Czech langpack: update

git-svn-id: http://svn.miranda-ng.org/main/trunk@6282 1316c22d-e87f-b044-9b9b-93d7a3e3ba9c

10 files changed, 27 insertions, 26 deletions

diff --git a/langpacks/czech/Plugins/AIM.txt b/langpacks/czech/Plugins/AIM.txt
index 4e96b25d91..17ac977ff5 100644
--- a/langpacks/czech/Plugins/AIM.txt
+++ b/langpacks/czech/Plugins/AIM.txt
@@ -270,7 +270,7 @@ Chybějící stav DT.
 [Outstanding Confirmation.]

 Mimořádné potvrzení.

 [No Email Address.]

-Chybající e-mailová adresa.

+Chybějící e-mailová adresa.

 [Over Limit.]

 Přes limit.

 [Email Host Fail.]

diff --git a/langpacks/czech/Plugins/Facebook.txt b/langpacks/czech/Plugins/Facebook.txt
index 91c5ef0110..966aa015e4 100644
--- a/langpacks/czech/Plugins/Facebook.txt
+++ b/langpacks/czech/Plugins/Facebook.txt
@@ -84,6 +84,15 @@ Použít lokální čas počítače pro příchozí zprávy
 Pro otevírání odkazů použít tento server:

 [Allow posting statuses to my pages (may slow down login)]

 Umožnit sdílení stavů na mé stránky (může zpomalit přihlašování)

+;file \protocols\FacebookRM\src\chat.cpp

+[&Invite user...]

+Pozvat k d&iskusi...

+[&Leave chat session]

+&Opustit diskusi

+[User &details]

+&Detaily uživatele

+[User &history]

+Zobrazit &historii

 ;file \protocols\FacebookRM\src\communication.cpp

 [Login error: %s]

 Chyba připojení: %s

@@ -91,14 +100,14 @@ Chyba připojení: %s
 Neznámá chyba

 [Login error: Invalid request.]

 Chyba připojení: Neplatný požadavek.

-[Your account requires HTTPS connection. Activating.]

-Váš účet vyžaduje zabezpečené spojení. Aktivováno.

 [Login error: Some Facebook things are required.]

 Chyba připojení: Něco je vyžadováno.

 [Login error: Captcha code is required. Bad login credentials?]

 Chyba připojení: Je vyžadována captcha. Špatné přihlašovací údaje?

 [Login error, probably bad login credentials.]

 Chyba při přihlašování, možná máte špatné přihlašovací údaje.

+[Your account requires HTTPS connection. Activating.]

+Váš účet vyžaduje zabezpečené spojení. Aktivováno.

 [Something happened to Facebook. Maybe there was some major update so you should wait for an update.]

 Chyba při připojování k síti Facebook. Důvodem mohou být větší změny na straně serveru, což vyžaduje zároveň změny na straně Mirandy.

 [Need confirmation for sending messages to other clients.\nOpen facebook website and try to send message to this contact again!]

@@ -184,6 +193,8 @@ fotky
 fotku

 [User sent you %s:]

 Uživatel vám poslal %s:

+[Message read: %s by %s]

+Zpráva byla přečtena: %s - %s

 [Message read: %s]

 Zpráva byla přečtena: %s

 ;file \protocols\FacebookRM\src\messages.cpp

diff --git a/langpacks/czech/Plugins/GTalkExt.txt b/langpacks/czech/Plugins/GTalkExt.txt
index c6ef5fd0ca..24cd191c2e 100644
--- a/langpacks/czech/Plugins/GTalkExt.txt
+++ b/langpacks/czech/Plugins/GTalkExt.txt
@@ -2,7 +2,7 @@
 ;============================================================

 ;  File: GTalkExt.dll

 ;  Plugin: GTalk Extension

-;  Version: 0.0.1.1

+;  Version: 0.1.0.2

 ;  Authors: bems

 ;============================================================

 [GTalk extensions for Jabber protocol]

@@ -14,6 +14,12 @@
 

 [Use this if your popup plugin does not correctly detect fullscreen mode. It will take away your keyboard focus]

 

+[Notify in contact list]

+

+[Clear pseudocontact history before adding new events]

+

+[Mark history event read when popup closed]

+

 [Add message snip to notification]

 

 [Try to login before open mailbox]

@@ -43,9 +49,6 @@ Ověřit
 ;file \protocols\GTalkExt\src\menu.cpp

 [Open mailbox]

 Přečíst poštu

-;file \protocols\GTalkExt\src\notifications.cpp

-[You've received an e-mail\n%s unread threads]

-

 ;file \protocols\GTalkExt\src\options.cpp

 [Popups]

 Oznámení

diff --git a/langpacks/czech/Plugins/Jabber.txt b/langpacks/czech/Plugins/Jabber.txt
index f0fc865dca..37410e00c0 100644
--- a/langpacks/czech/Plugins/Jabber.txt
+++ b/langpacks/czech/Plugins/Jabber.txt
@@ -455,6 +455,8 @@ Text rámečku
 Jabber aktivita

 [Jabber Mood]

 Jabber nálada

+[Fatal error, image services not found. Flags Module will be disabled.]

