path: root/libs/libmdbx/src/mdbx.h

/* LICENSE AND COPYRUSTING *****************************************************
 *
 * Copyright 2015-2018 Leonid Yuriev <leo@yuriev.ru>
 * and other libmdbx authors: please see AUTHORS file.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted only as authorized by the OpenLDAP
 * Public License.
 *
 * A copy of this license is available in the file LICENSE in the
 * top-level directory of the distribution or, alternatively, at
 * <http://www.OpenLDAP.org/license.html>.
 *
 * ---
 *
 * This code is derived from "LMDB engine" written by
 * Howard Chu (Symas Corporation), which itself derived from btree.c
 * written by Martin Hedenfalk.
 *
 * ---
 *
 * Portions Copyright 2011-2015 Howard Chu, Symas Corp. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted only as authorized by the OpenLDAP
 * Public License.
 *
 * A copy of this license is available in the file LICENSE in the
 * top-level directory of the distribution or, alternatively, at
 * <http://www.OpenLDAP.org/license.html>.
 *
 * ---
 *
 * Portions Copyright (c) 2009, 2010 Martin Hedenfalk <martin@bzero.se>
 *
 * Permission to use, copy, modify, and distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */

/* ACKNOWLEDGEMENTS ************************************************************
 *
 * Howard Chu (Symas Corporation) - the author of LMDB,
 * from which originated the MDBX in 2015.
 *
 * Martin Hedenfalk <martin@bzero.se> - the author of `btree.c` code,
 * which was used for begin development of LMDB. */

#pragma once
#ifndef LIBMDBX_H
#define LIBMDBX_H

/* IMPENDING CHANGES WARNING ***************************************************
 *
 * MDBX is under active development, database format and API aren't stable
 * at least until 2018Q2. New version won't be backwards compatible. Main focus
 * of the rework is to provide clear and robust API and new features.
 *
 ******************************************************************************/

#ifdef _MSC_VER
#pragma warning(push, 1)
#pragma warning(disable : 4548) /* expression before comma has no effect;      \
                                   expected expression with side - effect */
#pragma warning(disable : 4530) /* C++ exception handler used, but unwind      \
                                 * semantics are not enabled. Specify /EHsc */
#pragma warning(disable : 4577) /* 'noexcept' used with no exception handling  \
                                 * mode specified; termination on exception is \
                                 * not guaranteed. Specify /EHsc */
#endif                          /* _MSC_VER (warnings) */

#include <stdarg.h>
#include <stddef.h>
#include <stdint.h>

#if defined(_WIN32) || defined(_WIN64)

#include <windows.h>
#include <winnt.h>

#ifndef FSCTL_GET_EXTERNAL_BACKING
#define FSCTL_GET_EXTERNAL_BACKING CTL_CODE(FILE_DEVICE_FILE_SYSTEM, 196, METHOD_BUFFERED, FILE_ANY_ACCESS)
#endif

#ifndef __mode_t_defined
typedef unsigned short mode_t;
#endif
typedef HANDLE mdbx_filehandle_t;
typedef DWORD mdbx_pid_t;
typedef DWORD mdbx_tid_t;
#define MDBX_ENODATA ERROR_HANDLE_EOF
#define MDBX_EINVAL ERROR_INVALID_PARAMETER
#define MDBX_EACCESS ERROR_ACCESS_DENIED
#define MDBX_ENOMEM ERROR_OUTOFMEMORY
#define MDBX_EROFS ERROR_FILE_READ_ONLY
#define MDBX_ENOSYS ERROR_NOT_SUPPORTED
#define MDBX_EIO ERROR_WRITE_FAULT
#define MDBX_EPERM ERROR_INVALID_FUNCTION
#define MDBX_EINTR ERROR_CANCELLED
#define MDBX_ENOFILE ERROR_FILE_NOT_FOUND

#else

#include <errno.h>     /* for error codes */
#include <pthread.h>   /* for pthread_t */
#include <sys/types.h> /* for pid_t */
#include <sys/uio.h>   /* for truct iovec */
#define HAVE_STRUCT_IOVEC 1
typedef int mdbx_filehandle_t;
typedef pid_t mdbx_pid_t;
typedef pthread_t mdbx_tid_t;
#define MDBX_ENODATA ENODATA
#define MDBX_EINVAL EINVAL
#define MDBX_EACCESS EACCES
#define MDBX_ENOMEM ENOMEM
#define MDBX_EROFS EROFS
#define MDBX_ENOSYS ENOSYS
#define MDBX_EIO EIO
#define MDBX_EPERM EPERM
#define MDBX_EINTR EINTR
#define MDBX_ENOFILE ENOENT

#endif

#ifdef _MSC_VER
#pragma warning(pop)
#endif

/*--------------------------------------------------------------------------*/

#ifndef __has_attribute
#define __has_attribute(x) (0)
#endif

#ifndef __dll_export
#if defined(_WIN32) || defined(__CYGWIN__)
#if defined(__GNUC__) || __has_attribute(dllexport)
#define __dll_export __attribute__((dllexport))
#elif defined(_MSC_VER)
#define __dll_export __declspec(dllexport)
#else
#define __dll_export
#endif
#elif defined(__GNUC__) || __has_attribute(visibility)
#define __dll_export __attribute__((visibility("default")))
#else
#define __dll_export
#endif
#endif /* __dll_export */

#ifndef __dll_import
#if defined(_WIN32) || defined(__CYGWIN__)
#if defined(__GNUC__) || __has_attribute(dllimport)
#define __dll_import __attribute__((dllimport))
#elif defined(_MSC_VER)
#define __dll_import __declspec(dllimport)
#else
#define __dll_import
#endif
#else
#define __dll_import
#endif
#endif /* __dll_import */

/*--------------------------------------------------------------------------*/

#define MDBX_VERSION_MAJOR 0
#define MDBX_VERSION_MINOR 2

#if defined(LIBMDBX_EXPORTS)
#define LIBMDBX_API __dll_export
#elif defined(LIBMDBX_IMPORTS)
#define LIBMDBX_API __dll_import
#else
#define LIBMDBX_API
#endif /* LIBMDBX_API */

#ifdef __cplusplus
extern "C" {
#endif

typedef struct mdbx_version_info {
  uint8_t major;
  uint8_t minor;
  uint16_t release;
  uint32_t revision;
  struct {
    const char *datetime;
    const char *tree;
    const char *commit;
    const char *describe;
  } git;
} mdbx_version_info;

typedef struct mdbx_build_info {
  const char *datetime;
  const char *target;
  const char *options;
  const char *compiler;
  const char *flags;
} mdbx_build_info;

extern LIBMDBX_API const mdbx_version_info mdbx_version;
extern LIBMDBX_API const mdbx_build_info mdbx_build;

#if defined(_WIN32) || defined(_WIN64)

/* Dll initialization callback for ability to dynamically load MDBX DLL by
 * LoadLibrary() on Windows versions before Windows Vista. This function MUST be
 * called once from DllMain() for each reason (DLL_PROCESS_ATTACH,
 * DLL_PROCESS_DETACH, DLL_THREAD_ATTACH and DLL_THREAD_DETACH). Do this
 * carefully and ONLY when actual Windows version don't support initialization
 * via "TLS Directory" (e.g .CRT$XL[A-Z] sections in executable or dll file). */

#ifndef MDBX_CONFIG_MANUAL_TLS_CALLBACK
#define MDBX_CONFIG_MANUAL_TLS_CALLBACK 0
#endif
#if MDBX_CONFIG_MANUAL_TLS_CALLBACK
void LIBMDBX_API NTAPI mdbx_dll_callback(PVOID module, DWORD reason,
                                         PVOID reserved);
#endif /* MDBX_CONFIG_MANUAL_TLS_CALLBACK */
#endif /* Windows */

/* The name of the lock file in the DB environment */
#define MDBX_LOCKNAME "/mdbx.lck"
/* The name of the data file in the DB environment */
#define MDBX_DATANAME "/mdbx.dat"
/* The suffix of the lock file when no subdir is used */
#define MDBX_LOCK_SUFFIX "-lck"

/* Opaque structure for a database environment.
 *
 * A DB environment supports multiple databases, all residing in the same
 * shared-memory map. */
typedef struct MDBX_env MDBX_env;

/* Opaque structure for a transaction handle.
 *
 * All database operations require a transaction handle. Transactions may be
 * read-only or read-write. */
typedef struct MDBX_txn MDBX_txn;

/* A handle for an individual database in the DB environment. */
typedef uint32_t MDBX_dbi;

/* Opaque structure for navigating through a database */
typedef struct MDBX_cursor MDBX_cursor;

/* Generic structure used for passing keys and data in and out
 * of the database.
 *
 * Values returned from the database are valid only until a subsequent
 * update operation, or the end of the transaction. Do not modify or
 * free them, they commonly point into the database itself.
 *
 * Key sizes must be between 1 and mdbx_env_get_maxkeysize() inclusive.
 * The same applies to data sizes in databases with the MDBX_DUPSORT flag.
 * Other data items can in theory be from 0 to 0xffffffff bytes long. */
#ifndef HAVE_STRUCT_IOVEC
struct iovec {
  void *iov_base;
  size_t iov_len;
};
#define HAVE_STRUCT_IOVEC
#endif /* HAVE_STRUCT_IOVEC */

typedef struct iovec MDBX_val;

/* The maximum size of a data item.
 * MDBX only store a 32 bit value for node sizes. */
#define MDBX_MAXDATASIZE INT32_MAX

/* A callback function used to compare two keys in a database */
typedef int(MDBX_cmp_func)(const MDBX_val *a, const MDBX_val *b);

