{$IFNDEF M_DATABASE} {$DEFINE M_DATABASE} type PDBVARIANT = ^TDBVARIANT; TDBVARIANT = record _type: byte; case LongInt of 0: (bVal: byte); 1: (cVal: AnsiChar); 2: (wVal: word); 3: (sVal: ShortInt); 4: (dVal: dword); 5: (lVal: long); 6: ( szVal : TChar; cchVal: word; ); 7: ( cpbVal: word; pbVal : PByte; ); end; const DBEF_SENT = 2; // if set, the event was sent by the user, otherwise it was received DBEF_READ = 4; // event has been read by the user -- only needed for history DBEF_RTL = 8; // event contains the right-to-left aligned text DBEF_UTF = 16; // event contains a text in utf-8 DBEF_ENCRYPTED = 32; // event is encrypted (never reported outside a driver) const EVENTTYPE_MESSAGE = 0; EVENTTYPE_CONTACTS = 2; // v0.1.2.2+ EVENTTYPE_ADDED = 1000; // v0.1.1.0+: these used to be module- EVENTTYPE_AUTHREQUEST = 1001; // specific codes, hence the module- EVENTTYPE_FILE = 1002; // specific limit has been raised to 2000 type PDBEVENTINFO = ^TDBEVENTINFO; TDBEVENTINFO = record szModule : PAnsiChar; // module that 'owns' this event and controls the data format timestamp: dword; // timestamp in UNIX time flags : dword; // the DBEF_* flags above eventType: word; // event type, such as message, can be module defined cbBlob : dword; // size in bytes of pBlob^ pBlob : PByte; // pointer to buffer containing the module defined event data end; (****************************************************************************** * DATABASE EVENTS *) { Adds a new event to a contact's event list Returns a handle to the newly added event, or NULL on failure Triggers a db/event/added event just before it returns. Events are sorted chronologically as they are entered, so you cannot guarantee that the new hEvent is the last event in the chain, however if a new event is added that has a timestamp less than 90 seconds *before* the event that should be after it, it will be added afterwards, to allow for protocols that only store times to the nearest minute, and slight delays in transports. There are a few predefined eventTypes below for easier compatibility, but modules are free to define their own, beginning at 2000 DBEVENTINFO.timestamp is in GMT, as returned by time(). There are services db/time/x below with useful stuff for dealing with it. } function db_event_add(hContact:TMCONTACT; dbei:PDBEVENTINFO):TMEVENT; stdcall; external CoreDLL; { Gets the number of events in the chain belonging to a contact in the database. Returns the number of events in the chain owned by hContact or -1 if hContact is invalid. They can be retrieved using the db_event_first/last() services. Returns 0 for Subcontacts (use db_event_last to recognize empty history) } function db_event_count(hContact:TMCONTACT):int; stdcall; external CoreDLL; { Removes a single event from the database hDbEvent should have been returned by db_event_add/first/last/next/prev() Returns 0 on success, or nonzero if hDbEvent was invalid Triggers a db/event/deleted event just *before* the event is deleted } function db_event_delete(hContact:TMCONTACT; hDbEvent:TMEVENT):int; stdcall; external CoreDLL; { Retrieves a handle to the first event in the chain for hContact Returns the handle, or NULL if hContact is invalid or has no events Events in a chain are sorted chronologically automatically } function db_event_first(hContact:TMCONTACT):TMEVENT; stdcall; external CoreDLL; { Retrieves all the information stored in hDbEvent hDbEvent should have been returned by db_event_add/first/last/next/prev() Returns 0 on success or nonzero if hDbEvent is invalid Don't forget to set dbe.cbSize, dbe.pBlob and dbe.cbBlob before calling this service The correct value dbe.cbBlob can be got using db/event/getblobsize If successful, all the fields of dbe are filled. dbe.cbBlob is set to the actual number of bytes retrieved and put in dbe.pBlob If dbe.cbBlob is too small, dbe.pBlob is filled up to the size of dbe.cbBlob and then dbe.cbBlob is set to the required size of data to go in dbe.pBlob On return, dbe.szModule is a pointer to the database module's own internal list of modules. Look but don't touch. } function db_event_get(hDbEvent:TMEVENT; dbei:PDBEVENTINFO):int; stdcall; external CoreDLL; { Retrieves the space in bytes required to store the blob in hDbEvent hDbEvent should have been returned by db_event_add/first/last/next/prev() Returns the space required in bytes, or -1 if hDbEvent is