diff options
Diffstat (limited to 'libs/libcurl/src/http.c')
-rw-r--r-- | libs/libcurl/src/http.c | 3527 |
1 files changed, 3527 insertions, 0 deletions
diff --git a/libs/libcurl/src/http.c b/libs/libcurl/src/http.c new file mode 100644 index 0000000000..a147181d5d --- /dev/null +++ b/libs/libcurl/src/http.c @@ -0,0 +1,3527 @@ +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at http://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ + +#include "curl_setup.h" + +#ifndef CURL_DISABLE_HTTP + +#ifdef HAVE_NETINET_IN_H +#include <netinet/in.h> +#endif + +#ifdef HAVE_NETDB_H +#include <netdb.h> +#endif +#ifdef HAVE_ARPA_INET_H +#include <arpa/inet.h> +#endif +#ifdef HAVE_NET_IF_H +#include <net/if.h> +#endif +#ifdef HAVE_SYS_IOCTL_H +#include <sys/ioctl.h> +#endif + +#ifdef HAVE_SYS_PARAM_H +#include <sys/param.h> +#endif + +#include "urldata.h" +#include <curl/curl.h> +#include "transfer.h" +#include "sendf.h" +#include "formdata.h" +#include "progress.h" +#include "curl_base64.h" +#include "cookie.h" +#include "strequal.h" +#include "sslgen.h" +#include "http_digest.h" +#include "curl_ntlm.h" +#include "curl_ntlm_wb.h" +#include "http_negotiate.h" +#include "url.h" +#include "share.h" +#include "hostip.h" +#include "http.h" +#include "curl_memory.h" +#include "select.h" +#include "parsedate.h" /* for the week day and month names */ +#include "strtoofft.h" +#include "multiif.h" +#include "rawstr.h" +#include "content_encoding.h" +#include "http_proxy.h" +#include "warnless.h" +#include "non-ascii.h" +#include "bundles.h" +#include "pipeline.h" +#include "http2.h" + +#define _MPRINTF_REPLACE /* use our functions only */ +#include <curl/mprintf.h> + +/* The last #include file should be: */ +#include "memdebug.h" + +/* + * Forward declarations. + */ + +static int http_getsock_do(struct connectdata *conn, + curl_socket_t *socks, + int numsocks); +static int http_should_fail(struct connectdata *conn); + +#ifdef USE_SSL +static CURLcode https_connecting(struct connectdata *conn, bool *done); +static int https_getsock(struct connectdata *conn, + curl_socket_t *socks, + int numsocks); +#else +#define https_connecting(x,y) CURLE_COULDNT_CONNECT +#endif + +/* + * HTTP handler interface. + */ +const struct Curl_handler Curl_handler_http = { + "HTTP", /* scheme */ + Curl_http_setup_conn, /* setup_connection */ + Curl_http, /* do_it */ + Curl_http_done, /* done */ + ZERO_NULL, /* do_more */ + Curl_http_connect, /* connect_it */ + ZERO_NULL, /* connecting */ + ZERO_NULL, /* doing */ + ZERO_NULL, /* proto_getsock */ + http_getsock_do, /* doing_getsock */ + ZERO_NULL, /* domore_getsock */ + ZERO_NULL, /* perform_getsock */ + ZERO_NULL, /* disconnect */ + ZERO_NULL, /* readwrite */ + PORT_HTTP, /* defport */ + CURLPROTO_HTTP, /* protocol */ + PROTOPT_NONE /* flags */ +}; + +#ifdef USE_SSL +/* + * HTTPS handler interface. + */ +const struct Curl_handler Curl_handler_https = { + "HTTPS", /* scheme */ + Curl_http_setup_conn, /* setup_connection */ + Curl_http, /* do_it */ + Curl_http_done, /* done */ + ZERO_NULL, /* do_more */ + Curl_http_connect, /* connect_it */ + https_connecting, /* connecting */ + ZERO_NULL, /* doing */ + https_getsock, /* proto_getsock */ + http_getsock_do, /* doing_getsock */ + ZERO_NULL, /* domore_getsock */ + ZERO_NULL, /* perform_getsock */ + ZERO_NULL, /* disconnect */ + ZERO_NULL, /* readwrite */ + PORT_HTTPS, /* defport */ + CURLPROTO_HTTP | CURLPROTO_HTTPS, /* protocol */ + PROTOPT_SSL /* flags */ +}; +#endif + + +CURLcode Curl_http_setup_conn(struct connectdata *conn) +{ + /* allocate the HTTP-specific struct for the SessionHandle, only to survive + during this request */ + DEBUGASSERT(conn->data->req.protop == NULL); + + conn->data->req.protop = calloc(1, sizeof(struct HTTP)); + if(!conn->data->req.protop) + return CURLE_OUT_OF_MEMORY; + + return CURLE_OK; +} + +/* + * checkheaders() checks the linked list of custom HTTP headers for a + * particular header (prefix). + * + * Returns a pointer to the first matching header or NULL if none matched. + */ +char *Curl_checkheaders(struct SessionHandle *data, const char *thisheader) +{ + struct curl_slist *head; + size_t thislen = strlen(thisheader); + + for(head = data->set.headers; head; head=head->next) { + if(Curl_raw_nequal(head->data, thisheader, thislen)) + return head->data; + } + return NULL; +} + +/* + * Strip off leading and trailing whitespace from the value in the + * given HTTP header line and return a strdupped copy. Returns NULL in + * case of allocation failure. Returns an empty string if the header value + * consists entirely of whitespace. + */ +static char *copy_header_value(const char *h) +{ + const char *start; + const char *end; + char *value; + size_t len; + + DEBUGASSERT(h); + + /* Find the end of the header name */ + while(*h && (*h != ':')) + ++h; + + if(*h) + /* Skip over colon */ + ++h; + + /* Find the first non-space letter */ + start = h; + while(*start && ISSPACE(*start)) + start++; + + /* data is in the host encoding so + use '\r' and '\n' instead of 0x0d and 0x0a */ + end = strchr(start, '\r'); + if(!end) + end = strchr(start, '\n'); + if(!end) + end = strchr(start, '\0'); + if(!end) + return NULL; + + /* skip all trailing space letters */ + while((end > start) && ISSPACE(*end)) + end--; + + /* get length of the type */ + len = end-start+1; + + value = malloc(len + 1); + if(!value) + return NULL; + + memcpy(value, start, len); + value[len] = 0; /* zero terminate */ + + return value; +} + +/* + * http_output_basic() sets up an Authorization: header (or the proxy version) + * for HTTP Basic authentication. + * + * Returns CURLcode. + */ +static CURLcode http_output_basic(struct connectdata *conn, bool proxy) +{ + size_t size = 0; + char *authorization = NULL; + struct SessionHandle *data = conn->data; + char **userp; + const char *user; + const char *pwd; + CURLcode error; + + if(proxy) { + userp = &conn->allocptr.proxyuserpwd; + user = conn->proxyuser; + pwd = conn->proxypasswd; + } + else { + userp = &conn->allocptr.userpwd; + user = conn->user; + pwd = conn->passwd; + } + + snprintf(data->state.buffer, sizeof(data->state.buffer), "%s:%s", user, pwd); + + error = Curl_base64_encode(data, + data->state.buffer, strlen(data->state.buffer), + &authorization, &size); + if(error) + return error; + + if(!authorization) + return CURLE_REMOTE_ACCESS_DENIED; + + Curl_safefree(*userp); + *userp = aprintf("%sAuthorization: Basic %s\r\n", + proxy?"Proxy-":"", + authorization); + free(authorization); + if(!*userp) + return CURLE_OUT_OF_MEMORY; + + return CURLE_OK; +} + +/* pickoneauth() selects the most favourable authentication method from the + * ones available and the ones we want. + * + * return TRUE if one was picked + */ +static bool pickoneauth(struct auth *pick) +{ + bool picked; + /* only deal with authentication we want */ + unsigned long avail = pick->avail & pick->want; + picked = TRUE; + + /* The order of these checks is highly relevant, as this will be the order + of preference in case of the existence of multiple accepted types. */ + if(avail & CURLAUTH_GSSNEGOTIATE) + pick->picked = CURLAUTH_GSSNEGOTIATE; + else if(avail & CURLAUTH_DIGEST) + pick->picked = CURLAUTH_DIGEST; + else if(avail & CURLAUTH_NTLM) + pick->picked = CURLAUTH_NTLM; + else if(avail & CURLAUTH_NTLM_WB) + pick->picked = CURLAUTH_NTLM_WB; + else if(avail & CURLAUTH_BASIC) + pick->picked = CURLAUTH_BASIC; + else { + pick->picked = CURLAUTH_PICKNONE; /* we select to use nothing */ + picked = FALSE; + } + pick->avail = CURLAUTH_NONE; /* clear it here */ + + return picked; +} + +/* + * Curl_http_perhapsrewind() + * + * If we are doing POST or PUT { + * If we have more data to send { + * If we are doing NTLM { + * Keep sending since we must not disconnect + * } + * else { + * If there is more than just a little data left to send, close + * the current connection by force. + * } + * } + * If we have sent any data { + * If we don't have track of all the data { + * call app to tell it to rewind + * } + * else { + * rewind internally so that the operation can restart fine + * } + * } + * } + */ +static CURLcode http_perhapsrewind(struct connectdata *conn) +{ + struct SessionHandle *data = conn->data; + struct HTTP *http = data->req.protop; + curl_off_t bytessent; + curl_off_t expectsend = -1; /* default is unknown */ + + if(!http) + /* If this is still NULL, we have not reach very far and we can safely + skip this rewinding stuff */ + return CURLE_OK; + + switch(data->set.httpreq) { + case HTTPREQ_GET: + case HTTPREQ_HEAD: + return CURLE_OK; + default: + break; + } + + bytessent = http->writebytecount; + + if(conn->bits.authneg) + /* This is a state where we are known to be negotiating and we don't send + any data then. */ + expectsend = 0; + else { + /* figure out how much data we are expected to send */ + switch(data->set.httpreq) { + case HTTPREQ_POST: + if(data->set.postfieldsize != -1) + expectsend = data->set.postfieldsize; + else if(data->set.postfields) + expectsend = (curl_off_t)strlen(data->set.postfields); + break; + case HTTPREQ_PUT: + if(data->set.infilesize != -1) + expectsend = data->set.infilesize; + break; + case HTTPREQ_POST_FORM: + expectsend = http->postsize; + break; + default: + break; + } + } + + conn->bits.rewindaftersend = FALSE; /* default */ + + if((expectsend == -1) || (expectsend > bytessent)) { + /* There is still data left to send */ + if((data->state.authproxy.picked == CURLAUTH_NTLM) || + (data->state.authhost.picked == CURLAUTH_NTLM) || + (data->state.authproxy.picked == CURLAUTH_NTLM_WB) || + (data->state.authhost.picked == CURLAUTH_NTLM_WB)) { + if(((expectsend - bytessent) < 2000) || + (conn->ntlm.state != NTLMSTATE_NONE) || + (conn->proxyntlm.state != NTLMSTATE_NONE)) { + /* The NTLM-negotiation has started *OR* there is just a little (<2K) + data left to send, keep on sending. */ + + /* rewind data when completely done sending! */ + if(!conn->bits.authneg) { + conn->bits.rewindaftersend = TRUE; + infof(data, "Rewind stream after send\n"); + } + + return CURLE_OK; + } + if(conn->bits.close) + /* this is already marked to get closed */ + return CURLE_OK; + + infof(data, "NTLM send, close instead of sending %" FORMAT_OFF_T + " bytes\n", (curl_off_t)(expectsend - bytessent)); + } + + /* This is not NTLM or many bytes left to send: close + */ + conn->bits.close = TRUE; + data->req.size = 0; /* don't download any more than 0 bytes */ + + /* There still is data left to send, but this connection is marked for + closure so we can safely do the rewind right now */ + } + + if(bytessent) + /* we rewind now at once since if we already sent something */ + return Curl_readrewind(conn); + + return CURLE_OK; +} + +/* + * Curl_http_auth_act() gets called when all HTTP headers have been received + * and it checks what authentication methods that are available and decides + * which one (if any) to use. It will set 'newurl' if an auth method was + * picked. + */ + +CURLcode Curl_http_auth_act(struct connectdata *conn) +{ + struct SessionHandle *data = conn->data; + bool pickhost = FALSE; + bool pickproxy = FALSE; + CURLcode code = CURLE_OK; + + if(100 <= data->req.httpcode && 199 >= data->req.httpcode) + /* this is a transient response code, ignore */ + return CURLE_OK; + + if(data->state.authproblem) + return data->set.http_fail_on_error?CURLE_HTTP_RETURNED_ERROR:CURLE_OK; + + if(conn->bits.user_passwd && + ((data->req.httpcode == 401) || + (conn->bits.authneg && data->req.httpcode < 300))) { + pickhost = pickoneauth(&data->state.authhost); + if(!pickhost) + data->state.authproblem = TRUE; + } + if(conn->bits.proxy_user_passwd && + ((data->req.httpcode == 407) || + (conn->bits.authneg && data->req.httpcode < 300))) { + pickproxy = pickoneauth(&data->state.authproxy); + if(!pickproxy) + data->state.authproblem = TRUE; + } + + if(pickhost || pickproxy) { + /* In case this is GSS auth, the newurl field is already allocated so + we must make sure to free it before allocating a new one. As figured + out in bug #2284386 */ + Curl_safefree(data->req.newurl); + data->req.newurl = strdup(data->change.url); /* clone URL */ + if(!data->req.newurl) + return CURLE_OUT_OF_MEMORY; + + if((data->set.httpreq != HTTPREQ_GET) && + (data->set.httpreq != HTTPREQ_HEAD) && + !conn->bits.rewindaftersend) { + code = http_perhapsrewind(conn); + if(code) + return code; + } + } + + else if((data->req.httpcode < 