/* Environment Flags */
/* no environment directory */
#define MDBX_NOSUBDIR 0x4000u
/* don't fsync after commit */
#define MDBX_NOSYNC 0x10000u
/* read only */
#define MDBX_RDONLY 0x20000u
/* don't fsync metapage after commit */
#define MDBX_NOMETASYNC 0x40000u
/* use writable mmap */
#define MDBX_WRITEMAP 0x80000u
/* use asynchronous msync when MDBX_WRITEMAP is used */
#define MDBX_MAPASYNC 0x100000u
/* tie reader locktable slots to MDBX_txn objects instead of to threads */
#define MDBX_NOTLS 0x200000u
/* open DB in exclusive/monopolistic mode. */
#define MDBX_EXCLUSIVE 0x400000u
/* don't do readahead */
#define MDBX_NORDAHEAD 0x800000u
/* don't initialize malloc'd memory before writing to datafile */
#define MDBX_NOMEMINIT 0x1000000u
/* aim to coalesce FreeDB records */
#define MDBX_COALESCE 0x2000000u
/* LIFO policy for reclaiming FreeDB records */
#define MDBX_LIFORECLAIM 0x4000000u
/* make a steady-sync only on close and explicit env-sync */
#define MDBX_UTTERLY_NOSYNC (MDBX_NOSYNC | MDBX_MAPASYNC)
/* debuging option, fill/perturb released pages */
#define MDBX_PAGEPERTURB 0x8000000u

/* Database Flags */
/* use reverse string keys */
#define MDBX_REVERSEKEY 0x02u
/* use sorted duplicates */
#define MDBX_DUPSORT 0x04u
/* numeric keys in native byte order, either uint32_t or uint64_t.
 * The keys must all be of the same size. */
#define MDBX_INTEGERKEY 0x08u
/* with MDBX_DUPSORT, sorted dup items have fixed size */
#define MDBX_DUPFIXED 0x10u
/* with MDBX_DUPSORT, dups are MDBX_INTEGERKEY-style integers */
#define MDBX_INTEGERDUP 0x20u
/* with MDBX_DUPSORT, use reverse string dups */
#define MDBX_REVERSEDUP 0x40u
/* create DB if not already existing */
#define MDBX_CREATE 0x40000u

/* Write Flags */
/* For put: Don't write if the key already exists. */
#define MDBX_NOOVERWRITE 0x10u
/* Only for MDBX_DUPSORT
 * For put: don't write if the key and data pair already exist.
 * For mdbx_cursor_del: remove all duplicate data items. */
#define MDBX_NODUPDATA 0x20u
/* For mdbx_cursor_put: overwrite the current key/data pair
 * MDBX allows this flag for mdbx_put() for explicit overwrite/update without
 * insertion. */
#define MDBX_CURRENT 0x40u
/* For put: Just reserve space for data, don't copy it. Return a
 * pointer to the reserved space. */
#define MDBX_RESERVE 0x10000u
/* Data is being appended, don't split full pages. */
#define MDBX_APPEND 0x20000u
/* Duplicate data is being appended, don't split full pages. */
#define MDBX_APPENDDUP 0x40000u
/* Store multiple data items in one call. Only for MDBX_DUPFIXED. */
#define MDBX_MULTIPLE 0x80000u

/* Transaction Flags */
/* Do not block when starting a write transaction */
#define MDBX_TRYTXN 0x10000000u

/* Copy Flags */
/* Compacting copy: Omit free space from copy, and renumber all
 * pages sequentially. */
#define MDBX_CP_COMPACT 1u

/* Cursor Get operations.
 *
 * This is the set of all operations for retrieving data
 * using a cursor. */
typedef enum MDBX_cursor_op {
  MDBX_FIRST,          /* Position at first key/data item */
  MDBX_FIRST_DUP,      /* MDBX_DUPSORT-only: Position at first data item
                        * of current key. */
  MDBX_GET_BOTH,       /* MDBX_DUPSORT-only: Position at key/data pair. */
  MDBX_GET_BOTH_RANGE, /* MDBX_DUPSORT-only: position at key, nearest data. */
  MDBX_GET_CURRENT,    /* Return key/data at current cursor position */
  MDBX_GET_MULTIPLE,   /* MDBX_DUPFIXED-only: Return key and up to a page of
                        * duplicate data items from current cursor position.
                        * Move cursor to prepare for MDBX_NEXT_MULTIPLE.*/
  MDBX_LAST,           /* Position at last key/data item */
  MDBX_LAST_DUP,       /* MDBX_DUPSORT-only: Position at last data item
                        * of current key. */
  MDBX_NEXT,           /* Position at next data item */
  MDBX_NEXT_DUP,       /* MDBX_DUPSORT-only: Position at next data item
                        * of current key. */
  MDBX_NEXT_MULTIPLE,  /* MDBX_DUPFIXED-only: Return key and up to a page of
                        * duplicate data items from next cursor position.
                        * Move cursor to prepare for MDBX_NEXT_MULTIPLE. */
  MDBX_NEXT_NODUP,     /* Position at first data item of next key */
  MDBX_PREV,           /* Position at previous data item */
  MDBX_PREV_DUP,       /* MDBX_DUPSORT-only: Position at previous data item
                        * of current key. */
  MDBX_PREV_NODUP,     /* Position at last data item of previous key */
  MDBX_SET,            /* Position at specified key */
  MDBX_SET_KEY,        /* Position at specified key, return both key and data */
  MDBX_SET_RANGE,      /* Position at first key greater than or equal to
                        * specified key. */
  MDBX_PREV_MULTIPLE   /* MDBX_DUPFIXED-only: Position at previous page and
                        * return key and up to a page of duplicate data items. */
} MDBX_cursor_op;

/* Return Codes
 * BerkeleyDB uses -30800 to -30999, we'll go under them */

/* Successful result */
#define MDBX_SUCCESS 0
#define MDBX_RESULT_FALSE MDBX_SUCCESS
#define MDBX_RESULT_TRUE (-1)

/* key/data pair already exists */
#define MDBX_KEYEXIST (-30799)
/* key/data pair not found (EOF) */
#define MDBX_NOTFOUND (-30798)
/* Requested page not found - this usually indicates corruption */
#define MDBX_PAGE_NOTFOUND (-30797)
/* Located page was wrong type */
#define MDBX_CORRUPTED (-30796)
/* Update of meta page failed or environment had fatal error */
#define MDBX_PANIC (-30795)
/* DB file version mismatch with libmdbx */
#define MDBX_VERSION_MISMATCH (-30794)
/* File is not a valid MDBX file */
#define MDBX_INVALID (-30793)
/* Environment mapsize reached */
#define MDBX_MAP_FULL (-30792)
/* Environment maxdbs reached */
#define MDBX_DBS_FULL (-30791)
/* Environment maxreaders reached */
#define MDBX_READERS_FULL (-30790)
/* Txn has too many dirty pages */
#define MDBX_TXN_FULL (-30788)
/* Cursor stack too deep - internal error */
#define MDBX_CURSOR_FULL (-30787)
/* Page has not enough space - internal error */
#define MDBX_PAGE_FULL (-30786)
/* Database contents grew beyond environment mapsize */
#define MDBX_MAP_RESIZED (-30785)
/* Operation and DB incompatible, or DB type changed. This can mean:
 *  - The operation expects an MDBX_DUPSORT / MDBX_DUPFIXED database.
 *  - Opening a named DB when the unnamed DB has MDBX_DUPSORT/MDBX_INTEGERKEY.
 *  - Accessing a data record as a database, or vice versa.
 *  - The database was dropped and recreated with different flags. */
#define MDBX_INCOMPATIBLE (-30784)
/* Invalid reuse of reader locktable slot */
#define MDBX_BAD_RSLOT (-30783)
/* Transaction must abort, has a child, or is invalid */
#define MDBX_BAD_TXN (-30782)
/* Unsupported size of key/DB name/data, or wrong DUPFIXED size */
#define MDBX_BAD_VALSIZE (-30781)
/* The specified DBI was changed unexpectedly */
#define MDBX_BAD_DBI (-30780)
/* Unexpected problem - txn should abort */
#define MDBX_PROBLEM (-30779)
/* Another write transaction is running */
#define MDBX_BUSY (-30778)
/* The last defined error code */
#define MDBX_LAST_ERRCODE MDBX_BUSY

/* The mdbx_put() or mdbx_replace() was called for key,
    that has more that one associated value. */
#define MDBX_EMULTIVAL (-30421)

/* Bad signature of a runtime object(s), this can mean:
 *  - memory corruption or double-free;
 *  - ABI version mismatch (rare case); */
#define MDBX_EBADSIGN (-30420)

/* Database should be recovered, but this could NOT be done automatically
 * right now (e.g. in readonly mode and so forth). */
#define MDBX_WANNA_RECOVERY (-30419)

/* The given key value is mismatched to the current cursor position,
 * when mdbx_cursor_put() called with MDBX_CURRENT option. */
#define MDBX_EKEYMISMATCH (-30418)

/* Database is too large for current system,
 * e.g. could NOT be mapped into RAM. */
#define MDBX_TOO_LARGE (-30417)

/* A thread has attempted to use a not owned object,
 * e.g. a transaction that started by another thread. */
#define MDBX_THREAD_MISMATCH (-30416)

/* Statistics for a database in the environment */
typedef struct MDBX_stat {
  uint32_t ms_psize;          /* Size of a database page.
                               * This is currently the same for all databases. */
  uint32_t ms_depth;          /* Depth (height) of the B-tree */
  uint64_t ms_branch_pages;   /* Number of internal (non-leaf) pages */
  uint64_t ms_leaf_pages;     /* Number of leaf pages */
  uint64_t ms_overflow_pages; /* Number of overflow pages */
  uint64_t ms_entries;        /* Number of data items */
} MDBX_stat;

/* Information about the environment */
typedef struct MDBX_envinfo {
  struct {
    uint64_t lower;   /* lower limit for datafile size */
    uint64_t upper;   /* upper limit for datafile size */
    uint64_t current; /* current datafile size */
    uint64_t shrink;  /* shrink theshold for datafile */
    uint64_t grow;    /* growth step for datafile */
  } mi_geo;
  uint64_t mi_mapsize;             /* Size of the data memory map */
  uint64_t mi_last_pgno;           /* ID of the last used page */
  uint64_t mi_recent_txnid;        /* ID of the last committed transaction */
  uint64_t mi_latter_reader_txnid; /* ID of the last reader transaction */
  uint64_t mi_self_latter_reader_txnid; /* ID of the last reader transaction of
                                           caller process */
  uint64_t mi_meta0_txnid, mi_meta0_sign;
  uint64_t mi_meta1_txnid, mi_meta1_sign;
  uint64_t mi_meta2_txnid, mi_meta2_sign;
  uint32_t mi_maxreaders;   /* max reader slots in the environment */
  uint32_t mi_numreaders;   /* max reader slots used in the environment */
  uint32_t mi_dxb_pagesize; /* database pagesize */
  uint32_t mi_sys_pagesize; /* system pagesize */
} MDBX_envinfo;

