -# ifdef MAXSEG_64K -# define MAX_MEM_LEVEL 8 -# else -# define MAX_MEM_LEVEL 9 -# endif -#endif - -/* Maximum value for windowBits in deflateInit2 and inflateInit2. - * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files - * created by gzip. (Files created by minigzip can still be extracted by - * gzip.) - */ -#ifndef MAX_WBITS -# define MAX_WBITS 15 /* 32K LZ77 window */ -#endif - -/* The memory requirements for deflate are (in bytes): - (1 << (windowBits+2)) + (1 << (memLevel+9)) - that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) - plus a few kilobytes for small objects. For example, if you want to reduce - the default memory requirements from 256K to 128K, compile with - make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" - Of course this will generally degrade compression (there's no free lunch). - - The memory requirements for inflate are (in bytes) 1 << windowBits - that is, 32K for windowBits=15 (default value) plus a few kilobytes - for small objects. -*/ - - /* Type declarations */ - -#ifndef OF /* function prototypes */ -# ifdef STDC -# define OF(args) args -# else -# define OF(args) () -# endif -#endif - -/* The following definitions for FAR are needed only for MSDOS mixed - * model programming (small or medium model with some far allocations). - * This was tested only with MSC; for other MSDOS compilers you may have - * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, - * just define FAR to be empty. - */ -#ifdef SYS16BIT -# if defined(M_I86SM) || defined(M_I86MM) - /* MSC small or medium model */ -# define SMALL_MEDIUM -# ifdef _MSC_VER -# define FAR _far -# else -# define FAR far -# endif -# endif -# if (defined(__SMALL__) || defined(__MEDIUM__)) - /* Turbo C small or medium model */ -# define SMALL_MEDIUM -# ifdef __BORLANDC__ -# define FAR _far -# else -# define FAR far -# endif -# endif -#endif - -#if defined(WINDOWS) || defined(WIN32) - /* If building or using zlib as a DLL, define ZLIB_DLL. - * This is not mandatory, but it offers a little performance increase. - */ -# ifdef ZLIB_DLL -# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) -# ifdef ZLIB_INTERNAL -# define ZEXTERN extern __declspec(dllexport) -# else -# define ZEXTERN extern __declspec(dllimport) -# endif -# endif -# endif /* ZLIB_DLL */ - /* If building or using zlib with the WINAPI/WINAPIV calling convention, - * define ZLIB_WINAPI. - * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. - */ -# ifdef ZLIB_WINAPI -# ifdef FAR -# undef FAR -# endif -# include - /* No need for _export, use ZLIB.DEF instead. */ - /* For complete Windows compatibility, use WINAPI, not __stdcall. */ -# define ZEXPORT WINAPI -# ifdef WIN32 -# define ZEXPORTVA WINAPIV -# else -# define ZEXPORTVA FAR CDECL -# endif -# endif -#endif - -#if defined (__BEOS__) -# ifdef ZLIB_DLL -# ifdef ZLIB_INTERNAL -# define ZEXPORT __declspec(dllexport) -# define ZEXPORTVA __declspec(dllexport) -# else -# define ZEXPORT __declspec(dllimport) -# define ZEXPORTVA __declspec(dllimport) -# endif -# endif -#endif - -#ifndef ZEXTERN -# define ZEXTERN extern -#endif -#ifndef ZEXPORT -# define ZEXPORT -#endif -#ifndef ZEXPORTVA -# define ZEXPORTVA -#endif - -#ifndef FAR -# define FAR -#endif - -#if !defined(__MACTYPES__) -typedef unsigned char Byte; /* 8 bits */ -#endif -typedef unsigned int uInt; /* 16 bits or more */ -typedef unsigned long uLong; /* 32 bits or more */ - -#ifdef SMALL_MEDIUM - /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ -# define Bytef Byte FAR -#else - typedef Byte FAR Bytef; -#endif -typedef char FAR charf; -typedef int FAR intf; -typedef uInt FAR uIntf; -typedef uLong FAR uLongf; - -#ifdef STDC - typedef void const *voidpc; - typedef void FAR *voidpf; - typedef void *voidp; -#else - typedef Byte const *voidpc; - typedef Byte FAR *voidpf; - typedef Byte *voidp; -#endif - -#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */ -# define Z_HAVE_UNISTD_H -#endif - -#ifdef STDC -# include /* for off_t */ -#endif - -/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and - * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even - * though the former does not conform to the LFS document), but considering - * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as - * equivalently requesting no 64-bit operations - */ -#if -_LARGEFILE64_SOURCE - -1 == 1 -# undef _LARGEFILE64_SOURCE -#endif - -#if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE) -# include /* for SEEK_* and off_t */ -# ifdef VMS -# include /* for off_t */ -# endif -# ifndef z_off_t -# define z_off_t off_t -# endif -#endif - -#ifndef SEEK_SET -# define SEEK_SET 0 /* Seek from beginning of file. */ -# define SEEK_CUR 1 /* Seek from current position. */ -# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ -#endif - -#ifndef z_off_t -# define z_off_t long -#endif - -#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0 -# define z_off64_t off64_t -#else -# define z_off64_t z_off_t -#endif - -#if defined(__OS400__) -# define NO_vsnprintf -#endif - -#if defined(__MVS__) -# define NO_vsnprintf -#endif - -/* MVS linker does not support external names larger than 8 bytes */ -#if defined(__MVS__) - #pragma map(deflateInit_,"DEIN") - #pragma map(deflateInit2_,"DEIN2") - #pragma map(deflateEnd,"DEEND") - #pragma map(deflateBound,"DEBND") - #pragma map(inflateInit_,"ININ") - #pragma map(inflateInit2_,"ININ2") - #pragma map(inflateEnd,"INEND") - #pragma map(inflateSync,"INSY") - #pragma map(inflateSetDictionary,"INSEDI") - #pragma map(compressBound,"CMBND") - #pragma map(inflate_table,"INTABL") - #pragma map(inflate_fast,"INFA") - #pragma map(inflate_copyright,"INCOPY") -#endif - -#endif /* ZCONF_H */ diff --git a/plugins/FTPFileYM/src/zip/zip.c b/plugins/FTPFileYM/src/zip/zip.c deleted file mode 100644 index 3c34fc8bd4..0000000000 --- a/plugins/FTPFileYM/src/zip/zip.c +++ /dev/null @@ -1,2004 +0,0 @@ -/* zip.c -- IO on .zip files using zlib - Version 1.1, February 14h, 2010 - part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html ) - - Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html ) - - Modifications for Zip64 support - Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com ) - - For more info read MiniZip_info.txt - - Changes - Oct-2009 - Mathias Svensson - Remove old C style function prototypes - Oct-2009 - Mathias Svensson - Added Zip64 Support when creating new file archives - Oct-2009 - Mathias Svensson - Did some code cleanup and refactoring to get better overview of some functions. - Oct-2009 - Mathias Svensson - Added zipRemoveExtraInfoBlock to strip extra field data from its ZIP64 data - It is used when recreting zip archive with RAW when deleting items from a zip. - ZIP64 data is automaticly added to items that needs it, and existing ZIP64 data need to be removed. - Oct-2009 - Mathias Svensson - Added support for BZIP2 as compression mode (bzip2 lib is required) - Jan-2010 - back to unzip and minizip 1.0 name scheme, with compatibility layer - -*/ - - -#include -#include -#include -#include -#include "zlib.h" -#include "zip.h" - -#ifdef STDC -# include -# include -# include -#endif -#ifdef NO_ERRNO_H - extern int errno; -#else -# include -#endif - - -#ifndef local -# define local static -#endif -/* compile with -Dlocal if your debugger can't find static symbols */ - -#ifndef VERSIONMADEBY -# define VERSIONMADEBY (0x0) /* platform depedent */ -#endif - -#ifndef Z_BUFSIZE -#define Z_BUFSIZE (64*1024) //(16384) -#endif - -#ifndef Z_MAXFILENAMEINZIP -#define Z_MAXFILENAMEINZIP (256) -#endif - -#ifndef ALLOC -# define ALLOC(size) (malloc(size)) -#endif -#ifndef TRYFREE -# define TRYFREE(p) {if (p) free(p);} -#endif - -/* -#define SIZECENTRALDIRITEM (0x2e) -#define SIZEZIPLOCALHEADER (0x1e) -*/ - -/* I've found an old Unix (a SunOS 4.1.3_U1) without all SEEK_* defined.... */ - - -// NOT sure that this work on ALL platform -#define MAKEULONG64(a, b) ((ZPOS64_T)(((unsigned long)(a)) | ((ZPOS64_T)((unsigned long)(b))) << 32)) - -#ifndef SEEK_CUR -#define SEEK_CUR 1 -#endif - -#ifndef SEEK_END -#define SEEK_END 2 -#endif - -#ifndef SEEK_SET -#define SEEK_SET 0 -#endif - -#ifndef DEF_MEM_LEVEL -#if MAX_MEM_LEVEL >= 8 -# define DEF_MEM_LEVEL 8 -#else -# define DEF_MEM_LEVEL MAX_MEM_LEVEL -#endif -#endif -const char zip_copyright[] =" zip 1.01 Copyright 1998-2004 Gilles Vollant - http://www.winimage.com/zLibDll"; - - -#define SIZEDATA_INDATABLOCK (4096-(4*4)) - -#define LOCALHEADERMAGIC (0x04034b50) -#define CENTRALHEADERMAGIC (0x02014b50) -#define ENDHEADERMAGIC (0x06054b50) -#define ZIP64ENDHEADERMAGIC (0x6064b50) -#define ZIP64ENDLOCHEADERMAGIC (0x7064b50) - -#define FLAG_LOCALHEADER_OFFSET (0x06) -#define CRC_LOCALHEADER_OFFSET (0x0e) - -#define SIZECENTRALHEADER (0x2e) /* 46 */ - -typedef struct linkedlist_datablock_internal_s -{ - struct linkedlist_datablock_internal_s* next_datablock; - uLong avail_in_this_block; - uLong filled_in_this_block; - uLong unused; /* for future use and alignement */ - unsigned char data[SIZEDATA_INDATABLOCK]; -} linkedlist_datablock_internal; - -typedef struct linkedlist_data_s -{ - linkedlist_datablock_internal* first_block; - linkedlist_datablock_internal* last_block; -} linkedlist_data; - - -typedef struct -{ - z_stream stream; /* zLib stream structure for inflate */ -#ifdef HAVE_BZIP2 - bz_stream bstream; /* bzLib stream structure for bziped */ -#endif - - int stream_initialised; /* 1 is stream is initialised */ - uInt pos_in_buffered_data; /* last written byte in buffered_data */ - - ZPOS64_T pos_local_header; /* offset of the local header of the file - currenty writing */ - char* central_header; /* central header data for the current file */ - uLong size_centralExtra; - uLong size_centralheader; /* size of the central header for cur file */ - uLong size_centralExtraFree; /* Extra bytes allocated to the centralheader but that are not used */ - uLong flag; /* flag of the file currently writing */ - - int method; /* compression method of file currenty wr.*/ - int raw; /* 1 for directly writing raw data */ - Byte buffered_data[Z_BUFSIZE];/* buffer contain compressed data to be writ*/ - uLong dosDate; - uLong crc32; - int encrypt; - int zip64; /* Add ZIP64 extened information in the extra field */ - ZPOS64_T pos_zip64extrainfo; - ZPOS64_T totalCompressedData; - ZPOS64_T totalUncompressedData; -#ifndef NOCRYPT - unsigned long keys[3]; /* keys defining the pseudo-random sequence */ - const unsigned long* pcrc_32_tab; - int crypt_header_size; -#endif -} curfile64_info; - -typedef struct -{ - zlib_filefunc64_32_def z_filefunc; - voidpf filestream; /* io structore of the zipfile */ - linkedlist_data central_dir;/* datablock with central dir in construction*/ - int in_opened_file_inzip; /* 1 if a file in the zip is currently writ.*/ - curfile64_info ci; /* info on the file curretly writing */ - - ZPOS64_T begin_pos; /* position of the beginning of the zipfile */ - ZPOS64_T add_position_when_writting_offset; - ZPOS64_T number_entry; - -#ifndef NO_ADDFILEINEXISTINGZIP - char *globalcomment; -#endif - -} zip64_internal; - - -#ifndef NOCRYPT -#define INCLUDECRYPTINGCODE_IFCRYPTALLOWED -#include "crypt.h" -#endif - -local linkedlist_datablock_internal* allocate_new_datablock() -{ - linkedlist_datablock_internal* ldi; - ldi = (linkedlist_datablock_internal*) - ALLOC(sizeof(linkedlist_datablock_internal)); - if (ldi!=NULL) - { - ldi->next_datablock = NULL ; - ldi->filled_in_this_block = 0 ; - ldi->avail_in_this_block = SIZEDATA_INDATABLOCK ; - } - return ldi; -} - -local void free_datablock(linkedlist_datablock_internal* ldi) -{ - while (ldi!=NULL) - { - linkedlist_datablock_internal* ldinext = ldi->next_datablock; - TRYFREE(ldi); - ldi = ldinext; - } -} - -local void init_linkedlist(linkedlist_data* ll) -{ - ll->first_block = ll->last_block = NULL; -} - -local void free_linkedlist(linkedlist_data* ll) -{ - free_datablock(ll->first_block); - ll->first_block = ll->last_block = NULL; -} - - -local int add_data_in_datablock(linkedlist_data* ll, const void* buf, uLong len) -{ - linkedlist_datablock_internal* ldi; - const unsigned char* from_copy; - - if (ll==NULL) - return ZIP_INTERNALERROR; - - if (ll->last_block == NULL) - { - ll->first_block = ll->last_block = allocate_new_datablock(); - if (ll->first_block == NULL) - return ZIP_INTERNALERROR; - } - - ldi = ll->last_block; - from_copy = (unsigned char*)buf; - - while (len>0) - { - uInt copy_this; - uInt i; - unsigned char* to_copy; - - if (ldi->avail_in_this_block==0) - { - ldi->next_datablock = allocate_new_datablock(); - if (ldi->next_datablock == NULL) - return ZIP_INTERNALERROR; - ldi = ldi->next_datablock ; - ll->last_block = ldi; - } - - if (ldi->avail_in_this_block < len) - copy_this = (uInt)ldi->avail_in_this_block; - else - copy_this = (uInt)len; - - to_copy = &(ldi->data[ldi->filled_in_this_block]); - - for (i=0;ifilled_in_this_block += copy_this; - ldi->avail_in_this_block -= copy_this; - from_copy += copy_this ; - len -= copy_this; - } - return ZIP_OK; -} - - - -/****************************************************************************/ - -#ifndef NO_ADDFILEINEXISTINGZIP -/* =========================================================================== - Inputs a long in LSB order to the given file - nbByte == 1, 2 ,4 or 8 (byte, short or long, ZPOS64_T) -*/ - -local int zip64local_putValue OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, ZPOS64_T x, int nbByte)); -local int zip64local_putValue (const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, ZPOS64_T x, int nbByte) -{ - unsigned char buf[8]; - int n; - for (n = 0; n < nbByte; n++) - { - buf[n] = (unsigned char)(x & 0xff); - x >>= 8; - } - if (x != 0) - { /* data overflow - hack for ZIP64 (X Roche) */ - for (n = 0; n < nbByte; n++) - { - buf[n] = 0xff; - } - } - - if (ZWRITE64(*pzlib_filefunc_def,filestream,buf,nbByte)!=(uLong)nbByte) - return ZIP_ERRNO; - else - return ZIP_OK; -} - -local void zip64local_putValue_inmemory OF((void* dest, ZPOS64_T x, int nbByte)); -local void zip64local_putValue_inmemory (void* dest, ZPOS64_T x, int nbByte) -{ - unsigned char* buf=(unsigned char*)dest; - int n; - for (n = 0; n < nbByte; n++) { - buf[n] = (unsigned char)(x & 0xff); - x >>= 8; - } - - if (x != 0) - { /* data overflow - hack for ZIP64 */ - for (n = 0; n < nbByte; n++) - { - buf[n] = 0xff; - } - } -} - -/****************************************************************************/ - - -local uLong zip64local_TmzDateToDosDate(const tm_zip* ptm) -{ - uLong year = (uLong)ptm->tm_year; - if (year>=1980) - year-=1980; - else if (year>=80) - year-=80; - return - (uLong) (((ptm->tm_mday) + (32 * (ptm->tm_mon+1)) + (512 * year)) << 16) | - ((ptm->tm_sec/2) + (32* ptm->tm_min) + (2048 * (uLong)ptm->tm_hour)); -} - - -/****************************************************************************/ - -local int zip64local_getByte OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, int *pi)); - -local int zip64local_getByte(const zlib_filefunc64_32_def* pzlib_filefunc_def,voidpf filestream,int* pi) -{ - unsigned char c; - int err = (int)ZREAD64(*pzlib_filefunc_def,filestream,&c,1); - if (err==1) - { - *pi = (int)c; - return ZIP_OK; - } - else - { - if (ZERROR64(*pzlib_filefunc_def,filestream)) - return ZIP_ERRNO; - else - return ZIP_EOF; - } -} - - -/* =========================================================================== - Reads a long in LSB order from the given gz_stream. Sets -*/ -local int zip64local_getShort OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, uLong *pX)); - -local int zip64local_getShort (const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, uLong* pX) -{ - uLong x ; - int i = 0; - int err; - - err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); - x = (uLong)i; - - if (err==ZIP_OK) - err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); - x += ((uLong)i)<<8; - - if (err==ZIP_OK) - *pX = x; - else - *pX = 0; - return err; -} - -local int zip64local_getLong OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, uLong *pX)); - -local int zip64local_getLong (const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, uLong* pX) -{ - uLong x ; - int i = 0; - int err; - - err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); - x = (uLong)i; - - if (err==ZIP_OK) - err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); - x += ((uLong)i)<<8; - - if (err==ZIP_OK) - err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); - x += ((uLong)i)<<16; - - if (err==ZIP_OK) - err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); - x += ((uLong)i)<<24; - - if (err==ZIP_OK) - *pX = x; - else - *pX = 0; - return err; -} - -local int zip64local_getLong64 OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, ZPOS64_T *pX)); - - -local int zip64local_getLong64 (const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, ZPOS64_T *pX) -{ - ZPOS64_T x; - int i = 0; - int err; - - err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); - x = (ZPOS64_T)i; - - if (err==ZIP_OK) - err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); - x += ((ZPOS64_T)i)<<8; - - if (err==ZIP_OK) - err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); - x += ((ZPOS64_T)i)<<16; - - if (err==ZIP_OK) - err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); - x += ((ZPOS64_T)i)<<24; - - if (err==ZIP_OK) - err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); - x += ((ZPOS64_T)i)<<32; - - if (err==ZIP_OK) - err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); - x += ((ZPOS64_T)i)<<40; - - if (err==ZIP_OK) - err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); - x += ((ZPOS64_T)i)<<48; - - if (err==ZIP_OK) - err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); - x += ((ZPOS64_T)i)<<56; - - if (err==ZIP_OK) - *pX = x; - else - *pX = 0; - - return err; -} - -#ifndef BUFREADCOMMENT -#define BUFREADCOMMENT (0x400) -#endif -/* - Locate the Central directory of a zipfile (at the end, just before - the global comment) -*/ -local ZPOS64_T zip64local_SearchCentralDir OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream)); - -local ZPOS64_T zip64local_SearchCentralDir(const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream) -{ - unsigned char* buf; - ZPOS64_T uSizeFile; - ZPOS64_T uBackRead; - ZPOS64_T uMaxBack=0xffff; /* maximum size of global comment */ - ZPOS64_T uPosFound=0; - - if (ZSEEK64(*pzlib_filefunc_def,filestream,0,ZLIB_FILEFUNC_SEEK_END) != 0) - return 0; - - - uSizeFile = ZTELL64(*pzlib_filefunc_def,filestream); - - if (uMaxBack>uSizeFile) - uMaxBack = uSizeFile; - - buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4); - if (buf==NULL) - return 0; - - uBackRead = 4; - while (uBackReaduMaxBack) - uBackRead = uMaxBack; - else - uBackRead+=BUFREADCOMMENT; - uReadPos = uSizeFile-uBackRead ; - - uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ? - (BUFREADCOMMENT+4) : (uLong)(uSizeFile-uReadPos); - if (ZSEEK64(*pzlib_filefunc_def,filestream,uReadPos,ZLIB_FILEFUNC_SEEK_SET)!