300) && + (!data->state.authhost.done) && + conn->bits.authneg) { + /* no (known) authentication available, + authentication is not "done" yet and + no authentication seems to be required and + we didn't try HEAD or GET */ + if((data->set.httpreq != HTTPREQ_GET) && + (data->set.httpreq != HTTPREQ_HEAD)) { + data->req.newurl = strdup(data->change.url); /* clone URL */ + if(!data->req.newurl) + return CURLE_OUT_OF_MEMORY; + data->state.authhost.done = TRUE; + } + } + if(http_should_fail(conn)) { + failf (data, "The requested URL returned error: %d", + data->req.httpcode); + code = CURLE_HTTP_RETURNED_ERROR; + } + + return code; +} + + +/* + * Output the correct authentication header depending on the auth type + * and whether or not it is to a proxy. + */ +static CURLcode +output_auth_headers(struct connectdata *conn, + struct auth *authstatus, + const char *request, + const char *path, + bool proxy) +{ + struct SessionHandle *data = conn->data; + const char *auth=NULL; + CURLcode result = CURLE_OK; +#ifdef USE_HTTP_NEGOTIATE + struct negotiatedata *negdata = proxy? + &data->state.proxyneg:&data->state.negotiate; +#endif + +#ifdef CURL_DISABLE_CRYPTO_AUTH + (void)request; + (void)path; +#endif + +#ifdef USE_HTTP_NEGOTIATE + negdata->state = GSS_AUTHNONE; + if((authstatus->picked == CURLAUTH_GSSNEGOTIATE) && + negdata->context && !GSS_ERROR(negdata->status)) { + auth="GSS-Negotiate"; + result = Curl_output_negotiate(conn, proxy); + if(result) + return result; + authstatus->done = TRUE; + negdata->state = GSS_AUTHSENT; + } + else +#endif +#ifdef USE_NTLM + if(authstatus->picked == CURLAUTH_NTLM) { + auth="NTLM"; + result = Curl_output_ntlm(conn, proxy); + if(result) + return result; + } + else +#endif +#if defined(USE_NTLM) && defined(NTLM_WB_ENABLED) + if(authstatus->picked == CURLAUTH_NTLM_WB) { + auth="NTLM_WB"; + result = Curl_output_ntlm_wb(conn, proxy); + if(result) + return result; + } + else +#endif +#ifndef CURL_DISABLE_CRYPTO_AUTH + if(authstatus->picked == CURLAUTH_DIGEST) { + auth="Digest"; + result = Curl_output_digest(conn, + proxy, + (const unsigned char *)request, + (const unsigned char *)path); + if(result) + return result; + } + else +#endif + if(authstatus->picked == CURLAUTH_BASIC) { + /* Basic */ + if((proxy && conn->bits.proxy_user_passwd && + !Curl_checkheaders(data, "Proxy-authorization:")) || + (!proxy && conn->bits.user_passwd && + !Curl_checkheaders(data, "Authorization:"))) { + auth="Basic"; + result = http_output_basic(conn, proxy); + if(result) + return result; + } + /* NOTE: this function should set 'done' TRUE, as the other auth + functions work that way */ + authstatus->done = TRUE; + } + + if(auth) { + infof(data, "%s auth using %s with user '%s'\n", + proxy?"Proxy":"Server", auth, + proxy?(conn->proxyuser?conn->proxyuser:""): + (conn->user?conn->user:"")); + authstatus->multi = (!authstatus->done) ? TRUE : FALSE; + } + else + authstatus->multi = FALSE; + + return CURLE_OK; +} + +/** + * Curl_http_output_auth() setups the authentication headers for the + * host/proxy and the correct authentication + * method. conn->data->state.authdone is set to TRUE when authentication is + * done. + * + * @param conn all information about the current connection + * @param request pointer to the request keyword + * @param path pointer to the requested path + * @param proxytunnel boolean if this is the request setting up a "proxy + * tunnel" + * + * @returns CURLcode + */ +CURLcode +Curl_http_output_auth(struct connectdata *conn, + const char *request, + const char *path, + bool proxytunnel) /* TRUE if this is the request setting + up the proxy tunnel */ +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + struct auth *authhost; + struct auth *authproxy; + + DEBUGASSERT(data); + + authhost = &data->state.authhost; + authproxy = &data->state.authproxy; + + if((conn->bits.httpproxy && conn->bits.proxy_user_passwd) || + conn->bits.user_passwd) + /* continue please */ ; + else { + authhost->done = TRUE; + authproxy->done = TRUE; + return CURLE_OK; /* no authentication with no user or password */ + } + + if(authhost->want && !authhost->picked) + /* The app has selected one or more methods, but none has been picked + so far by a server round-trip. Then we set the picked one to the + want one, and if this is one single bit it'll be used instantly. */ + authhost->picked = authhost->want; + + if(authproxy->want && !authproxy->picked) + /* The app has selected one or more methods, but none has been picked so + far by a proxy round-trip. Then we set the picked one to the want one, + and if this is one single bit it'll be used instantly. */ + authproxy->picked = authproxy->want; + +#ifndef CURL_DISABLE_PROXY + /* Send proxy authentication header if needed */ + if(conn->bits.httpproxy && + (conn->bits.tunnel_proxy == proxytunnel)) { + result = output_auth_headers(conn, authproxy, request, path, TRUE); + if(result) + return result; + } + else +#else + (void)proxytunnel; +#endif /* CURL_DISABLE_PROXY */ + /* we have no proxy so let's pretend we're done authenticating + with it */ + authproxy->done = TRUE; + + /* To prevent the user+password to get sent to other than the original + host due to a location-follow, we do some weirdo checks here */ + if(!data->state.this_is_a_follow || + conn->bits.netrc || + !data->state.first_host || + data->set.http_disable_hostname_check_before_authentication || + Curl_raw_equal(data->state.first_host, conn->host.name)) { + result = output_auth_headers(conn, authhost, request, path, FALSE); + } + else + authhost->done = TRUE; + + return result; +} + + +/* + * Curl_http_input_auth() deals with Proxy-Authenticate: and WWW-Authenticate: + * headers. They are dealt with both in the transfer.c main loop and in the + * proxy CONNECT loop. + */ + +CURLcode Curl_http_input_auth(struct connectdata *conn, + int httpcode, + const char *header) /* the first non-space */ +{ + /* + * This resource requires authentication + */ + struct SessionHandle *data = conn->data; + + unsigned long *availp; + const char *start; + struct auth *authp; + + if(httpcode == 407) { + start = header+strlen("Proxy-authenticate:"); + availp = &data->info.proxyauthavail; + authp = &data->state.authproxy; + } + else { + start = header+strlen("WWW-Authenticate:"); + availp = &data->info.httpauthavail; + authp = &data->state.authhost; + } + + /* pass all white spaces */ + while(*start && ISSPACE(*start)) + start++; + + /* + * Here we check if we want the specific single authentication (using ==) and + * if we do, we initiate usage of it. + * + * If the provided authentication is wanted as one out of several accepted + * types (using &), we OR this authentication type to the authavail + * variable. + * + * Note: + * + * ->picked is first set to the 'want' value (one or more bits) before the + * request is sent, and then it is again set _after_ all response 401/407 + * headers have been received but then only to a single preferred method + * (bit). + * + */ + + while(*start) { +#ifdef USE_HTTP_NEGOTIATE + if(checkprefix("GSS-Negotiate", start) || + checkprefix("Negotiate", start)) { + int neg; + *availp |= CURLAUTH_GSSNEGOTIATE; + authp->avail |= CURLAUTH_GSSNEGOTIATE; + + if(authp->picked == CURLAUTH_GSSNEGOTIATE) { + if(data->state.negotiate.state == GSS_AUTHSENT) { + /* if we sent GSS authentication in the outgoing request and we get + this back, we're in trouble */ + infof(data, "Authentication problem. Ignoring this.\n"); + data->state.authproblem = TRUE; + } + else { + neg = Curl_input_negotiate(conn, (bool)(httpcode == 407), start); + if(neg == 0) { + DEBUGASSERT(!data->req.newurl); + data->req.newurl = strdup(data->change.url); + if(!data->req.newurl) + return CURLE_OUT_OF_MEMORY; + data->state.authproblem = FALSE; + /* we received GSS auth info and we dealt with it fine */ + data->state.negotiate.state = GSS_AUTHRECV; + } + else + data->state.authproblem = TRUE; + } + } + } + else +#endif +#ifdef USE_NTLM + /* NTLM support requires the SSL crypto libs */ + if(checkprefix("NTLM", start)) { + *availp |= CURLAUTH_NTLM; + authp->avail |= CURLAUTH_NTLM; + if(authp->picked == CURLAUTH_NTLM || + authp->picked == CURLAUTH_NTLM_WB) { + /* NTLM authentication is picked and activated */ + CURLcode ntlm = + Curl_input_ntlm(conn, (httpcode == 407)?TRUE:FALSE, start); + if(CURLE_OK == ntlm) { + data->state.authproblem = FALSE; +#ifdef NTLM_WB_ENABLED + if(authp->picked == CURLAUTH_NTLM_WB) { + *availp &= ~CURLAUTH_NTLM; + authp->avail &= ~CURLAUTH_NTLM; + *availp |= CURLAUTH_NTLM_WB; + authp->avail |= CURLAUTH_NTLM_WB; + + /* Get the challenge-message which will be passed to + * ntlm_auth for generating the type 3 message later */ + while(*start && ISSPACE(*start)) + start++; + if(checkprefix("NTLM", start)) { + start += strlen("NTLM"); + while(*start && ISSPACE(*start)) + start++; + if(*start) + if((conn->challenge_header = strdup(start)) == NULL) + return CURLE_OUT_OF_MEMORY; + } + } +#endif + } + else { + infof(data, "Authentication problem. Ignoring this.\n"); + data->state.authproblem = TRUE; + } + } + } + else +#endif +#ifndef CURL_DISABLE_CRYPTO_AUTH + if(checkprefix("Digest", start)) { + if((authp->avail & CURLAUTH_DIGEST) != 0) { + infof(data, "Ignoring duplicate digest auth header.\n"); + } + else { + CURLdigest dig; + *availp |= CURLAUTH_DIGEST; + authp->avail |= CURLAUTH_DIGEST; + + /* We call this function on input Digest headers even if Digest + * authentication isn't activated yet, as we need to store the + * incoming data from this header in case we are gonna use + * Digest. */ + dig = Curl_input_digest(conn, (httpcode == 407)?TRUE:FALSE, start); + + if(CURLDIGEST_FINE != dig) { + infof(data, "Authentication problem. Ignoring this.\n"); + data->state.authproblem = TRUE; + } + } + } + else +#endif + if(checkprefix("Basic", start)) { + *availp |= CURLAUTH_BASIC; + authp->avail |= CURLAUTH_BASIC; + if(authp->picked == CURLAUTH_BASIC) { + /* We asked for Basic authentication but got a 40X back + anyway, which basically means our name+password isn't + valid. */ + authp->avail = CURLAUTH_NONE; + infof(data, "Authentication problem. Ignoring this.\n"); + data->state.authproblem = TRUE; + } + } + + /* there may be multiple methods on one line, so keep reading */ + while(*start && *start != ',') /* read up to the next comma */ + start++; + if(*start == ',') /* if we're on a comma, skip it */ + start++; + while(*start && ISSPACE(*start)) + start++; + } + return CURLE_OK; +} + +/** + * http_should_fail() determines whether an HTTP response has gotten us + * into an error state or not. + * + * @param conn all information about the current connection + * + * @retval 0 communications should continue + * + * @retval 1 communications should not continue + */ +static int http_should_fail(struct connectdata *conn) +{ + struct SessionHandle *data; + int httpcode; + + DEBUGASSERT(conn); + data = conn->data; + DEBUGASSERT(data); + + httpcode = data->req.httpcode; + + /* + ** If we haven't been asked to fail on error, + ** don't fail. + */ + if(!data->set.http_fail_on_error) + return 0; + + /* + ** Any code < 400 is never terminal. + */ + if(httpcode < 400) + return 0; + + if(data->state.resume_from && + (data->set.httpreq==HTTPREQ_GET) && + (httpcode == 416)) { + /* "Requested Range Not Satisfiable", just proceed and + pretend this is no error */ + return 0; + } + + /* + ** Any code >= 400 that's not 401 or 407 is always + ** a terminal error + */ + if((httpcode != 401) && + (httpcode != 407)) + return 1; + + /* + ** All we have left to deal with is 401 and 407 + */ + DEBUGASSERT((httpcode == 401) || (httpcode == 407)); + + /* + ** Examine the current authentication state to see if this + ** is an error. The idea is for this function to get + ** called after processing all the headers in a response + ** message. So, if we've been to asked to authenticate a + ** particular stage, and we've done it, we're OK. But, if + ** we're already completely authenticated, it's not OK to + ** get another 401 or 407. + ** + ** It is possible for authentication to go stale such that + ** the client needs to reauthenticate. Once that info is + ** available, use it here. + */ + + /* + ** Either we're not authenticating, or we're supposed to + ** be authenticating something else. This is an error. + */ + if((httpcode == 401) && !conn->bits.user_passwd) + return TRUE; + if((httpcode == 