/* Return a string describing a given error code.
 *
 * This function is a superset of the ANSI C X3.159-1989 (ANSI C) strerror(3)
 * function. If the error code is greater than or equal to 0, then the string
 * returned by the system function strerror(3) is returned. If the error code
 * is less than 0, an error string corresponding to the MDBX library error is
 * returned. See errors for a list of MDBX-specific error codes.
 *
 * [in] err The error code
 *
 * Returns "error message" The description of the error */
LIBMDBX_API const char *mdbx_strerror(int errnum);
LIBMDBX_API const char *mdbx_strerror_r(int errnum, char *buf, size_t buflen);

/* Create an MDBX environment handle.
 *
 * This function allocates memory for a MDBX_env structure. To release
 * the allocated memory and discard the handle, call mdbx_env_close().
 * Before the handle may be used, it must be opened using mdbx_env_open().
 * Various other options may also need to be set before opening the handle,
 * e.g. mdbx_env_set_mapsize(), mdbx_env_set_maxreaders(),
 * mdbx_env_set_maxdbs(), depending on usage requirements.
 *
 * [out] env The address where the new handle will be stored
 *
 * Returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_env_create(MDBX_env **penv);

/* Open an environment handle.
 *
 * If this function fails, mdbx_env_close() must be called to discard
 * the MDBX_env handle.
 *
 * [in] env    An environment handle returned by mdbx_env_create()
 * [in] path   The directory in which the database files reside.
 *             This directory must already exist and be writable.
 * [in] flags  Special options for this environment. This parameter
 *             must be set to 0 or by bitwise OR'ing together one
 *             or more of the values described here.
 *
 * Flags set by mdbx_env_set_flags() are also used:
 *  - MDBX_NOSUBDIR
 *      By default, MDBX creates its environment in a directory whose
 *      pathname is given in path, and creates its data and lock files
 *      under that directory. With this option, path is used as-is for
 *      the database main data file. The database lock file is the path
 *      with "-lock" appended.
 *
 *  - MDBX_RDONLY
 *      Open the environment in read-only mode. No write operations will
 *      be allowed. MDBX will still modify the lock file - except on
 *      read-only filesystems, where MDBX does not use locks.
 *
 *  - MDBX_WRITEMAP
 *      Use a writeable memory map unless MDBX_RDONLY is set. This uses fewer
 *      mallocs but loses protection from application bugs like wild pointer
 *      writes and other bad updates into the database.
 *      This may be slightly faster for DBs that fit entirely in RAM,
 *      but is slower for DBs larger than RAM.
 *      Incompatible with nested transactions.
 *      Do not mix processes with and without MDBX_WRITEMAP on the same
 *      environment.  This can defeat durability (mdbx_env_sync etc).
 *
 *  - MDBX_NOMETASYNC
 *      Flush system buffers to disk only once per transaction, omit the
 *      metadata flush. Defer that until the system flushes files to disk,
 *      or next non-MDBX_RDONLY commit or mdbx_env_sync(). This optimization
 *      maintains database integrity, but a system crash may undo the last
 *      committed transaction. I.e. it preserves the ACI (atomicity,
 *      consistency, isolation) but not D (durability) database property.
 *      This flag may be changed at any time using mdbx_env_set_flags().
 *
 *  - MDBX_NOSYNC
 *      Don't flush system buffers to disk when committing a transaction.
 *      This optimization means a system crash can corrupt the database or
 *      lose the last transactions if buffers are not yet flushed to disk.
 *      The risk is governed by how often the system flushes dirty buffers
 *      to disk and how often mdbx_env_sync() is called.  However, if the
 *      filesystem preserves write order and the MDBX_WRITEMAP and/or
 *      MDBX_LIFORECLAIM flags are not used, transactions exhibit ACI
 *      (atomicity, consistency, isolation) properties and only lose D
 *      (durability).  I.e. database integrity is maintained, but a system
 *      crash may undo the final transactions.
 *
 *      Note that (MDBX_NOSYNC | MDBX_WRITEMAP) leaves the system with no
 *      hint for when to write transactions to disk.
 *      Therefore the (MDBX_MAPASYNC | MDBX_WRITEMAP) may be preferable.
 *      This flag may be changed at any time using mdbx_env_set_flags().
 *
 *  - MDBX_UTTERLY_NOSYNC (internally MDBX_NOSYNC | MDBX_MAPASYNC)
 *      FIXME: TODO
 *
 *  - MDBX_MAPASYNC
 *      When using MDBX_WRITEMAP, use asynchronous flushes to disk. As with
 *      MDBX_NOSYNC, a system crash can then corrupt the database or lose
 *      the last transactions. Calling mdbx_env_sync() ensures on-disk
 *      database integrity until next commit. This flag may be changed at
 *      any time using mdbx_env_set_flags().
 *
 *  - MDBX_NOTLS
 *      Don't use Thread-Local Storage. Tie reader locktable slots to
 *      MDBX_txn objects instead of to threads. I.e. mdbx_txn_reset() keeps
 *      the slot reseved for the MDBX_txn object. A thread may use parallel
 *      read-only transactions. A read-only transaction may span threads if
 *      the user synchronizes its use. Applications that multiplex many
 *      user threads over individual OS threads need this option. Such an
 *      application must also serialize the write transactions in an OS
 *      thread, since MDBX's write locking is unaware of the user threads.
 *
 *  - MDBX_NOLOCK (don't supported by MDBX)
 *      Don't do any locking. If concurrent access is anticipated, the
 *      caller must manage all concurrency itself. For proper operation
 *      the caller must enforce single-writer semantics, and must ensure
 *      that no readers are using old transactions while a writer is
 *      active. The simplest approach is to use an exclusive lock so that
 *      no readers may be active at all when a writer begins.
 *
 *  - MDBX_NORDAHEAD
 *      Turn off readahead. Most operating systems perform readahead on
 *      read requests by default. This option turns it off if the OS
 *      supports it. Turning it off may help random read performance
 *      when the DB is larger than RAM and system RAM is full.
 *
 *  - MDBX_NOMEMINIT
 *      Don't initialize malloc'd memory before writing to unused spaces
 *      in the data file. By default, memory for pages written to the data
 *      file is obtained using malloc. While these pages may be reused in
 *      subsequent transactions, freshly malloc'd pages will be initialized
 *      to zeroes before use. This avoids persisting leftover data from other
 *      code (that used the heap and subsequently freed the memory) into the
 *      data file. Note that many other system libraries may allocate and free
 *      memory from the heap for arbitrary uses. E.g., stdio may use the heap
 *      for file I/O buffers. This initialization step has a modest performance
 *      cost so some applications may want to disable it using this flag. This
 *      option can be a problem for applications which handle sensitive data
 *      like passwords, and it makes memory checkers like Valgrind noisy. This
 *      flag is not needed with MDBX_WRITEMAP, which writes directly to the
 *      mmap instead of using malloc for pages. The initialization is also
 *      skipped if MDBX_RESERVE is used; the caller is expected to overwrite
 *      all of the memory that was reserved in that case. This flag may be
 *      changed at any time using mdbx_env_set_flags().
 *
 *  - MDBX_COALESCE
 *      Aim to coalesce records while reclaiming FreeDB. This flag may be
 *      changed at any time using mdbx_env_set_flags().
 *      FIXME: TODO
 *
 *  - MDBX_LIFORECLAIM
 *      LIFO policy for reclaiming FreeDB records. This significantly reduce
 *      write IPOs in case MDBX_NOSYNC with periodically checkpoints.
 *      FIXME: TODO
 *
 * [in] mode The UNIX permissions to set on created files.
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *   - MDBX_VERSION_MISMATCH - the version of the MDBX library doesn't match the
 *                             version that created the database environment.
 *   - MDBX_INVALID  - the environment file headers are corrupted.
 *   - MDBX_ENOENT   - the directory specified by the path parameter
 *                     doesn't exist.
 *   - MDBX_EACCES   - the user didn't have permission to access
 *                     the environment files.
 *   - MDBX_EAGAIN   - the environment was locked by another process. */
LIBMDBX_API int mdbx_env_open(MDBX_env *env, const char *path, unsigned flags,
                              mode_t mode);

/* Copy an MDBX environment to the specified path, with options.
 *
 * This function may be used to make a backup of an existing environment.
 * No lockfile is created, since it gets recreated at need.
 * NOTE: This call can trigger significant file size growth if run in
 * parallel with write transactions, because it employs a read-only
 * transaction. See long-lived transactions under "Caveats" section.
 *
 * [in] env    An environment handle returned by mdbx_env_create(). It must
 *             have already been opened successfully.
 * [in] path   The directory in which the copy will reside. This directory
 *             must already exist and be writable but must otherwise be empty.
 * [in] flags  Special options for this operation. This parameter must be set
 *             to 0 or by bitwise OR'ing together one or more of the values
 *             described here:
 *
 *  - MDBX_CP_COMPACT
 *      Perform compaction while copying: omit free pages and sequentially
 *      renumber all pages in output. This option consumes little bit more
 *      CPU for processing, but may running quickly than the default, on
 *      account skipping free pages.
 *
 *      NOTE: Currently it fails if the environment has suffered a page leak.
 *
 * Returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_env_copy(MDBX_env *env, const char *dest_path,
                              unsigned flags);

/* Copy an MDBX environment to the specified file descriptor,
 * with options.
 *
 * This function may be used to make a backup of an existing environment.
 * No lockfile is created, since it gets recreated at need. See
 * mdbx_env_copy() for further details.
 *
 * NOTE: This call can trigger significant file size growth if run in
 * parallel with write transactions, because it employs a read-only
 * transaction. See long-lived transactions under "Caveats" section.
 *
 * [in] env     An environment handle returned by mdbx_env_create(). It must
 *              have already been opened successfully.
 * [in] fd      The filedescriptor to write the copy to. It must have already
 *              been opened for Write access.
 * [in] flags   Special options for this operation. See mdbx_env_copy() for
 *              options.
 *
 * Returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_env_copy2fd(MDBX_env *env, mdbx_filehandle_t fd,
                                 unsigned flags);