=0) - break; - - if (ZREAD64(*pzlib_filefunc_def,filestream,buf,uReadSize)!=uReadSize) - break; - - for (i=(int)uReadSize-3; (i--)>0;) - if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) && - ((*(buf+i+2))==0x05) && ((*(buf+i+3))==0x06)) - { - uPosFound = uReadPos+i; - break; - } - - if (uPosFound!=0) - break; - } - TRYFREE(buf); - return uPosFound; -} - -/* -Locate the End of Zip64 Central directory locator and from there find the CD of a zipfile (at the end, just before -the global comment) -*/ -local ZPOS64_T zip64local_SearchCentralDir64 OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream)); - -local ZPOS64_T zip64local_SearchCentralDir64(const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream) -{ - unsigned char* buf; - ZPOS64_T uSizeFile; - ZPOS64_T uBackRead; - ZPOS64_T uMaxBack=0xffff; /* maximum size of global comment */ - ZPOS64_T uPosFound=0; - uLong uL; - ZPOS64_T relativeOffset; - - if (ZSEEK64(*pzlib_filefunc_def,filestream,0,ZLIB_FILEFUNC_SEEK_END) != 0) - return 0; - - uSizeFile = ZTELL64(*pzlib_filefunc_def,filestream); - - if (uMaxBack>uSizeFile) - uMaxBack = uSizeFile; - - buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4); - if (buf==NULL) - return 0; - - uBackRead = 4; - while (uBackReaduMaxBack) - uBackRead = uMaxBack; - else - uBackRead+=BUFREADCOMMENT; - uReadPos = uSizeFile-uBackRead ; - - uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ? - (BUFREADCOMMENT+4) : (uLong)(uSizeFile-uReadPos); - if (ZSEEK64(*pzlib_filefunc_def,filestream,uReadPos,ZLIB_FILEFUNC_SEEK_SET)!=0) - break; - - if (ZREAD64(*pzlib_filefunc_def,filestream,buf,uReadSize)!=uReadSize) - break; - - for (i=(int)uReadSize-3; (i--)>0;) - { - // Signature "0x07064b50" Zip64 end of central directory locater - if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) && ((*(buf+i+2))==0x06) && ((*(buf+i+3))==0x07)) - { - uPosFound = uReadPos+i; - break; - } - } - - if (uPosFound!=0) - break; - } - - TRYFREE(buf); - if (uPosFound == 0) - return 0; - - /* Zip64 end of central directory locator */ - if (ZSEEK64(*pzlib_filefunc_def,filestream, uPosFound,ZLIB_FILEFUNC_SEEK_SET)!=0) - return 0; - - /* the signature, already checked */ - if (zip64local_getLong(pzlib_filefunc_def,filestream,&uL)!=ZIP_OK) - return 0; - - /* number of the disk with the start of the zip64 end of central directory */ - if (zip64local_getLong(pzlib_filefunc_def,filestream,&uL)!=ZIP_OK) - return 0; - if (uL != 0) - return 0; - - /* relative offset of the zip64 end of central directory record */ - if (zip64local_getLong64(pzlib_filefunc_def,filestream,&relativeOffset)!=ZIP_OK) - return 0; - - /* total number of disks */ - if (zip64local_getLong(pzlib_filefunc_def,filestream,&uL)!=ZIP_OK) - return 0; - if (uL != 1) - return 0; - - /* Goto Zip64 end of central directory record */ - if (ZSEEK64(*pzlib_filefunc_def,filestream, relativeOffset,ZLIB_FILEFUNC_SEEK_SET)!=0) - return 0; - - /* the signature */ - if (zip64local_getLong(pzlib_filefunc_def,filestream,&uL)!=ZIP_OK) - return 0; - - if (uL != 0x06064b50) // signature of 'Zip64 end of central directory' - return 0; - - return relativeOffset; -} - -int LoadCentralDirectoryRecord(zip64_internal* pziinit) -{ - int err=ZIP_OK; - ZPOS64_T byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/ - - ZPOS64_T size_central_dir; /* size of the central directory */ - ZPOS64_T offset_central_dir; /* offset of start of central directory */ - ZPOS64_T central_pos; - uLong uL; - - uLong number_disk; /* number of the current dist, used for - spaning ZIP, unsupported, always 0*/ - uLong number_disk_with_CD; /* number the the disk with central dir, used - for spaning ZIP, unsupported, always 0*/ - ZPOS64_T number_entry; - ZPOS64_T number_entry_CD; /* total number of entries in - the central dir - (same than number_entry on nospan) */ - uLong VersionMadeBy; - uLong VersionNeeded; - uLong size_comment; - - int hasZIP64Record = 0; - - // check first if we find a ZIP64 record - central_pos = zip64local_SearchCentralDir64(&pziinit->z_filefunc,pziinit->filestream); - if(central_pos > 0) - { - hasZIP64Record = 1; - } - else if(central_pos == 0) - { - central_pos = zip64local_SearchCentralDir(&pziinit->z_filefunc,pziinit->filestream); - } - -/* disable to allow appending to empty ZIP archive - if (central_pos==0) - err=ZIP_ERRNO; -*/ - - if(hasZIP64Record) - { - ZPOS64_T sizeEndOfCentralDirectory; - if (ZSEEK64(pziinit->z_filefunc, pziinit->filestream, central_pos, ZLIB_FILEFUNC_SEEK_SET) != 0) - err=ZIP_ERRNO; - - /* the signature, already checked */ - if (zip64local_getLong(&pziinit->z_filefunc, pziinit->filestream,&uL)!=ZIP_OK) - err=ZIP_ERRNO; - - /* size of zip64 end of central directory record */ - if (zip64local_getLong64(&pziinit->z_filefunc, pziinit->filestream, &sizeEndOfCentralDirectory)!=ZIP_OK) - err=ZIP_ERRNO; - - /* version made by */ - if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream, &VersionMadeBy)!=ZIP_OK) - err=ZIP_ERRNO; - - /* version needed to extract */ - if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream, &VersionNeeded)!=ZIP_OK) - err=ZIP_ERRNO; - - /* number of this disk */ - if (zip64local_getLong(&pziinit->z_filefunc, pziinit->filestream,&number_disk)!=ZIP_OK) - err=ZIP_ERRNO; - - /* number of the disk with the start of the central directory */ - if (zip64local_getLong(&pziinit->z_filefunc, pziinit->filestream,&number_disk_with_CD)!=ZIP_OK) - err=ZIP_ERRNO; - - /* total number of entries in the central directory on this disk */ - if (zip64local_getLong64(&pziinit->z_filefunc, pziinit->filestream, &number_entry)!=ZIP_OK) - err=ZIP_ERRNO; - - /* total number of entries in the central directory */ - if (zip64local_getLong64(&pziinit->z_filefunc, pziinit->filestream,&number_entry_CD)!=ZIP_OK) - err=ZIP_ERRNO; - - if ((number_entry_CD!=number_entry) || (number_disk_with_CD!=0) || (number_disk!=0)) - err=ZIP_BADZIPFILE; - - /* size of the central directory */ - if (zip64local_getLong64(&pziinit->z_filefunc, pziinit->filestream,&size_central_dir)!=ZIP_OK) - err=ZIP_ERRNO; - - /* offset of start of central directory with respect to the - starting disk number */ - if (zip64local_getLong64(&pziinit->z_filefunc, pziinit->filestream,&offset_central_dir)!=ZIP_OK) - err=ZIP_ERRNO; - - // TODO.. - // read the comment from the standard central header. - size_comment = 0; - } - else - { - // Read End of central Directory info - if (ZSEEK64(pziinit->z_filefunc, pziinit->filestream, central_pos,ZLIB_FILEFUNC_SEEK_SET)!=0) - err=ZIP_ERRNO; - - /* the signature, already checked */ - if (zip64local_getLong(&pziinit->z_filefunc, pziinit->filestream,&uL)!=ZIP_OK) - err=ZIP_ERRNO; - - /* number of this disk */ - if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream,&number_disk)!=ZIP_OK) - err=ZIP_ERRNO; - - /* number of the disk with the start of the central directory */ - if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream,&number_disk_with_CD)!=ZIP_OK) - err=ZIP_ERRNO; - - /* total number of entries in the central dir on this disk */ - number_entry = 0; - if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream, &uL)!=ZIP_OK) - err=ZIP_ERRNO; - else - number_entry = uL; - - /* total number of entries in the central dir */ - number_entry_CD = 0; - if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream, &uL)!=ZIP_OK) - err=ZIP_ERRNO; - else - number_entry_CD = uL; - - if ((number_entry_CD!=number_entry) || (number_disk_with_CD!=0) || (number_disk!=0)) - err=ZIP_BADZIPFILE; - - /* size of the central directory */ - size_central_dir = 0; - if (zip64local_getLong(&pziinit->z_filefunc, pziinit->filestream, &uL)!=ZIP_OK) - err=ZIP_ERRNO; - else - size_central_dir = uL; - - /* offset of start of central directory with respect to the starting disk number */ - offset_central_dir = 0; - if (zip64local_getLong(&pziinit->z_filefunc, pziinit->filestream, &uL)!=ZIP_OK) - err=ZIP_ERRNO; - else - offset_central_dir = uL; - - - /* zipfile global comment length */ - if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream, &size_comment)!=ZIP_OK) - err=ZIP_ERRNO; - } - - if ((central_posz_filefunc, pziinit->filestream); - return ZIP_ERRNO; - } - - if (size_comment>0) - { - pziinit->globalcomment = (char*)ALLOC(size_comment+1); - if (pziinit->globalcomment) - { - size_comment = ZREAD64(pziinit->z_filefunc, pziinit->filestream, pziinit->globalcomment,size_comment); - pziinit->globalcomment[size_comment]=0; - } - } - - byte_before_the_zipfile = central_pos - (offset_central_dir+size_central_dir); - pziinit->add_position_when_writting_offset = byte_before_the_zipfile; - - { - ZPOS64_T size_central_dir_to_read = size_central_dir; - size_t buf_size = SIZEDATA_INDATABLOCK; - void* buf_read = (void*)ALLOC(buf_size); - if (ZSEEK64(pziinit->z_filefunc, pziinit->filestream, offset_central_dir + byte_before_the_zipfile, ZLIB_FILEFUNC_SEEK_SET) != 0) - err=ZIP_ERRNO; - - while ((size_central_dir_to_read>0) && (err==ZIP_OK)) - { - ZPOS64_T read_this = SIZEDATA_INDATABLOCK; - if (read_this > size_central_dir_to_read) - read_this = size_central_dir_to_read; - - if (ZREAD64(pziinit->z_filefunc, pziinit->filestream,buf_read,(uLong)read_this) != read_this) - err=ZIP_ERRNO; - - if (err==ZIP_OK) - err = add_data_in_datablock(&pziinit->central_dir,buf_read, (uLong)read_this); - - size_central_dir_to_read-=read_this; - } - TRYFREE(buf_read); - } - pziinit->begin_pos = byte_before_the_zipfile; - pziinit->number_entry = number_entry_CD; - - if (ZSEEK64(pziinit->z_filefunc, pziinit->filestream, offset_central_dir+byte_before_the_zipfile,ZLIB_FILEFUNC_SEEK_SET) != 0) - err=ZIP_ERRNO; - - return err; -} - - -#endif /* !NO_ADDFILEINEXISTINGZIP*/ - - -/************************************************************/ -extern zipFile ZEXPORT zipOpen3 (const void *pathname, int append, zipcharpc* globalcomment, zlib_filefunc64_32_def* pzlib_filefunc64_32_def) -{ - zip64_internal ziinit; - zip64_internal* zi; - int err=ZIP_OK; - - ziinit.z_filefunc.zseek32_file = NULL; - ziinit.z_filefunc.ztell32_file = NULL; - if (pzlib_filefunc64_32_def==NULL) - fill_fopen64_filefunc(&ziinit.z_filefunc.zfile_func64); - else - ziinit.z_filefunc = *pzlib_filefunc64_32_def; - - ziinit.filestream = ZOPEN64(ziinit.z_filefunc, - pathname, - (append == APPEND_STATUS_CREATE) ? - (ZLIB_FILEFUNC_MODE_READ | ZLIB_FILEFUNC_MODE_WRITE | ZLIB_FILEFUNC_MODE_CREATE) : - (ZLIB_FILEFUNC_MODE_READ | ZLIB_FILEFUNC_MODE_WRITE | ZLIB_FILEFUNC_MODE_EXISTING)); - - if (ziinit.filestream == NULL) - return NULL; - - if (append == APPEND_STATUS_CREATEAFTER) - ZSEEK64(ziinit.z_filefunc,ziinit.filestream,0,SEEK_END); - - ziinit.begin_pos = ZTELL64(ziinit.z_filefunc,ziinit.filestream); - ziinit.in_opened_file_inzip = 0; - ziinit.ci.stream_initialised = 0; - ziinit.number_entry = 0; - ziinit.add_position_when_writting_offset = 0; - init_linkedlist(&(ziinit.central_dir)); - - - - zi = (zip64_internal*)ALLOC(sizeof(zip64_internal)); - if (zi==NULL) - { - ZCLOSE64(ziinit.z_filefunc,ziinit.filestream); - return NULL; - } - - /* now we add file in a zipfile */ -# ifndef NO_ADDFILEINEXISTINGZIP - ziinit.globalcomment = NULL; - if (append == APPEND_STATUS_ADDINZIP) - { - // Read and Cache Central Directory Records - err = LoadCentralDirectoryRecord(&ziinit); - } - - if (globalcomment) - { - *globalcomment = ziinit.globalcomment; - } -# endif /* !NO_ADDFILEINEXISTINGZIP*/ - - if (err != ZIP_OK) - { -# ifndef NO_ADDFILEINEXISTINGZIP - TRYFREE(ziinit.globalcomment); -# endif /* !NO_ADDFILEINEXISTINGZIP*/ - TRYFREE(zi); - return NULL; - } - else - { - *zi = ziinit; - return (zipFile)zi; - } -} - -extern zipFile ZEXPORT zipOpen2 (const char *pathname, int append, zipcharpc* globalcomment, zlib_filefunc_def* pzlib_filefunc32_def) -{ - if (pzlib_filefunc32_def != NULL) - { - zlib_filefunc64_32_def zlib_filefunc64_32_def_fill; - fill_zlib_filefunc64_32_def_from_filefunc32(&zlib_filefunc64_32_def_fill,pzlib_filefunc32_def); - return zipOpen3(pathname, append, globalcomment, &zlib_filefunc64_32_def_fill); - } - else - return zipOpen3(pathname, append, globalcomment, NULL); -} - -extern zipFile ZEXPORT zipOpen2_64 (const void *pathname, int append, zipcharpc* globalcomment, zlib_filefunc64_def* pzlib_filefunc_def) -{ - if (pzlib_filefunc_def != NULL) - { - zlib_filefunc64_32_def zlib_filefunc64_32_def_fill; - zlib_filefunc64_32_def_fill.zfile_func64 = *pzlib_filefunc_def; - zlib_filefunc64_32_def_fill.ztell32_file = NULL; - zlib_filefunc64_32_def_fill.zseek32_file = NULL; - return zipOpen3(pathname, append, globalcomment, &zlib_filefunc64_32_def_fill); - } - else - return zipOpen3(pathname, append, globalcomment, NULL); -} - - - -extern zipFile ZEXPORT zipOpen (const char* pathname, int append) -{ - return zipOpen3((const void*)pathname,append,NULL,NULL); -} - -extern zipFile ZEXPORT zipOpen64 (const void* pathname, int append) -{ - return zipOpen3(pathname,append,NULL,NULL); -} - -int Write_LocalFileHeader(zip64_internal* zi, const char* filename, uInt size_extrafield_local, const void* extrafield_local) -{ - /* write the local header */ - int err; - uInt size_filename = (uInt)strlen(filename); - uInt size_extrafield = size_extrafield_local; - - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)LOCALHEADERMAGIC, 4); - - if (err==ZIP_OK) - { - if(zi->ci.zip64) - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)45,2);/* version needed to extract */ - else - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)20,2);/* version needed to extract */ - } - - if (err==ZIP_OK) - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->ci.flag,2); - - if (err==ZIP_OK) - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->ci.method,2); - - if (err==ZIP_OK) - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->ci.dosDate,4); - - // CRC / Compressed size / Uncompressed size will be filled in later and rewritten later - if (err==ZIP_OK) - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); /* crc 32, unknown */ - if (err==ZIP_OK) - { - if(zi->ci.zip64) - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0xFFFFFFFF,4); /* compressed size, unknown */ - else - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); /* compressed size, unknown */ - } - if (err==ZIP_OK) - { - if(zi->ci.zip64) - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0xFFFFFFFF,4); /* uncompressed size, unknown */ - else - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); /* uncompressed size, unknown */ - } - - if (err==ZIP_OK) - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_filename,2); - - if(zi->ci.zip64) - { - size_extrafield += 20; - } - - if (err==ZIP_OK) - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_extrafield,2); - - if ((err==ZIP_OK) && (size_filename > 0)) - { - if (ZWRITE64(zi->z_filefunc,zi->filestream,filename,size_filename)!=size_filename) - err = ZIP_ERRNO; - } - - if ((err==ZIP_OK) && (size_extrafield_local > 0)) - { - if (ZWRITE64(zi->z_filefunc, zi->filestream, extrafield_local, size_extrafield_local) != size_extrafield_local) - err = ZIP_ERRNO; - } - - - if ((err==ZIP_OK) && (zi->ci.zip64)) - { - // write the Zip64 extended info - short HeaderID = 1; - short DataSize = 16; - ZPOS64_T CompressedSize = 0; - ZPOS64_T UncompressedSize = 0; - - // Remember position of Zip64 extended info for the local file header. (needed when we update size after done with file) - zi->ci.pos_zip64extrainfo = ZTELL64(zi->z_filefunc,zi->filestream); - - err = zip64local_putValue(&zi->z_filefunc, zi->filestream, (short)HeaderID,2); - err = zip64local_putValue(&zi->z_filefunc, zi->filestream, (short)DataSize,2); - - err = zip64local_putValue(&zi->z_filefunc, zi->filestream, (ZPOS64_T)UncompressedSize,8); - err = zip64local_putValue(&zi->z_filefunc, zi->filestream, (ZPOS64_T)CompressedSize,8); - } - - return err; -} - -/* - NOTE. - When writing RAW the ZIP64 extended information in extrafield_local and extrafield_global needs to be stripped - before calling this function it can be done with zipRemoveExtraInfoBlock - - It is not done here because then we need to realloc a new buffer since parameters are 'const' and I want to minimize - unnecessary allocations. - */ -extern int ZEXPORT zipOpenNewFileInZip4_64 (zipFile file, const char* filename, const zip_fileinfo* zipfi, - const void* extrafield_local, uInt size_extrafield_local, - const void* extrafield_global, uInt size_extrafield_global, - const char* comment, int method, int level, int raw, - int windowBits,int memLevel, int strategy, - const char* password, uLong crcForCrypting, - uLong versionMadeBy, uLong flagBase, int zip64) -{ - zip64_internal* zi; - uInt size_filename; - uInt size_comment; - uInt i; - int err = ZIP_OK; - -# ifdef NOCRYPT - if (password != NULL) - return ZIP_PARAMERROR; -# endif - - if (file == NULL) - return ZIP_PARAMERROR; - -#ifdef HAVE_BZIP2 - if ((method!=0) && (method!=Z_DEFLATED) && (method!=Z_BZIP2ED)) - return ZIP_PARAMERROR; -#else - if ((method!=0) && (method!