invalid } function db_event_getBlobSize(hDbEvent:TMEVENT):int; stdcall; external CoreDLL; { Retrieves a handle to the contact that owns hDbEvent. hDbEvent should have been returned by db_event_add/first/last/next/prev() NULL is a valid return value, meaning, as usual, the user. Returns (HANDLE)(-1) if hDbEvent is invalid, or the handle to the contact on success This service is exceptionally slow. Use only when you have no other choice at all. } function db_event_getContact(hDbEvent:TMEVENT):TMCONTACT; stdcall; external CoreDLL; { Retrieves a handle to the last event in the chain for hContact Returns the handle, or NULL if hContact is invalid or has no events Events in a chain are sorted chronologically automatically } function db_event_last(hContact:TMCONTACT):TMEVENT; stdcall; external CoreDLL; { Changes the flags for an event to mark it as read. hDbEvent should have been returned by db_event_add/first/last/next/prev() Returns the entire flag dword for the event after the change, or -1 if hDbEvent is invalid. This is the one database write operation that does not trigger an event. Modules should not save flags states for any length of time. } function db_event_markRead(hContact:TMCONTACT; hDbEvent:TMEVENT):int; stdcall; external CoreDLL; { Retrieves a handle to the next event in a chain after hDbEvent Returns the handle, or NULL if hDbEvent is invalid or is the last event Events in a chain are sorted chronologically automatically } function db_event_next(hContact:TMCONTACT; hDbEvent:TMEVENT):THANDLE; stdcall; external CoreDLL; { Retrieves a handle to the previous event in a chain before hDbEvent Returns the handle, or NULL if hDbEvent is invalid or is the first event Events in a chain are sorted chronologically automatically } function db_event_prev(hContact:TMCONTACT; hDbEvent:TMEVENT):THANDLE; stdcall; external CoreDLL; function db_free(dbv:PDBVARIANT):int_ptr; stdcall; external CoreDLL; (****************************************************************************** * DATABASE CONTACTS *) { Gets the handle of the first contact in the database. This handle can be used with loads of functions. It does not need to be closed. You can specify szProto to find only its contacts Returns a handle to the first contact in the db on success, or NULL if there are no contacts in the db. } function db_find_first(const szModule:PAnsiChar=nil):TMCONTACT; stdcall; external CoreDLL; { Gets the handle of the next contact after hContact in the database. This handle can be used with loads of functions. It does not need to be closed. You can specify szProto to find only its contacts Returns a handle to the contact after hContact in the db on success or NULL if hContact was the last contact in the db or hContact was invalid. } function db_find_next(hContact:TMCONTACT; const szModule:PAnsiChar=nil):TMCONTACT; stdcall; external CoreDLL; (****************************************************************************** * DATABASE SETTINGS *) function db_get(hContact:TMCONTACT; const szModule:PAnsiChar; const szSetting:PAnsiChar; dbv:PDBVARIANT):int_ptr; stdcall; external CoreDLL; function db_get_b(hContact:TMCONTACT; const szModule:PAnsiChar; const szSetting:PAnsiChar; errorValue:int):int; stdcall; external CoreDLL; function db_get_w(hContact:TMCONTACT; const szModule:PAnsiChar; const szSetting:PAnsiChar; errorValue:int):int; stdcall; external CoreDLL; function db_get_dw(hContact:TMCONTACT; const szModule:PAnsiChar; const szSetting:PAnsiChar; errorValue:dword):dword; stdcall; external CoreDLL; function db_get_s(hContact:TMCONTACT; const szModule:PAnsiChar; const szSetting:PAnsiChar; dbv:PDBVARIANT; const nType:int=DBVT_ASCIIZ):int_ptr; stdcall; external CoreDLL; function db_get_static(hContact:TMCONTACT; const szModule:PAnsiChar; const szSetting:PAnsiChar; szDest:PAnsiChar; destLen:int):int; stdcall; external CoreDLL; function db_get_static_utf(hContact:TMCONTACT; const szModule:PAnsiChar; const szSetting:PAnsiChar; szDest:PAnsiChar; destLen:int):int; stdcall; external CoreDLL; function db_get_wstatic(hContact:TMCONTACT; const szModule:PAnsiChar; const szSetting:PAnsiChar; szDest:PWideChar; destLen:int):int; stdcall; external CoreDLL; function db_set(hContact:TMCONTACT; const szModule:PAnsiChar; const szSetting:PAnsiChar; dbv:PDBVARIANT):int_ptr; stdcall; external CoreDLL; function db_set_b(hContact:TMCONTACT; const