/* Return statistics about the MDBX environment.
 *
 * [in] env     An environment handle returned by mdbx_env_create()
 * [out] stat   The address of an MDBX_stat structure where the statistics
 *              will be copied */
LIBMDBX_API int mdbx_env_stat(MDBX_env *env, MDBX_stat *stat, size_t bytes);

/* Return information about the MDBX environment.
 *
 * [in] env     An environment handle returned by mdbx_env_create()
 * [out] stat   The address of an MDBX_envinfo structure
 *              where the information will be copied */
LIBMDBX_API int mdbx_env_info(MDBX_env *env, MDBX_envinfo *info, size_t bytes);

/* Flush the data buffers to disk.
 *
 * Data is always written to disk when mdbx_txn_commit() is called,
 * but the operating system may keep it buffered. MDBX always flushes
 * the OS buffers upon commit as well, unless the environment was
 * opened with MDBX_NOSYNC or in part MDBX_NOMETASYNC. This call is
 * not valid if the environment was opened with MDBX_RDONLY.
 *
 * [in] env   An environment handle returned by mdbx_env_create()
 * [in] force If non-zero, force a synchronous flush.  Otherwise if the
 *            environment has the MDBX_NOSYNC flag set the flushes will be
 *            omitted, and with MDBX_MAPASYNC they will be asynchronous.
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *  - MDBX_EACCES   - the environment is read-only.
 *  - MDBX_EINVAL   - an invalid parameter was specified.
 *  - MDBX_EIO      - an error occurred during synchronization. */
LIBMDBX_API int mdbx_env_sync(MDBX_env *env, int force);

/* Close the environment and release the memory map.
 *
 * Only a single thread may call this function. All transactions, databases,
 * and cursors must already be closed before calling this function. Attempts
 * to use any such handles after calling this function will cause a SIGSEGV.
 * The environment handle will be freed and must not be used again after this
 * call.
 *
 * [in] env        An environment handle returned by mdbx_env_create()
 * [in] dont_sync  A dont'sync flag, if non-zero the last checkpoint (meta-page
 *                 update) will be kept "as is" and may be still "weak" in the
 *                 NOSYNC/MAPASYNC modes. Such "weak" checkpoint will be
 *                 ignored on opening next time, and transactions since the
 *                 last non-weak checkpoint (meta-page update) will rolledback
 *                 for consistency guarantee. */
LIBMDBX_API int mdbx_env_close(MDBX_env *env);

/* Set environment flags.
 *
 * This may be used to set some flags in addition to those from
 * mdbx_env_open(), or to unset these flags.  If several threads
 * change the flags at the same time, the result is undefined.
 *
 * [in] env     An environment handle returned by mdbx_env_create()
 * [in] flags   The flags to change, bitwise OR'ed together
 * [in] onoff   A non-zero value sets the flags, zero clears them.
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *  - MDBX_EINVAL   - an invalid parameter was specified. */
LIBMDBX_API int mdbx_env_set_flags(MDBX_env *env, unsigned flags, int onoff);

/* Get environment flags.
 *
 * [in] env     An environment handle returned by mdbx_env_create()
 * [out] flags  The address of an integer to store the flags
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *  - MDBX_EINVAL   - an invalid parameter was specified. */
LIBMDBX_API int mdbx_env_get_flags(MDBX_env *env, unsigned *flags);

/* Return the path that was used in mdbx_env_open().
 *
 * [in] env     An environment handle returned by mdbx_env_create()
 * [out] path   Address of a string pointer to contain the path.
 *              This is the actual string in the environment, not a copy.
 *              It should not be altered in any way.
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *  - MDBX_EINVAL   - an invalid parameter was specified. */
LIBMDBX_API int mdbx_env_get_path(MDBX_env *env, const char **path);

/* Return the file descriptor for the given environment.
 *
 * NOTE: All MDBX file descriptors have FD_CLOEXEC and
 * could't be used after exec() and or fork().
 *
 * [in] env   An environment handle returned by mdbx_env_create()
 * [out] fd   Address of a int to contain the descriptor.
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *  - MDBX_EINVAL   - an invalid parameter was specified. */
LIBMDBX_API int mdbx_env_get_fd(MDBX_env *env, mdbx_filehandle_t *fd);

/* Set the size of the memory map to use for this environment.
 *
 * The size should be a multiple of the OS page size. The default is
 * 10485760 bytes. The size of the memory map is also the maximum size
 * of the database. The value should be chosen as large as possible,
 * to accommodate future growth of the database.
 * This function should be called after mdbx_env_create() and before
 * mdbx_env_open(). It may be called at later times if no transactions
 * are active in this process. Note that the library does not check for
 * this condition, the caller must ensure it explicitly.
 *
 * The new size takes effect immediately for the current process but
 * will not be persisted to any others until a write transaction has been
 * committed by the current process. Also, only mapsize increases are
 * persisted into the environment.
 *
 * If the mapsize is increased by another process, and data has grown
 * beyond the range of the current mapsize, mdbx_txn_begin() will
 * return MDBX_MAP_RESIZED. This function may be called with a size
 * of zero to adopt the new size.
 *
 * Any attempt to set a size smaller than the space already consumed by the
 * environment will be silently changed to the current size of the used space.
 *
 * [in] env   An environment handle returned by mdbx_env_create()
 * [in] size  The size in bytes
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *  - MDBX_EINVAL   - an invalid parameter was specified,
 *                    or the environment has an active write transaction. */
LIBMDBX_API int mdbx_env_set_mapsize(MDBX_env *env, size_t size);
LIBMDBX_API int mdbx_env_set_geometry(MDBX_env *env, intptr_t size_lower,
                                      intptr_t size_now, intptr_t size_upper,
                                      intptr_t growth_step,
                                      intptr_t shrink_threshold,
                                      intptr_t pagesize);

/* Set the maximum number of threads/reader slots for the environment.
 *
 * This defines the number of slots in the lock table that is used to track
 * readers in the the environment. The default is 61.
 * Starting a read-only transaction normally ties a lock table slot to the
 * current thread until the environment closes or the thread exits. If
 * MDBX_NOTLS is in use, mdbx_txn_begin() instead ties the slot to the
 * MDBX_txn object until it or the MDBX_env object is destroyed.
 * This function may only be called after mdbx_env_create() and before
 * mdbx_env_open().
 *
 * [in] env       An environment handle returned by mdbx_env_create()
 * [in] readers   The maximum number of reader lock table slots
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *  - MDBX_EINVAL   - an invalid parameter was specified,
 *                    or the environment is already open. */
LIBMDBX_API int mdbx_env_set_maxreaders(MDBX_env *env, unsigned readers);

/* Get the maximum number of threads/reader slots for the environment.
 *
 * [in] env An environment handle returned by mdbx_env_create()
 * [out] readers Address of an integer to store the number of readers
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *  - MDBX_EINVAL   - an invalid parameter was specified. */
LIBMDBX_API int mdbx_env_get_maxreaders(MDBX_env *env, unsigned *readers);

/* Set the maximum number of named databases for the environment.
 *
 * This function is only needed if multiple databases will be used in the
 * environment. Simpler applications that use the environment as a single
 * unnamed database can ignore this option.
 * This function may only be called after mdbx_env_create() and before
 * mdbx_env_open().
 *
 * Currently a moderate number of slots are cheap but a huge number gets
 * expensive: 7-120 words per transaction, and every mdbx_dbi_open()
 * does a linear search of the opened slots.
 *
 * [in] env   An environment handle returned by mdbx_env_create()
 * [in] dbs   The maximum number of databases
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *  - MDBX_EINVAL   - an invalid parameter was specified,
 *                    or the environment is already open. */
LIBMDBX_API int mdbx_env_set_maxdbs(MDBX_env *env, MDBX_dbi dbs);

/* Get the maximum size of keys and MDBX_DUPSORT data we can write.
 *
 * [in] env  An environment handle returned by mdbx_env_create()
 *
 * Returns The maximum size of a key we can write. */
LIBMDBX_API int mdbx_env_get_maxkeysize(MDBX_env *env);
LIBMDBX_API int mdbx_get_maxkeysize(size_t pagesize);

/* Set application information associated with the MDBX_env.
 *
 * [in] env  An environment handle returned by mdbx_env_create()
 * [in] ctx  An arbitrary pointer for whatever the application needs.
 *
 * Returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_env_set_userctx(MDBX_env *env, void *ctx);

/* Get the application information associated with the MDBX_env.
 *
 * [in] env An environment handle returned by mdbx_env_create()
 * Returns The pointer set by mdbx_env_set_userctx(). */
LIBMDBX_API void *mdbx_env_get_userctx(MDBX_env *env);

/* A callback function for most MDBX assert() failures,
 * called before printing the message and aborting.
 *
 * [in] env  An environment handle returned by mdbx_env_create().
 * [in] msg  The assertion message, not including newline. */
typedef void MDBX_assert_func(const MDBX_env *env, const char *msg,
                              const char *function, unsigned line);

/* Set or reset the assert() callback of the environment.
 *
 * Disabled if libmdbx is buillt with MDBX_DEBUG=0.
 * NOTE: This hack should become obsolete as mdbx's error handling matures.
 *
 * [in] env   An environment handle returned by mdbx_env_create().
 * [in] func  An MDBX_assert_func function, or 0.
 *
 * Returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_env_set_assert(MDBX_env *env, MDBX_assert_func *func);