=Z_DEFLATED)) - return ZIP_PARAMERROR; -#endif - - zi = (zip64_internal*)file; - - if (zi->in_opened_file_inzip == 1) - { - err = zipCloseFileInZip (file); - if (err != ZIP_OK) - return err; - } - - if (filename==NULL) - filename="-"; - - if (comment==NULL) - size_comment = 0; - else - size_comment = (uInt)strlen(comment); - - size_filename = (uInt)strlen(filename); - - if (zipfi == NULL) - zi->ci.dosDate = 0; - else - { - if (zipfi->dosDate != 0) - zi->ci.dosDate = zipfi->dosDate; - else - zi->ci.dosDate = zip64local_TmzDateToDosDate(&zipfi->tmz_date); - } - - zi->ci.flag = flagBase; - if ((level==8) || (level==9)) - zi->ci.flag |= 2; - if ((level==2)) - zi->ci.flag |= 4; - if ((level==1)) - zi->ci.flag |= 6; - if (password != NULL) - zi->ci.flag |= 1; - - zi->ci.crc32 = 0; - zi->ci.method = method; - zi->ci.encrypt = 0; - zi->ci.stream_initialised = 0; - zi->ci.pos_in_buffered_data = 0; - zi->ci.raw = raw; - zi->ci.pos_local_header = ZTELL64(zi->z_filefunc,zi->filestream); - - zi->ci.size_centralheader = SIZECENTRALHEADER + size_filename + size_extrafield_global + size_comment; - zi->ci.size_centralExtraFree = 32; // Extra space we have reserved in case we need to add ZIP64 extra info data - - zi->ci.central_header = (char*)ALLOC((uInt)zi->ci.size_centralheader + zi->ci.size_centralExtraFree); - - zi->ci.size_centralExtra = size_extrafield_global; - zip64local_putValue_inmemory(zi->ci.central_header,(uLong)CENTRALHEADERMAGIC,4); - /* version info */ - zip64local_putValue_inmemory(zi->ci.central_header+4,(uLong)versionMadeBy,2); - zip64local_putValue_inmemory(zi->ci.central_header+6,(uLong)20,2); - zip64local_putValue_inmemory(zi->ci.central_header+8,(uLong)zi->ci.flag,2); - zip64local_putValue_inmemory(zi->ci.central_header+10,(uLong)zi->ci.method,2); - zip64local_putValue_inmemory(zi->ci.central_header+12,(uLong)zi->ci.dosDate,4); - zip64local_putValue_inmemory(zi->ci.central_header+16,(uLong)0,4); /*crc*/ - zip64local_putValue_inmemory(zi->ci.central_header+20,(uLong)0,4); /*compr size*/ - zip64local_putValue_inmemory(zi->ci.central_header+24,(uLong)0,4); /*uncompr size*/ - zip64local_putValue_inmemory(zi->ci.central_header+28,(uLong)size_filename,2); - zip64local_putValue_inmemory(zi->ci.central_header+30,(uLong)size_extrafield_global,2); - zip64local_putValue_inmemory(zi->ci.central_header+32,(uLong)size_comment,2); - zip64local_putValue_inmemory(zi->ci.central_header+34,(uLong)0,2); /*disk nm start*/ - - if (zipfi==NULL) - zip64local_putValue_inmemory(zi->ci.central_header+36,(uLong)0,2); - else - zip64local_putValue_inmemory(zi->ci.central_header+36,(uLong)zipfi->internal_fa,2); - - if (zipfi==NULL) - zip64local_putValue_inmemory(zi->ci.central_header+38,(uLong)0,4); - else - zip64local_putValue_inmemory(zi->ci.central_header+38,(uLong)zipfi->external_fa,4); - - if(zi->ci.pos_local_header >= 0xffffffff) - zip64local_putValue_inmemory(zi->ci.central_header+42,(uLong)0xffffffff,4); - else - zip64local_putValue_inmemory(zi->ci.central_header+42,(uLong)zi->ci.pos_local_header - zi->add_position_when_writting_offset,4); - - for (i=0;ici.central_header+SIZECENTRALHEADER+i) = *(filename+i); - - for (i=0;ici.central_header+SIZECENTRALHEADER+size_filename+i) = - *(((const char*)extrafield_global)+i); - - for (i=0;ici.central_header+SIZECENTRALHEADER+size_filename+ - size_extrafield_global+i) = *(comment+i); - if (zi->ci.central_header == NULL) - return ZIP_INTERNALERROR; - - zi->ci.zip64 = zip64; - zi->ci.totalCompressedData = 0; - zi->ci.totalUncompressedData = 0; - zi->ci.pos_zip64extrainfo = 0; - - err = Write_LocalFileHeader(zi, filename, size_extrafield_local, extrafield_local); - -#ifdef HAVE_BZIP2 - zi->ci.bstream.avail_in = (uInt)0; - zi->ci.bstream.avail_out = (uInt)Z_BUFSIZE; - zi->ci.bstream.next_out = (char*)zi->ci.buffered_data; - zi->ci.bstream.total_in_hi32 = 0; - zi->ci.bstream.total_in_lo32 = 0; - zi->ci.bstream.total_out_hi32 = 0; - zi->ci.bstream.total_out_lo32 = 0; -#endif - - zi->ci.stream.avail_in = (uInt)0; - zi->ci.stream.avail_out = (uInt)Z_BUFSIZE; - zi->ci.stream.next_out = zi->ci.buffered_data; - zi->ci.stream.total_in = 0; - zi->ci.stream.total_out = 0; - zi->ci.stream.data_type = Z_BINARY; - -#ifdef HAVE_BZIP2 - if ((err==ZIP_OK) && (zi->ci.method == Z_DEFLATED || zi->ci.method == Z_BZIP2ED) && (!zi->ci.raw)) -#else - if ((err==ZIP_OK) && (zi->ci.method == Z_DEFLATED) && (!zi->ci.raw)) -#endif - { - if(zi->ci.method == Z_DEFLATED) - { - zi->ci.stream.zalloc = (alloc_func)0; - zi->ci.stream.zfree = (free_func)0; - zi->ci.stream.opaque = (voidpf)0; - - if (windowBits>0) - windowBits = -windowBits; - - err = deflateInit2(&zi->ci.stream, level, Z_DEFLATED, windowBits, memLevel, strategy); - - if (err==Z_OK) - zi->ci.stream_initialised = Z_DEFLATED; - } - else if(zi->ci.method == Z_BZIP2ED) - { -#ifdef HAVE_BZIP2 - // Init BZip stuff here - zi->ci.bstream.bzalloc = 0; - zi->ci.bstream.bzfree = 0; - zi->ci.bstream.opaque = (voidpf)0; - - err = BZ2_bzCompressInit(&zi->ci.bstream, level, 0,35); - if(err == BZ_OK) - zi->ci.stream_initialised = Z_BZIP2ED; -#endif - } - - } - -# ifndef NOCRYPT - zi->ci.crypt_header_size = 0; - if ((err==Z_OK) && (password != NULL)) - { - unsigned char bufHead[RAND_HEAD_LEN]; - unsigned int sizeHead; - zi->ci.encrypt = 1; - zi->ci.pcrc_32_tab = get_crc_table(); - /*init_keys(password,zi->ci.keys,zi->ci.pcrc_32_tab);*/ - - sizeHead=crypthead(password,bufHead,RAND_HEAD_LEN,zi->ci.keys,zi->ci.pcrc_32_tab,crcForCrypting); - zi->ci.crypt_header_size = sizeHead; - - if (ZWRITE64(zi->z_filefunc,zi->filestream,bufHead,sizeHead) != sizeHead) - err = ZIP_ERRNO; - } -# endif - - if (err==Z_OK) - zi->in_opened_file_inzip = 1; - return err; -} - -extern int ZEXPORT zipOpenNewFileInZip4 (zipFile file, const char* filename, const zip_fileinfo* zipfi, - const void* extrafield_local, uInt size_extrafield_local, - const void* extrafield_global, uInt size_extrafield_global, - const char* comment, int method, int level, int raw, - int windowBits,int memLevel, int strategy, - const char* password, uLong crcForCrypting, - uLong versionMadeBy, uLong flagBase) -{ - return zipOpenNewFileInZip4_64 (file, filename, zipfi, - extrafield_local, size_extrafield_local, - extrafield_global, size_extrafield_global, - comment, method, level, raw, - windowBits, memLevel, strategy, - password, crcForCrypting, versionMadeBy, flagBase, 0); -} - -extern int ZEXPORT zipOpenNewFileInZip3 (zipFile file, const char* filename, const zip_fileinfo* zipfi, - const void* extrafield_local, uInt size_extrafield_local, - const void* extrafield_global, uInt size_extrafield_global, - const char* comment, int method, int level, int raw, - int windowBits,int memLevel, int strategy, - const char* password, uLong crcForCrypting) -{ - return zipOpenNewFileInZip4_64 (file, filename, zipfi, - extrafield_local, size_extrafield_local, - extrafield_global, size_extrafield_global, - comment, method, level, raw, - windowBits, memLevel, strategy, - password, crcForCrypting, VERSIONMADEBY, 0, 0); -} - -extern int ZEXPORT zipOpenNewFileInZip3_64(zipFile file, const char* filename, const zip_fileinfo* zipfi, - const void* extrafield_local, uInt size_extrafield_local, - const void* extrafield_global, uInt size_extrafield_global, - const char* comment, int method, int level, int raw, - int windowBits,int memLevel, int strategy, - const char* password, uLong crcForCrypting, int zip64) -{ - return zipOpenNewFileInZip4_64 (file, filename, zipfi, - extrafield_local, size_extrafield_local, - extrafield_global, size_extrafield_global, - comment, method, level, raw, - windowBits, memLevel, strategy, - password, crcForCrypting, VERSIONMADEBY, 0, zip64); -} - -extern int ZEXPORT zipOpenNewFileInZip2(zipFile file, const char* filename, const zip_fileinfo* zipfi, - const void* extrafield_local, uInt size_extrafield_local, - const void* extrafield_global, uInt size_extrafield_global, - const char* comment, int method, int level, int raw) -{ - return zipOpenNewFileInZip4_64 (file, filename, zipfi, - extrafield_local, size_extrafield_local, - extrafield_global, size_extrafield_global, - comment, method, level, raw, - -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, - NULL, 0, VERSIONMADEBY, 0, 0); -} - -extern int ZEXPORT zipOpenNewFileInZip2_64(zipFile file, const char* filename, const zip_fileinfo* zipfi, - const void* extrafield_local, uInt size_extrafield_local, - const void* extrafield_global, uInt size_extrafield_global, - const char* comment, int method, int level, int raw, int zip64) -{ - return zipOpenNewFileInZip4_64 (file, filename, zipfi, - extrafield_local, size_extrafield_local, - extrafield_global, size_extrafield_global, - comment, method, level, raw, - -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, - NULL, 0, VERSIONMADEBY, 0, zip64); -} - -extern int ZEXPORT zipOpenNewFileInZip64 (zipFile file, const char* filename, const zip_fileinfo* zipfi, - const void* extrafield_local, uInt size_extrafield_local, - const void*extrafield_global, uInt size_extrafield_global, - const char* comment, int method, int level, int zip64) -{ - return zipOpenNewFileInZip4_64 (file, filename, zipfi, - extrafield_local, size_extrafield_local, - extrafield_global, size_extrafield_global, - comment, method, level, 0, - -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, - NULL, 0, VERSIONMADEBY, 0, zip64); -} - -extern int ZEXPORT zipOpenNewFileInZip (zipFile file, const char* filename, const zip_fileinfo* zipfi, - const void* extrafield_local, uInt size_extrafield_local, - const void*extrafield_global, uInt size_extrafield_global, - const char* comment, int method, int level) -{ - return zipOpenNewFileInZip4_64 (file, filename, zipfi, - extrafield_local, size_extrafield_local, - extrafield_global, size_extrafield_global, - comment, method, level, 0, - -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, - NULL, 0, VERSIONMADEBY, 0, 0); -} - -local int zip64FlushWriteBuffer(zip64_internal* zi) -{ - int err=ZIP_OK; - - if (zi->ci.encrypt != 0) - { -#ifndef NOCRYPT - uInt i; - int t; - for (i=0;ici.pos_in_buffered_data;i++) - zi->ci.buffered_data[i] = zencode(zi->ci.keys, zi->ci.pcrc_32_tab, zi->ci.buffered_data[i],t); -#endif - } - - if (ZWRITE64(zi->z_filefunc,zi->filestream,zi->ci.buffered_data,zi->ci.pos_in_buffered_data) != zi->ci.pos_in_buffered_data) - err = ZIP_ERRNO; - - zi->ci.totalCompressedData += zi->ci.pos_in_buffered_data; - -#ifdef HAVE_BZIP2 - if(zi->ci.method == Z_BZIP2ED) - { - zi->ci.totalUncompressedData += zi->ci.bstream.total_in_lo32; - zi->ci.bstream.total_in_lo32 = 0; - zi->ci.bstream.total_in_hi32 = 0; - } - else -#endif - { - zi->ci.totalUncompressedData += zi->ci.stream.total_in; - zi->ci.stream.total_in = 0; - } - - - zi->ci.pos_in_buffered_data = 0; - - return err; -} - -extern int ZEXPORT zipWriteInFileInZip (zipFile file,const void* buf,unsigned int len) -{ - zip64_internal* zi; - int err=ZIP_OK; - - if (file == NULL) - return ZIP_PARAMERROR; - zi = (zip64_internal*)file; - - if (zi->in_opened_file_inzip == 0) - return ZIP_PARAMERROR; - - zi->ci.crc32 = crc32(zi->ci.crc32,buf,(uInt)len); - -#ifdef HAVE_BZIP2 - if(zi->ci.method == Z_BZIP2ED && (!zi->ci.raw)) - { - zi->ci.bstream.next_in = (void*)buf; - zi->ci.bstream.avail_in = len; - err = BZ_RUN_OK; - - while ((err==BZ_RUN_OK) && (zi->ci.bstream.avail_in>0)) - { - if (zi->ci.bstream.avail_out == 0) - { - if (zip64FlushWriteBuffer(zi) == ZIP_ERRNO) - err = ZIP_ERRNO; - zi->ci.bstream.avail_out = (uInt)Z_BUFSIZE; - zi->ci.bstream.next_out = (char*)zi->ci.buffered_data; - } - - - if(err != BZ_RUN_OK) - break; - - if ((zi->ci.method == Z_BZIP2ED) && (!zi->ci.raw)) - { - uLong uTotalOutBefore_lo = zi->ci.bstream.total_out_lo32; -// uLong uTotalOutBefore_hi = zi->ci.bstream.total_out_hi32; - err=BZ2_bzCompress(&zi->ci.bstream, BZ_RUN); - - zi->ci.pos_in_buffered_data += (uInt)(zi->ci.bstream.total_out_lo32 - uTotalOutBefore_lo) ; - } - } - - if(err == BZ_RUN_OK) - err = ZIP_OK; - } - else -#endif - { - zi->ci.stream.next_in = (Bytef*)buf; - zi->ci.stream.avail_in = len; - - while ((err==ZIP_OK) && (zi->ci.stream.avail_in>0)) - { - if (zi->ci.stream.avail_out == 0) - { - if (zip64FlushWriteBuffer(zi) == ZIP_ERRNO) - err = ZIP_ERRNO; - zi->ci.stream.avail_out = (uInt)Z_BUFSIZE; - zi->ci.stream.next_out = zi->ci.buffered_data; - } - - - if(err != ZIP_OK) - break; - - if ((zi->ci.method == Z_DEFLATED) && (!zi->ci.raw)) - { - uLong uTotalOutBefore = zi->ci.stream.total_out; - err=deflate(&zi->ci.stream, Z_NO_FLUSH); - if(uTotalOutBefore > zi->ci.stream.total_out) - { - int bBreak = 0; - bBreak++; - } - - zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ; - } - else - { - uInt copy_this,i; - if (zi->ci.stream.avail_in < zi->ci.stream.avail_out) - copy_this = zi->ci.stream.avail_in; - else - copy_this = zi->ci.stream.avail_out; - - for (i = 0; i < copy_this; i++) - *(((char*)zi->ci.stream.next_out)+i) = - *(((const char*)zi->ci.stream.next_in)+i); - { - zi->ci.stream.avail_in -= copy_this; - zi->ci.stream.avail_out-= copy_this; - zi->ci.stream.next_in+= copy_this; - zi->ci.stream.next_out+= copy_this; - zi->ci.stream.total_in+= copy_this; - zi->ci.stream.total_out+= copy_this; - zi->ci.pos_in_buffered_data += copy_this; - } - } - }// while(...) - } - - return err; -} - -extern int ZEXPORT zipCloseFileInZipRaw (zipFile file, uLong uncompressed_size, uLong crc32) -{ - return zipCloseFileInZipRaw64 (file, uncompressed_size, crc32); -} - -extern int ZEXPORT zipCloseFileInZipRaw64 (zipFile file, ZPOS64_T uncompressed_size, uLong crc32) -{ - zip64_internal* zi; - ZPOS64_T compressed_size; - uLong invalidValue = 0xffffffff; - short datasize = 0; - int err=ZIP_OK; - - if (file == NULL) - return ZIP_PARAMERROR; - zi = (zip64_internal*)file; - - if (zi->in_opened_file_inzip == 0) - return ZIP_PARAMERROR; - zi->ci.stream.avail_in = 0; - - if ((zi->ci.method == Z_DEFLATED) && (!zi->ci.raw)) - { - while (err==ZIP_OK) - { - uLong uTotalOutBefore; - if (zi->ci.stream.avail_out == 0) - { - if (zip64FlushWriteBuffer(zi) == ZIP_ERRNO) - err = ZIP_ERRNO; - zi->ci.stream.avail_out = (uInt)Z_BUFSIZE; - zi->ci.stream.next_out = zi->ci.buffered_data; - } - uTotalOutBefore = zi->ci.stream.total_out; - err=deflate(&zi->ci.stream, Z_FINISH); - zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ; - } - } - else if ((zi->ci.method == Z_BZIP2ED) && (!zi->ci.raw)) - { -#ifdef HAVE_BZIP2 - err = BZ_FINISH_OK; - while (err==BZ_FINISH_OK) - { - uLong uTotalOutBefore; - if (zi->ci.bstream.avail_out == 0) - { - if (zip64FlushWriteBuffer(zi) == ZIP_ERRNO) - err = ZIP_ERRNO; - zi->ci.bstream.avail_out = (uInt)Z_BUFSIZE; - zi->ci.bstream.next_out = (char*)zi->ci.buffered_data; - } - uTotalOutBefore = zi->ci.bstream.total_out_lo32; - err=BZ2_bzCompress(&zi->ci.bstream, BZ_FINISH); - if(err == BZ_STREAM_END) - err = Z_STREAM_END; - - zi->ci.pos_in_buffered_data += (uInt)(zi->ci.bstream.total_out_lo32 - uTotalOutBefore); - } - - if(err == BZ_FINISH_OK) - err = ZIP_OK; -#endif - } - - if (err==Z_STREAM_END) - err=ZIP_OK; /* this is normal */ - - if ((zi->ci.pos_in_buffered_data>0) && (err==ZIP_OK)) - { - if (zip64FlushWriteBuffer(zi)==ZIP_ERRNO) - err = ZIP_ERRNO; - } - - if ((zi->ci.method == Z_DEFLATED) && (!zi->ci.raw)) - { - int tmp_err = deflateEnd(&zi->ci.stream); - if (err == ZIP_OK) - err = tmp_err; - zi->ci.stream_initialised = 0; - } -#ifdef HAVE_BZIP2 - else if((zi->ci.method == Z_BZIP2ED) && (!zi->ci.raw)) - { - int tmperr = BZ2_bzCompressEnd(&zi->ci.bstream); - if (err==ZIP_OK) - err = tmperr; - zi->ci.stream_initialised = 0; - } -#endif - - if (!zi->ci.raw) - { - crc32 = (uLong)zi->ci.crc32; - uncompressed_size = zi->ci.totalUncompressedData; - } - compressed_size = zi->ci.totalCompressedData; - -# ifndef NOCRYPT - compressed_size += zi->ci.crypt_header_size; -# endif - - // update Current Item crc and sizes, - if(compressed_size >= 0xffffffff || uncompressed_size >= 0xffffffff || zi->ci.pos_local_header >= 0xffffffff) - { - /*version Made by*/ - zip64local_putValue_inmemory(zi->ci.central_header+4,(uLong)45,2); - /*version needed*/ - zip64local_putValue_inmemory(zi->ci.central_header+6,(uLong)45,2); - - } - - zip64local_putValue_inmemory(zi->ci.central_header+16,crc32,4); /*crc*/ - - - if(compressed_size >= 0xffffffff) - zip64local_putValue_inmemory(zi->ci.central_header+20, invalidValue,4); /*compr size*/ - else - zip64local_putValue_inmemory(zi->ci.central_header+20, compressed_size,4); /*compr size*/ - - /// set internal file attributes field - if (zi->ci.stream.data_type == Z_ASCII) - zip64local_putValue_inmemory(zi->ci.central_header+36,(uLong)Z_ASCII,2); - - if(uncompressed_size >= 0xffffffff) - zip64local_putValue_inmemory(zi->ci.central_header+24, invalidValue,4); /*uncompr size*/ - else - zip64local_putValue_inmemory(zi->ci.central_header+24, uncompressed_size,4); /*uncompr size*/ - - // Add ZIP64 extra info field for uncompressed size - if(uncompressed_size >= 0xffffffff) - datasize += 8; - - // Add ZIP64 extra info field for compressed size - if(compressed_size >= 0xffffffff) - datasize += 8; - - // Add ZIP64 extra info field for relative offset to local file header of current file - if(zi->ci.pos_local_header >= 0xffffffff) - datasize += 8; - - if(datasize > 0) - { - char* p = NULL; - - if((uLong)(datasize + 4) > zi->ci.size_centralExtraFree) - { - // we can not write more data to the buffer that we have room for. - return ZIP_BADZIPFILE; - } - - p = zi->ci.central_header + zi->ci.size_centralheader; - - // Add Extra Information Header for 'ZIP64 information' - zip64local_putValue_inmemory(p, 0x0001, 2); // HeaderID - p += 2; - zip64local_putValue_inmemory(p, datasize, 2); // DataSize - p += 2; - - if(uncompressed_size >= 0xffffffff) - { - zip64local_putValue_inmemory(p, uncompressed_size, 8); - p += 8; - } - - if(compressed_size >= 0xffffffff) - { - zip64local_putValue_inmemory(p, compressed_size, 8); - p += 8; - } - - if(zi->ci.pos_local_header >= 0xffffffff) - { - zip64local_putValue_inmemory(p, zi->ci.pos_local_header, 8); - p += 8; - } - - // Update how much extra free space we got in the memory buffer - // and increase the centralheader size so the new ZIP64 fields are included - // ( 4 below is the size of HeaderID and DataSize field ) - zi->ci.size_centralExtraFree -= datasize + 4; - zi->ci.size_centralheader += datasize + 4; - - // Update the extra info size field - zi->ci.size_centralExtra += datasize + 4; - zip64local_putValue_inmemory(zi->ci.central_header+30,(uLong)zi->ci.size_centralExtra,2); - } - - if (err==ZIP_OK) - err = add_data_in_datablock(&zi->central_dir, zi->ci.central_header, (uLong)zi->ci.size_centralheader); - - free(zi->ci.central_header); - - if (err==ZIP_OK) - { - // Update the LocalFileHeader with the new values. - - ZPOS64_T cur_pos_inzip = ZTELL64(zi->z_filefunc,zi->filestream); - - if (ZSEEK64(zi->z_filefunc,zi->filestream, zi->ci.pos_local_header + 14,ZLIB_FILEFUNC_SEEK_SET)!=0) - err = ZIP_ERRNO; - - if (err==ZIP_OK) - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,crc32,4); /* crc 32, unknown */ - - if(uncompressed_size >= 0xffffffff) - { - if(zi->ci.pos_zip64extrainfo > 0) - { - // Update the size in the ZIP64 extended field. - if (ZSEEK64(zi->z_filefunc,zi->filestream, zi->ci.pos_zip64extrainfo + 4,ZLIB_FILEFUNC_SEEK_SET)!=0) - err = ZIP_ERRNO; - - if (err==ZIP_OK) /* compressed size, unknown */ - err = zip64local_putValue(&zi->z_filefunc, zi->filestream, uncompressed_size, 8); - - if (err==ZIP_OK) /* uncompressed size, unknown */ - err = zip64local_putValue(&zi->z_filefunc, zi->filestream, compressed_size, 8); - } - } - else - { - if (err==ZIP_OK) /* compressed size, unknown */ - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,compressed_size,4); - - if (err==ZIP_OK) /* uncompressed size, unknown */ - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,uncompressed_size,4); - } - - if (ZSEEK64(zi->z_filefunc,zi->filestream, cur_pos_inzip,ZLIB_FILEFUNC_SEEK_SET)!