1 files changed, 102 insertions, 44 deletions
diff --git a/libs/sqlite3/src/sqlite3.h b/libs/sqlite3/src/sqlite3.h
index d9905abfb5..3b5d6fd241 100644
--- a/libs/sqlite3/src/sqlite3.h
+++ b/libs/sqlite3/src/sqlite3.h
@@ -133,7 +133,7 @@ extern "C" {
 **
 ** Since [version 3.6.18] ([dateof:3.6.18]),
 ** SQLite source code has been stored in the
-** <a href="http://www.fossil-scm.org/">Fossil configuration management
+** <a href="http://fossil-scm.org/">Fossil configuration management
 ** system</a>.  ^The SQLITE_SOURCE_ID macro evaluates to
 ** a string which identifies a particular check-in of SQLite
 ** within its configuration management system.  ^The SQLITE_SOURCE_ID
@@ -146,9 +146,9 @@ extern "C" {
 ** [sqlite3_libversion_number()], [sqlite3_sourceid()],
 ** [sqlite_version()] and [sqlite_source_id()].
 */
-#define SQLITE_VERSION        "3.49.2"
-#define SQLITE_VERSION_NUMBER 3049002
-#define SQLITE_SOURCE_ID      "2025-05-07 10:39:52 17144570b0d96ae63cd6f3edca39e27ebd74925252bbaf6723bcb2f6b4861fb1"
+#define SQLITE_VERSION        "3.50.0"
+#define SQLITE_VERSION_NUMBER 3050000
+#define SQLITE_SOURCE_ID      "2025-05-29 14:26:00 dfc790f998f450d9c35e3ba1c8c89c17466cb559f87b0239e4aab9d34e28f742"
 
 /*
 ** CAPI3REF: Run-Time Library Version Numbers
@@ -1163,6 +1163,12 @@ struct sqlite3_io_methods {
 ** the value that M is to be set to. Before returning, the 32-bit signed
 ** integer is overwritten with the previous value of M.
 **
+** <li>[[SQLITE_FCNTL_BLOCK_ON_CONNECT]]
+** The [SQLITE_FCNTL_BLOCK_ON_CONNECT] opcode is used to configure the
+** VFS to block when taking a SHARED lock to connect to a wal mode database.
+** This is used to implement the functionality associated with
+** SQLITE_SETLK_BLOCK_ON_CONNECT.
+**
 ** <li>[[SQLITE_FCNTL_DATA_VERSION]]
 ** The [SQLITE_FCNTL_DATA_VERSION] opcode is used to detect changes to
 ** a database file.  The argument is a pointer to a 32-bit unsigned integer.
@@ -1259,6 +1265,7 @@ struct sqlite3_io_methods {
 #define SQLITE_FCNTL_CKSM_FILE              41
 #define SQLITE_FCNTL_RESET_CACHE            42
 #define SQLITE_FCNTL_NULL_IO                43
+#define SQLITE_FCNTL_BLOCK_ON_CONNECT       44
 
 /* deprecated names */
 #define SQLITE_GET_LOCKPROXYFILE      SQLITE_FCNTL_GET_LOCKPROXYFILE
@@ -1989,13 +1996,16 @@ struct sqlite3_mem_methods {
 **
 ** [[SQLITE_CONFIG_LOOKASIDE]] <dt>SQLITE_CONFIG_LOOKASIDE</dt>
 ** <dd> ^(The SQLITE_CONFIG_LOOKASIDE option takes two arguments that determine
-** the default size of lookaside memory on each [database connection].
+** the default size of [lookaside memory] on each [database connection].
 ** The first argument is the
-** size of each lookaside buffer slot and the second is the number of
-** slots allocated to each database connection.)^  ^(SQLITE_CONFIG_LOOKASIDE
-** sets the <i>default</i> lookaside size. The [SQLITE_DBCONFIG_LOOKASIDE]
-** option to [sqlite3_db_config()] can be used to change the lookaside
-** configuration on individual connections.)^ </dd>
+** size of each lookaside buffer slot ("sz") and the second is the number of
+** slots allocated to each database connection ("cnt").)^
+** ^(SQLITE_CONFIG_LOOKASIDE sets the <i>default</i> lookaside size.
+** The [SQLITE_DBCONFIG_LOOKASIDE] option to [sqlite3_db_config()] can
+** be used to change the lookaside configuration on individual connections.)^
+** The [-DSQLITE_DEFAULT_LOOKASIDE] option can be used to change the
+** default lookaside configuration at compile-time.