/* Create a transaction for use with the environment.
 *
 * The transaction handle may be discarded using mdbx_txn_abort()
 * or mdbx_txn_commit().
 * NOTE: A transaction and its cursors must only be used by a single
 * thread, and a thread may only have a single transaction at a time.
 * If MDBX_NOTLS is in use, this does not apply to read-only transactions.
 * NOTE: Cursors may not span transactions.
 *
 * [in] env     An environment handle returned by mdbx_env_create()
 * [in] parent  If this parameter is non-NULL, the new transaction will be
 *              a nested transaction, with the transaction indicated by parent
 *              as its parent. Transactions may be nested to any level.
 *              A parent transaction and its cursors may not issue any other
 *              operations than mdbx_txn_commit and mdbx_txn_abort while it
 *              has active child transactions.
 * [in] flags   Special options for this transaction. This parameter
 *              must be set to 0 or by bitwise OR'ing together one or more
 *              of the values described here.
 *
 *  - MDBX_RDONLY
 *      This transaction will not perform any write operations.
 *
 *  - MDBX_TRYTXN
 *      Do not block when starting a write transaction
 *
 * [out] txn Address where the new MDBX_txn handle will be stored
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *  - MDBX_PANIC         - a fatal error occurred earlier and the environment
 *                        must be shut down.
 *  - MDBX_MAP_RESIZED   - another process wrote data beyond this MDBX_env's
 *                         mapsize and this environment's map must be resized
 *                         as well. See mdbx_env_set_mapsize().
 *  - MDBX_READERS_FULL  - a read-only transaction was requested and the reader
 *                         lock table is full. See mdbx_env_set_maxreaders().
 *  - MDBX_ENOMEM        - out of memory.
 *  - MDBX_BUSY          - a write transaction is already started. */
LIBMDBX_API int mdbx_txn_begin(MDBX_env *env, MDBX_txn *parent, unsigned flags,
                               MDBX_txn **txn);

/* Returns the transaction's MDBX_env
 *
 * [in] txn  A transaction handle returned by mdbx_txn_begin() */
LIBMDBX_API MDBX_env *mdbx_txn_env(MDBX_txn *txn);

/* Return the transaction's flags.
 *
 * This returns the flags associated with this transaction.
 *
 * [in] txn A transaction handle returned by mdbx_txn_begin()
 *
 * Returns A transaction flags, valid if input is an active transaction. */
LIBMDBX_API int mdbx_txn_flags(MDBX_txn *txn);

/* Return the transaction's ID.
 *
 * This returns the identifier associated with this transaction. For a
 * read-only transaction, this corresponds to the snapshot being read;
 * concurrent readers will frequently have the same transaction ID.
 *
 * [in] txn A transaction handle returned by mdbx_txn_begin()
 *
 * Returns A transaction ID, valid if input is an active transaction. */
LIBMDBX_API uint64_t mdbx_txn_id(MDBX_txn *txn);

/* Commit all the operations of a transaction into the database.
 *
 * The transaction handle is freed. It and its cursors must not be used
 * again after this call, except with mdbx_cursor_renew().
 *
 * A cursor must be closed explicitly always, before
 * or after its transaction ends. It can be reused with
 * mdbx_cursor_renew() before finally closing it.
 *
 * [in] txn  A transaction handle returned by mdbx_txn_begin()
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *  - MDBX_EINVAL   - an invalid parameter was specified.
 *  - MDBX_ENOSPC   - no more disk space.
 *  - MDBX_EIO      - a low-level I/O error occurred while writing.
 *  - MDBX_ENOMEM   - out of memory. */
LIBMDBX_API int mdbx_txn_commit(MDBX_txn *txn);

/* Abandon all the operations of the transaction instead of saving them.
 *
 * The transaction handle is freed. It and its cursors must not be used
 * again after this call, except with mdbx_cursor_renew().
 *
 * A cursor must be closed explicitly always, before or after its transaction
 * ends. It can be reused with mdbx_cursor_renew() before finally closing it.
 *
 * [in] txn  A transaction handle returned by mdbx_txn_begin(). */
LIBMDBX_API int mdbx_txn_abort(MDBX_txn *txn);

/* Reset a read-only transaction.
 *
 * Abort the transaction like mdbx_txn_abort(), but keep the transaction
 * handle. Therefore mdbx_txn_renew() may reuse the handle. This saves
 * allocation overhead if the process will start a new read-only transaction
 * soon, and also locking overhead if MDBX_NOTLS is in use. The reader table
 * lock is released, but the table slot stays tied to its thread or
 * MDBX_txn. Use mdbx_txn_abort() to discard a reset handle, and to free
 * its lock table slot if MDBX_NOTLS is in use.
 *
 * Cursors opened within the transaction must not be used
 * again after this call, except with mdbx_cursor_renew().
 *
 * Reader locks generally don't interfere with writers, but they keep old
 * versions of database pages allocated. Thus they prevent the old pages
 * from being reused when writers commit new data, and so under heavy load
 * the database size may grow much more rapidly than otherwise.
 *
 * [in] txn  A transaction handle returned by mdbx_txn_begin() */
LIBMDBX_API int mdbx_txn_reset(MDBX_txn *txn);

/* Renew a read-only transaction.
 *
 * This acquires a new reader lock for a transaction handle that had been
 * released by mdbx_txn_reset(). It must be called before a reset transaction
 * may be used again.
 *
 * [in] txn  A transaction handle returned by mdbx_txn_begin()
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *  - MDBX_PANIC     - a fatal error occurred earlier and the environment
 *                     must be shut down.
 *  - MDBX_EINVAL    - an invalid parameter was specified. */
LIBMDBX_API int mdbx_txn_renew(MDBX_txn *txn);

/* Open a table in the environment.
 *
 * A table handle denotes the name and parameters of a table, independently
 * of whether such a table exists. The table handle may be discarded by
 * calling mdbx_dbi_close(). The old table handle is returned if the table
 * was already open. The handle may only be closed once.
 *
 * The table handle will be private to the current transaction until
 * the transaction is successfully committed. If the transaction is
 * aborted the handle will be closed automatically.
 * After a successful commit the handle will reside in the shared
 * environment, and may be used by other transactions.
 *
 * This function must not be called from multiple concurrent
 * transactions in the same process. A transaction that uses
 * this function must finish (either commit or abort) before
 * any other transaction in the process may use this function.
 *
 * To use named table (with name != NULL), mdbx_env_set_maxdbs()
 * must be called before opening the environment. Table names are
 * keys in the internal unnamed table, and may be read but not written.
 *
 * [in] txn    transaction handle returned by mdbx_txn_begin()
 * [in] name   The name of the table to open. If only a single
 *             table is needed in the environment, this value may be NULL.
 * [in] flags  Special options for this table. This parameter must be set
 *             to 0 or by bitwise OR'ing together one or more of the values
 *             described here:
 *  - MDBX_REVERSEKEY
 *      Keys are strings to be compared in reverse order, from the end
 *      of the strings to the beginning. By default, Keys are treated as
 *      strings and compared from beginning to end.
 *  - MDBX_DUPSORT
 *      Duplicate keys may be used in the table. Or, from another point of
 *      view, keys may have multiple data items, stored in sorted order. By
 *      default keys must be unique and may have only a single data item.
 *  - MDBX_INTEGERKEY
 *      Keys are binary integers in native byte order, either uin32_t or
 *      uint64_t, and will be sorted as such. The keys must all be of the
 *      same size.
 *  - MDBX_DUPFIXED
 *      This flag may only be used in combination with MDBX_DUPSORT. This
 *      option tells the library that the data items for this database are
 *      all the same size, which allows further optimizations in storage and
 *      retrieval. When all data items are the same size, the MDBX_GET_MULTIPLE,
 *      MDBX_NEXT_MULTIPLE and MDBX_PREV_MULTIPLE cursor operations may be used
 *      to retrieve multiple items at once.
 *  - MDBX_INTEGERDUP
 *      This option specifies that duplicate data items are binary integers,
 *      similar to MDBX_INTEGERKEY keys.
 *  - MDBX_REVERSEDUP
 *      This option specifies that duplicate data items should be compared as
 *      strings in reverse order (the comparison is performed in the direction
 *      from the last byte to the first).
 *  - MDBX_CREATE
 *      Create the named database if it doesn't exist. This option is not
 *      allowed in a read-only transaction or a read-only environment.
 *
 * [out]  dbi Address where the new MDBX_dbi handle will be stored
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *  - MDBX_NOTFOUND  - the specified database doesn't exist in the
 *                     environment and MDBX_CREATE was not specified.
 *  - MDBX_DBS_FULL  - too many databases have been opened.
 *                     See mdbx_env_set_maxdbs(). */
LIBMDBX_API int mdbx_dbi_open_ex(MDBX_txn *txn, const char *name,
                                 unsigned flags, MDBX_dbi *dbi,
                                 MDBX_cmp_func *keycmp, MDBX_cmp_func *datacmp);
LIBMDBX_API int mdbx_dbi_open(MDBX_txn *txn, const char *name, unsigned flags,
                              MDBX_dbi *dbi);

/* Retrieve statistics for a database.
 *
 * [in] txn     A transaction handle returned by mdbx_txn_begin()
 * [in] dbi     A database handle returned by mdbx_dbi_open()
 * [out] stat   The address of an MDBX_stat structure where the statistics
 *              will be copied
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *  - MDBX_EINVAL   - an invalid parameter was specified. */
LIBMDBX_API int mdbx_dbi_stat(MDBX_txn *txn, MDBX_dbi dbi, MDBX_stat *stat,
                              size_t bytes);

/* Retrieve the DB flags for a database handle.
 *
 * [in] txn     A transaction handle returned by mdbx_txn_begin()
 * [in] dbi     A database handle returned by mdbx_dbi_open()
 * [out] flags  Address where the flags will be returned.
 * [out] state  Address where the state will be returned.
 *
 * Returns A non-zero error value on failure and 0 on success. */
#define MDBX_TBL_DIRTY 0x01 /* DB was written in this txn */
#define MDBX_TBL_STALE 0x02 /* Named-DB record is older than txnID */
#define MDBX_TBL_FRESH 0x04 /* Named-DB handle opened in this txn */
#define MDBX_TBL_CREAT 0x08 /* Named-DB handle created in this txn */
LIBMDBX_API int mdbx_dbi_flags_ex(MDBX_txn *txn, MDBX_dbi dbi, unsigned *flags,
                                  unsigned *state);
LIBMDBX_API int mdbx_dbi_flags(MDBX_txn *txn, MDBX_dbi dbi, unsigned *flags);