407) && !conn->bits.proxy_user_passwd) + return TRUE; + + return data->state.authproblem; +} + +/* + * readmoredata() is a "fread() emulation" to provide POST and/or request + * data. It is used when a huge POST is to be made and the entire chunk wasn't + * sent in the first send(). This function will then be called from the + * transfer.c loop when more data is to be sent to the peer. + * + * Returns the amount of bytes it filled the buffer with. + */ +static size_t readmoredata(char *buffer, + size_t size, + size_t nitems, + void *userp) +{ + struct connectdata *conn = (struct connectdata *)userp; + struct HTTP *http = conn->data->req.protop; + size_t fullsize = size * nitems; + + if(0 == http->postsize) + /* nothing to return */ + return 0; + + /* make sure that a HTTP request is never sent away chunked! */ + conn->data->req.forbidchunk = (http->sending == HTTPSEND_REQUEST)?TRUE:FALSE; + + if(http->postsize <= (curl_off_t)fullsize) { + memcpy(buffer, http->postdata, (size_t)http->postsize); + fullsize = (size_t)http->postsize; + + if(http->backup.postsize) { + /* move backup data into focus and continue on that */ + http->postdata = http->backup.postdata; + http->postsize = http->backup.postsize; + conn->fread_func = http->backup.fread_func; + conn->fread_in = http->backup.fread_in; + + http->sending++; /* move one step up */ + + http->backup.postsize=0; + } + else + http->postsize = 0; + + return fullsize; + } + + memcpy(buffer, http->postdata, fullsize); + http->postdata += fullsize; + http->postsize -= fullsize; + + return fullsize; +} + +/* ------------------------------------------------------------------------- */ +/* add_buffer functions */ + +/* + * Curl_add_buffer_init() sets up and returns a fine buffer struct + */ +Curl_send_buffer *Curl_add_buffer_init(void) +{ + return calloc(1, sizeof(Curl_send_buffer)); +} + +/* + * Curl_add_buffer_send() sends a header buffer and frees all associated + * memory. Body data may be appended to the header data if desired. + * + * Returns CURLcode + */ +CURLcode Curl_add_buffer_send(Curl_send_buffer *in, + struct connectdata *conn, + + /* add the number of sent bytes to this + counter */ + long *bytes_written, + + /* how much of the buffer contains body data */ + size_t included_body_bytes, + int socketindex) + +{ + ssize_t amount; + CURLcode res; + char *ptr; + size_t size; + struct HTTP *http = conn->data->req.protop; + size_t sendsize; + curl_socket_t sockfd; + size_t headersize; + + DEBUGASSERT(socketindex <= SECONDARYSOCKET); + + sockfd = conn->sock[socketindex]; + + /* The looping below is required since we use non-blocking sockets, but due + to the circumstances we will just loop and try again and again etc */ + + ptr = in->buffer; + size = in->size_used; + + headersize = size - included_body_bytes; /* the initial part that isn't body + is header */ + + DEBUGASSERT(size > included_body_bytes); + + res = Curl_convert_to_network(conn->data, ptr, headersize); + /* Curl_convert_to_network calls failf if unsuccessful */ + if(res) { + /* conversion failed, free memory and return to the caller */ + if(in->buffer) + free(in->buffer); + free(in); + return res; + } + + if(conn->handler->flags & PROTOPT_SSL) { + /* We never send more than CURL_MAX_WRITE_SIZE bytes in one single chunk + when we speak HTTPS, as if only a fraction of it is sent now, this data + needs to fit into the normal read-callback buffer later on and that + buffer is using this size. + */ + + sendsize= (size > CURL_MAX_WRITE_SIZE)?CURL_MAX_WRITE_SIZE:size; + + /* OpenSSL is very picky and we must send the SAME buffer pointer to the + library when we attempt to re-send this buffer. Sending the same data + is not enough, we must use the exact same address. For this reason, we + must copy the data to the uploadbuffer first, since that is the buffer + we will be using if this send is retried later. + */ + memcpy(conn->data->state.uploadbuffer, ptr, sendsize); + ptr = conn->data->state.uploadbuffer; + } + else + sendsize = size; + + res = Curl_write(conn, sockfd, ptr, sendsize, &amount); + + if(CURLE_OK == res) { + /* + * Note that we may not send the entire chunk at once, and we have a set + * number of data bytes at the end of the big buffer (out of which we may + * only send away a part). + */ + /* how much of the header that was sent */ + size_t headlen = (size_t)amount>headersize?headersize:(size_t)amount; + size_t bodylen = amount - headlen; + + if(conn->data->set.verbose) { + /* this data _may_ contain binary stuff */ + Curl_debug(conn->data, CURLINFO_HEADER_OUT, ptr, headlen, conn); + if(bodylen) { + /* there was body data sent beyond the initial header part, pass that + on to the debug callback too */ + Curl_debug(conn->data, CURLINFO_DATA_OUT, + ptr+headlen, bodylen, conn); + } + } + + /* 'amount' can never be a very large value here so typecasting it so a + signed 31 bit value should not cause problems even if ssize_t is + 64bit */ + *bytes_written += (long)amount; + + if(http) { + if(bodylen) + /* since we sent a piece of the body here, up the byte counter for it + accordingly */ + http->writebytecount += bodylen; + if((size_t)amount != size) { + /* The whole request could not be sent in one system call. We must + queue it up and send it later when we get the chance. We must not + loop here and wait until it might work again. */ + + size -= amount; + + ptr = in->buffer + amount; + + /* backup the currently set pointers */ + http->backup.fread_func = conn->fread_func; + http->backup.fread_in = conn->fread_in; + http->backup.postdata = http->postdata; + http->backup.postsize = http->postsize; + + /* set the new pointers for the request-sending */ + conn->fread_func = (curl_read_callback)readmoredata; + conn->fread_in = (void *)conn; + http->postdata = ptr; + http->postsize = (curl_off_t)size; + + http->send_buffer = in; + http->sending = HTTPSEND_REQUEST; + + return CURLE_OK; + } + http->sending = HTTPSEND_BODY; + /* the full buffer was sent, clean up and return */ + } + else { + if((size_t)amount != size) + /* We have no continue-send mechanism now, fail. This can only happen + when this function is used from the CONNECT sending function. We + currently (stupidly) assume that the whole request is always sent + away in the first single chunk. + + This needs FIXing. + */ + return CURLE_SEND_ERROR; + else + conn->writechannel_inuse = FALSE; + } + } + if(in->buffer) + free(in->buffer); + free(in); + + return res; +} + + +/* + * add_bufferf() add the formatted input to the buffer. + */ +CURLcode Curl_add_bufferf(Curl_send_buffer *in, const char *fmt, ...) +{ + char *s; + va_list ap; + va_start(ap, fmt); + s = vaprintf(fmt, ap); /* this allocs a new string to append */ + va_end(ap); + + if(s) { + CURLcode result = Curl_add_buffer(in, s, strlen(s)); + free(s); + return result; + } + /* If we failed, we cleanup the whole buffer and return error */ + if(in->buffer) + free(in->buffer); + free(in); + return CURLE_OUT_OF_MEMORY; +} + +/* + * add_buffer() appends a memory chunk to the existing buffer + */ +CURLcode Curl_add_buffer(Curl_send_buffer *in, const void *inptr, size_t size) +{ + char *new_rb; + size_t new_size; + + if(~size < in->size_used) { + /* If resulting used size of send buffer would wrap size_t, cleanup + the whole buffer and return error. Otherwise the required buffer + size will fit into a single allocatable memory chunk */ + Curl_safefree(in->buffer); + free(in); + return CURLE_OUT_OF_MEMORY; + } + + if(!in->buffer || + ((in->size_used + size) > (in->size_max - 1))) { + + /* If current buffer size isn't enough to hold the result, use a + buffer size that doubles the required size. If this new size + would wrap size_t, then just use the largest possible one */ + + if((size > (size_t)-1/2) || (in->size_used > (size_t)-1/2) || + (~(size*2) < (in->size_used*2))) + new_size = (size_t)-1; + else + new_size = (in->size_used+size)*2; + + if(in->buffer) + /* we have a buffer, enlarge the existing one */ + new_rb = realloc(in->buffer, new_size); + else + /* create a new buffer */ + new_rb = malloc(new_size); + + if(!new_rb) { + /* If we failed, we cleanup the whole buffer and return error */ + Curl_safefree(in->buffer); + free(in); + return CURLE_OUT_OF_MEMORY; + } + + in->buffer = new_rb; + in->size_max = new_size; + } + memcpy(&in->buffer[in->size_used], inptr, size); + + in->size_used += size; + + return CURLE_OK; +} + +/* end of the add_buffer functions */ +/* ------------------------------------------------------------------------- */ + + + +/* + * Curl_compareheader() + * + * Returns TRUE if 'headerline' contains the 'header' with given 'content'. + * Pass headers WITH the colon. + */ +bool +Curl_compareheader(const char *headerline, /* line to check */ + const char *header, /* header keyword _with_ colon */ + const char *content) /* content string to find */ +{ + /* RFC2616, section 4.2 says: "Each header field consists of a name followed + * by a colon (":") and the field value. Field names are case-insensitive. + * The field value MAY be preceded by any amount of LWS, though a single SP + * is preferred." */ + + size_t hlen = strlen(header); + size_t clen; + size_t len; + const char *start; + const char *end; + + if(!Curl_raw_nequal(headerline, header, hlen)) + return FALSE; /* doesn't start with header */ + + /* pass the header */ + start = &headerline[hlen]; + + /* pass all white spaces */ + while(*start && ISSPACE(*start)) + start++; + + /* find the end of the header line */ + end = strchr(start, '\r'); /* lines end with CRLF */ + if(!end) { + /* in case there's a non-standard compliant line here */ + end = strchr(start, '\n'); + + if(!end) + /* hm, there's no line ending here, use the zero byte! */ + end = strchr(start, '\0'); + } + + len = end-start; /* length of the content part of the input line */ + clen = strlen(content); /* length of the word to find */ + + /* find the content string in the rest of the line */ + for(;len>=clen;len--, start++) { + if(Curl_raw_nequal(start, content, clen)) + return TRUE; /* match! */ + } + + return FALSE; /* no match */ +} + +/* + * Curl_http_connect() performs HTTP stuff to do at connect-time, called from + * the generic Curl_connect(). + */ +CURLcode Curl_http_connect(struct connectdata *conn, bool *done) +{ + CURLcode result; + + /* We default to persistent connections. We set this already in this connect + function to make the re-use checks properly be able to check this bit. */ + conn->bits.close = FALSE; + + /* the CONNECT procedure might not have been completed */ + result = Curl_proxy_connect(conn); + if(result) + return result; + + if(conn->tunnel_state[FIRSTSOCKET] == TUNNEL_CONNECT) + /* nothing else to do except wait right now - we're not done here. */ + return CURLE_OK; + + if(conn->given->flags & PROTOPT_SSL) { + /* perform SSL initialization */ + result = https_connecting(conn, done); + if(result) + return result; + } + else + *done = TRUE; + + return CURLE_OK; +} + +/* this returns the socket to wait for in the DO and DOING state for the multi + interface and then we're always _sending_ a request and thus we wait for + the single socket to become writable only */ +static int http_getsock_do(struct connectdata *conn, + curl_socket_t *socks, + int numsocks) +{ + /* write mode */ + (void)numsocks; /* unused, we trust it to be at least 1 */ + socks[0] = conn->sock[FIRSTSOCKET]; + return GETSOCK_WRITESOCK(0); +} + +#ifdef USE_SSL +static CURLcode https_connecting(struct connectdata *conn, bool *done) +{ + CURLcode result; + DEBUGASSERT((conn) && (conn->handler->flags & PROTOPT_SSL)); + + /* perform SSL initialization for this socket */ + result = Curl_ssl_connect_nonblocking(conn, FIRSTSOCKET, done); + if(result) + conn->bits.close = TRUE; /* a failed connection is marked for closure + to prevent (bad) re-use or similar */ + return result; +} +#endif + +#if defined(USE_SSLEAY) || defined(USE_GNUTLS) || defined(USE_SCHANNEL) || \ + defined(USE_DARWINSSL) +/* This function is for OpenSSL, GnuTLS, darwinssl, and schannel only. + It should be made to query the generic SSL layer instead. */ +static int https_getsock(struct connectdata *conn, + curl_socket_t *socks, + int numsocks) +{ + if(conn->handler->flags & PROTOPT_SSL) { + struct ssl_connect_data *connssl = &conn->ssl[FIRSTSOCKET]; + + if(!numsocks) + return GETSOCK_BLANK; + + if(connssl->connecting_state == ssl_connect_2_writing) { + /* write