=0) - err = ZIP_ERRNO; - } - - zi->number_entry ++; - zi->in_opened_file_inzip = 0; - - return err; -} - -extern int ZEXPORT zipCloseFileInZip (zipFile file) -{ - return zipCloseFileInZipRaw (file,0,0); -} - -int Write_Zip64EndOfCentralDirectoryLocator(zip64_internal* zi, ZPOS64_T zip64eocd_pos_inzip) -{ - int err = ZIP_OK; - ZPOS64_T pos = zip64eocd_pos_inzip - zi->add_position_when_writting_offset; - - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)ZIP64ENDLOCHEADERMAGIC,4); - - /*num disks*/ - if (err==ZIP_OK) /* number of the disk with the start of the central directory */ - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); - - /*relative offset*/ - if (err==ZIP_OK) /* Relative offset to the Zip64EndOfCentralDirectory */ - err = zip64local_putValue(&zi->z_filefunc,zi->filestream, pos,8); - - /*total disks*/ /* Do not support spawning of disk so always say 1 here*/ - if (err==ZIP_OK) /* number of the disk with the start of the central directory */ - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)1,4); - - return err; -} - -int Write_Zip64EndOfCentralDirectoryRecord(zip64_internal* zi, uLong size_centraldir, ZPOS64_T centraldir_pos_inzip) -{ - int err = ZIP_OK; - - uLong Zip64DataSize = 44; - - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)ZIP64ENDHEADERMAGIC,4); - - if (err==ZIP_OK) /* size of this 'zip64 end of central directory' */ - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(ZPOS64_T)Zip64DataSize,8); // why ZPOS64_T of this ? - - if (err==ZIP_OK) /* version made by */ - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)45,2); - - if (err==ZIP_OK) /* version needed */ - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)45,2); - - if (err==ZIP_OK) /* number of this disk */ - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); - - if (err==ZIP_OK) /* number of the disk with the start of the central directory */ - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); - - if (err==ZIP_OK) /* total number of entries in the central dir on this disk */ - err = zip64local_putValue(&zi->z_filefunc, zi->filestream, zi->number_entry, 8); - - if (err==ZIP_OK) /* total number of entries in the central dir */ - err = zip64local_putValue(&zi->z_filefunc, zi->filestream, zi->number_entry, 8); - - if (err==ZIP_OK) /* size of the central directory */ - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(ZPOS64_T)size_centraldir,8); - - if (err==ZIP_OK) /* offset of start of central directory with respect to the starting disk number */ - { - ZPOS64_T pos = centraldir_pos_inzip - zi->add_position_when_writting_offset; - err = zip64local_putValue(&zi->z_filefunc,zi->filestream, (ZPOS64_T)pos,8); - } - return err; -} -int Write_EndOfCentralDirectoryRecord(zip64_internal* zi, uLong size_centraldir, ZPOS64_T centraldir_pos_inzip) -{ - int err = ZIP_OK; - - /*signature*/ - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)ENDHEADERMAGIC,4); - - if (err==ZIP_OK) /* number of this disk */ - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,2); - - if (err==ZIP_OK) /* number of the disk with the start of the central directory */ - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,2); - - if (err==ZIP_OK) /* total number of entries in the central dir on this disk */ - { - { - if(zi->number_entry >= 0xFFFF) - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0xffff,2); // use value in ZIP64 record - else - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->number_entry,2); - } - } - - if (err==ZIP_OK) /* total number of entries in the central dir */ - { - if(zi->number_entry >= 0xFFFF) - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0xffff,2); // use value in ZIP64 record - else - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->number_entry,2); - } - - if (err==ZIP_OK) /* size of the central directory */ - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_centraldir,4); - - if (err==ZIP_OK) /* offset of start of central directory with respect to the starting disk number */ - { - ZPOS64_T pos = centraldir_pos_inzip - zi->add_position_when_writting_offset; - if(pos >= 0xffffffff) - { - err = zip64local_putValue(&zi->z_filefunc,zi->filestream, (uLong)0xffffffff,4); - } - else - err = zip64local_putValue(&zi->z_filefunc,zi->filestream, (uLong)(centraldir_pos_inzip - zi->add_position_when_writting_offset),4); - } - - return err; -} - -int Write_GlobalComment(zip64_internal* zi, const char* global_comment) -{ - int err = ZIP_OK; - uInt size_global_comment = 0; - - if(global_comment != NULL) - size_global_comment = (uInt)strlen(global_comment); - - err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_global_comment,2); - - if (err == ZIP_OK && size_global_comment > 0) - { - if (ZWRITE64(zi->z_filefunc,zi->filestream, global_comment, size_global_comment) != size_global_comment) - err = ZIP_ERRNO; - } - return err; -} - -extern int ZEXPORT zipClose (zipFile file, const char* global_comment) -{ - zip64_internal* zi; - int err = 0; - uLong size_centraldir = 0; - ZPOS64_T centraldir_pos_inzip; - ZPOS64_T pos; - - if (file == NULL) - return ZIP_PARAMERROR; - - zi = (zip64_internal*)file; - - if (zi->in_opened_file_inzip == 1) - { - err = zipCloseFileInZip (file); - } - -#ifndef NO_ADDFILEINEXISTINGZIP - if (global_comment==NULL) - global_comment = zi->globalcomment; -#endif - - centraldir_pos_inzip = ZTELL64(zi->z_filefunc,zi->filestream); - - if (err==ZIP_OK) - { - linkedlist_datablock_internal* ldi = zi->central_dir.first_block; - while (ldi!=NULL) - { - if ((err==ZIP_OK) && (ldi->filled_in_this_block>0)) - { - if (ZWRITE64(zi->z_filefunc,zi->filestream, ldi->data, ldi->filled_in_this_block) != ldi->filled_in_this_block) - err = ZIP_ERRNO; - } - - size_centraldir += ldi->filled_in_this_block; - ldi = ldi->next_datablock; - } - } - free_linkedlist(&(zi->central_dir)); - - pos = centraldir_pos_inzip - zi->add_position_when_writting_offset; - if(pos >= 0xffffffff) - { - ZPOS64_T Zip64EOCDpos = ZTELL64(zi->z_filefunc,zi->filestream); - Write_Zip64EndOfCentralDirectoryRecord(zi, size_centraldir, centraldir_pos_inzip); - - Write_Zip64EndOfCentralDirectoryLocator(zi, Zip64EOCDpos); - } - - if (err==ZIP_OK) - err = Write_EndOfCentralDirectoryRecord(zi, size_centraldir, centraldir_pos_inzip); - - if(err == ZIP_OK) - err = Write_GlobalComment(zi, global_comment); - - if (ZCLOSE64(zi->z_filefunc,zi->filestream) != 0) - if (err == ZIP_OK) - err = ZIP_ERRNO; - -#ifndef NO_ADDFILEINEXISTINGZIP - TRYFREE(zi->globalcomment); -#endif - TRYFREE(zi); - - return err; -} - -extern int ZEXPORT zipRemoveExtraInfoBlock (char* pData, int* dataLen, short sHeader) -{ - char* p = pData; - int size = 0; - char* pNewHeader; - char* pTmp; - short header; - short dataSize; - - int retVal = ZIP_OK; - - if(pData == NULL || *dataLen < 4) - return ZIP_PARAMERROR; - - pNewHeader = (char*)ALLOC(*dataLen); - pTmp = pNewHeader; - - while(p < (pData + *dataLen)) - { - header = *(short*)p; - dataSize = *(((short*)p)+1); - - if( header == sHeader ) // Header found. - { - p += dataSize + 4; // skip it. do not copy to temp buffer - } - else - { - // Extra Info block should not be removed, So copy it to the temp buffer. - memcpy(pTmp, p, dataSize + 4); - p += dataSize + 4; - size += dataSize + 4; - } - - } - - if(size < *dataLen) - { - // clean old extra info block. - memset(pData,0, *dataLen); - - // copy the new extra info block over the old - if(size > 0) - memcpy(pData, pNewHeader, size); - - // set the new extra info size - *dataLen = size; - - retVal = ZIP_OK; - } - else - retVal = ZIP_ERRNO; - - TRYFREE(pNewHeader); - - return retVal; -} diff --git a/plugins/FTPFileYM/src/zip/zip.h b/plugins/FTPFileYM/src/zip/zip.h deleted file mode 100644 index 8aaebb6234..0000000000 --- a/plugins/FTPFileYM/src/zip/zip.h +++ /dev/null @@ -1,362 +0,0 @@ -/* zip.h -- IO on .zip files using zlib - Version 1.1, February 14h, 2010 - part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html ) - - Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html ) - - Modifications for Zip64 support - Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com ) - - For more info read MiniZip_info.txt - - --------------------------------------------------------------------------- - - Condition of use and distribution are the same than zlib : - - This software is provided 'as-is', without any express or implied - warranty. In no event will the authors be held liable for any damages - arising from the use of this software. - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute it - freely, subject to the following restrictions: - - 1. The origin of this software must not be misrepresented; you must not - claim that you wrote the original software. If you use this software - in a product, an acknowledgment in the product documentation would be - appreciated but is not required. - 2. Altered source versions must be plainly marked as such, and must not be - misrepresented as being the original software. - 3. This notice may not be removed or altered from any source distribution. - - --------------------------------------------------------------------------- - - Changes - - See header of zip.h - -*/ - -#ifndef _zip12_H -#define _zip12_H - -#ifdef __cplusplus -extern "C" { -#endif - -//#define HAVE_BZIP2 - -#ifndef _ZLIB_H -#include "zlib.h" -#endif - -#ifndef _ZLIBIOAPI_H -#include "ioapi.h" -#endif - -#ifdef HAVE_BZIP2 -#include "bzlib.h" -#endif - -#define Z_BZIP2ED 12 - -#if defined(STRICTZIP) || defined(STRICTZIPUNZIP) -/* like the STRICT of WIN32, we define a pointer that cannot be converted - from (void*) without cast */ -typedef struct TagzipFile__ { int unused; } zipFile__; -typedef zipFile__ *zipFile; -#else -typedef voidp zipFile; -#endif - -#define ZIP_OK (0) -#define ZIP_EOF (0) -#define ZIP_ERRNO (Z_ERRNO) -#define ZIP_PARAMERROR (-102) -#define ZIP_BADZIPFILE (-103) -#define ZIP_INTERNALERROR (-104) - -#ifndef DEF_MEM_LEVEL -# if MAX_MEM_LEVEL >= 8 -# define DEF_MEM_LEVEL 8 -# else -# define DEF_MEM_LEVEL MAX_MEM_LEVEL -# endif -#endif -/* default memLevel */ - -/* tm_zip contain date/time info */ -typedef struct tm_zip_s -{ - uInt tm_sec; /* seconds after the minute - [0,59] */ - uInt tm_min; /* minutes after the hour - [0,59] */ - uInt tm_hour; /* hours since midnight - [0,23] */ - uInt tm_mday; /* day of the month - [1,31] */ - uInt tm_mon; /* months since January - [0,11] */ - uInt tm_year; /* years - [1980..2044] */ -} tm_zip; - -typedef struct -{ - tm_zip tmz_date; /* date in understandable format */ - uLong dosDate; /* if dos_date == 0, tmu_date is used */ -/* uLong flag; */ /* general purpose bit flag 2 bytes */ - - uLong internal_fa; /* internal file attributes 2 bytes */ - uLong external_fa; /* external file attributes 4 bytes */ -} zip_fileinfo; - -typedef const char* zipcharpc; - - -#define APPEND_STATUS_CREATE (0) -#define APPEND_STATUS_CREATEAFTER (1) -#define APPEND_STATUS_ADDINZIP (2) - -extern zipFile ZEXPORT zipOpen OF((const char *pathname, int append)); -extern zipFile ZEXPORT zipOpen64 OF((const void *pathname, int append)); -/* - Create a zipfile. - pathname contain on Windows XP a filename like "c:\\zlib\\zlib113.zip" or on - an Unix computer "zlib/zlib113.zip". - if the file pathname exist and append==APPEND_STATUS_CREATEAFTER, the zip - will be created at the end of the file. - (useful if the file contain a self extractor code) - if the file pathname exist and append==APPEND_STATUS_ADDINZIP, we will - add files in existing zip (be sure you don't add file that doesn't exist) - If the zipfile cannot be opened, the return value is NULL. - Else, the return value is a zipFile Handle, usable with other function - of this zip package. -*/ - -/* Note : there is no delete function into a zipfile. - If you want delete file into a zipfile, you must open a zipfile, and create another - Of couse, you can use RAW reading and writing to copy the file you did not want delte -*/ - -extern zipFile ZEXPORT zipOpen2 OF((const char *pathname, - int append, - zipcharpc* globalcomment, - zlib_filefunc_def* pzlib_filefunc_def)); - -extern zipFile ZEXPORT zipOpen2_64 OF((const void *pathname, - int append, - zipcharpc* globalcomment, - zlib_filefunc64_def* pzlib_filefunc_def)); - -extern int ZEXPORT zipOpenNewFileInZip OF((zipFile file, - const char* filename, - const zip_fileinfo* zipfi, - const void* extrafield_local, - uInt size_extrafield_local, - const void* extrafield_global, - uInt size_extrafield_global, - const char* comment, - int method, - int level)); - -extern int ZEXPORT zipOpenNewFileInZip64 OF((zipFile file, - const char* filename, - const zip_fileinfo* zipfi, - const void* extrafield_local, - uInt size_extrafield_local, - const void* extrafield_global, - uInt size_extrafield_global, - const char* comment, - int method, - int level, - int zip64)); - -/* - Open a file in the ZIP for writing. - filename : the filename in zip (if NULL, '-' without quote will be used - *zipfi contain supplemental information - if extrafield_local!=NULL and size_extrafield_local>0, extrafield_local - contains the extrafield data the the local header - if extrafield_global!=NULL and size_extrafield_global>0, extrafield_global - contains the extrafield data the the local header - if comment != NULL, comment contain the comment string - method contain the compression method (0 for store, Z_DEFLATED for deflate) - level contain the level of compression (can be Z_DEFAULT_COMPRESSION) - zip64 is set to 1 if a zip64 extended information block should be added to the local file header. - this MUST be '1' if the uncompressed size is >= 0xffffffff. - -*/ - - -extern int ZEXPORT zipOpenNewFileInZip2 OF((zipFile file, - const char* filename, - const zip_fileinfo* zipfi, - const void* extrafield_local, - uInt size_extrafield_local, - const void* extrafield_global, - uInt size_extrafield_global, - const char* comment, - int method, - int level, - int raw)); - - -extern int ZEXPORT zipOpenNewFileInZip2_64 OF((zipFile file, - const char* filename, - const zip_fileinfo* zipfi, - const void* extrafield_local, - uInt size_extrafield_local, - const void* extrafield_global, - uInt size_extrafield_global, - const char* comment, - int method, - int level, - int raw, - int zip64)); -/* - Same than zipOpenNewFileInZip, except if raw=1, we write raw file - */ - -extern int ZEXPORT zipOpenNewFileInZip3 OF((zipFile file, - const char* filename, - const zip_fileinfo* zipfi, - const void* extrafield_local, - uInt size_extrafield_local, - const void* extrafield_global, - uInt size_extrafield_global, - const char* comment, - int method, - int level, - int raw, - int windowBits, - int memLevel, - int strategy, - const char* password, - uLong crcForCrypting)); - -extern int ZEXPORT zipOpenNewFileInZip3_64 OF((zipFile file, - const char* filename, - const zip_fileinfo* zipfi, - const void* extrafield_local, - uInt size_extrafield_local, - const void* extrafield_global, - uInt size_extrafield_global, - const char* comment, - int method, - int level, - int raw, - int windowBits, - int memLevel, - int strategy, - const char* password, - uLong crcForCrypting, - int zip64 - )); - -/* - Same than zipOpenNewFileInZip2, except - windowBits,memLevel,,strategy : see parameter strategy in deflateInit2 - password : crypting password (NULL for no crypting) - crcForCrypting : crc of file to compress (needed for crypting) - */ - -extern int ZEXPORT zipOpenNewFileInZip4 OF((zipFile file, - const char* filename, - const zip_fileinfo* zipfi, - const void* extrafield_local, - uInt size_extrafield_local, - const void* extrafield_global, - uInt size_extrafield_global, - const char* comment, - int method, - int level, - int raw, - int windowBits, - int memLevel, - int strategy, - const char* password, - uLong crcForCrypting, - uLong versionMadeBy, - uLong flagBase - )); - - -extern int ZEXPORT zipOpenNewFileInZip4_64 OF((zipFile file, - const char* filename, - const zip_fileinfo* zipfi, - const void* extrafield_local, - uInt size_extrafield_local, - const void* extrafield_global, - uInt size_extrafield_global, - const char* comment, - int method, - int level, - int raw, - int windowBits, - int memLevel, - int strategy, - const char* password, - uLong crcForCrypting, - uLong versionMadeBy, - uLong flagBase, - int zip64 - )); -/* - Same than zipOpenNewFileInZip4, except - versionMadeBy : value for Version made by field - flag : value for flag field (compression level info will be added) - */ - - -extern int ZEXPORT zipWriteInFileInZip OF((zipFile file, - const void* buf, - unsigned len)); -/* - Write data in the zipfile -*/ - -extern int ZEXPORT zipCloseFileInZip OF((zipFile file)); -/* - Close the current file in the zipfile -*/ - -extern int ZEXPORT zipCloseFileInZipRaw OF((zipFile file, - uLong uncompressed_size, - uLong crc32)); - -extern int ZEXPORT zipCloseFileInZipRaw64 OF((zipFile file, - ZPOS64_T uncompressed_size, - uLong crc32)); - -/* - Close the current file in the zipfile, for file opened with - parameter raw=1 in zipOpenNewFileInZip2 - uncompressed_size and crc32 are value for the uncompressed size -*/ - -extern int ZEXPORT zipClose OF((zipFile file, - const char* global_comment)); -/* - Close the zipfile -*/ - - -extern int ZEXPORT zipRemoveExtraInfoBlock OF((char* pData, int* dataLen, short sHeader)); -/* - zipRemoveExtraInfoBlock - Added by Mathias Svensson - - Remove extra information block from a extra information data for the local file header or central directory header - - It is needed to remove ZIP64 extra information blocks when before data is written if using RAW mode. - - 0x0001 is the signature header for the ZIP64 extra information blocks - - usage. - Remove ZIP64 Extra information from a central director extra field data - zipRemoveExtraInfoBlock(pCenDirExtraFieldData, &nCenDirExtraFieldDataLen, 0x0001); - - Remove ZIP64 Extra information from a Local File Header extra field data - zipRemoveExtraInfoBlock(pLocalHeaderExtraFieldData, &nLocalHeaderExtraFieldDataLen, 0x0001); -*/ - -#ifdef __cplusplus -} -#endif - -#endif /* _zip64_H */ diff --git a/plugins/FTPFileYM/src/zip/zlib.h b/plugins/FTPFileYM/src/zip/zlib.h deleted file mode 100644 index bfbba83e8e..0000000000 --- a/plugins/FTPFileYM/src/zip/zlib.h +++ /dev/null @@ -1,1613 +0,0 @@ -/* zlib.h -- interface of the 'zlib' general purpose compression library - version 1.2.5, April 19th, 2010 - - Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler - - This software is provided 'as-is', without any express or implied - warranty. In no event will the authors be held liable for any damages - arising from the use of this software. - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute it - freely, subject to the following restrictions: - - 1. The origin of this software must not be misrepresented; you must not - claim that you wrote the original software. If you use this software - in a product, an acknowledgment in the product documentation would be - appreciated but is not required. - 2. Altered source versions must be plainly marked as such, and must not be - misrepresented as being the original software. - 3. This notice may not be removed or altered from any source distribution. - - Jean-loup Gailly Mark Adler - jloup@gzip.org madler@alumni.caltech.edu - - - The data format used by the zlib library is described by RFCs (Request for - Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt - (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format). -*/ - -#ifndef ZLIB_H -#define ZLIB_H - -#include "zconf.h" - -#ifdef __cplusplus -extern "C" { -#endif - -#define ZLIB_VERSION "1.2.5" -#define ZLIB_VERNUM 0x1250 -#define ZLIB_VER_MAJOR 1 -#define ZLIB_VER_MINOR 2 -#define ZLIB_VER_REVISION 5 -#define ZLIB_VER_SUBREVISION 0 - -/* - The 'zlib' compression library provides in-memory compression and - decompression functions, including integrity checks of the uncompressed data. - This version of the library supports only one compression method (deflation) - but other algorithms will be added later and will have the same stream - interface. - - Compression can be done in a single step if the buffers are large enough, - or can be done by repeated calls of the compression function. In the latter - case, the application must provide more input and/or consume the output - (providing more output space) before each call. - - The compressed data format used by default by the in-memory functions is - the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped - around a deflate stream, which is itself documented in RFC 1951. - - The library also supports reading and writing files in gzip (.gz) format - with an interface similar to that of stdio using the functions that start - with "gz". The gzip format is different from the zlib format. gzip is a - gzip wrapper, documented in RFC 1952, wrapped around a deflate stream. - - This library can optionally read and write gzip streams in memory as well. - - The zlib format was designed to be compact and fast for use in memory - and on communications channels. The gzip format was designed for single- - file compression on file systems, has a larger header than zlib to maintain - directory information, and uses a different, slower check method than zlib. - - The library does not install any signal handler. The decoder checks - the consistency of the compressed data, so the library should never crash - even in case of corrupted input. -*/ - -typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); -typedef void (*free_func) OF((voidpf opaque, voidpf address)); - -struct internal_state; - -typedef struct z_stream_s { - Bytef *next_in; /* next input byte */ - uInt avail_in; /* number of bytes available at next_in */ - uLong total_in; /* total nb of input bytes read so far */ - - Bytef *next_out; /* next output byte should be put there */ - uInt avail_out; /* remaining free space at next_out */ - uLong total_out; /* total nb of bytes output so far */ - - char *msg; /* last error message, NULL if no error */ - struct internal_state FAR *state; /* not visible by applications */ - - alloc_func zalloc; /* used to allocate the internal state */ - free_func zfree; /* used to free the internal state */ - voidpf opaque; /* private data object passed to zalloc and zfree */ - - int data_type; /* best guess about the data type: binary or text */ - uLong adler; /* adler32 value of the uncompressed data */ - uLong reserved; /* reserved for future use */ -} z_stream; - -typedef z_stream FAR *z_streamp; - -/* - gzip header information passed to and from zlib routines. See RFC 1952 - for more details on the meanings of these fields. -*/ -typedef struct gz_header_s { - int text; /* true if compressed data believed to be text */ - uLong time; /* modification time */ - int xflags; /* extra flags (not used when writing a gzip file) */ - int os; /* operating system */ - Bytef *extra; /* pointer to extra field or Z_NULL if none */ - uInt extra_len; /* extra field length (valid if extra != Z_NULL) */ - uInt extra_max; /* space at extra (only when reading header) */ - Bytef *name; /* pointer to zero-terminated file name or Z_NULL */ - uInt name_max; /* space at name (only when reading header) */ - Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */ - uInt comm_max; /* space at comment (only when reading header) */ - int hcrc; /* true if there was or will be a header crc */ - int done; /* true when done reading gzip header (not used - when writing a gzip file) */ -} gz_header; - -typedef gz_header FAR *gz_headerp; - -/* - The application must update next_in and avail_in when avail_in has dropped - to zero. It must update next_out and avail_out when avail_out has dropped - to zero. The application must initialize zalloc, zfree and opaque before - calling the init function. All other fields are set by the compression - library and must not be updated by the application. - - The opaque value provided by the application will be passed as the first - parameter for calls of zalloc and zfree. This can be useful for custom - memory management. The compression library attaches no meaning to the - opaque value. - - zalloc must return Z_NULL if there is not enough memory for the object. - If zlib is used in a multi-threaded application, zalloc and zfree must be - thread safe. - - On 16-bit systems, the functions zalloc and zfree must be able to allocate - exactly 65536 bytes, but will not be required to allocate more than this if - the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, pointers - returned by zalloc for objects of exactly 65536 bytes *must* have their - offset normalized to zero. The default allocation function provided by this - library ensures this (see zutil.c). To reduce memory requirements and avoid - any allocation of 64K objects, at the expense of compression ratio, compile - the library with -DMAX_WBITS=14 (see zconf.h). - - The fields total_in and total_out can be used for statistics or progress - reports. After compression, total_in holds the total size of the - uncompressed data and may be saved for use in the decompressor (particularly - if the decompressor wants to decompress everything in a single step). -*/ - - /* constants */ - -#define Z_NO_FLUSH 0 -#define Z_PARTIAL_FLUSH 1 -#define Z_SYNC_FLUSH 2 -#define Z_FULL_FLUSH 3 -#define Z_FINISH 4 -#define Z_BLOCK 5 -#define Z_TREES 6 -/* Allowed flush values; see deflate() and inflate() below for details */ - -#define Z_OK 0 -#define Z_STREAM_END 1 -#define Z_NEED_DICT 2 -#define Z_ERRNO (-1) -#define Z_STREAM_ERROR (-2) -#define Z_DATA_ERROR (-3) -#define Z_MEM_ERROR (-4) -#define Z_BUF_ERROR (-5) -#define Z_VERSION_ERROR (-6) -/* Return codes for the compression/decompression functions. Negative values - * are errors, positive values are used for special but normal events. - */ - -#define Z_NO_COMPRESSION 0 -#define Z_BEST_SPEED 1 -#define Z_BEST_COMPRESSION 9 -#define Z_DEFAULT_COMPRESSION (-1) -/* compression levels */ - -#define Z_FILTERED 1 -#define Z_HUFFMAN_ONLY 2 -#define Z_RLE 3 -#define Z_FIXED 4 -#define Z_DEFAULT_STRATEGY 0 -/* compression strategy; see deflateInit2() below for details */ - -#define Z_BINARY 0 -#define Z_TEXT 1 -#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */ -#define Z_UNKNOWN 2 -/* Possible values of the data_type field (though see inflate()) */ - -#define Z_DEFLATED 8 -/* The deflate compression method (the only one supported in this version) */ - -#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ - -#define zlib_version zlibVersion() -/* for compatibility with versions < 1.0.2 */ - - - /* basic functions */ - -ZEXTERN const char * ZEXPORT zlibVersion OF((void)); -/* The application can compare zlibVersion and ZLIB_VERSION for consistency. - If the first character differs, the library code actually used is not - compatible with the zlib.h header file used by the application. This check - is automatically made by deflateInit and inflateInit. - */ - -/* -ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level)); - - Initializes the internal stream state for compression. The fields - zalloc, zfree and opaque must be initialized before by the caller. If - zalloc and zfree are set to Z_NULL, deflateInit updates them to use default - allocation functions. - - The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: - 1 gives best speed, 9 gives best compression, 0 gives no compression at all - (the input data is simply copied a block at a time). Z_DEFAULT_COMPRESSION - requests a default compromise between speed and compression (currently - equivalent to level 6). - - deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_STREAM_ERROR if level is not a valid compression level, or - Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible - with the version assumed by the caller (ZLIB_VERSION). msg is set to null - if there is no error message. deflateInit does not perform any compression: - this will be done by deflate(). -*/ - - -ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush)); -/* - deflate compresses as much data as possible, and stops when the input - buffer becomes empty or the output buffer becomes full. It may introduce - some output latency (reading input without producing any output) except when - forced to flush. - - The detailed semantics are as follows. deflate performs one or both of the - following actions: - - - Compress more input starting at next_in and update next_in and avail_in - accordingly. If not all input can be processed (because there is not - enough room in the output buffer), next_in and avail_in are updated and - processing will resume at this point for the next call of deflate(). - - - Provide more output starting at next_out and update next_out and avail_out - accordingly. This action is forced if the parameter flush is non zero. - Forcing flush frequently degrades the compression ratio, so this parameter - should be set only when necessary (in interactive applications). Some - output may be provided even if flush is not set. - - Before the call of deflate(), the application should ensure that at least - one of the actions is possible, by providing more input and/or consuming more - output, and updating avail_in or avail_out accordingly; avail_out should - never be zero before the call. The application can consume the compressed - output when it wants, for example when the output buffer is full (avail_out - == 0), or after each call of deflate(). If deflate returns Z_OK and with - zero avail_out, it must be called again after making room in the output - buffer because there might be more output pending. - - Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to - decide how much data to accumulate before producing output, in order to - maximize compression. - - If the parameter flush is set to Z_SYNC_FLUSH, all pending output is - flushed to the output buffer and the output is aligned on a byte boundary, so - that the decompressor can get all input data available so far. (In - particular avail_in is zero after the call if enough output space has been - provided before the call.) Flushing may degrade compression for some - compression algorithms and so it should be used only when necessary. This - completes the current deflate block and follows it with an empty stored block - that is three bits plus filler bits to the next byte, followed by four bytes - (00 00 ff ff). - - If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the - output buffer, but the output is not aligned to a byte boundary. All of the - input data so far will be available to the decompressor, as for Z_SYNC_FLUSH. - This completes the current deflate block and follows it with an empty fixed - codes block that is 10 bits long. This assures that enough bytes are output - in order for the decompressor to finish the block before the empty fixed code - block. - - If flush is set to Z_BLOCK, a deflate block is completed and emitted, as - for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to - seven bits of the current block are held to be written as the next byte after - the next deflate block is completed. In this case, the decompressor may not - be provided enough bits at this point in order to complete decompression of - the data provided so far to the compressor. It may need to wait for the next - block to be emitted. This is for advanced applications that need to control - the emission of deflate blocks. - - If flush is set to Z_FULL_FLUSH, all output is flushed as with - Z_SYNC_FLUSH, and the compression state is reset so that decompression can - restart from this point if previous compressed data has been damaged or if - random access is desired. Using Z_FULL_FLUSH too often can seriously degrade - compression. - - If deflate returns with avail_out == 0, this function must be called again - with the same value of the flush parameter and more output space (updated - avail_out), until the flush is complete (deflate returns with non-zero - avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that - avail_out is greater than six to avoid repeated flush markers due to - avail_out == 0 on return. - - If the parameter flush is set to Z_FINISH, pending input is processed, - pending output is flushed and deflate returns with Z_STREAM_END if there was - enough output space; if deflate returns with Z_OK, this function must be - called again with Z_FINISH and more output space (updated avail_out) but no - more input data, until it returns with Z_STREAM_END or an error. After - deflate has returned Z_STREAM_END, the only possible operations on the stream - are deflateReset or deflateEnd. - - Z_FINISH can be used immediately after deflateInit if all the compression - is to be done in a single step. In this case, avail_out must be at least the - value returned by deflateBound (see below). If deflate does not return - Z_STREAM_END, then it must be called again as described above. - - deflate() sets strm->adler to the adler32 checksum of all input read - so far (that is, total_in bytes). - - deflate() may update strm->data_type if it can make a good guess about - the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered - binary. This field is only for information purposes and does not affect the - compression algorithm in any manner. - - deflate() returns Z_OK if some progress has been made (more input - processed or more output produced), Z_STREAM_END if all input has been - consumed and all output has been produced (only when flush is set to - Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example - if next_in or next_out was Z_NULL), Z_BUF_ERROR if no progress is possible - (for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not - fatal, and deflate() can be called again with more input and more output - space to continue compressing. -*/ - - -ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm)); -/* - All dynamically allocated data structures for this stream are freed. - This function discards any unprocessed input and does not flush any pending - output. - - deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the - stream state was inconsistent, Z_DATA_ERROR if the stream was freed - prematurely (some input or output was discarded). In the error case, msg - may be set but then points to a static string (which must not be - deallocated). -*/ - - -/* -ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm)); - - Initializes the internal stream state for decompression. The fields - next_in, avail_in, zalloc, zfree and opaque must be initialized before by - the caller. If next_in is not Z_NULL and avail_in is large enough (the - exact value depends on the compression method), inflateInit determines the - compression method from the zlib header and allocates all data structures - accordingly; otherwise the allocation will be deferred to the first call of - inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to - use default allocation functions. - - inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_VERSION_ERROR if the zlib library version is incompatible with the - version assumed by the caller, or Z_STREAM_ERROR if the parameters are - invalid, such as a null pointer to the structure. msg is set to null if - there is no error message. inflateInit does not perform any decompression - apart from possibly reading the zlib header if present: actual decompression - will be done by inflate(). (So next_in and avail_in may be modified, but - next_out and avail_out are unused and unchanged.) The current implementation - of inflateInit() does not process any header information -- that is deferred - until inflate() is called. -*/ - - -ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); -/* - inflate decompresses as much data as possible, and stops when the input - buffer becomes empty or the output buffer becomes full. It may introduce - some output latency (reading input without producing any output) except when - forced to flush. - - The detailed semantics are as follows. inflate performs one or both of the - following actions: - - - Decompress more input starting at next_in and update next_in and avail_in - accordingly. If not all input can be processed (because there is not - enough room in the output buffer), next_in is updated and processing will - resume at this point for the next call of inflate(). - - - Provide more output starting at next_out and update next_out and avail_out - accordingly. inflate() provides as much output as possible, until there is - no more input data or no more space in the output buffer (see below about - the flush parameter). - - Before the call of inflate(), the application should ensure that at least - one of the actions is possible, by providing more input and/or consuming more - output, and updating the