+

 ;file \protocols\JabberG\src\jabber.h

 [I'm happy Miranda NG user. Get it at http://miranda-ng.org/.]

 Jsem šťastný uživatel Mirandy NG. Stáhněte si ji z http://miranda-ng.org/.

@@ -585,8 +587,6 @@ Podporuje rozšíření poznámky Miranda NG
 Podporuje Jingle

 [Supports Roster Exchange]

 Podporuje výměnu seznamů na serveru

-[Supports GTalk private multi-user chat]

-Podporuje důvěrný režim

 ;file \protocols\JabberG\src\jabber_captcha.cpp

 [Enter the text you see]

 Zadejte text, který vidíte

diff --git a/langpacks/czech/Plugins/MirFox.txt b/langpacks/czech/Plugins/MirFox.txt
index 4148be5ba2..ebe8f18eac 100644
--- a/langpacks/czech/Plugins/MirFox.txt
+++ b/langpacks/czech/Plugins/MirFox.txt
@@ -18,7 +18,7 @@ při kliknutí pravým tlačítkem myši
 

 [Firefox profiles]

 

-[Show Miranda menu only in these firefox profiles (comma delimited)]

+[Show Miranda menu only in these Firefox profiles (comma delimited)]

 

 [Show these contacts in 'Send ... to' option in Firefox]

 

diff --git a/langpacks/czech/Plugins/NimContact.txt b/langpacks/czech/Plugins/NimContact.txt
index 9b39109620..680e8c56f9 100644
--- a/langpacks/czech/Plugins/NimContact.txt
+++ b/langpacks/czech/Plugins/NimContact.txt
@@ -122,7 +122,7 @@ Vyberte požadovanou složku
 [New Non-IM Contact]

 

 ;file \plugins\Non-IM Contact\src\dialog.cpp

-[String replacing variables....\r\nThe following are all the valid variables that can be used. Refer to the readme for a proper explanation.\r\n\r\nfile(X)\t\t<- specifies the file to read from. MUST be followed by either start() or end() or wholeline()\r\nfilename(X)\t<- copies the filename of file X.\r\nstart(...)\t\t<- specifies where to start copying from.\r\nend(...)\t\t<- specifies where to stop copying.\r\nwholeline(line(...))\t<- specifies a whole line to copy\r\n\r\nstart() and end() explained\r\n.........................\r\nMUST start with line() followed by a number or a string inside " marks, OR csv(separatorX) variable. The number specifies which character in the line to start/end copying. The string specifies a string in the line to start/end copying.\r\n\r\ncsv(seperatorX) explained...\r\nSeperator is either "tab" or "space" or any SINGLE character. X is the Xth seperator to pass before copying, (or to stop before).\r\n\r\nLastly the line(...) variable...\r\nInside the brackets must be either a number (to specify the line number), or a string inside " marks (to use the line with that string), or lastline(X). The X in lastline is the Xth line above the last line. i.e lastline(1) will use the 2nd last line of the file. If searching for a line with "some words" you may put a + or - X after the closing ) i.e line("some words")+3 to go 3 lines after the line with "some words".\r\n\r\nSome Examples...\r\nfilename(0)    <- will display the filename of the 0th file\r\nfile(0)wholeline(line(0)))    <- will display the whole first line of the 0th file\r\nfile(0)wholeline(line("hello")-1)))    <- the wholeline above the first occurance of "hello" in the file\r\nfile(0)start(line(lastline(1))csv(tab2))end(line(lastline())csv(tab4)))    <- starts at the 2nd last line of the file, from the 2nd tab variable, until the 4th tab variable in the last line (in the 0th file)\r\nfile(0)start(line("hello")+1"zzzz")end(line(6)17))    <- starts from the first occurance of zzzz in the line after the first occurance of hello, untill the 17th character in the 6th line (starting from line 0) of the 0th file.\r\n]

+[String replacing variables....\r\nThe following are all the valid variables that can be used. Refer to the readme for a proper explanation.\r\n\r\nfile(X)\t\t<- specifies the file to read from. MUST be followed by either start() or end() or wholeline()\r\nfilename(X)\t<- copies the filename of file X.\r\nstart(...)\t\t<- specifies where to start copying from.\r\nend(...)\t\t<- specifies where to stop copying.\r\nwholeline(line(...))\t<- specifies a whole line to copy\r\n\r\nstart() and end() explained\r\n.........................\r\nMUST start with line() followed by a number or a string inside " marks, OR csv(separatorX) variable. The number specifies which character in the line to start/end copying. The string specifies a string in the line to start/end copying.\r\n\r\ncsv(seperatorX) explained...\r\nSeperator is either "tab" or "space" or any SINGLE character. X is the Xth seperator to pass before copying, (or to stop before).\r\n\r\nLastly the line(...) variable...\r\nInside the brackets must be either a number (to specify the line number), or a string inside " marks (to use the line with that string), or lastline(X). The X in lastline is the Xth line above the last line. i.e lastline(1) will use the 2nd last line of the file. If searching for a line with "some words" you may put a + or - X after the closing ) i.e line("some words")+3 to go 3 lines after the line with "some words".\r\n\r\nSome Examples...\r\nfilename(0)    <- will display the filename of the 0th file\r\nfile(0)wholeline(line(0)))    <- will display the whole first line of the 0th file\r\nfile(0)wholeline(line("hello")-1)))    <- the wholeline above the first occurance of "hello" in the file\r\nfile(0)start(line(lastline(1))csv(tab2))end(line(lastline())csv(tab4)))    <- starts at the 2nd last line of the file, from the 2nd tab variable, until the 4th tab variable in the last line (in the 0th file)\r\nfile(0)start(line("hello")+1"zzzz")end(line(6)17))    <- starts from the first occurance of zzzz in the line after the first occurance of hello, until the 17th character in the 6th line (starting from line 0) of the 0th file.\r\n]