mode */ + socks[0] = conn->sock[FIRSTSOCKET]; + return GETSOCK_WRITESOCK(0); + } + else if(connssl->connecting_state == ssl_connect_2_reading) { + /* read mode */ + socks[0] = conn->sock[FIRSTSOCKET]; + return GETSOCK_READSOCK(0); + } + } + return CURLE_OK; +} +#else +#ifdef USE_SSL +static int https_getsock(struct connectdata *conn, + curl_socket_t *socks, + int numsocks) +{ + (void)conn; + (void)socks; + (void)numsocks; + return GETSOCK_BLANK; +} +#endif /* USE_SSL */ +#endif /* USE_SSLEAY || USE_GNUTLS || USE_SCHANNEL */ + +/* + * Curl_http_done() gets called from Curl_done() after a single HTTP request + * has been performed. + */ + +CURLcode Curl_http_done(struct connectdata *conn, + CURLcode status, bool premature) +{ + struct SessionHandle *data = conn->data; + struct HTTP *http =data->req.protop; + + Curl_unencode_cleanup(conn); + + /* set the proper values (possibly modified on POST) */ + conn->fread_func = data->set.fread_func; /* restore */ + conn->fread_in = data->set.in; /* restore */ + conn->seek_func = data->set.seek_func; /* restore */ + conn->seek_client = data->set.seek_client; /* restore */ + + if(http == NULL) + return CURLE_OK; + + if(http->send_buffer) { + Curl_send_buffer *buff = http->send_buffer; + + free(buff->buffer); + free(buff); + http->send_buffer = NULL; /* clear the pointer */ + } + + if(HTTPREQ_POST_FORM == data->set.httpreq) { + data->req.bytecount = http->readbytecount + http->writebytecount; + + Curl_formclean(&http->sendit); /* Now free that whole lot */ + if(http->form.fp) { + /* a file being uploaded was left opened, close it! */ + fclose(http->form.fp); + http->form.fp = NULL; + } + } + else if(HTTPREQ_PUT == data->set.httpreq) + data->req.bytecount = http->readbytecount + http->writebytecount; + + if(status != CURLE_OK) + return (status); + + if(!premature && /* this check is pointless when DONE is called before the + entire operation is complete */ + !conn->bits.retry && + !data->set.connect_only && + ((http->readbytecount + + data->req.headerbytecount - + data->req.deductheadercount)) <= 0) { + /* If this connection isn't simply closed to be retried, AND nothing was + read from the HTTP server (that counts), this can't be right so we + return an error here */ + failf(data, "Empty reply from server"); + return CURLE_GOT_NOTHING; + } + + return CURLE_OK; +} + + +/* + * Determine if we should use HTTP 1.1 (OR BETTER) for this request. Reasons + * to avoid it include: + * + * - if the user specifically requested HTTP 1.0 + * - if the server we are connected to only supports 1.0 + * - if any server previously contacted to handle this request only supports + * 1.0. + */ +static bool use_http_1_1plus(const struct SessionHandle *data, + const struct connectdata *conn) +{ + return ((data->set.httpversion >= CURL_HTTP_VERSION_1_1) || + ((data->set.httpversion != CURL_HTTP_VERSION_1_0) && + ((conn->httpversion == 11) || + ((conn->httpversion != 10) && + (data->state.httpversion != 10))))) ? TRUE : FALSE; +} + +/* check and possibly add an Expect: header */ +static CURLcode expect100(struct SessionHandle *data, + struct connectdata *conn, + Curl_send_buffer *req_buffer) +{ + CURLcode result = CURLE_OK; + const char *ptr; + data->state.expect100header = FALSE; /* default to false unless it is set + to TRUE below */ + if(use_http_1_1plus(data, conn)) { + /* if not doing HTTP 1.0 or disabled explicitly, we add a Expect: + 100-continue to the headers which actually speeds up post operations + (as there is one packet coming back from the web server) */ + ptr = Curl_checkheaders(data, "Expect:"); + if(ptr) { + data->state.expect100header = + Curl_compareheader(ptr, "Expect:", "100-continue"); + } + else { + result = Curl_add_bufferf(req_buffer, + "Expect: 100-continue\r\n"); + if(result == CURLE_OK) + data->state.expect100header = TRUE; + } + } + return result; +} + +CURLcode Curl_add_custom_headers(struct connectdata *conn, + Curl_send_buffer *req_buffer) +{ + char *ptr; + struct curl_slist *headers=conn->data->set.headers; + + while(headers) { + ptr = strchr(headers->data, ':'); + if(ptr) { + /* we require a colon for this to be a true header */ + + ptr++; /* pass the colon */ + while(*ptr && ISSPACE(*ptr)) + ptr++; + + if(*ptr) { + /* only send this if the contents was non-blank */ + + if(conn->allocptr.host && + /* a Host: header was sent already, don't pass on any custom Host: + header as that will produce *two* in the same request! */ + checkprefix("Host:", headers->data)) + ; + else if(conn->data->set.httpreq == HTTPREQ_POST_FORM && + /* this header (extended by formdata.c) is sent later */ + checkprefix("Content-Type:", headers->data)) + ; + else if(conn->bits.authneg && + /* while doing auth neg, don't allow the custom length since + we will force length zero then */ + checkprefix("Content-Length", headers->data)) + ; + else if(conn->allocptr.te && + /* when asking for Transfer-Encoding, don't pass on a custom + Connection: */ + checkprefix("Connection", headers->data)) + ; + else { + CURLcode result = Curl_add_bufferf(req_buffer, "%s\r\n", + headers->data); + if(result) + return result; + } + } + } + else { + ptr = strchr(headers->data, ';'); + if(ptr) { + + ptr++; /* pass the semicolon */ + while(*ptr && ISSPACE(*ptr)) + ptr++; + + if(*ptr) { + /* this may be used for something else in the future */ + } + else { + if(*(--ptr) == ';') { + CURLcode result; + + /* send no-value custom header if terminated by semicolon */ + *ptr = ':'; + result = Curl_add_bufferf(req_buffer, "%s\r\n", + headers->data); + if(result) + return result; + } + } + } + } + headers = headers->next; + } + return CURLE_OK; +} + +CURLcode Curl_add_timecondition(struct SessionHandle *data, + Curl_send_buffer *req_buffer) +{ + const struct tm *tm; + char *buf = data->state.buffer; + CURLcode result = CURLE_OK; + struct tm keeptime; + + result = Curl_gmtime(data->set.timevalue, &keeptime); + if(result) { + failf(data, "Invalid TIMEVALUE"); + return result; + } + tm = &keeptime; + + /* The If-Modified-Since header family should have their times set in + * GMT as RFC2616 defines: "All HTTP date/time stamps MUST be + * represented in Greenwich Mean Time (GMT), without exception. For the + * purposes of HTTP, GMT is exactly equal to UTC (Coordinated Universal + * Time)." (see page 20 of RFC2616). + */ + + /* format: "Tue, 15 Nov 1994 12:45:26 GMT" */ + snprintf(buf, BUFSIZE-1, + "%s, %02d %s %4d %02d:%02d:%02d GMT", + Curl_wkday[tm->tm_wday?tm->tm_wday-1:6], + tm->tm_mday, + Curl_month[tm->tm_mon], + tm->tm_year + 1900, + tm->tm_hour, + tm->tm_min, + tm->tm_sec); + + switch(data->set.timecondition) { + case CURL_TIMECOND_IFMODSINCE: + default: + result = Curl_add_bufferf(req_buffer, + "If-Modified-Since: %s\r\n", buf); + break; + case CURL_TIMECOND_IFUNMODSINCE: + result = Curl_add_bufferf(req_buffer, + "If-Unmodified-Since: %s\r\n", buf); + break; + case CURL_TIMECOND_LASTMOD: + result = Curl_add_bufferf(req_buffer, + "Last-Modified: %s\r\n", buf); + break; + } + + return result; +} + +/* + * Curl_http() gets called from the generic Curl_do() function when a HTTP + * request is to be performed. This creates and sends a properly constructed + * HTTP request. + */ +CURLcode Curl_http(struct connectdata *conn, bool *done) +{ + struct SessionHandle *data=conn->data; + CURLcode result=CURLE_OK; + struct HTTP *http; + const char *ppath = data->state.path; + bool paste_ftp_userpwd = FALSE; + char ftp_typecode[sizeof("/;type=?")] = ""; + const char *host = conn->host.name; + const char *te = ""; /* transfer-encoding */ + const char *ptr; + const char *request; + Curl_HttpReq httpreq = data->set.httpreq; + char *addcookies = NULL; + curl_off_t included_body = 0; + const char *httpstring; + Curl_send_buffer *req_buffer; + curl_off_t postsize = 0; /* curl_off_t to handle large file sizes */ + int seekerr = CURL_SEEKFUNC_OK; + + /* Always consider the DO phase done after this function call, even if there + may be parts of the request that is not yet sent, since we can deal with + the rest of the request in the PERFORM phase. */ + *done = TRUE; + + http = data->req.protop; + + if(!data->state.this_is_a_follow) { + /* this is not a followed location, get the original host name */ + if(data->state.first_host) + /* Free to avoid leaking memory on multiple requests*/ + free(data->state.first_host); + + data->state.first_host = strdup(conn->host.name); + if(!data->state.first_host) + return CURLE_OUT_OF_MEMORY; + } + http->writebytecount = http->readbytecount = 0; + + if((conn->handler->protocol&(CURLPROTO_HTTP|CURLPROTO_FTP)) && + data->set.upload) { + httpreq = HTTPREQ_PUT; + } + + /* Now set the 'request' pointer to the proper request string */ + if(data->set.str[STRING_CUSTOMREQUEST]) + request = data->set.str[STRING_CUSTOMREQUEST]; + else { + if(data->set.opt_no_body) + request = "HEAD"; + else { + DEBUGASSERT((httpreq > HTTPREQ_NONE) && (httpreq < HTTPREQ_LAST)); + switch(httpreq) { + case HTTPREQ_POST: + case HTTPREQ_POST_FORM: + request = "POST"; + break; + case HTTPREQ_PUT: + request = "PUT"; + break; + default: /* this should never happen */ + case HTTPREQ_GET: + request = "GET"; + break; + case HTTPREQ_HEAD: + request = "HEAD"; + break; + } + } + } + + /* The User-Agent string might have been allocated in url.c already, because + it might have been used in the proxy connect, but if we have got a header + with the user-agent string specified, we erase the previously made string + here. */ + if(Curl_checkheaders(data, "User-Agent:") && conn->allocptr.uagent) { + free(conn->allocptr.uagent); + conn->allocptr.uagent=NULL; + } + + /* setup the authentication headers */ + result = Curl_http_output_auth(conn, request, ppath, FALSE); + if(result) + return result; + + if((data->state.authhost.multi || data->state.authproxy.multi) && + (httpreq != HTTPREQ_GET) && + (httpreq != HTTPREQ_HEAD)) { + /* Auth is required and we are not authenticated yet. Make a PUT or POST + with content-length zero as a "probe". */ + conn->bits.authneg = TRUE; + } + else + conn->bits.authneg = FALSE; + + Curl_safefree(conn->allocptr.ref); + if(data->change.referer && !Curl_checkheaders(data, "Referer:")) { + conn->allocptr.ref = aprintf("Referer: %s\r\n", data->change.referer); + if(!conn->allocptr.ref) + return CURLE_OUT_OF_MEMORY; + } + else + conn->allocptr.ref = NULL; + + if(data->set.str[STRING_COOKIE] && !Curl_checkheaders(data, "Cookie:")) + addcookies = data->set.str[STRING_COOKIE]; + + if(!Curl_checkheaders(data, "Accept-Encoding:") && + data->set.str[STRING_ENCODING]) { + Curl_safefree(conn->allocptr.accept_encoding); + conn->allocptr.accept_encoding = + aprintf("Accept-Encoding: %s\r\n", data->set.str[STRING_ENCODING]); + if(!conn->allocptr.accept_encoding) + return CURLE_OUT_OF_MEMORY; + } + +#ifdef HAVE_LIBZ + /* we only consider transfer-encoding magic if libz support is built-in */ + + if(!Curl_checkheaders(data, "TE:") && data->set.http_transfer_encoding) { + /* When we are to insert a TE: header in the request, we must also insert + TE in a Connection: header, so we need to merge the custom provided + Connection: header and prevent the original to get sent. Note that if + the user has inserted his/hers own TE: header we don't do this magic + but then assume that the user will handle it all! */ + char *cptr = Curl_checkheaders(data, "Connection:"); +#define TE_HEADER "TE: gzip\r\n" + + Curl_safefree(conn->allocptr.te); + + /* Create the (updated) Connection: header */ + conn->allocptr.te = cptr? aprintf("%s, TE\r\n" TE_HEADER, cptr): + strdup("Connection: TE\r\n" TE_HEADER); + + if(!conn->allocptr.te) + return CURLE_OUT_OF_MEMORY; + } +#endif + + ptr = Curl_checkheaders(data, "Transfer-Encoding:"); + if(ptr) { + /* Some kind of TE is requested, check if 'chunked' is chosen */ + data->req.upload_chunky = + Curl_compareheader(ptr, "Transfer-Encoding:", "chunked"); + } + else { + if((conn->handler->protocol&CURLPROTO_HTTP) && + data->set.upload && + (data->set.infilesize == -1)) { + if(conn->bits.authneg) + /* don't enable chunked during auth neg */ + ; + else if(use_http_1_1plus(data, conn)) { + /* HTTP, upload, unknown file size and not HTTP 1.0 */ + data->req.upload_chunky = TRUE; + } + else { + failf(data, "Chunky upload is not supported by HTTP 1.0"); + return CURLE_UPLOAD_FAILED; + } + } + else { + /* else, no chunky upload */ + data->req.upload_chunky = FALSE; + } + + if(data->req.upload_chunky) + te = "Transfer-Encoding: chunked\r\n"; + } + + Curl_safefree(conn->allocptr.host); + + ptr = Curl_checkheaders(data, "Host:"); + if(ptr && (!data->state.this_is_a_follow || + Curl_raw_equal(data->state.first_host, conn->host.name))) { +#if !defined(CURL_DISABLE_COOKIES) + /* If we have a given custom Host: header, we extract the host name in + order to possibly use it for cookie reasons later on. We only allow the + custom Host: header if this is NOT a redirect, as setting Host: in the + redirected request is being out on thin ice. Except if the host name + is the same as the first one! */ + char *cookiehost = copy_header_value(ptr); + if(!cookiehost) + return CURLE_OUT_OF_MEMORY; + if(!