next_* and avail_* values accordingly. The - application can consume the uncompressed output when it wants, for example - when the output buffer is full (avail_out == 0), or after each call of - inflate(). If inflate returns Z_OK and with zero avail_out, it must be - called again after making room in the output buffer because there might be - more output pending. - - The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH, - Z_BLOCK, or Z_TREES. Z_SYNC_FLUSH requests that inflate() flush as much - output as possible to the output buffer. Z_BLOCK requests that inflate() - stop if and when it gets to the next deflate block boundary. When decoding - the zlib or gzip format, this will cause inflate() to return immediately - after the header and before the first block. When doing a raw inflate, - inflate() will go ahead and process the first block, and will return when it - gets to the end of that block, or when it runs out of data. - - The Z_BLOCK option assists in appending to or combining deflate streams. - Also to assist in this, on return inflate() will set strm->data_type to the - number of unused bits in the last byte taken from strm->next_in, plus 64 if - inflate() is currently decoding the last block in the deflate stream, plus - 128 if inflate() returned immediately after decoding an end-of-block code or - decoding the complete header up to just before the first byte of the deflate - stream. The end-of-block will not be indicated until all of the uncompressed - data from that block has been written to strm->next_out. The number of - unused bits may in general be greater than seven, except when bit 7 of - data_type is set, in which case the number of unused bits will be less than - eight. data_type is set as noted here every time inflate() returns for all - flush options, and so can be used to determine the amount of currently - consumed input in bits. - - The Z_TREES option behaves as Z_BLOCK does, but it also returns when the - end of each deflate block header is reached, before any actual data in that - block is decoded. This allows the caller to determine the length of the - deflate block header for later use in random access within a deflate block. - 256 is added to the value of strm->data_type when inflate() returns - immediately after reaching the end of the deflate block header. - - inflate() should normally be called until it returns Z_STREAM_END or an - error. However if all decompression is to be performed in a single step (a - single call of inflate), the parameter flush should be set to Z_FINISH. In - this case all pending input is processed and all pending output is flushed; - avail_out must be large enough to hold all the uncompressed data. (The size - of the uncompressed data may have been saved by the compressor for this - purpose.) The next operation on this stream must be inflateEnd to deallocate - the decompression state. The use of Z_FINISH is never required, but can be - used to inform inflate that a faster approach may be used for the single - inflate() call. - - In this implementation, inflate() always flushes as much output as - possible to the output buffer, and always uses the faster approach on the - first call. So the only effect of the flush parameter in this implementation - is on the return value of inflate(), as noted below, or when it returns early - because Z_BLOCK or Z_TREES is used. - - If a preset dictionary is needed after this call (see inflateSetDictionary - below), inflate sets strm->adler to the adler32 checksum of the dictionary - chosen by the compressor and returns Z_NEED_DICT; otherwise it sets - strm->adler to the adler32 checksum of all output produced so far (that is, - total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described - below. At the end of the stream, inflate() checks that its computed adler32 - checksum is equal to that saved by the compressor and returns Z_STREAM_END - only if the checksum is correct. - - inflate() can decompress and check either zlib-wrapped or gzip-wrapped - deflate data. The header type is detected automatically, if requested when - initializing with inflateInit2(). Any information contained in the gzip - header is not retained, so applications that need that information should - instead use raw inflate, see inflateInit2() below, or inflateBack() and - perform their own processing of the gzip header and trailer. - - inflate() returns Z_OK if some progress has been made (more input processed - or more output produced), Z_STREAM_END if the end of the compressed data has - been reached and all uncompressed output has been produced, Z_NEED_DICT if a - preset dictionary is needed at this point, Z_DATA_ERROR if the input data was - corrupted (input stream not conforming to the zlib format or incorrect check - value), Z_STREAM_ERROR if the stream structure was inconsistent (for example - next_in or next_out was Z_NULL), Z_MEM_ERROR if there was not enough memory, - Z_BUF_ERROR if no progress is possible or if there was not enough room in the - output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and - inflate() can be called again with more input and more output space to - continue decompressing. If Z_DATA_ERROR is returned, the application may - then call inflateSync() to look for a good compression block if a partial - recovery of the data is desired. -*/ - - -ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm)); -/* - All dynamically allocated data structures for this stream are freed. - This function discards any unprocessed input and does not flush any pending - output. - - inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state - was inconsistent. In the error case, msg may be set but then points to a - static string (which must not be deallocated). -*/ - - - /* Advanced functions */ - -/* - The following functions are needed only in some special applications. -*/ - -/* -ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm, - int level, - int method, - int windowBits, - int memLevel, - int strategy)); - - This is another version of deflateInit with more compression options. The - fields next_in, zalloc, zfree and opaque must be initialized before by the - caller. - - The method parameter is the compression method. It must be Z_DEFLATED in - this version of the library. - - The windowBits parameter is the base two logarithm of the window size - (the size of the history buffer). It should be in the range 8..15 for this - version of the library. Larger values of this parameter result in better - compression at the expense of memory usage. The default value is 15 if - deflateInit is used instead. - - windowBits can also be -8..-15 for raw deflate. In this case, -windowBits - determines the window size. deflate() will then generate raw deflate data - with no zlib header or trailer, and will not compute an adler32 check value. - - windowBits can also be greater than 15 for optional gzip encoding. Add - 16 to windowBits to write a simple gzip header and trailer around the - compressed data instead of a zlib wrapper. The gzip header will have no - file name, no extra data, no comment, no modification time (set to zero), no - header crc, and the operating system will be set to 255 (unknown). If a - gzip stream is being written, strm->adler is a crc32 instead of an adler32. - - The memLevel parameter specifies how much memory should be allocated - for the internal compression state. memLevel=1 uses minimum memory but is - slow and reduces compression ratio; memLevel=9 uses maximum memory for - optimal speed. The default value is 8. See zconf.h for total memory usage - as a function of windowBits and memLevel. - - The strategy parameter is used to tune the compression algorithm. Use the - value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a - filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no - string match), or Z_RLE to limit match distances to one (run-length - encoding). Filtered data consists mostly of small values with a somewhat - random distribution. In this case, the compression algorithm is tuned to - compress them better. The effect of Z_FILTERED is to force more Huffman - coding and less string matching; it is somewhat intermediate between - Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as - fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data. The - strategy parameter only affects the compression ratio but not the - correctness of the compressed output even if it is not set appropriately. - Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler - decoder for special applications. - - deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid - method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is - incompatible with the version assumed by the caller (ZLIB_VERSION). msg is - set to null if there is no error message. deflateInit2 does not perform any - compression: this will be done by deflate(). -*/ - -ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm, - const Bytef *dictionary, - uInt dictLength)); -/* - Initializes the compression dictionary from the given byte sequence - without producing any compressed output. This function must be called - immediately after deflateInit, deflateInit2 or deflateReset, before any call - of deflate. The compressor and decompressor must use exactly the same - dictionary (see inflateSetDictionary). - - The dictionary should consist of strings (byte sequences) that are likely - to be encountered later in the data to be compressed, with the most commonly - used strings preferably put towards the end of the dictionary. Using a - dictionary is most useful when the data to be compressed is short and can be - predicted with good accuracy; the data can then be compressed better than - with the default empty dictionary. - - Depending on the size of the compression data structures selected by - deflateInit or deflateInit2, a part of the dictionary may in effect be - discarded, for example if the dictionary is larger than the window size - provided in deflateInit or deflateInit2. Thus the strings most likely to be - useful should be put at the end of the dictionary, not at the front. In - addition, the current implementation of deflate will use at most the window - size minus 262 bytes of the provided dictionary. - - Upon return of this function, strm->adler is set to the adler32 value - of the dictionary; the decompressor may later use this value to determine - which dictionary has been used by the compressor. (The adler32 value - applies to the whole dictionary even if only a subset of the dictionary is - actually used by the compressor.) If a raw deflate was requested, then the - adler32 value is not computed and strm->adler is not set. - - deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a - parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is - inconsistent (for example if deflate has already been called for this stream - or if the compression method is bsort). deflateSetDictionary does not - perform any compression: this will be done by deflate(). -*/ - -ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest, - z_streamp source)); -/* - Sets the destination stream as a complete copy of the source stream. - - This function can be useful when several compression strategies will be - tried, for example when there are several ways of pre-processing the input - data with a filter. The streams that will be discarded should then be freed - by calling deflateEnd. Note that deflateCopy duplicates the internal - compression state which can be quite large, so this strategy is slow and can - consume lots of memory. - - deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_STREAM_ERROR if the source stream state was inconsistent - (such as zalloc being Z_NULL). msg is left unchanged in both source and - destination. -*/ - -ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm)); -/* - This function is equivalent to deflateEnd followed by deflateInit, - but does not free and reallocate all the internal compression state. The - stream will keep the same compression level and any other attributes that - may have been set by deflateInit2. - - deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent (such as zalloc or state being Z_NULL). -*/ - -ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm, - int level, - int strategy)); -/* - Dynamically update the compression level and compression strategy. The - interpretation of level and strategy is as in deflateInit2. This can be - used to switch between compression and straight copy of the input data, or - to switch to a different kind of input data requiring a different strategy. - If the compression level is changed, the input available so far is - compressed with the old level (and may be flushed); the new level will take - effect only at the next call of deflate(). - - Before the call of deflateParams, the stream state must be set as for - a call of deflate(), since the currently available input may have to be - compressed and flushed. In particular, strm->avail_out must be non-zero. - - deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source - stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR if - strm->avail_out was zero. -*/ - -ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm, - int good_length, - int max_lazy, - int nice_length, - int max_chain)); -/* - Fine tune deflate's internal compression parameters. This should only be - used by someone who understands the algorithm used by zlib's deflate for - searching for the best matching string, and even then only by the most - fanatic optimizer trying to squeeze out the last compressed bit for their - specific input data. Read the deflate.c source code for the meaning of the - max_lazy, good_length, nice_length, and max_chain parameters. - - deflateTune() can be called after deflateInit() or deflateInit2(), and - returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream. - */ - -ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm, - uLong sourceLen)); -/* - deflateBound() returns an upper bound on the compressed size after - deflation of sourceLen bytes. It must be called after deflateInit() or - deflateInit2(), and after deflateSetHeader(), if used. This would be used - to allocate an output buffer for deflation in a single pass, and so would be - called before deflate(). -*/ - -ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm, - int bits, - int value)); -/* - deflatePrime() inserts bits in the deflate output stream. The intent - is that this function is used to start off the deflate output with the bits - leftover from a previous deflate stream when appending to it. As such, this - function can only be used for raw deflate, and must be used before the first - deflate() call after a deflateInit2() or deflateReset(). bits must be less - than or equal to 16, and that many of the least significant bits of value - will be inserted in the output. - - deflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent. -*/ - -ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm, - gz_headerp head)); -/* - deflateSetHeader() provides gzip header information for when a gzip - stream is requested by deflateInit2(). deflateSetHeader() may be called - after deflateInit2() or deflateReset() and before the first call of - deflate(). The text, time, os, extra field, name, and comment information - in the provided gz_header structure are written to the gzip header (xflag is - ignored -- the extra flags are set according to the compression level). The - caller must assure that, if not Z_NULL, name and comment are terminated with - a zero byte, and that if extra is not Z_NULL, that extra_len bytes are - available there. If hcrc is true, a gzip header crc is included. Note that - the current versions of the command-line version of gzip (up through version - 1.3.x) do not support header crc's, and will report that it is a "multi-part - gzip file" and give up. - - If deflateSetHeader is not used, the default gzip header has text false, - the time set to zero, and os set to 255, with no extra, name, or comment - fields. The gzip header is returned to the default state by deflateReset(). - - deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent. -*/ - -/* -ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm, - int windowBits)); - - This is another version of inflateInit with an extra parameter. The - fields next_in, avail_in, zalloc, zfree and opaque must be initialized - before by the caller. - - The windowBits parameter is the base two logarithm of the maximum window - size (the size of the history buffer). It should be in the range 8..15 for - this version of the library. The default value is 15 if inflateInit is used - instead. windowBits must be greater than or equal to the windowBits value - provided to deflateInit2() while compressing, or it must be equal to 15 if - deflateInit2() was not used. If a compressed stream with a larger window - size is given as input, inflate() will return with the error code - Z_DATA_ERROR instead of trying to allocate a larger window. - - windowBits can also be zero to request that inflate use the window size in - the zlib header of the compressed stream. - - windowBits can also be -8..