/* Close a database handle. Normally unnecessary.
 *
 * Use with care:
 * FIXME: This call is not mutex protected. Handles should only be closed by
 * a single thread, and only if no other threads are going to reference
 * the database handle or one of its cursors any further. Do not close
 * a handle if an existing transaction has modified its database.
 * Doing so can cause misbehavior from database corruption to errors
 * like MDBX_BAD_VALSIZE (since the DB name is gone).
 *
 * Closing a database handle is not necessary, but lets mdbx_dbi_open()
 * reuse the handle value.  Usually it's better to set a bigger
 * mdbx_env_set_maxdbs(), unless that value would be large.
 *
 * [in] env  An environment handle returned by mdbx_env_create()
 * [in] dbi  A database handle returned by mdbx_dbi_open()
 */
LIBMDBX_API int mdbx_dbi_close(MDBX_env *env, MDBX_dbi dbi);

/* Empty or delete+close a database.
 *
 * See mdbx_dbi_close() for restrictions about closing the DB handle.
 *
 * [in] txn  A transaction handle returned by mdbx_txn_begin()
 * [in] dbi  A database handle returned by mdbx_dbi_open()
 * [in] del  0 to empty the DB, 1 to delete it from the environment
 *           and close the DB handle.
 *
 * Returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_drop(MDBX_txn *txn, MDBX_dbi dbi, int del);

/* Get items from a database.
 *
 * This function retrieves key/data pairs from the database. The address
 * and length of the data associated with the specified key are returned
 * in the structure to which data refers.
 * If the database supports duplicate keys (MDBX_DUPSORT) then the
 * first data item for the key will be returned. Retrieval of other
 * items requires the use of mdbx_cursor_get().
 *
 * NOTE: The memory pointed to by the returned values is owned by the
 * database. The caller need not dispose of the memory, and may not
 * modify it in any way. For values returned in a read-only transaction
 * any modification attempts will cause a SIGSEGV.
 *
 * NOTE: Values returned from the database are valid only until a
 * subsequent update operation, or the end of the transaction.
 *
 * [in] txn       A transaction handle returned by mdbx_txn_begin()
 * [in] dbi       A database handle returned by mdbx_dbi_open()
 * [in] key       The key to search for in the database
 * [in,out] data  The data corresponding to the key
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *  - MDBX_NOTFOUND  - the key was not in the database.
 *  - MDBX_EINVAL   - an invalid parameter was specified. */
LIBMDBX_API int mdbx_get(MDBX_txn *txn, MDBX_dbi dbi, MDBX_val *key,
                         MDBX_val *data);

/* Store items into a database.
 *
 * This function stores key/data pairs in the database. The default behavior
 * is to enter the new key/data pair, replacing any previously existing key
 * if duplicates are disallowed, or adding a duplicate data item if
 * duplicates are allowed (MDBX_DUPSORT).
 *
 * [in] txn    A transaction handle returned by mdbx_txn_begin()
 * [in] dbi    A database handle returned by mdbx_dbi_open()
 * [in] key    The key to store in the database
 * [in,out]    data The data to store
 * [in] flags  Special options for this operation. This parameter must be
 *             set to 0 or by bitwise OR'ing together one or more of the
 *             values described here.
 *
 *  - MDBX_NODUPDATA
 *      Enter the new key/data pair only if it does not already appear
 *      in the database. This flag may only be specified if the database
 *      was opened with MDBX_DUPSORT. The function will return MDBX_KEYEXIST
 *      if the key/data pair already appears in the database.
 *
 *  - MDBX_NOOVERWRITE
 *      Enter the new key/data pair only if the key does not already appear
 *      in the database. The function will return MDBX_KEYEXIST if the key
 *      already appears in the database, even if the database supports
 *      duplicates (MDBX_DUPSORT). The data parameter will be set to point
 *      to the existing item.
 *
 *  - MDBX_CURRENT
 *      Update an single existing entry, but not add new ones. The function
 *      will return MDBX_NOTFOUND if the given key not exist in the database.
 *      Or the MDBX_EMULTIVAL in case duplicates for the given key.
 *
 *  - MDBX_RESERVE
 *      Reserve space for data of the given size, but don't copy the given
 *      data. Instead, return a pointer to the reserved space, which the
 *      caller can fill in later - before the next update operation or the
 *      transaction ends. This saves an extra memcpy if the data is being
 *      generated later. MDBX does nothing else with this memory, the caller
 *      is expected to modify all of the space requested. This flag must not
 *      be specified if the database was opened with MDBX_DUPSORT.
 *
 *  - MDBX_APPEND
 *      Append the given key/data pair to the end of the database. This option
 *      allows fast bulk loading when keys are already known to be in the
 *      correct order. Loading unsorted keys with this flag will cause
 *      a MDBX_EKEYMISMATCH error.
 *
 *  - MDBX_APPENDDUP
 *      As above, but for sorted dup data.
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *  - MDBX_KEYEXIST
 *  - MDBX_MAP_FULL  - the database is full, see mdbx_env_set_mapsize().
 *  - MDBX_TXN_FULL  - the transaction has too many dirty pages.
 *  - MDBX_EACCES    - an attempt was made to write in a read-only transaction.
 *  - MDBX_EINVAL    - an invalid parameter was specified. */
LIBMDBX_API int mdbx_put(MDBX_txn *txn, MDBX_dbi dbi, MDBX_val *key,
                         MDBX_val *data, unsigned flags);

/* Delete items from a database.
 *
 * This function removes key/data pairs from the database.
 *
 * The data parameter is NOT ignored regardless the database does
 * support sorted duplicate data items or not. If the data parameter
 * is non-NULL only the matching data item will be deleted.
 *
 * This function will return MDBX_NOTFOUND if the specified key/data
 * pair is not in the database.
 *
 * [in] txn   A transaction handle returned by mdbx_txn_begin()
 * [in] dbi   A database handle returned by mdbx_dbi_open()
 * [in] key   The key to delete from the database
 * [in] data  The data to delete
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *  - MDBX_EACCES   - an attempt was made to write in a read-only transaction.
 *  - MDBX_EINVAL   - an invalid parameter was specified. */
LIBMDBX_API int mdbx_del(MDBX_txn *txn, MDBX_dbi dbi, MDBX_val *key,
                         MDBX_val *data);

/* Create a cursor handle.
 *
 * A cursor is associated with a specific transaction and database.
 * A cursor cannot be used when its database handle is closed.  Nor
 * when its transaction has ended, except with mdbx_cursor_renew().
 * It can be discarded with mdbx_cursor_close().
 *
 * A cursor must be closed explicitly always, before
 * or after its transaction ends. It can be reused with
 * mdbx_cursor_renew() before finally closing it.
 *
 * [in] txn      A transaction handle returned by mdbx_txn_begin()
 * [in] dbi      A database handle returned by mdbx_dbi_open()
 * [out] cursor  Address where the new MDBX_cursor handle will be stored
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *  - MDBX_EINVAL   - an invalid parameter was specified. */
LIBMDBX_API int mdbx_cursor_open(MDBX_txn *txn, MDBX_dbi dbi,
                                 MDBX_cursor **cursor);

/* Close a cursor handle.
 *
 * The cursor handle will be freed and must not be used again after this call.
 * Its transaction must still be live if it is a write-transaction.
 *
 * [in] cursor  A cursor handle returned by mdbx_cursor_open() */
LIBMDBX_API void mdbx_cursor_close(MDBX_cursor *cursor);

/* Renew a cursor handle.
 *
 * A cursor is associated with a specific transaction and database.
 * Cursors that are only used in read-only transactions may be re-used,
 * to avoid unnecessary malloc/free overhead. The cursor may be associated
 * with a new read-only transaction, and referencing the same database handle
 * as it was created with.
 *
 * This may be done whether the previous transaction is live or dead.
 * [in] txn     A transaction handle returned by mdbx_txn_begin()
 * [in] cursor  A cursor handle returned by mdbx_cursor_open()
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *  - MDBX_EINVAL   - an invalid parameter was specified. */
LIBMDBX_API int mdbx_cursor_renew(MDBX_txn *txn, MDBX_cursor *cursor);

/* Return the cursor's transaction handle.
 *
 * [in] cursor A cursor handle returned by mdbx_cursor_open() */
LIBMDBX_API MDBX_txn *mdbx_cursor_txn(MDBX_cursor *cursor);

/* Return the cursor's database handle.
 *
 * [in] cursor  A cursor handle returned by mdbx_cursor_open() */
LIBMDBX_API MDBX_dbi mdbx_cursor_dbi(MDBX_cursor *cursor);

/* Retrieve by cursor.
 *
 * This function retrieves key/data pairs from the database. The address and
 * length of the key are returned in the object to which key refers (except
 * for the case of the MDBX_SET option, in which the key object is unchanged),
 * and the address and length of the data are returned in the object to which
 * data refers. See mdbx_get() for restrictions on using the output values.
 *
 * [in] cursor    A cursor handle returned by mdbx_cursor_open()
 * [in,out] key   The key for a retrieved item
 * [in,out] data  The data of a retrieved item
 * [in] op        A cursor operation MDBX_cursor_op
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *  - MDBX_NOTFOUND  - no matching key found.
 *  - MDBX_EINVAL    - an invalid parameter was specified. */
LIBMDBX_API int mdbx_cursor_get(MDBX_cursor *cursor, MDBX_val *key,
                                MDBX_val *data, MDBX_cursor_op op);