*cookiehost) + /* ignore empty data */ + free(cookiehost); + else { + /* If the host begins with '[', we start searching for the port after + the bracket has been closed */ + int startsearch = 0; + if(*cookiehost == '[') { + char *closingbracket; + /* since the 'cookiehost' is an allocated memory area that will be + freed later we cannot simply increment the pointer */ + memmove(cookiehost, cookiehost + 1, strlen(cookiehost) - 1); + closingbracket = strchr(cookiehost, ']'); + if(closingbracket) + *closingbracket = 0; + } + else { + char *colon = strchr(cookiehost + startsearch, ':'); + if(colon) + *colon = 0; /* The host must not include an embedded port number */ + } + Curl_safefree(conn->allocptr.cookiehost); + conn->allocptr.cookiehost = cookiehost; + } +#endif + + conn->allocptr.host = NULL; + } + else { + /* When building Host: headers, we must put the host name within + [brackets] if the host name is a plain IPv6-address. RFC2732-style. */ + + if(((conn->given->protocol&CURLPROTO_HTTPS) && + (conn->remote_port == PORT_HTTPS)) || + ((conn->given->protocol&CURLPROTO_HTTP) && + (conn->remote_port == PORT_HTTP)) ) + /* if(HTTPS on port 443) OR (HTTP on port 80) then don't include + the port number in the host string */ + conn->allocptr.host = aprintf("Host: %s%s%s\r\n", + conn->bits.ipv6_ip?"[":"", + host, + conn->bits.ipv6_ip?"]":""); + else + conn->allocptr.host = aprintf("Host: %s%s%s:%hu\r\n", + conn->bits.ipv6_ip?"[":"", + host, + conn->bits.ipv6_ip?"]":"", + conn->remote_port); + + if(!conn->allocptr.host) + /* without Host: we can't make a nice request */ + return CURLE_OUT_OF_MEMORY; + } + +#ifndef CURL_DISABLE_PROXY + if(conn->bits.httpproxy && !conn->bits.tunnel_proxy) { + /* Using a proxy but does not tunnel through it */ + + /* The path sent to the proxy is in fact the entire URL. But if the remote + host is a IDN-name, we must make sure that the request we produce only + uses the encoded host name! */ + if(conn->host.dispname != conn->host.name) { + char *url = data->change.url; + ptr = strstr(url, conn->host.dispname); + if(ptr) { + /* This is where the display name starts in the URL, now replace this + part with the encoded name. TODO: This method of replacing the host + name is rather crude as I believe there's a slight risk that the + user has entered a user name or password that contain the host name + string. */ + size_t currlen = strlen(conn->host.dispname); + size_t newlen = strlen(conn->host.name); + size_t urllen = strlen(url); + + char *newurl; + + newurl = malloc(urllen + newlen - currlen + 1); + if(newurl) { + /* copy the part before the host name */ + memcpy(newurl, url, ptr - url); + /* append the new host name instead of the old */ + memcpy(newurl + (ptr - url), conn->host.name, newlen); + /* append the piece after the host name */ + memcpy(newurl + newlen + (ptr - url), + ptr + currlen, /* copy the trailing zero byte too */ + urllen - (ptr-url) - currlen + 1); + if(data->change.url_alloc) { + Curl_safefree(data->change.url); + data->change.url_alloc = FALSE; + } + data->change.url = newurl; + data->change.url_alloc = TRUE; + } + else + return CURLE_OUT_OF_MEMORY; + } + } + ppath = data->change.url; + if(checkprefix("ftp://", ppath)) { + if(data->set.proxy_transfer_mode) { + /* when doing ftp, append ;type=<a|i> if not present */ + char *type = strstr(ppath, ";type="); + if(type && type[6] && type[7] == 0) { + switch (Curl_raw_toupper(type[6])) { + case 'A': + case 'D': + case 'I': + break; + default: + type = NULL; + } + } + if(!type) { + char *p = ftp_typecode; + /* avoid sending invalid URLs like ftp://example.com;type=i if the + * user specified ftp://example.com without the slash */ + if(!*data->state.path && ppath[strlen(ppath) - 1] != '/') { + *p++ = '/'; + } + snprintf(p, sizeof(ftp_typecode) - 1, ";type=%c", + data->set.prefer_ascii ? 'a' : 'i'); + } + } + if(conn->bits.user_passwd && !conn->bits.userpwd_in_url) + paste_ftp_userpwd = TRUE; + } + } +#endif /* CURL_DISABLE_PROXY */ + + if(HTTPREQ_POST_FORM == httpreq) { + /* we must build the whole post sequence first, so that we have a size of + the whole transfer before we start to send it */ + result = Curl_getformdata(data, &http->sendit, data->set.httppost, + Curl_checkheaders(data, "Content-Type:"), + &http->postsize); + if(result) + return result; + } + + http->p_accept = Curl_checkheaders(data, "Accept:")?NULL:"Accept: */*\r\n"; + + if(( (HTTPREQ_POST == httpreq) || + (HTTPREQ_POST_FORM == httpreq) || + (HTTPREQ_PUT == httpreq) ) && + data->state.resume_from) { + /********************************************************************** + * Resuming upload in HTTP means that we PUT or POST and that we have + * got a resume_from value set. The resume value has already created + * a Range: header that will be passed along. We need to "fast forward" + * the file the given number of bytes and decrease the assume upload + * file size before we continue this venture in the dark lands of HTTP. + *********************************************************************/ + + if(data->state.resume_from < 0 ) { + /* + * This is meant to get the size of the present remote-file by itself. + * We don't support this now. Bail out! + */ + data->state.resume_from = 0; + } + + if(data->state.resume_from && !data->state.this_is_a_follow) { + /* do we still game? */ + + /* Now, let's read off the proper amount of bytes from the + input. */ + if(conn->seek_func) { + seekerr = conn->seek_func(conn->seek_client, data->state.resume_from, + SEEK_SET); + } + + if(seekerr != CURL_SEEKFUNC_OK) { + if(seekerr != CURL_SEEKFUNC_CANTSEEK) { + failf(data, "Could not seek stream"); + return CURLE_READ_ERROR; + } + /* when seekerr == CURL_SEEKFUNC_CANTSEEK (can't seek to offset) */ + else { + curl_off_t passed=0; + do { + size_t readthisamountnow = + (data->state.resume_from - passed > CURL_OFF_T_C(BUFSIZE)) ? + BUFSIZE : curlx_sotouz(data->state.resume_from - passed); + + size_t actuallyread = + data->set.fread_func(data->state.buffer, 1, readthisamountnow, + data->set.in); + + passed += actuallyread; + if((actuallyread == 0) || (actuallyread > readthisamountnow)) { + /* this checks for greater-than only to make sure that the + CURL_READFUNC_ABORT return code still aborts */ + failf(data, "Could only read %" FORMAT_OFF_T + " bytes from the input", + passed); + return CURLE_READ_ERROR; + } + } while(passed < data->state.resume_from); + } + } + + /* now, decrease the size of the read */ + if(data->set.infilesize>0) { + data->set.infilesize -= data->state.resume_from; + + if(data->set.infilesize <= 0) { + failf(data, "File already completely uploaded"); + return CURLE_PARTIAL_FILE; + } + } + /* we've passed, proceed as normal */ + } + } + if(data->state.use_range) { + /* + * A range is selected. We use different headers whether we're downloading + * or uploading and we always let customized headers override our internal + * ones if any such are specified. + */ + if(((httpreq == HTTPREQ_GET) || (httpreq == HTTPREQ_HEAD)) && + !Curl_checkheaders(data, "Range:")) { + /* if a line like this was already allocated, free the previous one */ + if(conn->allocptr.rangeline) + free(conn->allocptr.rangeline); + conn->allocptr.rangeline = aprintf("Range: bytes=%s\r\n", + data->state.range); + } + else if((httpreq != HTTPREQ_GET) && + !Curl_checkheaders(data, "Content-Range:")) { + + /* if a line like this was already allocated, free the previous one */ + if(conn->allocptr.rangeline) + free(conn->allocptr.rangeline); + + if(data->set.set_resume_from < 0) { + /* Upload resume was asked for, but we don't know the size of the + remote part so we tell the server (and act accordingly) that we + upload the whole file (again) */ + conn->allocptr.rangeline = + aprintf("Content-Range: bytes 0-%" FORMAT_OFF_T + "/%" FORMAT_OFF_T "\r\n", + data->set.infilesize - 1, data->set.infilesize); + + } + else if(data->state.resume_from) { + /* This is because "resume" was selected */ + curl_off_t total_expected_size= + data->state.resume_from + data->set.infilesize; + conn->allocptr.rangeline = + aprintf("Content-Range: bytes %s%" FORMAT_OFF_T + "/%" FORMAT_OFF_T "\r\n", + data->state.range, total_expected_size-1, + total_expected_size); + } + else { + /* Range was selected and then we just pass the incoming range and + append total size */ + conn->allocptr.rangeline = + aprintf("Content-Range: bytes %s/%" FORMAT_OFF_T "\r\n", + data->state.range, data->set.infilesize); + } + if(!conn->allocptr.rangeline) + return CURLE_OUT_OF_MEMORY; + } + } + + /* Use 1.1 unless the user specifically asked for 1.0 or the server only + supports 1.0 */ + httpstring= use_http_1_1plus(data, conn)?"1.1":"1.0"; + + /* initialize a dynamic send-buffer */ + req_buffer = Curl_add_buffer_init(); + + if(!req_buffer) + return CURLE_OUT_OF_MEMORY; + + /* add the main request stuff */ + /* GET/HEAD/POST/PUT */ + result = Curl_add_bufferf(req_buffer, "%s ", request); + if(result) + return result; + + /* url */ + if(paste_ftp_userpwd) + result = Curl_add_bufferf(req_buffer, "ftp://%s:%s@%s", + conn->user, conn->passwd, + ppath + sizeof("ftp://") - 1); + else + result = Curl_add_buffer(req_buffer, ppath, strlen(ppath)); + if(result) + return result; + + result = + Curl_add_bufferf(req_buffer, + "%s" /* ftp typecode (;type=x) */ + " HTTP/%s\r\n" /* HTTP version */ + "%s" /* proxyuserpwd */ + "%s" /* userpwd */ + "%s" /* range */ + "%s" /* user agent */ + "%s" /* host */ + "%s" /* accept */ + "%s" /* TE: */ + "%s" /* accept-encoding */ + "%s" /* referer */ + "%s" /* Proxy-Connection */ + "%s",/* transfer-encoding */ + + ftp_typecode, + httpstring, + conn->allocptr.proxyuserpwd? + conn->allocptr.proxyuserpwd:"", + conn->allocptr.userpwd?conn->allocptr.userpwd:"", + (data->state.use_range && conn->allocptr.rangeline)? + conn->allocptr.rangeline:"", + (data->set.str[STRING_USERAGENT] && + *data->set.str[STRING_USERAGENT] && + conn->allocptr.uagent)? + conn->allocptr.uagent:"", + (conn->allocptr.host?conn->allocptr.host:""), + http->p_accept?http->p_accept:"", + conn->allocptr.te?conn->allocptr.te:"", + (data->set.str[STRING_ENCODING] && + *data->set.str[STRING_ENCODING] && + conn->allocptr.accept_encoding)? + conn->allocptr.accept_encoding:"", + (data->change.referer && conn->allocptr.ref)? + conn->allocptr.ref:"" /* Referer: <data> */, + (conn->bits.httpproxy && + !conn->bits.tunnel_proxy && + !Curl_checkheaders(data, "Proxy-Connection:"))? + "Proxy-Connection: Keep-Alive\r\n":"", + te + ); + + /* + * Free userpwd now --- cannot reuse this for Negotiate and possibly NTLM + * with basic and digest, it will be freed anyway by the next request + */ + + Curl_safefree (conn->allocptr.userpwd); + conn->allocptr.userpwd = NULL; + + if(result) + return result; + + if(!