+** </dd>
 **
 ** [[SQLITE_CONFIG_PCACHE2]] <dt>SQLITE_CONFIG_PCACHE2</dt>
 ** <dd> ^(The SQLITE_CONFIG_PCACHE2 option takes a single argument which is
@@ -2232,31 +2242,50 @@ struct sqlite3_mem_methods {
 ** [[SQLITE_DBCONFIG_LOOKASIDE]]
 ** <dt>SQLITE_DBCONFIG_LOOKASIDE</dt>
 ** <dd> The SQLITE_DBCONFIG_LOOKASIDE option is used to adjust the
-** configuration of the lookaside memory allocator within a database
+** configuration of the [lookaside memory allocator] within a database
 ** connection.
 ** The arguments to the SQLITE_DBCONFIG_LOOKASIDE option are <i>not</i>
 ** in the [DBCONFIG arguments|usual format].
 ** The SQLITE_DBCONFIG_LOOKASIDE option takes three arguments, not two,
 ** so that a call to [sqlite3_db_config()] that uses SQLITE_DBCONFIG_LOOKASIDE
 ** should have a total of five parameters.
-** ^The first argument (the third parameter to [sqlite3_db_config()] is a
+** <ol>
+** <li><p>The first argument ("buf") is a
 ** pointer to a memory buffer to use for lookaside memory.
-** ^The first argument after the SQLITE_DBCONFIG_LOOKASIDE verb
-** may be NULL in which case SQLite will allocate the
-** lookaside buffer itself using [sqlite3_malloc()]. ^The second argument is the
-** size of each lookaside buffer slot.  ^The third argument is the number of
-** slots.  The size of the buffer in the first argument must be greater than
-** or equal to the product of the second and third arguments.  The buffer
-** must be aligned to an 8-byte boundary.  ^If the second argument to
-** SQLITE_DBCONFIG_LOOKASIDE is not a multiple of 8, it is internally
-** rounded down to the next smaller multiple of 8.  ^(The lookaside memory
+** The first argument may be NULL in which case SQLite will allocate the
+** lookaside buffer itself using [sqlite3_malloc()].
+** <li><P>The second argument ("sz") is the
+** size of each lookaside buffer slot.  Lookaside is disabled if "sz"
+** is less than 8.  The "sz" argument should be a multiple of 8 less than
+** 65536.  If "sz" does not meet this constraint, it is reduced in size until
+** it does.
+** <li><p>The third argument ("cnt") is the number of slots. Lookaside is disabled
+** if "cnt"is less than 1.  The "cnt" value will be reduced, if necessary, so
+** that the product of "sz" and "cnt" does not exceed 2,147,418,112.  The "cnt"
+** parameter is usually chosen so that the product of "sz" and "cnt" is less
+** than 1,000,000.
+** </ol>
+** <p>If the "buf" argument is not NULL, then it must
+** point to a memory buffer with a size that is greater than
+** or equal to the product of "sz" and "cnt".
+** The buffer must be aligned to an 8-byte boundary.
+** The lookaside memory
 ** configuration for a database connection can only be changed when that
 ** connection is not currently using lookaside memory, or in other words
-** when the "current value" returned by
-** [sqlite3_db_status](D,[SQLITE_DBSTATUS_LOOKASIDE_USED],...) is zero.
+** when the value returned by [SQLITE_DBSTATUS_LOOKASIDE_USED] is zero.
 ** Any attempt to change the lookaside memory configuration when lookaside
 ** memory is in use leaves the configuration unchanged and returns
-** [SQLITE_BUSY].)^</dd>
+** [SQLITE_BUSY].
+** If the "buf" argument is NULL and an attempt
+** to allocate memory based on "sz" and "cnt" fails, then
+** lookaside is silently disabled.
+** <p>
+** The [SQLITE_CONFIG_LOOKASIDE] configuration option can be used to set the
+** default lookaside configuration at initialization.  The
+** [-DSQLITE_DEFAULT_LOOKASIDE] option can be used to set the default lookaside
+** configuration at compile-time.  Typical values for lookaside are 1200 for
+** "sz" and 40 to 100 for "cnt".
+** </dd>
 **
 ** [[SQLITE_DBCONFIG_ENABLE_FKEY]]
 ** <dt>SQLITE_DBCONFIG_ENABLE_FKEY</dt>
@@ -2994,6 +3023,44 @@ SQLITE_API int sqlite3_busy_handler(sqlite3*,int(*)(void*,int),void*);
 SQLITE_API int sqlite3_busy_timeout(sqlite3*, int ms);
 
 /*
+** CAPI3REF: Set the Setlk Timeout
+** METHOD: sqlite3
+**
+** This routine is only useful in SQLITE_ENABLE_SETLK_TIMEOUT builds. If
+** the VFS supports blocking locks, it sets the timeout in ms used by
+** eligible locks taken on wal mode databases by the specified database
+** handle. In non-SQLITE_ENABLE_SETLK_TIMEOUT builds, or if the VFS does
+** not support blocking locks, this function is a no-op.
+**
+** Passing 0 to this function disables blocking locks altogether. Passing
+** -1 to this function requests that the VFS blocks for a long time -
+** indefinitely if possible. The results of passing any other negative value
+** are undefined.