-15 for raw inflate. In this case, -windowBits - determines the window size. inflate() will then process raw deflate data, - not looking for a zlib or gzip header, not generating a check value, and not - looking for any check values for comparison at the end of the stream. This - is for use with other formats that use the deflate compressed data format - such as zip. Those formats provide their own check values. If a custom - format is developed using the raw deflate format for compressed data, it is - recommended that a check value such as an adler32 or a crc32 be applied to - the uncompressed data as is done in the zlib, gzip, and zip formats. For - most applications, the zlib format should be used as is. Note that comments - above on the use in deflateInit2() applies to the magnitude of windowBits. - - windowBits can also be greater than 15 for optional gzip decoding. Add - 32 to windowBits to enable zlib and gzip decoding with automatic header - detection, or add 16 to decode only the gzip format (the zlib format will - return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is a - crc32 instead of an adler32. - - inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_VERSION_ERROR if the zlib library version is incompatible with the - version assumed by the caller, or Z_STREAM_ERROR if the parameters are - invalid, such as a null pointer to the structure. msg is set to null if - there is no error message. inflateInit2 does not perform any decompression - apart from possibly reading the zlib header if present: actual decompression - will be done by inflate(). (So next_in and avail_in may be modified, but - next_out and avail_out are unused and unchanged.) The current implementation - of inflateInit2() does not process any header information -- that is - deferred until inflate() is called. -*/ - -ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm, - const Bytef *dictionary, - uInt dictLength)); -/* - Initializes the decompression dictionary from the given uncompressed byte - sequence. This function must be called immediately after a call of inflate, - if that call returned Z_NEED_DICT. The dictionary chosen by the compressor - can be determined from the adler32 value returned by that call of inflate. - The compressor and decompressor must use exactly the same dictionary (see - deflateSetDictionary). For raw inflate, this function can be called - immediately after inflateInit2() or inflateReset() and before any call of - inflate() to set the dictionary. The application must insure that the - dictionary that was used for compression is provided. - - inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a - parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is - inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the - expected one (incorrect adler32 value). inflateSetDictionary does not - perform any decompression: this will be done by subsequent calls of - inflate(). -*/ - -ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm)); -/* - Skips invalid compressed data until a full flush point (see above the - description of deflate with Z_FULL_FLUSH) can be found, or until all - available input is skipped. No output is provided. - - inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR - if no more input was provided, Z_DATA_ERROR if no flush point has been - found, or Z_STREAM_ERROR if the stream structure was inconsistent. In the - success case, the application may save the current current value of total_in - which indicates where valid compressed data was found. In the error case, - the application may repeatedly call inflateSync, providing more input each - time, until success or end of the input data. -*/ - -ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest, - z_streamp source)); -/* - Sets the destination stream as a complete copy of the source stream. - - This function can be useful when randomly accessing a large stream. The - first pass through the stream can periodically record the inflate state, - allowing restarting inflate at those points when randomly accessing the - stream. - - inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_STREAM_ERROR if the source stream state was inconsistent - (such as zalloc being Z_NULL). msg is left unchanged in both source and - destination. -*/ - -ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm)); -/* - This function is equivalent to inflateEnd followed by inflateInit, - but does not free and reallocate all the internal decompression state. The - stream will keep attributes that may have been set by inflateInit2. - - inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent (such as zalloc or state being Z_NULL). -*/ - -ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm, - int windowBits)); -/* - This function is the same as inflateReset, but it also permits changing - the wrap and window size requests. The windowBits parameter is interpreted - the same as it is for inflateInit2. - - inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent (such as zalloc or state being Z_NULL), or if - the windowBits parameter is invalid. -*/ - -ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm, - int bits, - int value)); -/* - This function inserts bits in the inflate input stream. The intent is - that this function is used to start inflating at a bit position in the - middle of a byte. The provided bits will be used before any bytes are used - from next_in. This function should only be used with raw inflate, and - should be used before the first inflate() call after inflateInit2() or - inflateReset(). bits must be less than or equal to 16, and that many of the - least significant bits of value will be inserted in the input. - - If bits is negative, then the input stream bit buffer is emptied. Then - inflatePrime() can be called again to put bits in the buffer. This is used - to clear out bits leftover after feeding inflate a block description prior - to feeding inflate codes. - - inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent. -*/ - -ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm)); -/* - This function returns two values, one in the lower 16 bits of the return - value, and the other in the remaining upper bits, obtained by shifting the - return value down 16 bits. If the upper value is -1 and the lower value is - zero, then inflate() is currently decoding information outside of a block. - If the upper value is -1 and the lower value is non-zero, then inflate is in - the middle of a stored block, with the lower value equaling the number of - bytes from the input remaining to copy. If the upper value is not -1, then - it is the number of bits back from the current bit position in the input of - the code (literal or length/distance pair) currently being processed. In - that case the lower value is the number of bytes already emitted for that - code. - - A code is being processed if inflate is waiting for more input to complete - decoding of the code, or if it has completed decoding but is waiting for - more output space to write the literal or match data. - - inflateMark() is used to mark locations in the input data for random - access, which may be at bit positions, and to note those cases where the - output of a code may span boundaries of random access blocks. The current - location in the input stream can be determined from avail_in and data_type - as noted in the description for the Z_BLOCK flush parameter for inflate. - - inflateMark returns the value noted above or -1 << 16 if the provided - source stream state was inconsistent. -*/ - -ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm, - gz_headerp head)); -/* - inflateGetHeader() requests that gzip header information be stored in the - provided gz_header structure. inflateGetHeader() may be called after - inflateInit2() or inflateReset(), and before the first call of inflate(). - As inflate() processes the gzip stream, head->done is zero until the header - is completed, at which time head->done is set to one. If a zlib stream is - being decoded, then head->done is set to -1 to indicate that there will be - no gzip header information forthcoming. Note that Z_BLOCK or Z_TREES can be - used to force inflate() to return immediately after header processing is - complete and before any actual data is decompressed. - - The text, time, xflags, and os fields are filled in with the gzip header - contents. hcrc is set to true if there is a header CRC. (The header CRC - was valid if done is set to one.) If extra is not Z_NULL, then extra_max - contains the maximum number of bytes to write to extra. Once done is true, - extra_len contains the actual extra field length, and extra contains the - extra field, or that field truncated if extra_max is less than extra_len. - If name is not Z_NULL, then up to name_max characters are written there, - terminated with a zero unless the length is greater than name_max. If - comment is not Z_NULL, then up to comm_max characters are written there, - terminated with a zero unless the length is greater than comm_max. When any - of extra, name, or comment are not Z_NULL and the respective field is not - present in the header, then that field is set to Z_NULL to signal its - absence. This allows the use of deflateSetHeader() with the returned - structure to duplicate the header. However if those fields are set to - allocated memory, then the application will need to save those pointers - elsewhere so that they can be eventually freed. - - If inflateGetHeader is not used, then the header information is simply - discarded. The header is always checked for validity, including the header - CRC if present. inflateReset() will reset the process to discard the header - information. The application would need to call inflateGetHeader() again to - retrieve the header from the next gzip stream. - - inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent. -*/ - -/* -ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits, - unsigned char FAR *window)); - - Initialize the internal stream state for decompression using inflateBack() - calls. The fields zalloc, zfree and opaque in strm must be initialized - before the call. If zalloc and zfree are Z_NULL, then the default library- - derived memory allocation routines are used. windowBits is the base two - logarithm of the window size, in the range 8..15. window is a caller - supplied buffer of that size. Except for special applications where it is - assured that deflate was used with small window sizes, windowBits must be 15 - and a 32K byte window must be supplied to be able to decompress general - deflate streams. - - See inflateBack() for the usage of these routines. - - inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of - the paramaters are invalid, Z_MEM_ERROR if the internal state could not be - allocated, or Z_VERSION_ERROR if the version of the library does not match - the version of the header file. -*/ - -typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *)); -typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned)); - -ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm, - in_func in, void FAR *in_desc, - out_func out, void FAR *out_desc)); -/* - inflateBack() does a raw inflate with a single call using a call-back - interface for input and output. This is more efficient than inflate() for - file i/o applications in that it avoids copying between the output and the - sliding window by simply making the window itself the output buffer. This - function trusts the application to not change the output buffer passed by - the output function, at least until inflateBack() returns. - - inflateBackInit() must be called first to allocate the internal state - and to initialize the state with the user-provided window buffer. - inflateBack() may then be used multiple times to inflate a complete, raw - deflate stream with each call. inflateBackEnd() is then called to free the - allocated state. - - A raw deflate stream is one with no zlib or gzip header or trailer. - This routine would normally be used in a utility that reads zip or gzip - files and writes out uncompressed files. The utility would decode the - header and process the trailer on its own, hence this routine expects only - the raw deflate stream to decompress. This is different from the normal - behavior of inflate(), which expects either a zlib or gzip header and - trailer around the deflate stream. - - inflateBack() uses two subroutines supplied by the caller that are then - called by inflateBack() for input and output. inflateBack() calls those - routines until it reads a complete deflate stream and writes out all of the - uncompressed data, or until it encounters an error. The function's - parameters and return types are defined above in the in_func and out_func - typedefs. inflateBack() will call in(in_desc, &buf) which should return the - number of bytes of provided input, and a pointer to that input in buf. If - there is no input available, in() must return zero--buf is ignored in that - case--and inflateBack() will return a buffer error. inflateBack() will call - out(out_desc, buf, len) to write the uncompressed data buf[0..len-1]. out() - should return zero on success, or non-zero on failure. If out() returns - non-zero, inflateBack() will return with an error. Neither in() nor out() - are permitted to change the contents of the window provided to - inflateBackInit(), which is also the buffer that out() uses to write from. - The length written by out() will be at most the window size. Any non-zero - amount of input may be provided by in(). - - For convenience, inflateBack() can be provided input on the first call by - setting strm->next_in and strm->avail_in. If that input is exhausted, then - in() will be called. Therefore strm->next_in must be initialized before - calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called - immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in - must also be initialized, and then if strm->avail_in is not zero, input will - initially be taken from strm->next_in[0 .. strm->avail_in - 1]. - - The in_desc and out_desc parameters of inflateBack() is passed as the - first parameter of in() and out() respectively when they are called. These - descriptors can be optionally used to pass any information that the caller- - supplied in() and out() functions need to do their job. - - On return, inflateBack() will set strm->next_in and strm->avail_in to - pass back any unused input that was provided by the last in() call. The - return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR - if in() or out() returned an error, Z_DATA_ERROR if there was a format error - in the deflate stream (in which case strm->msg is set to indicate the nature - of the error), or Z_STREAM_ERROR if the stream was not properly initialized. - In the case of Z_BUF_ERROR, an input or output error can be distinguished - using strm->next_in which will be Z_NULL only if in() returned an error. If - strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning - non-zero. (in() will always be called before out(), so strm->next_in is - assured to be defined if out() returns non-zero.) Note that inflateBack() - cannot return Z_OK. -*/ - -ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm)); -/* - All memory allocated by inflateBackInit() is freed. - - inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream - state was inconsistent. -*/ - -ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void)); -/* Return flags indicating compile-time options. - - Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other: - 1.0: size of uInt - 3.2: size of uLong - 5.4: size of voidpf (pointer) - 7.6: size of z_off_t - - Compiler, assembler, and debug options: - 8: DEBUG - 9: ASMV or ASMINF -- use ASM code - 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention - 11: 0 (reserved) - - One-time table building (smaller code, but not thread-safe if true): - 12: BUILDFIXED -- build static block decoding tables when needed - 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed - 14,15: 0 (reserved) - - Library content (indicates missing functionality): - 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking - deflate code when not needed) - 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect - and decode gzip streams (to avoid linking crc code) - 18-19: 0 (reserved) - - Operation variations (changes in library functionality): - 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate - 21: FASTEST -- deflate algorithm with only one, lowest compression level - 22,23: 0 (reserved) - - The sprintf variant used by gzprintf (zero is best): - 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format - 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure! - 26: 0 = returns value, 1 = void -- 1 means inferred string length returned - - Remainder: - 27-31: 0 (reserved) - */ - - - /* utility functions */ - -/* - The following utility functions are implemented on top of the basic - stream-oriented functions. To simplify the interface, some default options - are assumed (compression level and memory usage, standard memory allocation - functions). The source code of these utility functions can be modified if - you need special options. -*/ - -ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen)); -/* - Compresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total size - of the destination buffer, which must be at least the value returned by - compressBound(sourceLen). Upon exit, destLen is the actual size of the - compressed buffer. - - compress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer. -*/ - -ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen, - int level)); -/* - Compresses the source buffer into the destination buffer. The level - parameter has the same meaning as in deflateInit. sourceLen is the byte - length of the source buffer. Upon entry, destLen is the total size of the - destination buffer, which must be at least the value returned by - compressBound(sourceLen). Upon exit, destLen is the actual size of the - compressed buffer. - - compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_BUF_ERROR if there was not enough room in the output buffer, - Z_STREAM_ERROR if the level parameter is invalid. -*/ - -ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen)); -/* - compressBound() returns an upper bound on the compressed size after - compress() or compress2() on sourceLen bytes. It would be used before a - compress() or compress2() call to allocate the destination buffer. -*/ - -ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen)); -/* - Decompresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total size - of the destination buffer, which must be large enough to hold the entire - uncompressed data. (The size of the uncompressed data must have been saved - previously by the compressor and transmitted to the decompressor by some - mechanism outside the scope of this compression library.) Upon exit, destLen - is the actual size of the uncompressed buffer. - - uncompress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. -*/ - - - /* gzip file access functions */ - -/* - This library supports reading and writing files in gzip (.gz) format with - an interface similar to that of stdio, using the functions that start with - "gz". The gzip format is different from the zlib format. gzip is a gzip - wrapper, documented in RFC 1952, wrapped around a deflate stream. -*/ - -typedef voidp gzFile; /* opaque gzip file descriptor */ - -/* -ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode)); - - Opens a gzip (.gz) file for reading or writing. The mode parameter is as - in fopen ("rb" or "wb") but can