(conn->handler->flags&PROTOPT_SSL) && + (data->set.httpversion == CURL_HTTP_VERSION_2_0)) { + /* append HTTP2 updrade magic stuff to the HTTP request if it isn't done + over SSL */ + result = Curl_http2_request(req_buffer, conn); + if(result) + return result; + } + +#if !defined(CURL_DISABLE_COOKIES) + if(data->cookies || addcookies) { + struct Cookie *co=NULL; /* no cookies from start */ + int count=0; + + if(data->cookies) { + Curl_share_lock(data, CURL_LOCK_DATA_COOKIE, CURL_LOCK_ACCESS_SINGLE); + co = Curl_cookie_getlist(data->cookies, + conn->allocptr.cookiehost? + conn->allocptr.cookiehost:host, + data->state.path, + (conn->handler->protocol&CURLPROTO_HTTPS)? + TRUE:FALSE); + Curl_share_unlock(data, CURL_LOCK_DATA_COOKIE); + } + if(co) { + struct Cookie *store=co; + /* now loop through all cookies that matched */ + while(co) { + if(co->value) { + if(0 == count) { + result = Curl_add_bufferf(req_buffer, "Cookie: "); + if(result) + break; + } + result = Curl_add_bufferf(req_buffer, + "%s%s=%s", count?"; ":"", + co->name, co->value); + if(result) + break; + count++; + } + co = co->next; /* next cookie please */ + } + Curl_cookie_freelist(store, FALSE); /* free the cookie list */ + } + if(addcookies && (CURLE_OK == result)) { + if(!count) + result = Curl_add_bufferf(req_buffer, "Cookie: "); + if(CURLE_OK == result) { + result = Curl_add_bufferf(req_buffer, "%s%s", + count?"; ":"", + addcookies); + count++; + } + } + if(count && (CURLE_OK == result)) + result = Curl_add_buffer(req_buffer, "\r\n", 2); + + if(result) + return result; + } +#endif + + if(data->set.timecondition) { + result = Curl_add_timecondition(data, req_buffer); + if(result) + return result; + } + + result = Curl_add_custom_headers(conn, req_buffer); + if(result) + return result; + + http->postdata = NULL; /* nothing to post at this point */ + Curl_pgrsSetUploadSize(data, 0); /* upload size is 0 atm */ + + /* If 'authdone' is FALSE, we must not set the write socket index to the + Curl_transfer() call below, as we're not ready to actually upload any + data yet. */ + + switch(httpreq) { + + case HTTPREQ_POST_FORM: + if(!http->sendit || conn->bits.authneg) { + /* nothing to post! */ + result = Curl_add_bufferf(req_buffer, "Content-Length: 0\r\n\r\n"); + if(result) + return result; + + result = Curl_add_buffer_send(req_buffer, conn, + &data->info.request_size, 0, FIRSTSOCKET); + if(result) + failf(data, "Failed sending POST request"); + else + /* setup variables for the upcoming transfer */ + Curl_setup_transfer(conn, FIRSTSOCKET, -1, TRUE, &http->readbytecount, + -1, NULL); + break; + } + + if(Curl_FormInit(&http->form, http->sendit)) { + failf(data, "Internal HTTP POST error!"); + return CURLE_HTTP_POST_ERROR; + } + + /* Get the currently set callback function pointer and store that in the + form struct since we might want the actual user-provided callback later + on. The conn->fread_func pointer itself will be changed for the + multipart case to the function that returns a multipart formatted + stream. */ + http->form.fread_func = conn->fread_func; + + /* Set the read function to read from the generated form data */ + conn->fread_func = (curl_read_callback)Curl_FormReader; + conn->fread_in = &http->form; + + http->sending = HTTPSEND_BODY; + + if(!data->req.upload_chunky && + !Curl_checkheaders(data, "Content-Length:")) { + /* only add Content-Length if not uploading chunked */ + result = Curl_add_bufferf(req_buffer, + "Content-Length: %" FORMAT_OFF_T "\r\n", + http->postsize); + if(result) + return result; + } + + result = expect100(data, conn, req_buffer); + if(result) + return result; + + { + + /* Get Content-Type: line from Curl_formpostheader. + */ + char *contentType; + size_t linelength=0; + contentType = Curl_formpostheader((void *)&http->form, + &linelength); + if(!contentType) { + failf(data, "Could not get Content-Type header line!"); + return CURLE_HTTP_POST_ERROR; + } + + result = Curl_add_buffer(req_buffer, contentType, linelength); + if(result) + return result; + } + + /* make the request end in a true CRLF */ + result = Curl_add_buffer(req_buffer, "\r\n", 2); + if(result) + return result; + + /* set upload size to the progress meter */ + Curl_pgrsSetUploadSize(data, http->postsize); + + /* fire away the whole request to the server */ + result = Curl_add_buffer_send(req_buffer, conn, + &data->info.request_size, 0, FIRSTSOCKET); + if(result) + failf(data, "Failed sending POST request"); + else + /* setup variables for the upcoming transfer */ + Curl_setup_transfer(conn, FIRSTSOCKET, -1, TRUE, + &http->readbytecount, FIRSTSOCKET, + &http->writebytecount); + + if(result) { + Curl_formclean(&http->sendit); /* free that whole lot */ + return result; + } + + /* convert the form data */ + result = Curl_convert_form(data, http->sendit); + if(result) { + Curl_formclean(&http->sendit); /* free that whole lot */ + return result; + } + + break; + + case HTTPREQ_PUT: /* Let's PUT the data to the server! */ + + if(conn->bits.authneg) + postsize = 0; + else + postsize = data->set.infilesize; + + if((postsize != -1) && !data->req.upload_chunky && + !Curl_checkheaders(data, "Content-Length:")) { + /* only add Content-Length if not uploading chunked */ + result = Curl_add_bufferf(req_buffer, + "Content-Length: %" FORMAT_OFF_T "\r\n", + postsize ); + if(result) + return result; + } + + result = expect100(data, conn, req_buffer); + if(result) + return result; + + result = Curl_add_buffer(req_buffer, "\r\n", 2); /* end of headers */ + if(result) + return result; + + /* set the upload size to the progress meter */ + Curl_pgrsSetUploadSize(data, postsize); + + /* this sends the buffer and frees all the buffer resources */ + result = Curl_add_buffer_send(req_buffer, conn, + &data->info.request_size, 0, FIRSTSOCKET); + if(result) + failf(data, "Failed sending PUT request"); + else + /* prepare for transfer */ + Curl_setup_transfer(conn, FIRSTSOCKET, -1, TRUE, + &http->readbytecount, postsize?FIRSTSOCKET:-1, + postsize?&http->writebytecount:NULL); + if(result) + return result; + break; + + case HTTPREQ_POST: + /* this is the simple POST, using x-www-form-urlencoded style */ + + if(conn->bits.authneg) + postsize = 0; + else { + /* figure out the size of the postfields */ + postsize = (data->set.postfieldsize != -1)? + data->set.postfieldsize: + (data->set.postfields? (curl_off_t)strlen(data->set.postfields):-1); + } + if(!data->req.upload_chunky) { + /* We only set Content-Length and allow a custom Content-Length if + we don't upload data chunked, as RFC2616 forbids us to set both + kinds of headers (Transfer-Encoding: chunked and Content-Length) */ + + if(conn->bits.authneg || !Curl_checkheaders(data, "Content-Length:")) { + /* we allow replacing this header if not during auth negotiation, + although it isn't very wise to actually set your own */ + result = Curl_add_bufferf(req_buffer, + "Content-Length: %" FORMAT_OFF_T"\r\n", + postsize); + if(result) + return result; + } + } + + if(!Curl_checkheaders(data, "Content-Type:")) { + result = Curl_add_bufferf(req_buffer, + "Content-Type: application/" + "x-www-form-urlencoded\r\n"); + if(result) + return result; + } + + /* For really small posts we don't use Expect: headers at all, and for + the somewhat bigger ones we allow the app to disable it. Just make + sure that the expect100header is always set to the preferred value + here. */ + ptr = Curl_checkheaders(data, "Expect:"); + if(ptr) { + data->state.expect100header = + Curl_compareheader(ptr, "Expect:", "100-continue"); + } + else if(postsize > TINY_INITIAL_POST_SIZE || postsize < 0) { + result = expect100(data, conn, req_buffer); + if(result) + return result; + } + else + data->state.expect100header = FALSE; + + if(data->set.postfields) { + + if(!data->state.expect100header && + (postsize < MAX_INITIAL_POST_SIZE)) { + /* if we don't use expect: 100 AND + postsize is less than MAX_INITIAL_POST_SIZE + + then append the post data to the HTTP request header. This limit + is no magic limit but only set to prevent really huge POSTs to + get the data duplicated with malloc() and family. */ + + result = Curl_add_buffer(req_buffer, "\r\n", 2); /* end of headers! */ + if(result) + return result; + + if(!data->req.upload_chunky) { + /* We're not sending it 'chunked', append it to the request + already now to reduce the number if send() calls */ + result = Curl_add_buffer(req_buffer, data->set.postfields, + (size_t)postsize); + included_body = postsize; + } + else { + if(postsize) { + /* Append the POST data chunky-style */ + result = Curl_add_bufferf(req_buffer, "%x\r\n", (int)postsize); + if(CURLE_OK == result) { + result = Curl_add_buffer(req_buffer, data->set.postfields, + (size_t)postsize); + if(CURLE_OK == result) + result = Curl_add_buffer(req_buffer, "\r\n", 2); + included_body = postsize + 2; + } + } + if(CURLE_OK == result) + result = Curl_add_buffer(req_buffer, + "\x30\x0d\x0a\x0d\x0a", 5); + /* 0 CR LF CR LF */ + included_body += 5; + } + if(result) + return result; + /* Make sure the progress information is accurate */ + Curl_pgrsSetUploadSize(data, postsize); + } + else { + /* A huge POST coming up, do data separate from the request */ + http->postsize = postsize; + http->postdata = data->set.postfields; + + http->sending = HTTPSEND_BODY; + + conn->fread_func = (curl_read_callback)readmoredata; + conn->fread_in = (void *)conn; + + /* set the upload size to the progress meter */ + Curl_pgrsSetUploadSize(data, http->postsize); + + result = Curl_add_buffer(req_buffer, "\r\n", 2); /* end of headers! */ + if(result) + return result; + } + } + else { + result = Curl_add_buffer(req_buffer, "\r\n", 2); /* end of headers! */ + if(result) + return result; + + if(data->req.upload_chunky && conn->bits.authneg) { + /* Chunky upload is selected and we're negotiating auth still, send + end-of-data only */ + result = Curl_add_buffer(req_buffer, + "\x30\x0d\x0a\x0d\x0a", 5); + /* 0 CR LF CR LF */ + if(result) + return result; + } + + else if(data->set.postfieldsize) { + /* set the upload size to the progress meter */ + Curl_pgrsSetUploadSize(data, postsize?postsize:-1); + + /* set the pointer to mark that we will send the post body using the + read callback, but only if we're not in authenticate + negotiation */ + if(!conn->bits.authneg) { + http->postdata = (char *)&http->postdata; + http->postsize = postsize; + } + } + } + /* issue the request */ + result = Curl_add_buffer_send(req_buffer, conn, &data->info.request_size, + (size_t)included_body, FIRSTSOCKET); + + if(result) + failf(data, "Failed sending HTTP POST request"); + else + Curl_setup_transfer(conn, FIRSTSOCKET, -1, TRUE, + &http->readbytecount, http->postdata?FIRSTSOCKET:-1, + http->postdata?&http->writebytecount:NULL); + break; + + default: + result = Curl_add_buffer(req_buffer, "\r\n", 2); + if(result) + return result; + + /* issue the request */ + result = Curl_add_buffer_send(req_buffer, conn, + &data->info.request_size, 0, FIRSTSOCKET); + + if(result) + failf(data, "Failed sending HTTP request"); + else + /* HTTP GET/HEAD download: */ + Curl_setup_transfer(conn, FIRSTSOCKET, -1, TRUE, &http->readbytecount, + http->postdata?FIRSTSOCKET:-1, + http->postdata?&http->writebytecount:NULL); + } + if(result) + return result; + + if(http->writebytecount) { + /* if a request-body has been sent off, we make sure this progress is noted + properly */ + Curl_pgrsSetUploadCounter(data, http->writebytecount); + if(Curl_pgrsUpdate(conn)) + result = CURLE_ABORTED_BY_CALLBACK; + + if(http->writebytecount >= postsize) { + /* already sent the entire request body, mark the "upload" as + complete */ + infof(data, "upload completely sent off: %" FORMAT_OFF_T " out of " + "%" FORMAT_OFF_T " bytes\n", + http->writebytecount, postsize); + data->req.upload_done = TRUE; + data->req.keepon &= ~KEEP_SEND; /* we're done writing */ + data->req.exp100 = EXP100_SEND_DATA; /* already sent */ + } + } + + return result; +} + +/* + * checkhttpprefix() + * + * Returns TRUE if member of the list matches prefix of string + */ +static bool +checkhttpprefix(struct SessionHandle *data, + const char *s) +{ + struct curl_slist *head = data->set.http200aliases; + bool rc = FALSE; +#ifdef CURL_DOES_CONVERSIONS + /* convert from the network encoding using a scratch area */ + char *scratch = strdup(s); + if(NULL == scratch) { + failf (data, "Failed to allocate memory for conversion!"); + return FALSE; /* can't return CURLE_OUT_OF_MEMORY so return FALSE */ + } + if(CURLE_OK != Curl_convert_from_network(data, scratch, strlen(s)+1)) { + /* Curl_convert_from_network calls failf if unsuccessful */ + free(scratch); + return FALSE; /* can't return CURLE_foobar so return FALSE */ + } + s = scratch; +#endif /* CURL_DOES_CONVERSIONS */ + + while(head) { + if(checkprefix(head->data, s)) { + rc = TRUE; + break; + } + head = head->next; + } + + if(!rc && (checkprefix("HTTP/", s))) + rc = TRUE; + +#ifdef CURL_DOES_CONVERSIONS + free(scratch); +#endif /* CURL_DOES_CONVERSIONS */ + return rc; +} + +#ifndef CURL_DISABLE_RTSP +static bool +checkrtspprefix(struct SessionHandle *data, + const char *s) +{ + +#ifdef CURL_DOES_CONVERSIONS + /* convert from the network encoding using a scratch area */ + char *scratch = strdup(s); + if(NULL == scratch) { + failf (data, "Failed to allocate memory for conversion!"); + return FALSE; /* can't