/* Store by cursor.
 *
 * This function stores key/data pairs into the database. The cursor is
 * positioned at the new item, or on failure usually near it.
 *
 * [in] cursor  A cursor handle returned by mdbx_cursor_open()
 * [in] key     The key operated on.
 * [in] data    The data operated on.
 * [in] flags   Options for this operation. This parameter
 *              must be set to 0 or one of the values described here:
 *
 *  - MDBX_CURRENT
 *      Replace the item at the current cursor position. The key parameter
 *      must still be provided, and must match it, otherwise the function
 *      return MDBX_EKEYMISMATCH.
 *
 *      NOTE: MDBX unlike LMDB allows you to change the size of the data and
 *      automatically handles reordering for sorted duplicates (MDBX_DUPSORT).
 *
 *  - MDBX_NODUPDATA
 *      Enter the new key/data pair only if it does not already appear in the
 *      database. This flag may only be specified if the database was opened
 *      with MDBX_DUPSORT. The function will return MDBX_KEYEXIST if the
 *      key/data pair already appears in the database.
 *
 *  - MDBX_NOOVERWRITE
 *      Enter the new key/data pair only if the key does not already appear
 *      in the database. The function will return MDBX_KEYEXIST if the key
 *      already appears in the database, even if the database supports
 *      duplicates (MDBX_DUPSORT).
 *
 *  - MDBX_RESERVE
 *      Reserve space for data of the given size, but don't copy the given
 *      data. Instead, return a pointer to the reserved space, which the
 *      caller can fill in later - before the next update operation or the
 *      transaction ends. This saves an extra memcpy if the data is being
 *      generated later. This flag must not be specified if the database
 *      was opened with MDBX_DUPSORT.
 *
 *  - MDBX_APPEND
 *      Append the given key/data pair to the end of the database. No key
 *      comparisons are performed. This option allows fast bulk loading when
 *      keys are already known to be in the correct order. Loading unsorted
 *      keys with this flag will cause a MDBX_KEYEXIST error.
 *
 *  - MDBX_APPENDDUP
 *      As above, but for sorted dup data.
 *
 *  - MDBX_MULTIPLE
 *      Store multiple contiguous data elements in a single request. This flag
 *      may only be specified if the database was opened with MDBX_DUPFIXED.
 *      The data argument must be an array of two MDBX_vals. The iov_len of the
 *      first MDBX_val must be the size of a single data element. The iov_base
 *      of the first MDBX_val must point to the beginning of the array of
 *      contiguous data elements. The iov_len of the second MDBX_val must be
 *      the count of the number of data elements to store. On return this
 *      field will be set to the count of the number of elements actually
 *      written. The iov_base of the second MDBX_val is unused.
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *  - MDBX_EKEYMISMATCH
 *  - MDBX_MAP_FULL  - the database is full, see mdbx_env_set_mapsize().
 *  - MDBX_TXN_FULL  - the transaction has too many dirty pages.
 *  - MDBX_EACCES    - an attempt was made to write in a read-only transaction.
 *  - MDBX_EINVAL    - an invalid parameter was specified. */
LIBMDBX_API int mdbx_cursor_put(MDBX_cursor *cursor, MDBX_val *key,
                                MDBX_val *data, unsigned flags);

/* Delete current key/data pair
 *
 * This function deletes the key/data pair to which the cursor refers.
 *
 * [in] cursor  A cursor handle returned by mdbx_cursor_open()
 * [in] flags   Options for this operation. This parameter must be set to 0
 *              or one of the values described here.
 *
 *  - MDBX_NODUPDATA
 *      Delete all of the data items for the current key. This flag may only
 *      be specified if the database was opened with MDBX_DUPSORT.
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *  - MDBX_EACCES  - an attempt was made to write in a read-only transaction.
 *  - MDBX_EINVAL  - an invalid parameter was specified. */
LIBMDBX_API int mdbx_cursor_del(MDBX_cursor *cursor, unsigned flags);

/* Return count of duplicates for current key.
 *
 * This call is only valid on databases that support sorted duplicate data
 * items MDBX_DUPSORT.
 *
 * [in] cursor    A cursor handle returned by mdbx_cursor_open()
 * [out] countp   Address where the count will be stored
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *  - MDBX_EINVAL   - cursor is not initialized, or an invalid parameter
 *                    was specified. */
LIBMDBX_API int mdbx_cursor_count(MDBX_cursor *cursor, size_t *countp);

/* Compare two data items according to a particular database.
 *
 * This returns a comparison as if the two data items were keys in the
 * specified database.
 *
 * [in] txn   A transaction handle returned by mdbx_txn_begin()
 * [in] dbi   A database handle returned by mdbx_dbi_open()
 * [in] a     The first item to compare
 * [in] b     The second item to compare
 *
 * Returns < 0 if a < b, 0 if a == b, > 0 if a > b */
LIBMDBX_API int mdbx_cmp(MDBX_txn *txn, MDBX_dbi dbi, const MDBX_val *a,
                         const MDBX_val *b);

/* Compare two data items according to a particular database.
 *
 * This returns a comparison as if the two items were data items of
 * the specified database. The database must have the MDBX_DUPSORT flag.
 *
 * [in] txn   A transaction handle returned by mdbx_txn_begin()
 * [in] dbi   A database handle returned by mdbx_dbi_open()
 * [in] a     The first item to compare
 * [in] b     The second item to compare
 *
 * Returns < 0 if a < b, 0 if a == b, > 0 if a > b */
LIBMDBX_API int mdbx_dcmp(MDBX_txn *txn, MDBX_dbi dbi, const MDBX_val *a,
                          const MDBX_val *b);

/* A callback function used to print a message from the library.
 *
 * [in] msg   The string to be printed.
 * [in] ctx   An arbitrary context pointer for the callback.
 *
 * Returns < 0 on failure, >= 0 on success. */
typedef int(MDBX_msg_func)(const char *msg, void *ctx);

/* Dump the entries in the reader lock table.
 *
 * [in] env   An environment handle returned by mdbx_env_create()
 * [in] func  A MDBX_msg_func function
 * [in] ctx   Anything the message function needs
 *
 * Returns < 0 on failure, >= 0 on success. */
LIBMDBX_API int mdbx_reader_list(MDBX_env *env, MDBX_msg_func *func, void *ctx);

/* Check for stale entries in the reader lock table.
 *
 * [in] env     An environment handle returned by mdbx_env_create()
 * [out] dead   Number of stale slots that were cleared
 *
 * Returns 0 on success, non-zero on failure. */
LIBMDBX_API int mdbx_reader_check(MDBX_env *env, int *dead);

LIBMDBX_API char *mdbx_dkey(const MDBX_val *key, char *const buf,
                            const size_t bufsize);

LIBMDBX_API int mdbx_env_close_ex(MDBX_env *env, int dont_sync);

/* Set threshold to force flush the data buffers to disk,
 * even of MDBX_NOSYNC, MDBX_NOMETASYNC and MDBX_MAPASYNC flags
 * in the environment.
 *
 * Data is always written to disk when mdbx_txn_commit() is called,
 * but the operating system may keep it buffered. MDBX always flushes
 * the OS buffers upon commit as well, unless the environment was
 * opened with MDBX_NOSYNC or in part MDBX_NOMETASYNC.
 *
 * The default is 0, than mean no any threshold checked, and no additional
 * flush will be made.
 *
 * [in] env     An environment handle returned by mdbx_env_create()
 * [in] bytes   The size in bytes of summary changes when a synchronous
 *              flush would be made.
 *
 * Returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_env_set_syncbytes(MDBX_env *env, size_t bytes);

/* Returns a lag of the reading for the given transaction.
 *
 * Returns an information for estimate how much given read-only
 * transaction is lagging relative the to actual head.
 *
 * [in] txn       A transaction handle returned by mdbx_txn_begin()
 * [out] percent  Percentage of page allocation in the database.
 *
 * Returns Number of transactions committed after the given was started for
 * read, or -1 on failure. */
LIBMDBX_API int mdbx_txn_straggler(MDBX_txn *txn, int *percent);

/* A callback function for killing a laggard readers,
 * but also could waiting ones. Called in case of MDBX_MAP_FULL error.
 *
 * [in] env     An environment handle returned by mdbx_env_create().
 * [in] pid     pid of the reader process.
 * [in] tid     thread_id of the reader thread.
 * [in] txn     Transaction number on which stalled.
 * [in] gap     A lag from the last commited txn.
 * [in] retry   A retry number, less that zero for notify end of OOM-loop.
 *
 * Returns -1 on failure (reader is not killed),
 *  0 should wait or retry,
 *  1 drop reader txn-lock (reading-txn was aborted),
 *  >1 drop reader registration (reader process was killed). */
typedef int(MDBX_oom_func)(MDBX_env *env, int pid, mdbx_tid_t tid, uint64_t txn,
                           unsigned gap, int retry);

/* Set the OOM callback.
 *
 * Callback will be called only on out-of-pages case for killing
 * a laggard readers to allowing reclaiming of freeDB.
 *
 * [in] env       An environment handle returned by mdbx_env_create().
 * [in] oomfunc   A MDBX_oom_func function or NULL to disable.
 *
 * Returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_env_set_oomfunc(MDBX_env *env, MDBX_oom_func *oom_func);

/* Get the current oom_func callback.
 *
 * Callback will be called only on out-of-pages case for killing
 * a laggard readers to allowing reclaiming of freeDB.
 *
 * [in] env   An environment handle returned by mdbx_env_create().
 *
 * Returns A MDBX_oom_func function or NULL if disabled. */
LIBMDBX_API MDBX_oom_func *mdbx_env_get_oomfunc(MDBX_env *env);

#define MDBX_DBG_ASSERT 1
#define MDBX_DBG_PRINT 2
#define MDBX_DBG_TRACE 4
#define MDBX_DBG_EXTRA 8
#define MDBX_DBG_AUDIT 16
#define MDBX_DBG_JITTER 32
#define MDBX_DBG_DUMP 64

typedef void MDBX_debug_func(int type, const char *function, int line,
                             const char *msg, va_list args);

LIBMDBX_API int mdbx_setup_debug(int flags, MDBX_debug_func *logger);

typedef int MDBX_pgvisitor_func(uint64_t pgno, unsigned pgnumber, void *ctx,
                                const char *dbi, const char *type,
                                size_t nentries, size_t payload_bytes,
                                size_t header_bytes, size_t unused_bytes);
LIBMDBX_API int mdbx_env_pgwalk(MDBX_txn *txn, MDBX_pgvisitor_func *visitor,
                                void *ctx);

typedef struct mdbx_canary {
  uint64_t x, y, z, v;
} mdbx_canary;

LIBMDBX_API int mdbx_canary_put(MDBX_txn *txn, const mdbx_canary *canary);
LIBMDBX_API int mdbx_canary_get(MDBX_txn *txn, mdbx_canary *canary);

/* Returns:
 *  - MDBX_RESULT_TRUE
 *      when no more data available or cursor not positioned;
 *  - MDBX_RESULT_FALSE
 *      when data available;
 *  - Otherwise the error code. */
LIBMDBX_API int mdbx_cursor_eof(MDBX_cursor *mc);