also include a compression level ("wb9") or - a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only - compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F' - for fixed code compression as in "wb9F". (See the description of - deflateInit2 for more information about the strategy parameter.) Also "a" - can be used instead of "w" to request that the gzip stream that will be - written be appended to the file. "+" will result in an error, since reading - and writing to the same gzip file is not supported. - - gzopen can be used to read a file which is not in gzip format; in this - case gzread will directly read from the file without decompression. - - gzopen returns NULL if the file could not be opened, if there was - insufficient memory to allocate the gzFile state, or if an invalid mode was - specified (an 'r', 'w', or 'a' was not provided, or '+' was provided). - errno can be checked to determine if the reason gzopen failed was that the - file could not be opened. -*/ - -ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode)); -/* - gzdopen associates a gzFile with the file descriptor fd. File descriptors - are obtained from calls like open, dup, creat, pipe or fileno (if the file - has been previously opened with fopen). The mode parameter is as in gzopen. - - The next call of gzclose on the returned gzFile will also close the file - descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor - fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd, - mode);. The duplicated descriptor should be saved to avoid a leak, since - gzdopen does not close fd if it fails. - - gzdopen returns NULL if there was insufficient memory to allocate the - gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not - provided, or '+' was provided), or if fd is -1. The file descriptor is not - used until the next gz* read, write, seek, or close operation, so gzdopen - will not detect if fd is invalid (unless fd is -1). -*/ - -ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size)); -/* - Set the internal buffer size used by this library's functions. The - default buffer size is 8192 bytes. This function must be called after - gzopen() or gzdopen(), and before any other calls that read or write the - file. The buffer memory allocation is always deferred to the first read or - write. Two buffers are allocated, either both of the specified size when - writing, or one of the specified size and the other twice that size when - reading. A larger buffer size of, for example, 64K or 128K bytes will - noticeably increase the speed of decompression (reading). - - The new buffer size also affects the maximum length for gzprintf(). - - gzbuffer() returns 0 on success, or -1 on failure, such as being called - too late. -*/ - -ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy)); -/* - Dynamically update the compression level or strategy. See the description - of deflateInit2 for the meaning of these parameters. - - gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not - opened for writing. -*/ - -ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len)); -/* - Reads the given number of uncompressed bytes from the compressed file. If - the input file was not in gzip format, gzread copies the given number of - bytes into the buffer. - - After reaching the end of a gzip stream in the input, gzread will continue - to read, looking for another gzip stream, or failing that, reading the rest - of the input file directly without decompression. The entire input file - will be read if gzread is called until it returns less than the requested - len. - - gzread returns the number of uncompressed bytes actually read, less than - len for end of file, or -1 for error. -*/ - -ZEXTERN int ZEXPORT gzwrite OF((gzFile file, - voidpc buf, unsigned len)); -/* - Writes the given number of uncompressed bytes into the compressed file. - gzwrite returns the number of uncompressed bytes written or 0 in case of - error. -*/ - -ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...)); -/* - Converts, formats, and writes the arguments to the compressed file under - control of the format string, as in fprintf. gzprintf returns the number of - uncompressed bytes actually written, or 0 in case of error. The number of - uncompressed bytes written is limited to 8191, or one less than the buffer - size given to gzbuffer(). The caller should assure that this limit is not - exceeded. If it is exceeded, then gzprintf() will return an error (0) with - nothing written. In this case, there may also be a buffer overflow with - unpredictable consequences, which is possible only if zlib was compiled with - the insecure functions sprintf() or vsprintf() because the secure snprintf() - or vsnprintf() functions were not available. This can be determined using - zlibCompileFlags(). -*/ - -ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s)); -/* - Writes the given null-terminated string to the compressed file, excluding - the terminating null character. - - gzputs returns the number of characters written, or -1 in case of error. -*/ - -ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len)); -/* - Reads bytes from the compressed file until len-1 characters are read, or a - newline character is read and transferred to buf, or an end-of-file - condition is encountered. If any characters are read or if len == 1, the - string is terminated with a null character. If no characters are read due - to an end-of-file or len < 1, then the buffer is left untouched. - - gzgets returns buf which is a null-terminated string, or it returns NULL - for end-of-file or in case of error. If there was an error, the contents at - buf are indeterminate. -*/ - -ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c)); -/* - Writes c, converted to an unsigned char, into the compressed file. gzputc - returns the value that was written, or -1 in case of error. -*/ - -ZEXTERN int ZEXPORT gzgetc OF((gzFile file)); -/* - Reads one byte from the compressed file. gzgetc returns this byte or -1 - in case of end of file or error. -*/ - -ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file)); -/* - Push one character back onto the stream to be read as the first character - on the next read. At least one character of push-back is allowed. - gzungetc() returns the character pushed, or -1 on failure. gzungetc() will - fail if c is -1, and may fail if a character has been pushed but not read - yet. If gzungetc is used immediately after gzopen or gzdopen, at least the - output buffer size of pushed characters is allowed. (See gzbuffer above.) - The pushed character will be discarded if the stream is repositioned with - gzseek() or gzrewind(). -*/ - -ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush)); -/* - Flushes all pending output into the compressed file. The parameter flush - is as in the deflate() function. The return value is the zlib error number - (see function gzerror below). gzflush is only permitted when writing. - - If the flush parameter is Z_FINISH, the remaining data is written and the - gzip stream is completed in the output. If gzwrite() is called again, a new - gzip stream will be started in the output. gzread() is able to read such - concatented gzip streams. - - gzflush should be called only when strictly necessary because it will - degrade compression if called too often. -*/ - -/* -ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file, - z_off_t offset, int whence)); - - Sets the starting position for the next gzread or gzwrite on the given - compressed file. The offset represents a number of bytes in the - uncompressed data stream. The whence parameter is defined as in lseek(2); - the value SEEK_END is not supported. - - If the file is opened for reading, this function is emulated but can be - extremely slow. If the file is opened for writing, only forward seeks are - supported; gzseek then compresses a sequence of zeroes up to the new - starting position. - - gzseek returns the resulting offset location as measured in bytes from - the beginning of the uncompressed stream, or -1 in case of error, in - particular if the file is opened for writing and the new starting position - would be before the current position. -*/ - -ZEXTERN int ZEXPORT gzrewind OF((gzFile file)); -/* - Rewinds the given file. This function is supported only for reading. - - gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) -*/ - -/* -ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file)); - - Returns the starting position for the next gzread or gzwrite on the given - compressed file. This position represents a number of bytes in the - uncompressed data stream, and is zero when starting, even if appending or - reading a gzip stream from the middle of a file using gzdopen(). - - gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) -*/ - -/* -ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file)); - - Returns the current offset in the file being read or written. This offset - includes the count of bytes that precede the gzip stream, for example when - appending or when using gzdopen() for reading. When reading, the offset - does not include as yet unused buffered input. This information can be used - for a progress indicator. On error, gzoffset() returns -1. -*/ - -ZEXTERN int ZEXPORT gzeof OF((gzFile file)); -/* - Returns true (1) if the end-of-file indicator has been set while reading, - false (0) otherwise. Note that the end-of-file indicator is set only if the - read tried to go past the end of the input, but came up short. Therefore, - just like feof(), gzeof() may return false even if there is no more data to - read, in the event that the last read request was for the exact number of - bytes remaining in the input file. This will happen if the input file size - is an exact multiple of the buffer size. - - If gzeof() returns true, then the read functions will return no more data, - unless the end-of-file indicator is reset by gzclearerr() and the input file - has grown since the previous end of file was detected. -*/ - -ZEXTERN int ZEXPORT gzdirect OF((gzFile file)); -/* - Returns true (1) if file is being copied directly while reading, or false - (0) if file is a gzip stream being decompressed. This state can change from - false to true while reading the input file if the end of a gzip stream is - reached, but is followed by data that is not another gzip stream. - - If the input file is empty, gzdirect() will return true, since the input - does not contain a gzip stream. - - If gzdirect() is used immediately after gzopen() or gzdopen() it will - cause buffers to be allocated to allow reading the file to determine if it - is a gzip file. Therefore if gzbuffer() is used, it should be called before - gzdirect(). -*/ - -ZEXTERN int ZEXPORT gzclose OF((gzFile file)); -/* - Flushes all pending output if necessary, closes the compressed file and - deallocates the (de)compression state. Note that once file is closed, you - cannot call gzerror with file, since its structures have been deallocated. - gzclose must not be called more than once on the same file, just as free - must not be called more than once on the same allocation. - - gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a - file operation error, or Z_OK on success. -*/ - -ZEXTERN int ZEXPORT gzclose_r OF((gzFile file)); -ZEXTERN int ZEXPORT gzclose_w OF((gzFile file)); -/* - Same as gzclose(), but gzclose_r() is only for use when reading, and - gzclose_w() is only for use when writing or appending. The advantage to - using these instead of gzclose() is that they avoid linking in zlib - compression or decompression code that is not used when only reading or only - writing respectively. If gzclose() is used, then both compression and - decompression code will be included the application when linking to a static - zlib library. -*/ - -ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum)); -/* - Returns the error message for the last error which occurred on the given - compressed file. errnum is set to zlib error number. If an error occurred - in the file system and not in the compression library, errnum is set to - Z_ERRNO and the application may consult errno to get the exact error code. - - The application must not modify the returned string. Future calls to - this function may invalidate the previously returned string. If file is - closed, then the string previously returned by gzerror will no longer be - available. - - gzerror() should be used to distinguish errors from end-of-file for those - functions above that do not distinguish those cases in their return values. -*/ - -ZEXTERN void ZEXPORT gzclearerr OF((gzFile file)); -/* - Clears the error and end-of-file flags for file. This is analogous to the - clearerr() function in stdio. This is useful for continuing to read a gzip - file that is being written concurrently. -*/ - - - /* checksum functions */ - -/* - These functions are not related to compression but are exported - anyway because they might be useful in applications using the compression - library. -*/ - -ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len)); -/* - Update a running Adler-32 checksum with the bytes buf[0..len-1] and - return the updated checksum. If buf is Z_NULL, this function returns the - required initial value for the checksum. - - An Adler-32 checksum is almost as reliable as a CRC32 but can be computed - much faster. - - Usage example: - - uLong adler = adler32(0L, Z_NULL, 0); - - while (read_buffer(buffer, length) != EOF) { - adler = adler32(adler, buffer, length); - } - if (adler != original_adler) error(); -*/ - -/* -ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2, - z_off_t len2)); - - Combine two Adler-32 checksums into one. For two sequences of bytes, seq1 - and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for - each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of - seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. -*/ - -ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); -/* - Update a running CRC-32 with the bytes buf[0..len-1] and return the - updated CRC-32. If buf is Z_NULL, this function returns the required - initial value for the for the crc. Pre- and post-conditioning (one's - complement) is performed within this function so it shouldn't be done by the - application. - - Usage example: - - uLong crc = crc32(0L, Z_NULL, 0); - - while (read_buffer(buffer, length) != EOF) { - crc = crc32(crc, buffer, length); - } - if (crc != original_crc) error(); -*/ - -/* -ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2)); - - Combine two CRC-32 check values into one. For two sequences of bytes, - seq1 and seq2 with lengths len1 and len2, CRC-32 check values were - calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32 - check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and - len2. -*/ - - - /* various hacks, don't look :) */ - -/* deflateInit and inflateInit are macros to allow checking the zlib version - * and the compiler's view of z_stream: - */ -ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level, - const char *version, int stream_size)); -ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm, - const char *version, int stream_size)); -ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method, - int windowBits, int memLevel, - int strategy, const char *version, - int stream_size)); -ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits, - const char *version, int stream_size)); -ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, - unsigned char FAR *window, - const char *version, - int stream_size)); -#define deflateInit(strm, level) \ - deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream)) -#define inflateInit(strm) \ - inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream)) -#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ - deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ - (strategy), ZLIB_VERSION, sizeof(z_stream)) -#define inflateInit2(strm, windowBits) \ - inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream)) -#define inflateBackInit(strm, windowBits, window) \ - inflateBackInit_((strm), (windowBits), (window), \ - ZLIB_VERSION, sizeof(z_stream)) - -/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or - * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if - * both are true, the application gets the *64 functions, and the regular - * functions are changed to 64 bits) -- in case these are set on systems - * without large file support, _LFS64_LARGEFILE must also be true - */ -#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0 - ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); - ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int)); - ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile)); - ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile)); - ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t)); - ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t)); -#endif - -#if !defined(ZLIB_INTERNAL) && _FILE_OFFSET_BITS-0 == 64 && _LFS64_LARGEFILE-0 -# define gzopen gzopen64 -# define gzseek gzseek64 -# define gztell gztell64 -# define gzoffset gzoffset64 -# define adler32_combine adler32_combine64 -# define crc32_combine crc32_combine64 -# ifdef _LARGEFILE64_SOURCE - ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); - ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int)); - ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile)); - ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile)); - ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t)); - ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t)); -# endif -#else - ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *)); - ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int)); - ZEXTERN z_off_t ZEXPORT gztell OF((gzFile)); - ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile)); - ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t)); - ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t)); -#endif - -/* hack for buggy compilers */ -#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL) - struct internal_state {int dummy;}; -#endif - -/* undocumented functions */ -ZEXTERN const char * ZEXPORT zError OF((int)); -ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp)); -ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void)); -ZEXTERN int ZEXPORT inflateUndermine OF((z_streamp, int)); - -#ifdef __cplusplus -} -#endif - -#endif /* ZLIB_H */ -- cgit v1.2.3