return CURLE_OUT_OF_MEMORY so return FALSE */ + } + if(CURLE_OK != Curl_convert_from_network(data, scratch, strlen(s)+1)) { + /* Curl_convert_from_network calls failf if unsuccessful */ + free(scratch); + return FALSE; /* can't return CURLE_foobar so return FALSE */ + } + s = scratch; +#else + (void)data; /* unused */ +#endif /* CURL_DOES_CONVERSIONS */ + if(checkprefix("RTSP/", s)) + return TRUE; + else + return FALSE; +} +#endif /* CURL_DISABLE_RTSP */ + +static bool +checkprotoprefix(struct SessionHandle *data, struct connectdata *conn, + const char *s) +{ +#ifndef CURL_DISABLE_RTSP + if(conn->handler->protocol & CURLPROTO_RTSP) + return checkrtspprefix(data, s); +#else + (void)conn; +#endif /* CURL_DISABLE_RTSP */ + + return checkhttpprefix(data, s); +} + +/* + * header_append() copies a chunk of data to the end of the already received + * header. We make sure that the full string fit in the allocated header + * buffer, or else we enlarge it. + */ +static CURLcode header_append(struct SessionHandle *data, + struct SingleRequest *k, + size_t length) +{ + if(k->hbuflen + length >= data->state.headersize) { + /* We enlarge the header buffer as it is too small */ + char *newbuff; + size_t hbufp_index; + size_t newsize; + + if(k->hbuflen + length > CURL_MAX_HTTP_HEADER) { + /* The reason to have a max limit for this is to avoid the risk of a bad + server feeding libcurl with a never-ending header that will cause + reallocs infinitely */ + failf (data, "Avoided giant realloc for header (max is %d)!", + CURL_MAX_HTTP_HEADER); + return CURLE_OUT_OF_MEMORY; + } + + newsize=CURLMAX((k->hbuflen+ length)*3/2, data->state.headersize*2); + hbufp_index = k->hbufp - data->state.headerbuff; + newbuff = realloc(data->state.headerbuff, newsize); + if(!newbuff) { + failf (data, "Failed to alloc memory for big header!"); + return CURLE_OUT_OF_MEMORY; + } + data->state.headersize=newsize; + data->state.headerbuff = newbuff; + k->hbufp = data->state.headerbuff + hbufp_index; + } + memcpy(k->hbufp, k->str_start, length); + k->hbufp += length; + k->hbuflen += length; + *k->hbufp = 0; + + return CURLE_OK; +} + +static void print_http_error(struct SessionHandle *data) +{ + struct SingleRequest *k = &data->req; + char *beg = k->p; + + /* make sure that data->req.p points to the HTTP status line */ + if(!strncmp(beg, "HTTP", 4)) { + + /* skip to HTTP status code */ + beg = strchr(beg, ' '); + if(beg && *++beg) { + + /* find trailing CR */ + char end_char = '\r'; + char *end = strchr(beg, end_char); + if(!end) { + /* try to find LF (workaround for non-compliant HTTP servers) */ + end_char = '\n'; + end = strchr(beg, end_char); + } + + if(end) { + /* temporarily replace CR or LF by NUL and print the error message */ + *end = '\0'; + failf(data, "The requested URL returned error: %s", beg); + + /* restore the previously replaced CR or LF */ + *end = end_char; + return; + } + } + } + + /* fall-back to printing the HTTP status code only */ + failf(data, "The requested URL returned error: %d", k->httpcode); +} + +/* + * Read any HTTP header lines from the server and pass them to the client app. + */ +CURLcode Curl_http_readwrite_headers(struct SessionHandle *data, + struct connectdata *conn, + ssize_t *nread, + bool *stop_reading) +{ + CURLcode result; + struct SingleRequest *k = &data->req; + + /* header line within buffer loop */ + do { + size_t rest_length; + size_t full_length; + int writetype; + + /* str_start is start of line within buf */ + k->str_start = k->str; + + /* data is in network encoding so use 0x0a instead of '\n' */ + k->end_ptr = memchr(k->str_start, 0x0a, *nread); + + if(!k->end_ptr) { + /* Not a complete header line within buffer, append the data to + the end of the headerbuff. */ + result = header_append(data, k, *nread); + if(result) + return result; + + if(!k->headerline && (k->hbuflen>5)) { + /* make a first check that this looks like a protocol header */ + if(!checkprotoprefix(data, conn, data->state.headerbuff)) { + /* this is not the beginning of a protocol first header line */ + k->header = FALSE; + k->badheader = HEADER_ALLBAD; + break; + } + } + + break; /* read more and try again */ + } + + /* decrease the size of the remaining (supposed) header line */ + rest_length = (k->end_ptr - k->str)+1; + *nread -= (ssize_t)rest_length; + + k->str = k->end_ptr + 1; /* move past new line */ + + full_length = k->str - k->str_start; + + result = header_append(data, k, full_length); + if(result) + return result; + + k->end_ptr = k->hbufp; + k->p = data->state.headerbuff; + + /**** + * We now have a FULL header line that p points to + *****/ + + if(!k->headerline) { + /* the first read header */ + if((k->hbuflen>5) && + !checkprotoprefix(data, conn, data->state.headerbuff)) { + /* this is not the beginning of a protocol first header line */ + k->header = FALSE; + if(*nread) + /* since there's more, this is a partial bad header */ + k->badheader = HEADER_PARTHEADER; + else { + /* this was all we read so it's all a bad header */ + k->badheader = HEADER_ALLBAD; + *nread = (ssize_t)rest_length; + } + break; + } + } + + /* headers are in network encoding so + use 0x0a and 0x0d instead of '\n' and '\r' */ + if((0x0a == *k->p) || (0x0d == *k->p)) { + size_t headerlen; + /* Zero-length header line means end of headers! */ + +#ifdef CURL_DOES_CONVERSIONS + if(0x0d == *k->p) { + *k->p = '\r'; /* replace with CR in host encoding */ + k->p++; /* pass the CR byte */ + } + if(0x0a == *k->p) { + *k->p = '\n'; /* replace with LF in host encoding */ + k->p++; /* pass the LF byte */ + } +#else + if('\r' == *k->p) + k->p++; /* pass the \r byte */ + if('\n' == *k->p) + k->p++; /* pass the \n byte */ +#endif /* CURL_DOES_CONVERSIONS */ + + if(100 <= k->httpcode && 199 >= k->httpcode) { + /* + * We have made a HTTP PUT or POST and this is 1.1-lingo + * that tells us that the server is OK with this and ready + * to receive the data. + * However, we'll get more headers now so we must get + * back into the header-parsing state! + */ + k->header = TRUE; + k->headerline = 0; /* restart the header line counter */ + + /* if we did wait for this do enable write now! */ + if(k->exp100) { + k->exp100 = EXP100_SEND_DATA; + k->keepon |= KEEP_SEND; + } + } + else { + k->header = FALSE; /* no more header to parse! */ + + if((k->size == -1) && !k->chunk && !conn->bits.close && + (conn->httpversion >= 11) && + !(conn->handler->protocol & CURLPROTO_RTSP) && + data->set.httpreq != HTTPREQ_HEAD) { + /* On HTTP 1.1, when connection is not to get closed, but no + Content-Length nor Content-Encoding chunked have been + received, according to RFC2616 section 4.4 point 5, we + assume that the server will close the connection to + signal the end of the document. */ + infof(data, "no chunk, no close, no size. Assume close to " + "signal end\n"); + conn->bits.close = TRUE; + } + } + + /* + * When all the headers have been parsed, see if we should give + * up and return an error. + */ + if(http_should_fail(conn)) { + failf (data, "The requested URL returned error: %d", + k->httpcode); + return CURLE_HTTP_RETURNED_ERROR; + } + + /* now, only output this if the header AND body are requested: + */ + writetype = CLIENTWRITE_HEADER; + if(data->set.include_header) + writetype |= CLIENTWRITE_BODY; + + headerlen = k->p - data->state.headerbuff; + + result = Curl_client_write(conn, writetype, + data->state.headerbuff, + headerlen); + if(result) + return result; + + data->info.header_size += (long)headerlen; + data->req.headerbytecount += (long)headerlen; + + data->req.deductheadercount = + (100 <= k->httpcode && 199 >= k->httpcode)?data->req.headerbytecount:0; + + if(!*stop_reading) { + /* Curl_http_auth_act() checks what authentication methods + * that are available and decides which one (if any) to + * use. It will set 'newurl' if an auth method was picked. */ + result = Curl_http_auth_act(conn); + + if(result) + return result; + + if(k->httpcode >= 300) { + if((!conn->bits.authneg) && !conn->bits.close && + !conn->bits.rewindaftersend) { + /* + * General treatment of errors when about to send data. Including : + * "417 Expectation Failed", while waiting for 100-continue. + * + * The check for close above is done simply because of something + * else has already deemed the connection to get closed then + * something else should've considered the big picture and we + * avoid this check. + * + * rewindaftersend indicates that something has told libcurl to + * continue sending even if it gets discarded + */ + + switch(data->set.httpreq) { + case HTTPREQ_PUT: + case HTTPREQ_POST: + case HTTPREQ_POST_FORM: + /* We got an error response. If this happened before the whole + * request body has been sent we stop sending and mark the + * connection for closure after we've read the entire response. + */ + if(!k->upload_done) { + infof(data, "HTTP error before end of send, stop sending\n"); + conn->bits.close = TRUE; /* close after this */ + k->upload_done = TRUE; + k->keepon &= ~KEEP_SEND; /* don't send */ + if(data->state.expect100header) + k->exp100 = EXP100_FAILED; + } + break; + + default: /* default label present to avoid compiler warnings */ + break; + } + } + } + + if(conn->bits.rewindaftersend) { + /* We rewind after a complete send, so thus we continue + sending now */ + infof(data, "Keep sending data to get tossed away!\n"); + k->keepon |= KEEP_SEND; + } + } + + if(!k->header) { + /* + * really end-of-headers. + * + * If we requested a "no body", this is a good time to get + * out and return home. + */ + if(data->set.opt_no_body) + *stop_reading = TRUE; + else { + /* If we know the expected size of this document, we set the + maximum download size to the size of the expected + document or else, we won't know when to stop reading! + + Note that we set the download maximum even if we read a + "Connection: close" header, to make sure that + "Content-Length: 0" still prevents us from attempting to + read the (missing) response-body. + */ + /* According to RFC2616 section 4.4, we MUST ignore + Content-Length: headers if we are now receiving data + using chunked Transfer-Encoding. + */ + if(k->chunk) + k->maxdownload = k->size = -1; + } + if(-1 != k->size) { + /* We do this operation even if no_body is true, since this + data might be retrieved later with curl_easy_getinfo() + and its CURLINFO_CONTENT_LENGTH_DOWNLOAD option. */ + + Curl_pgrsSetDownloadSize(data, k->size); + k->maxdownload = k->size; + } + + /* If max download size is *zero* (nothing) we already + have nothing and can safely return ok now! */ + if(0 == k->maxdownload) + *stop_reading = TRUE; + + if(*stop_reading) { + /* we make sure that this socket isn't read more now */ + k->keepon &= ~KEEP_RECV; + } + + if(data->set.verbose) + Curl_debug(data, CURLINFO_HEADER_IN, + k->str_start, headerlen, conn); + break; /* exit header line loop */ + } + + /* We continue reading headers, so reset the line-based + header parsing variables hbufp && hbuflen */ + k->hbufp = data->state.headerbuff; + k->hbuflen = 0; + continue; + } + + /* + * Checks for special headers coming up. + */ + + if(!k->headerline++) { + /* This is the first header, it MUST be the error code line + or else we consider this to be the body right away! */ + int httpversion_major; + int rtspversion_major; + int nc = 0; +#ifdef CURL_DOES_CONVERSIONS +#define HEADER1 scratch +#define SCRATCHSIZE 21 + CURLcode res; + char scratch[SCRATCHSIZE+1]; /* "HTTP/major.minor 123" */ + /* We can't really convert this yet because we + don't know if it's the 1st header line or the body. + So we do a partial conversion into a scratch area, + leaving the data at k->p as-is. + */ + strncpy(&scratch[0], k->p, SCRATCHSIZE); + scratch[SCRATCHSIZE] = 0; /* null terminate */ + res = Curl_convert_from_network(data, + &scratch[0], + SCRATCHSIZE); + if(res) + /* Curl_convert_from_network calls failf if unsuccessful */ + return res; +#else +#define HEADER1 k->p /* no conversion needed, just use k->p */ +#endif /* CURL_DOES_CONVERSIONS */ + + if(conn->handler->protocol & CURLPROTO_HTTP) { + nc = sscanf(HEADER1, + " HTTP/%d.%d %3d", + &httpversion_major, + &conn->httpversion, + &k->httpcode); + if(nc==3) { + conn->httpversion += 10 * httpversion_major; + } + else { + /* this is the real world, not a Nirvana + NCSA 1.5.x returns this crap when asked for HTTP/1.1 + */ + nc=sscanf(HEADER1, " HTTP %3d", &k->httpcode); + conn->httpversion = 10; + + /* If user has set option HTTP200ALIASES, + compare header line against list of aliases + */ + if(!nc) { + if(checkhttpprefix(data, k->p)) { + nc = 1; + k->httpcode = 200; + conn->httpversion = 10; + } + } + } + } + else if(conn->handler->protocol & CURLPROTO_RTSP) { + nc = sscanf(HEADER1, + " RTSP/%d.