 

 [Contacts Display Info]

 

diff --git a/langpacks/czech/Plugins/ShlExt.txt b/langpacks/czech/Plugins/ShlExt.txt
index 7b3305c3e5..12a8ad3b0f 100644
--- a/langpacks/czech/Plugins/ShlExt.txt
+++ b/langpacks/czech/Plugins/ShlExt.txt
@@ -2,7 +2,7 @@
 ;============================================================

 ;  File: ShlExt.dll

 ;  Plugin: Shell extension

-;  Version: 2.2.0.2

+;  Version: 2.2.0.3

 ;  Authors: Sam Kothari, Miranda NG Team

 ;============================================================

 [Windows Explorer extension for Miranda NG.]

diff --git a/langpacks/czech/Plugins/SimpleStatusMsg.txt b/langpacks/czech/Plugins/SimpleStatusMsg.txt
index b3c7762b39..0cf86c74d4 100644
--- a/langpacks/czech/Plugins/SimpleStatusMsg.txt
+++ b/langpacks/czech/Plugins/SimpleStatusMsg.txt
@@ -55,7 +55,7 @@ Přiřadit výchozí zprávu do seznamu
 [Variables]

 Proměnné

 [Update variables in status messages every]

-Aktualizovat proměnné ve zprávě stavu každých

+Aktualizovat proměnné ve zprávě stavu co

 [seconds]

 sek.

 [Do not update variables during idle]

diff --git a/langpacks/czech/Plugins/TabSRMM.txt b/langpacks/czech/Plugins/TabSRMM.txt
index ed5266e028..70ae58a432 100644
--- a/langpacks/czech/Plugins/TabSRMM.txt
+++ b/langpacks/czech/Plugins/TabSRMM.txt
@@ -1828,8 +1828,6 @@ Editovat poznámky k uživateli|Editujete poznámky k uživateli. Klikněte na t
 

 [Aero peek warning|You have enabled Aero Peek features and loaded a custom container window skin\n\nThis can result in minor visual anomalies in the live preview feature.]

 Aero náhled - varování|Máte povolen Aero náhled a nahrán vlastní styl kontejneru\n\nTo může vést k vedlejším vizuálním anomáliím.

-[TabSRMM group chat module|TabSRMM could not enable its group chat module. The most likely cause is that you have installed and enabled \\b1chat.dll\\b0  or another plugin that provides groupchat services.\n\nShould I try to fix this now \\b1(a restart of Miranda is required to apply these changes)?\\b0]

-

 [Filetransfer problem|Sending the image by file transfer failed.\n\nPossible reasons: File transfers not supported, either you or the target contact is offline, or you are invisible and the target contact is not on your visibilty list.]

 

 [Settings problem|The option \\b1 History->Imitate IEView API\\b0  is enabled and the History++ plugin is active. This can cause problems when using IEView as message log viewer.\n\nShould I correct the option (a restart is required)?]

diff --git a/langpacks/czech/Plugins/Variables.txt b/langpacks/czech/Plugins/Variables.txt
index 5be1ca4aef..5c25de1047 100644
--- a/langpacks/czech/Plugins/Variables.txt
+++ b/langpacks/czech/Plugins/Variables.txt
@@ -90,10 +90,6 @@ Externí programy
 Zjistí název skladby právě přehrávané programem Winamp

 [retrieves current Winamp state (Playing/Paused/Stopped)]

 Zjistí aktuální stav přehrávače Winamp (přehrává/pauza/zastaveno)

-[retrieves info from AMIP (x is var_<variable> with any AMIP variable)]

-

-[retrieves info from AMIP (x is AMIP format string)]

-

 ;file \plugins\Variables\src\parse_inet.cpp

 [Internet Related]

 Internet

@@ -379,11 +375,4 @@ text ze schránky
 

 [only stores y as variables x]

 pouze uloží y jako proměnnou x

-;file \plugins\Variables\src\parse_xml.cpp

-[XML]

-

-[apply stylesheet file x to document file y]

-

-[apply stylesheet x to document y]

-

 ;file \plugins\Variables\src\variables.cpp