szModule:PAnsiChar; const szSetting:PAnsiChar; val:byte):int_ptr; stdcall; external CoreDLL; function db_set_w(hContact:TMCONTACT; const szModule:PAnsiChar; const szSetting:PAnsiChar; val:word):int_ptr; stdcall; external CoreDLL; function db_set_dw(hContact:TMCONTACT; const szModule:PAnsiChar; const szSetting:PAnsiChar; val:dword):int_ptr; stdcall; external CoreDLL; function db_set_s(hContact:TMCONTACT; const szModule:PAnsiChar; const szSetting:PAnsiChar; const val:PAnsiChar):int_ptr; stdcall; external CoreDLL; function db_set_ws(hContact:TMCONTACT; const szModule:PAnsiChar; const szSetting:PAnsiChar; const val:PWideChar):int_ptr; stdcall; external CoreDLL; function db_set_utf(hContact:TMCONTACT; const szModule:PAnsiChar; const szSetting:PAnsiChar; const val:PAnsiChar):int_ptr; stdcall; external CoreDLL; function db_set_blob(hContact:TMCONTACT; const szModule:PAnsiChar; const szSetting:PAnsiChar; val:pointer; len:uint):int_ptr; stdcall; external CoreDLL; function db_unset(hContact:TMCONTACT; const szModule:PAnsiChar; const szSetting:PAnsiChar):int_ptr; stdcall; external CoreDLL; function db_set_resident(const szModule:PAnsiChar; const szSetting:PAnsiChar; bEnable:int):int; stdcall; external CoreDLL; /////////////////////////////////////////////////////////////////////////////// function db_add_contact() : TMCONTACT; stdcall; external CoreDLL; function db_delete_contact(hContact:TMCONTACT) : int; stdcall; external CoreDLL; function db_is_contact(hContact:TMCONTACT) : int; stdcall; external CoreDLL; function db_get_contact_count() : int; stdcall; external CoreDLL; /////////////////////////////////////////////////////////////////////////////// function Profile_GetNameA(cbLen:cardinal; pDest:PAnsiChar) : int; stdcall; external AppDll; function Profile_GetNameW(cbLen:cardinal; pDest:PWideChar) : int; stdcall; external AppDll; function Profile_GetPathA(cbLen:cardinal; pDest:PAnsiChar) : int; stdcall; external AppDll; function Profile_GetPathW(cbLen:cardinal; pDest:PWideChar) : int; stdcall; external AppDll; /////////////////////////////////////////////////////////////////////////////// type PDBCONTACTWRITESETTING = ^TDBCONTACTWRITESETTING; TDBCONTACTWRITESETTING = record szModule : PAnsiChar; // module sig to write this setting under szSetting: PAnsiChar; // setting name to write value : TDBVARIANT; // variant containing value to set end; { wParam : Handle of a contact to enum settings for lParam : Pointer to a TDBCONTACTENUMSETTINGS structure, must be initalised affect : Enumerates all settings for a given contact under a module, TDBCONTACTENUMSETTINGS must be filled with the function pointer to call the TDBCONTACTENUMSETTINGS.lParam value to pass to it each time, as well as the .szModule under which the contact is valid returns: returns the value of the last call to the enum function, or -1 if no settings could be enumerated notes : the szSetting argument passed to the enumeration function is only valid for the duration of that enumeration call, it must be allocated dynamically if it is required after that call frame has returned. Also, deleting settings as they are enumerated has unpredictable results! but writing a new value for a setting is okay. it is unclear how you stop the enumeration once it is started, maybe possible to return -1 to stop it. vesion : only valid for 0.1.0.1+ } type TDBSETTINGENUMPROC = function(const szSetting: PAnsiChar; lParam: LPARAM): int; cdecl; function db_enum_settings(hContact:TMCONTACT; pFunc:TDBSETTINGENUMPROC; szModule:PAnsiChar; param:pointer) : int; stdcall; external CoreDll; //************************** Event ********************************* { DB/EventType/Register service (0.7+) Registers the specified database event type, with module, id & description. When someone needs to retrieve an event's text, a service named Module/GetEventText will be called. For example, for module named 'foo' and event id 2000 a service foo/GetEventText2000 should be defined to process this request. That handler should decode a blob and return the event text in the required format, its prototype is identical to a call of MS_DB_EVENT_GETTEXT (see below) wParam=0 lParam=(LPARAM)(DBEVENTTYPEDESCR*) Returns -1 on error (e.g., event type already registred), 0 on success } type PDBEVENTTYPEDESCR = ^TDBEVENTTYPEDESCR; TDBEVENTTYPEDESCR = record cbSize :int; // structure size in bytes module :PAnsiChar; // event module name eventType :int; // event id, unique for this module (actually, word size) descr :PAnsiChar; // event type description (i.e. "File Transfer") textService:PAnsiChar; // service name for MS_DB_EVENT_GETTEXT (0.8+, default Module+'/GetEventText'+EvtID) iconService:PAnsiChar; // service name for MS_DB_EVENT_GETICON (0.8+, default Module+'/GetEventIcon'+EvtID) eventIcon :THANDLE; // icolib handle to eventicon (0.8+, default 'eventicon_'+Module+EvtID) flags :dword; // flags, combination of the DETF_* end; const // constants for default event behaviour DETF_HISTORY = 1; // show event in history DETF_MSGWINDOW = 2; // show event in message window DETF_NONOTIFY = 4; // block event notify (e.g. Popups) function DbEvent_RegisterType(et:PDBEVENTTYPEDESCR) : int; stdcall; external AppDll; function DbEvent_GetType(szModule:PAnsiChar; eventType:int) : PDBEVENTTYPEDESCR; stdcall; external AppDll; function DbEvent_GetTextA(dbei:PDBEVENTINFO; codepage:int) : PAnsiChar; stdcall; external AppDll; function DbEvent_GetTextW(dbei:PDBEVENTINFO; codepage:int) : PWideChar; stdcall; external AppDll; function DbEvent_GetIcon(dbei:PDBEVENTINFO; flags:int) : HICON; stdcall; external AppDll; //*************************** Modules ****************************** function db_delete_module(hContact:TMCONTACT; szModuleName:PAnsiChar) : int; stdcall; external CoreDll; //************************** RANDOM ******************************** function db_set_safety_mode(bMode:int) : int; stdcall; external CoreDll; //************************** EVENTS ******************************** { wParam : TMCONTACT lParam : TMEVENT Affect : Called when a new event has been added to the event chain for a contact, TMCONTACT contains the contact who added the event, TMEVENT a handle to what was added. see notes notes : since events are sorted chronologically, you can not guarantee that TMEVENT is in any particular position in the chain. } const ME_DB_EVENT_ADDED:PAnsiChar = 'DB/Event/Added'; { wParam : TMCONTACT lParam : @DBEVENTINFO Affects: Hook is fired before any DBEVENTS are created within the database for a contact (or a user, if hContact is NULL(0)) - It allows a module to query/change DBEVENTINFO before it is created, see notes. Returns: Hook should return 1 to stop event being added (will stop other hooks seeing the event too) Or 0 to continue processing (passing the data on as well) Notes : This hook is fired for all event types, and the BLOBS that the eventypes mark Maybe changed, therefore be careful about using BLOB formats. Because the memory pointing within the DBEVENTINFO CAN NOT BE OWNED or free()'d it is recommended that the hook only be used to stop events. Version: 0.3.3a+ (2003/12/03) } ME_DB_EVENT_FILTER_ADD:PAnsiChar = 'DB/Event/FilterAdd'; { wParam : TMCONTACT lParam : TMEVENT Affect : Called when an event is marked read } ME_DB_EVENT_MARKED_READ:PAnsiChar = 'DB/Event/Marked/Read'; { wParam : TMCONTACT lParam : TMEVENT Affect : Called when an event is about to be deleted from the event chain for a contact, see notes notes : Returning non zero from your hook will NOT stop the deletion, but it will as usual stop other hooks being called } ME_DB_EVENT_DELETED:PAnsiChar = 'DB/Event/Deleted'; { wParam : TMCONTACT lParam : 0 Affect : Called when a new contact has been added to the database, TMCONTACT contains a handle to the new contact. } ME_DB_CONTACT_ADDED:PAnsiChar = 'DB/Contact/Added'; { wParam : TMCONTACT lParam : 0 Affect : Called when a contact is about to be deleted Returns: Returning nonzero from your hook will not stop the deletion but it will stop the other hooks from being called } ME_DB_CONTACT_DELETED:PAnsiChar = 'DB/Contact/Deleted'; { wParam : TMCONTACT lParam : Pointer to a TDBCONTACTWRITESETTING Affect : Calleed when a contact has one of it's settings changed hContact is a valid handle to the contact that has changed, see notes. notes : this event will be triggered many times rapidly when alot of values are set. Modules that hook this should be aware of this fact and quickly return if they are not interested in the value that has changed. Careful not to get into infinite loops with this event, The TDBCONTACTWRITESETTING pointer is the same one as the original service all, so don't change any of it's fields } ME_DB_CONTACT_SETTINGCHANGED:PAnsiChar = 'DB/Contact/SettingChanged'; {$ENDIF}