%d %3d", + &rtspversion_major, + &conn->rtspversion, + &k->httpcode); + if(nc==3) { + conn->rtspversion += 10 * rtspversion_major; + conn->httpversion = 11; /* For us, RTSP acts like HTTP 1.1 */ + } + else { + /* TODO: do we care about the other cases here? */ + nc = 0; + } + } + + if(nc) { + data->info.httpcode = k->httpcode; + + data->info.httpversion = conn->httpversion; + if(!data->state.httpversion || + data->state.httpversion > conn->httpversion) + /* store the lowest server version we encounter */ + data->state.httpversion = conn->httpversion; + + /* + * This code executes as part of processing the header. As a + * result, it's not totally clear how to interpret the + * response code yet as that depends on what other headers may + * be present. 401 and 407 may be errors, but may be OK + * depending on how authentication is working. Other codes + * are definitely errors, so give up here. + */ + if(data->set.http_fail_on_error && (k->httpcode >= 400) && + ((k->httpcode != 401) || !conn->bits.user_passwd) && + ((k->httpcode != 407) || !conn->bits.proxy_user_passwd) ) { + + if(data->state.resume_from && + (data->set.httpreq==HTTPREQ_GET) && + (k->httpcode == 416)) { + /* "Requested Range Not Satisfiable", just proceed and + pretend this is no error */ + } + else { + /* serious error, go home! */ + print_http_error(data); + return CURLE_HTTP_RETURNED_ERROR; + } + } + + if(conn->httpversion == 10) { + /* Default action for HTTP/1.0 must be to close, unless + we get one of those fancy headers that tell us the + server keeps it open for us! */ + infof(data, "HTTP 1.0, assume close after body\n"); + conn->bits.close = TRUE; + } + else if(conn->httpversion >= 11 && + !conn->bits.close) { + struct connectbundle *cb_ptr; + + /* If HTTP version is >= 1.1 and connection is persistent + server supports pipelining. */ + DEBUGF(infof(data, + "HTTP 1.1 or later with persistent connection, " + "pipelining supported\n")); + /* Activate pipelining if needed */ + cb_ptr = conn->bundle; + if(cb_ptr) { + if(!Curl_pipeline_site_blacklisted(data, conn)) + cb_ptr->server_supports_pipelining = TRUE; + } + } + + switch(k->httpcode) { + case 204: + /* (quote from RFC2616, section 10.2.5): The server has + * fulfilled the request but does not need to return an + * entity-body ... The 204 response MUST NOT include a + * message-body, and thus is always terminated by the first + * empty line after the header fields. */ + /* FALLTHROUGH */ + case 304: + /* (quote from RFC2616, section 10.3.5): The 304 response + * MUST NOT contain a message-body, and thus is always + * terminated by the first empty line after the header + * fields. */ + if(data->set.timecondition) + data->info.timecond = TRUE; + k->size=0; + k->maxdownload=0; + k->ignorecl = TRUE; /* ignore Content-Length headers */ + break; + default: + /* nothing */ + break; + } + } + else { + k->header = FALSE; /* this is not a header line */ + break; + } + } + + result = Curl_convert_from_network(data, k->p, strlen(k->p)); + /* Curl_convert_from_network calls failf if unsuccessful */ + if(result) + return result; + + /* Check for Content-Length: header lines to get size */ + if(!k->ignorecl && !data->set.ignorecl && + checkprefix("Content-Length:", k->p)) { + curl_off_t contentlength = curlx_strtoofft(k->p+15, NULL, 10); + if(data->set.max_filesize && + contentlength > data->set.max_filesize) { + failf(data, "Maximum file size exceeded"); + return CURLE_FILESIZE_EXCEEDED; + } + if(contentlength >= 0) { + k->size = contentlength; + k->maxdownload = k->size; + /* we set the progress download size already at this point + just to make it easier for apps/callbacks to extract this + info as soon as possible */ + Curl_pgrsSetDownloadSize(data, k->size); + } + else { + /* Negative Content-Length is really odd, and we know it + happens for example when older Apache servers send large + files */ + conn->bits.close = TRUE; + infof(data, "Negative content-length: %" FORMAT_OFF_T + ", closing after transfer\n", contentlength); + } + } + /* check for Content-Type: header lines to get the MIME-type */ + else if(checkprefix("Content-Type:", k->p)) { + char *contenttype = copy_header_value(k->p); + if(!contenttype) + return CURLE_OUT_OF_MEMORY; + if(!*contenttype) + /* ignore empty data */ + free(contenttype); + else { + Curl_safefree(data->info.contenttype); + data->info.contenttype = contenttype; + } + } + else if(checkprefix("Server:", k->p)) { + char *server_name = copy_header_value(k->p); + + /* Turn off pipelining if the server version is blacklisted */ + if(conn->bundle && conn->bundle->server_supports_pipelining) { + if(Curl_pipeline_server_blacklisted(data, server_name)) + conn->bundle->server_supports_pipelining = FALSE; + } + Curl_safefree(server_name); + } + else if((conn->httpversion == 10) && + conn->bits.httpproxy && + Curl_compareheader(k->p, + "Proxy-Connection:", "keep-alive")) { + /* + * When a HTTP/1.0 reply comes when using a proxy, the + * 'Proxy-Connection: keep-alive' line tells us the + * connection will be kept alive for our pleasure. + * Default action for 1.0 is to close. + */ + conn->bits.close = FALSE; /* don't close when done */ + infof(data, "HTTP/1.0 proxy connection set to keep alive!\n"); + } + else if((conn->httpversion == 11) && + conn->bits.httpproxy && + Curl_compareheader(k->p, + "Proxy-Connection:", "close")) { + /* + * We get a HTTP/1.1 response from a proxy and it says it'll + * close down after this transfer. + */ + conn->bits.close = TRUE; /* close when done */ + infof(data, "HTTP/1.1 proxy connection set close!\n"); + } + else if((conn->httpversion == 10) && + Curl_compareheader(k->p, "Connection:", "keep-alive")) { + /* + * A HTTP/1.0 reply with the 'Connection: keep-alive' line + * tells us the connection will be kept alive for our + * pleasure. Default action for 1.0 is to close. + * + * [RFC2068, section 19.7.1] */ + conn->bits.close = FALSE; /* don't close when done */ + infof(data, "HTTP/1.0 connection set to keep alive!\n"); + } + else if(Curl_compareheader(k->p, "Connection:", "close")) { + /* + * [RFC 2616, section 8.1.2.1] + * "Connection: close" is HTTP/1.1 language and means that + * the connection will close when this request has been + * served. + */ + conn->bits.close = TRUE; /* close when done */ + } + else if(checkprefix("Transfer-Encoding:", k->p)) { + /* One or more encodings. We check for chunked and/or a compression + algorithm. */ + /* + * [RFC 2616, section 3.6.1] A 'chunked' transfer encoding + * means that the server will send a series of "chunks". Each + * chunk starts with line with info (including size of the + * coming block) (terminated with CRLF), then a block of data + * with the previously mentioned size. There can be any amount + * of chunks, and a chunk-data set to zero signals the + * end-of-chunks. */ + + char *start; + + /* Find the first non-space letter */ + start = k->p + 18; + + for(;;) { + /* skip whitespaces and commas */ + while(*start && (ISSPACE(*start) || (*start == ','))) + start++; + + if(checkprefix("chunked", start)) { + k->chunk = TRUE; /* chunks coming our way */ + + /* init our chunky engine */ + Curl_httpchunk_init(conn); + + start += 7; + } + + if(k->auto_decoding) + /* TODO: we only support the first mentioned compression for now */ + break; + + if(checkprefix("identity", start)) { + k->auto_decoding = IDENTITY; + start += 8; + } + else if(checkprefix("deflate", start)) { + k->auto_decoding = DEFLATE; + start += 7; + } + else if(checkprefix("gzip", start)) { + k->auto_decoding = GZIP; + start += 4; + } + else if(checkprefix("x-gzip", start)) { + k->auto_decoding = GZIP; + start += 6; + } + else if(checkprefix("compress", start)) { + k->auto_decoding = COMPRESS; + start += 8; + } + else if(checkprefix("x-compress", start)) { + k->auto_decoding = COMPRESS; + start += 10; + } + else + /* unknown! */ + break; + + } + + } + else if(checkprefix("Content-Encoding:", k->p) && + data->set.str[STRING_ENCODING]) { + /* + * Process Content-Encoding. Look for the values: identity, + * gzip, deflate, compress, x-gzip and x-compress. x-gzip and + * x-compress are the same as gzip and compress. (Sec 3.5 RFC + * 2616). zlib cannot handle compress. However, errors are + * handled further down when the response body is processed + */ + char *start; + + /* Find the first non-space letter */ + start = k->p + 17; + while(*start && ISSPACE(*start)) + start++; + + /* Record the content-encoding for later use */ + if(checkprefix("identity", start)) + k->auto_decoding = IDENTITY; + else if(checkprefix("deflate", start)) + k->auto_decoding = DEFLATE; + else if(checkprefix("gzip", start) + || checkprefix("x-gzip", start)) + k->auto_decoding = GZIP; + else if(checkprefix("compress", start) + || checkprefix("x-compress", start)) + k->auto_decoding = COMPRESS; + } + else if(checkprefix("Content-Range:", k->p)) { + /* Content-Range: bytes [num]- + Content-Range: bytes: [num]- + Content-Range: [num]- + + The second format was added since Sun's webserver + JavaWebServer/1.1.1 obviously sends the header this way! + The third added since some servers use that! + */ + + char *ptr = k->p + 14; + + /* Move forward until first digit */ + while(*ptr && !ISDIGIT(*ptr)) + ptr++; + + k->offset = curlx_strtoofft(ptr, NULL, 10); + + if(data->state.resume_from == k->offset) + /* we asked for a resume and we got it */ + k->content_range = TRUE; + } +#if !defined(CURL_DISABLE_COOKIES) + else if(data->cookies && + checkprefix("Set-Cookie:", k->p)) { + Curl_share_lock(data, CURL_LOCK_DATA_COOKIE, + CURL_LOCK_ACCESS_SINGLE); + Curl_cookie_add(data, + data->cookies, TRUE, k->p+11, + /* If there is a custom-set Host: name, use it + here, or else use real peer host name. */ + conn->allocptr.cookiehost? + conn->allocptr.cookiehost:conn->host.name, + data->state.path); + Curl_share_unlock(data, CURL_LOCK_DATA_COOKIE); + } +#endif + else if(checkprefix("Last-Modified:", k->p) && + (data->set.timecondition || data->set.get_filetime) ) { + time_t secs=time(NULL); + k->timeofdoc = curl_getdate(k->p+strlen("Last-Modified:"), + &secs); + if(data->set.get_filetime) + data->info.filetime = (long)k->timeofdoc; + } + else if((checkprefix("WWW-Authenticate:", k->p) && + (401 == k->httpcode)) || + (checkprefix("Proxy-authenticate:", k->p) && + (407 == k->httpcode))) { + result = Curl_http_input_auth(conn, k->httpcode, k->p); + if(result) + return result; + } + else if((k->httpcode >= 300 && k->httpcode < 400) && + checkprefix("Location:", k->p) && + !data->req.location) { + /* this is the URL that the server advises us to use instead */ + char *location = copy_header_value(k->p); + if(!location) + return CURLE_OUT_OF_MEMORY; + if(!*location) + /* ignore empty data */ + free(location); + else { + data->req.location = location; + + if(data->set.http_follow_location) { + DEBUGASSERT(!data->req.newurl); + data->req.newurl = strdup(data->req.location); /* clone */ + if(!data->req.newurl) + return CURLE_OUT_OF_MEMORY; + + /* some cases of POST and PUT etc needs to rewind the data + stream at this point */ + result = http_perhapsrewind(conn); + if(result) + return result; + } + } + } + else if(conn->handler->protocol & CURLPROTO_RTSP) { + result = Curl_rtsp_parseheader(conn, k->p); + if(result) + return result; + } + + /* + * End of header-checks. Write them to the client. + */ + + writetype = CLIENTWRITE_HEADER; + if(data->set.include_header) + writetype |= CLIENTWRITE_BODY; + + if(data->set.verbose) + Curl_debug(data, CURLINFO_HEADER_IN, + k->p, (size_t)k->hbuflen, conn); + + result = Curl_client_write(conn, writetype, k->p, k->hbuflen); + if(result) + return result; + + data->info.header_size += (long)k->hbuflen; + data->req.headerbytecount += (long)k->hbuflen; + + /* reset hbufp pointer && hbuflen */ + k->hbufp = data->state.headerbuff; + k->hbuflen = 0; + } + while(!*stop_reading && *k->str); /* header line within buffer */ + + /* We might have reached the end of the header part here, but + there might be a non-header part left in the end of the read + buffer. */ + + return CURLE_OK; +} + +#endif /* CURL_DISABLE_HTTP */ |