/* Returns: MDBX_RESULT_TRUE, MDBX_RESULT_FALSE or Error code. */
LIBMDBX_API int mdbx_cursor_on_first(MDBX_cursor *mc);

/* Returns: MDBX_RESULT_TRUE, MDBX_RESULT_FALSE or Error code. */
LIBMDBX_API int mdbx_cursor_on_last(MDBX_cursor *mc);

LIBMDBX_API int mdbx_replace(MDBX_txn *txn, MDBX_dbi dbi, MDBX_val *key,
                             MDBX_val *new_data, MDBX_val *old_data,
                             unsigned flags);
/* Same as mdbx_get(), but:
 * 1) if values_count is not NULL, then returns the count
 *    of multi-values/duplicates for a given key.
 * 2) updates the key for pointing to the actual key's data inside DB. */
LIBMDBX_API int mdbx_get_ex(MDBX_txn *txn, MDBX_dbi dbi, MDBX_val *key,
                            MDBX_val *data, size_t *values_count);

LIBMDBX_API int mdbx_is_dirty(const MDBX_txn *txn, const void *ptr);

LIBMDBX_API int mdbx_dbi_sequence(MDBX_txn *txn, MDBX_dbi dbi, uint64_t *result,
                                  uint64_t increment);

/*----------------------------------------------------------------------------*/
/* attribute support functions for Nexenta */
typedef uint_fast64_t mdbx_attr_t;

/* Store by cursor with attribute.
 *
 * This function stores key/data pairs into the database. The cursor is
 * positioned at the new item, or on failure usually near it.
 *
 * NOTE: Internally based on MDBX_RESERVE feature,
 *       therefore doesn't support MDBX_DUPSORT.
 *
 * [in] cursor  A cursor handle returned by mdbx_cursor_open()
 * [in] key     The key operated on.
 * [in] data    The data operated on.
 * [in] attr    The attribute.
 * [in] flags   Options for this operation. This parameter must be set to 0
 *              or one of the values described here:
 *
 *	- MDBX_CURRENT
 *      Replace the item at the current cursor position. The key parameter
 *      must still be provided, and must match it, otherwise the function
 *      return MDBX_EKEYMISMATCH.
 *
 *  - MDBX_APPEND
 *      Append the given key/data pair to the end of the database. No key
 *      comparisons are performed. This option allows fast bulk loading when
 *      keys are already known to be in the correct order. Loading unsorted
 *      keys with this flag will cause a MDBX_KEYEXIST error.
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *  - MDBX_EKEYMISMATCH
 *  - MDBX_MAP_FULL  - the database is full, see mdbx_env_set_mapsize().
 *  - MDBX_TXN_FULL  - the transaction has too many dirty pages.
 *  - MDBX_EACCES    - an attempt was made to write in a read-only transaction.
 *  - MDBX_EINVAL    - an invalid parameter was specified. */
LIBMDBX_API int mdbx_cursor_put_attr(MDBX_cursor *cursor, MDBX_val *key,
                                     MDBX_val *data, mdbx_attr_t attr,
                                     unsigned flags);

/* Store items and attributes into a database.
 *
 * This function stores key/data pairs in the database. The default behavior
 * is to enter the new key/data pair, replacing any previously existing key
 * if duplicates are disallowed.
 *
 * NOTE: Internally based on MDBX_RESERVE feature,
 *       therefore doesn't support MDBX_DUPSORT.
 *
 * [in] txn       A transaction handle returned by mdbx_txn_begin().
 * [in] dbi       A database handle returned by mdbx_dbi_open().
 * [in] key       The key to store in the database.
 * [in] attr      The attribute to store in the database.
 * [in,out] data  The data to store.
 * [in] flags     Special options for this operation. This parameter must be
 *                set to 0 or by bitwise OR'ing together one or more of the
 *                values described here:
 *
 *  - MDBX_NOOVERWRITE
 *      Enter the new key/data pair only if the key does not already appear
 *      in the database. The function will return MDBX_KEYEXIST if the key
 *      already appears in the database. The data parameter will be set to
 *      point to the existing item.
 *
 *  - MDBX_CURRENT
 *      Update an single existing entry, but not add new ones. The function
 *      will return MDBX_NOTFOUND if the given key not exist in the database.
 *      Or the MDBX_EMULTIVAL in case duplicates for the given key.
 *
 *  - MDBX_APPEND
 *      Append the given key/data pair to the end of the database. This option
 *      allows fast bulk loading when keys are already known to be in the
 *      correct order. Loading unsorted keys with this flag will cause
 *      a MDBX_EKEYMISMATCH error.
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *  - MDBX_KEYEXIST
 *  - MDBX_MAP_FULL  - the database is full, see mdbx_env_set_mapsize().
 *  - MDBX_TXN_FULL  - the transaction has too many dirty pages.
 *  - MDBX_EACCES    - an attempt was made to write in a read-only transaction.
 *  - MDBX_EINVAL    - an invalid parameter was specified. */
LIBMDBX_API int mdbx_put_attr(MDBX_txn *txn, MDBX_dbi dbi, MDBX_val *key,
                              MDBX_val *data, mdbx_attr_t attr, unsigned flags);

/* Set items attribute from a database.
 *
 * This function stores key/data pairs attribute to the database.
 *
 * NOTE: Internally based on MDBX_RESERVE feature,
 *       therefore doesn't support MDBX_DUPSORT.
 *
 * [in] txn   A transaction handle returned by mdbx_txn_begin().
 * [in] dbi   A database handle returned by mdbx_dbi_open().
 * [in] key   The key to search for in the database.
 * [in] data  The data to be stored or NULL to save previous value.
 * [in] attr  The attribute to be stored.
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *	 - MDBX_NOTFOUND   - the key-value pair was not in the database.
 *	 - MDBX_EINVAL     - an invalid parameter was specified. */
LIBMDBX_API int mdbx_set_attr(MDBX_txn *txn, MDBX_dbi dbi, MDBX_val *key,
                              MDBX_val *data, mdbx_attr_t attr);

/* Get items attribute from a database cursor.
 *
 * This function retrieves key/data pairs from the database. The address and
 * length of the key are returned in the object to which key refers (except
 * for the case of the MDBX_SET option, in which the key object is unchanged),
 * and the address and length of the data are returned in the object to which
 * data refers. See mdbx_get() for restrictions on using the output values.
 *
 * [in] cursor    A cursor handle returned by mdbx_cursor_open()
 * [in,out] key   The key for a retrieved item
 * [in,out] data  The data of a retrieved item
 * [in] op        A cursor operation MDBX_cursor_op
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *  - MDBX_NOTFOUND  - no matching key found.
 *  - MDBX_EINVAL    - an invalid parameter was specified. */
LIBMDBX_API int mdbx_cursor_get_attr(MDBX_cursor *mc, MDBX_val *key,
                                     MDBX_val *data, mdbx_attr_t *attrptr,
                                     MDBX_cursor_op op);

/* Get items attribute from a database.
 *
 * This function retrieves key/data pairs from the database. The address
 * and length of the data associated with the specified key are returned
 * in the structure to which data refers.
 * If the database supports duplicate keys (MDBX_DUPSORT) then the
 * first data item for the key will be returned. Retrieval of other
 * items requires the use of mdbx_cursor_get().
 *
 * NOTE: The memory pointed to by the returned values is owned by the
 * database. The caller need not dispose of the memory, and may not
 * modify it in any way. For values returned in a read-only transaction
 * any modification attempts will cause a SIGSEGV.
 *
 * NOTE: Values returned from the database are valid only until a
 * subsequent update operation, or the end of the transaction.
 *
 * [in] txn       A transaction handle returned by mdbx_txn_begin()
 * [in] dbi       A database handle returned by mdbx_dbi_open()
 * [in] key       The key to search for in the database
 * [in,out] data  The data corresponding to the key
 *
 * Returns A non-zero error value on failure and 0 on success, some
 * possible errors are:
 *  - MDBX_NOTFOUND  - the key was not in the database.
 *  - MDBX_EINVAL   - an invalid parameter was specified. */
LIBMDBX_API int mdbx_get_attr(MDBX_txn *txn, MDBX_dbi dbi, MDBX_val *key,
                              MDBX_val *data, mdbx_attr_t *attrptr);

/*----------------------------------------------------------------------------*/
/* LY: temporary workaround for Elbrus's memcmp() bug. */
#ifndef __GLIBC_PREREQ
#if defined(__GLIBC__) && defined(__GLIBC_MINOR__)
#define __GLIBC_PREREQ(maj, min)                                               \
  ((__GLIBC__ << 16) + __GLIBC_MINOR__ >= ((maj) << 16) + (min))
#else
#define __GLIBC_PREREQ(maj, min) (0)
#endif
#endif /* __GLIBC_PREREQ */
#if defined(__e2k__) && !__GLIBC_PREREQ(2, 24)
LIBMDBX_API int mdbx_e2k_memcmp_bug_workaround(const void *s1, const void *s2,
                                               size_t n);
LIBMDBX_API int mdbx_e2k_strcmp_bug_workaround(const char *s1, const char *s2);
LIBMDBX_API int mdbx_e2k_strncmp_bug_workaround(const char *s1, const char *s2,
                                                size_t n);
LIBMDBX_API size_t mdbx_e2k_strlen_bug_workaround(const char *s);
LIBMDBX_API size_t mdbx_e2k_strnlen_bug_workaround(const char *s,
                                                   size_t maxlen);
#include <string.h>
#include <strings.h>
#undef memcmp
#define memcmp mdbx_e2k_memcmp_bug_workaround
#undef bcmp
#define bcmp mdbx_e2k_memcmp_bug_workaround
#undef strcmp
#define strcmp mdbx_e2k_strcmp_bug_workaround
#undef strncmp
#define strncmp mdbx_e2k_strncmp_bug_workaround
#undef strlen
#define strlen mdbx_e2k_strlen_bug_workaround
#undef strnlen
#define strnlen mdbx_e2k_strnlen_bug_workaround

#endif /* Elbrus's memcmp() bug. */

#ifdef __cplusplus
}
#endif

#endif /* LIBMDBX_H */