+**
+** Internally, each SQLite database handle store two timeout values - the
+** busy-timeout (used for rollback mode databases, or if the VFS does not
+** support blocking locks) and the setlk-timeout (used for blocking locks
+** on wal-mode databases). The sqlite3_busy_timeout() method sets both
+** values, this function sets only the setlk-timeout value. Therefore,
+** to configure separate busy-timeout and setlk-timeout values for a single
+** database handle, call sqlite3_busy_timeout() followed by this function.
+**
+** Whenever the number of connections to a wal mode database falls from
+** 1 to 0, the last connection takes an exclusive lock on the database,
+** then checkpoints and deletes the wal file. While it is doing this, any
+** new connection that tries to read from the database fails with an
+** SQLITE_BUSY error. Or, if the SQLITE_SETLK_BLOCK_ON_CONNECT flag is
+** passed to this API, the new connection blocks until the exclusive lock
+** has been released.
+*/
+SQLITE_API int sqlite3_setlk_timeout(sqlite3*, int ms, int flags);
+
+/*
+** CAPI3REF: Flags for sqlite3_setlk_timeout()
+*/
+#define SQLITE_SETLK_BLOCK_ON_CONNECT 0x01
+
+/*
 ** CAPI3REF: Convenience Routines For Running Queries
 ** METHOD: sqlite3
 **
@@ -5108,7 +5175,7 @@ SQLITE_API const void *sqlite3_column_decltype16(sqlite3_stmt*,int);
 ** other than [SQLITE_ROW] before any subsequent invocation of
 ** sqlite3_step().  Failure to reset the prepared statement using
 ** [sqlite3_reset()] would result in an [SQLITE_MISUSE] return from
-** sqlite3_step().  But after [version 3.6.23.1] ([dateof:3.6.23.1],
+** sqlite3_step().  But after [version 3.6.23.1] ([dateof:3.6.23.1]),
 ** sqlite3_step() began
 ** calling [sqlite3_reset()] automatically in this circumstance rather
 ** than returning [SQLITE_MISUSE].  This is not considered a compatibility
@@ -7004,6 +7071,8 @@ SQLITE_API int sqlite3_autovacuum_pages(
 **
 ** ^The second argument is a pointer to the function to invoke when a
 ** row is updated, inserted or deleted in a rowid table.
+** ^The update hook is disabled by invoking sqlite3_update_hook()
+** with a NULL pointer as the second parameter.
 ** ^The first argument to the callback is a copy of the third argument
 ** to sqlite3_update_hook().
 ** ^The second callback argument is one of [SQLITE_INSERT], [SQLITE_DELETE],
@@ -11486,9 +11555,10 @@ SQLITE_API void sqlite3session_table_filter(
 ** is inserted while a session object is enabled, then later deleted while
 ** the same session object is disabled, no INSERT record will appear in the
 ** changeset, even though the delete took place while the session was disabled.
-** Or, if one field of a row is updated while a session is disabled, and
-** another field of the same row is updated while the session is enabled, the
-** resulting changeset will contain an UPDATE change that updates both fields.
+** Or, if one field of a row is updated while a session is enabled, and
+** then another field of the same row is updated while the session is disabled,
+** the resulting changeset will contain an UPDATE change that updates both
+** fields.
 */
 SQLITE_API int sqlite3session_changeset(
   sqlite3_session *pSession,      /* Session object */
@@ -11560,8 +11630,9 @@ SQLITE_API sqlite3_int64 sqlite3session_changeset_size(sqlite3_session *pSession
 ** database zFrom the contents of the two compatible tables would be
 ** identical.
 **
-** It an error if database zFrom does not exist or does not contain the
-** required compatible table.
+** Unless the call to this function is a no-op as described above, it is an
+** error if database zFrom does not exist or does not contain the required
+** compatible table.
 **
 ** If the operation is successful, SQLITE_OK is returned. Otherwise, an SQLite
 ** error code. In this case, if argument pzErrMsg is not NULL, *pzErrMsg
@@ -11696,7 +11767,7 @@ SQLITE_API int sqlite3changeset_start_v2(
 ** The following flags may passed via the 4th parameter to
 ** [sqlite3changeset_start_v2] and [sqlite3changeset_start_v2_strm]:
 **
-** <dt>SQLITE_CHANGESETAPPLY_INVERT <dd>
+** <dt>SQLITE_CHANGESETSTART_INVERT <dd>
 **   Invert the changeset while iterating through it. This is equivalent to
 **   inverting a changeset using sqlite3changeset_invert() before applying it.
 **   It is an error to specify this flag with a patchset.
@@ -12011,19 +12082,6 @@ SQLITE_API int sqlite3changeset_concat(
   void **ppOut                    /* OUT: Buffer containing output changeset */
 );
 
-
-/*
-** CAPI3REF: Upgrade the Schema of a Changeset/Patchset
-*/
-SQLITE_API int sqlite3changeset_upgrade(
-  sqlite3 *db,
-  const char *zDb,
-  int nIn, const void *pIn,       /* Input changeset */
-  int *pnOut, void **ppOut        /* OUT: Inverse of input */
-);
-
-
-
 /*
 ** CAPI3REF: Changegroup Handle
 **