diff options
| -rw-r--r-- | sys-apps/hal/hal-0.5.9999.ebuild | 313 | ||||
| -rw-r--r-- | sys-apps/util-linux/util-linux-9999.ebuild | 70 |
2 files changed, 0 insertions, 383 deletions
diff --git a/sys-apps/hal/hal-0.5.9999.ebuild b/sys-apps/hal/hal-0.5.9999.ebuild deleted file mode 100644 index 7b34184..0000000 --- a/sys-apps/hal/hal-0.5.9999.ebuild +++ /dev/null @@ -1,313 +0,0 @@ -# Copyright 1999-2009 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-apps/hal/hal-0.5.11-r6.ebuild,v 1.4 2009/01/21 22:18:36 aballier Exp $ - -inherit eutils linux-info autotools flag-o-matic git - -PATCH_VERSION="3" - -DESCRIPTION="Hardware Abstraction Layer" -HOMEPAGE="http://www.freedesktop.org/Software/hal" -SRC_URI="" - -EGIT_REPO_URI="git://git.freedesktop.org/git/hal" -#EGIT_BOOTSTRAP="./autogen.sh" - - -LICENSE="|| ( GPL-2 AFL-2.0 )" -SLOT="" -KEYWORDS="" - -KERNEL_IUSE="kernel_linux kernel_FreeBSD" -IUSE="X acpi apm crypt debug dell disk-partition doc laptop selinux ${KERNEL_IUSE}" - -RDEPEND=">=dev-libs/dbus-glib-0.61 - >=dev-libs/glib-2.14 - >=dev-libs/expat-1.95.8 - >=dev-libs/libusb-0.1.10a - >=sys-apps/pciutils-2.2.7-r1 - >=dev-util/gperf-3.0.3 - sys-apps/usbutils - virtual/eject - amd64? ( >=sys-apps/dmidecode-2.7 ) - dell? ( >=sys-libs/libsmbios-0.13.4 ) - disk-partition? ( >=sys-apps/parted-1.8.0 ) - ia64? ( >=sys-apps/dmidecode-2.7 ) - kernel_linux? ( - >=sys-fs/udev-117 - >=sys-apps/util-linux-2.13 - >=sys-kernel/linux-headers-2.6.19 - crypt? ( >=sys-fs/cryptsetup-1.0.5 ) - ) - kernel_FreeBSD? ( >=dev-libs/libvolume_id-0.77 ) - x86? ( >=sys-apps/dmidecode-2.7 ) - selinux? ( sys-libs/libselinux sec-policy/selinux-hal )" -DEPEND="${RDEPEND} - dev-util/pkgconfig - >=dev-util/intltool-0.35 - doc? ( - app-text/xmlto - dev-libs/libxml2 - dev-util/gtk-doc - app-text/docbook-sgml-utils - )" -PDEPEND="|| ( - app-misc/hal-info - ) - !gnome-extra/hal-device-manager - laptop? ( >=sys-power/pm-utils-0.99.3 )" - -## HAL Daemon drops privledges so we need group access to read disks -HALDAEMON_GROUPS_LINUX="haldaemon,plugdev,disk,cdrom,cdrw,floppy,usb" -HALDAEMON_GROUPS_FREEBSD="haldaemon,plugdev,operator" - -function check_hotplug_net() { - local CONFIG_CHECK="~HOTPLUG ~NET" - local WARNING_HOTPLUG="CONFIG_HOTPLUG:\tis not set (required for HAL)\n" - local WARNING_NET="CONFIG_NET:\tis not set (required for HAL)\n" - check_extra_config -} - -function check_inotify() { - local CONFIG_CHECK="~INOTIFY_USER" - local WARNING_INOTIFY_USER="CONFIG_INOTIFY_USER:\tis not set (required for HAL)\n" - check_extra_config -} - -function check_acpi_proc() { - local CONFIG_CHECK="~ACPI_PROCFS ~ACPI_PROC_EVENT" - local WARNING_ACPI_PROCFS="CONFIG_ACPI_PROCFS:\tis not set (required for HAL)\n" - local WARNING_ACPI_PROC_EVENT="CONFIG_ACPI_PROC_EVENT:\tis not set (required for HAL)\n" - check_extra_config -} - -pkg_setup() { - if use kernel_linux ; then - if [[ -e "${ROOT}/usr/src/linux/.config" ]] ; then - kernel_is ge 2 6 19 || ewarn "HAL requires a kernel version 2.6.19 or newer" - - if kernel_is lt 2 6 23 && use acpi ; then - check_acpi_proc - fi - fi - - check_hotplug_net - check_inotify - fi - - # http://devmanual.gentoo.org/ebuild-writing/functions/ - # http://bugs.gentoo.org/show_bug.cgi?id=191605 - - # Create groups for hotplugging and HAL - enewgroup haldaemon - enewgroup plugdev - - # HAL drops priviledges by default now ... - # ... so we must make sure it can read disk/cdrom info (ie. be in ${HALDAEMON_GROUPS} groups) - if use kernel_linux; then - enewuser haldaemon -1 "-1" /dev/null ${HALDAEMON_GROUPS_LINUX} - elif use kernel_FreeBSD; then - enewuser haldaemon -1 "-1" /dev/null ${HALDAEMON_GROUPS_FREEBSD} - fi - - # Make sure that the haldaemon user is in the ${HALDAEMON_GROUPS} - # If users have a problem with this, let them file a bug - if [[ ${ROOT} == / ]] ; then - if use kernel_linux; then - usermod -G ${HALDAEMON_GROUPS_LINUX} haldaemon - elif use kernel_FreeBSD; then - pw usermod haldaemon -G ${HALDAEMON_GROUPS_FREEBSD} - fi - fi -} - -S="${WORKDIR}/${PF/-r*/}" - -src_unpack() { - git_src_unpack - cd "${S}" - -# EPATCH_MULTI_MSG="Applying Gentoo Patchset ..." \ -# EPATCH_SUFFIX="patch" \ -# EPATCH_SOURCE="${WORKDIR}/hal-0.5.11-patches/" \ -# EPATCH_FORCE="yes" \ -# epatch - -# epatch "${FILESDIR}"/hal-0.5.11-ppc64.patch - - eautoreconf -} - -src_compile() { - local acpi="$(use_enable acpi)" - local backend= - local hardware= - - append-flags -rdynamic - - if use kernel_linux ; then - backend="linux" - elif use kernel_FreeBSD ; then - backend="freebsd" - else - eerror "Invalid backend" - fi - - if use kernel_linux ; then - if use acpi ; then - # Using IBM ACPI and Toshiba ACPI results in double notification as this - # was merged into the Linux Kernel 2.6.22 - if kernel_is lt 2 6 22 ; then - acpi="$acpi --enable-acpi-ibm --enable-acpi-toshiba" - else - acpi="$acpi --disable-acpi-ibm --disable-acpi-toshiba" - fi - - acpi="$acpi --enable-acpi-proc --enable-acpi-acpid" - else - acpi="$acpi --disable-acpi-ibm --disable-acpi-toshiba" - acpi="$acpi --disable-acpi-proc --disable-acpi-acpid" - fi - - hardware="--with-cpufreq --with-usb-csr --with-keymaps" - use arm && hardware="$hardware --with-omap --enable-pmu" - use ppc && hardware="$hardware --enable-pmu" - - if use dell ; then - hardware="$hardware --with-dell-backlight" - else - hardware="$hardware --without-dell-backlight" - fi - - hardware="$hardware --enable-sonypic" - else - hardware="--without-cpufreq --without-usb-csr --without-keymaps" - hardware="$hardware --without-omap" - hardware="$hardware --without-dell-backlight" - hardware="$hardware --enable-acpi-ibm --enable-acpi-toshiba" - hardware="$hardware --disable-sonypic" - fi - -# ./autogen.sh --with-backend=${backend} \ -# --with-os-type=gentoo \ -# --with-pid-file=/var/run/hald.pid \ -# --with-hwdata=/usr/share/misc \ -# --with-socket-dir=/var/run/hald \ -# --enable-umount-helper \ -# $(use_enable apm) \ -# $(use_enable debug verbose-mode) \ -# $(use_enable disk-partition parted) \ -# $(use_enable doc docbook-docs) \ -# $(use_enable doc gtk-doc) \ -# --docdir=/usr/share/doc/${PF} \ -# --localstatedir=/var \ -# ${acpi} ${hardware} \ -# || die "configure failed" - econf --with-os-type=gentoo \ - --with-pid-file=/var/run/hald.pid \ - --with-socket-dir=/var/run/hald \ - $(use_enable apm) \ - $(use_enable debug verbose-mode) \ - $(use_enable disk-partition parted) \ - $(use_enable doc docbook-docs) \ - $(use_enable doc gtk-doc) \ - --disable-policy-kit \ - --docdir=/usr/share/doc/${PF} \ - --localstatedir=/var \ - ${acpi} ${hardware} \ - || die "configure failed" - - - - emake || die "make failed" -} - -src_install() { - emake DESTDIR="${D}" install || die - dodoc AUTHORS ChangeLog NEWS README - - # hal umount for unclean unmounts - exeinto /lib/udev/ - newexe "${FILESDIR}/hal-unmount.dev" hal_unmount - # initscript - newinitd "${FILESDIR}/0.5.10-hald.rc" hald - - # configuration - cp "${FILESDIR}/0.5.10-hald.conf" "${WORKDIR}/" - - if use debug; then - sed -e 's:HALD_VERBOSE="no":HALD_VERBOSE="yes":' \ - -i "${WORKDIR}/0.5.10-hald.conf" - fi - newconfd "${WORKDIR}/0.5.10-hald.conf" hald - - if use X ; then - # New Configuration Snippets - dodoc "${WORKDIR}/${PN}-config-examples"/*.fdi - dobin "${WORKDIR}/${PN}-config-examples"/migrate-xorg-to-fdi.py - - # Automagic conversion! - elog "Migrating xorg.conf Core Keyboard configuration to HAL FDI file" - "${WORKDIR}/${PN}-config-examples/migrate-xorg-to-fdi.py" 2> /dev/null \ - > "${D}/etc/hal/fdi/policy/10-x11-input.fdi" || \ - ewarn "Failed to migrate your keyboard configuration." - fi - - # We now create and keep /media here as both gnome-mount and pmount - # use these directories, to avoid collision. - keepdir /media - - # We also need to create and keep /etc/fdi/{information,policy,preprobe} - # or else hal bombs. - keepdir /etc/hal/fdi/{information,policy,preprobe} - - # HAL stores it's fdi cache in /var/lib/cache/hald - keepdir /var/lib/cache/hald - - # HAL keeps its unix socket here - keepdir /var/run/hald - keepdir /var/lib/hal -} - -pkg_postinst() { - # Despite what people keep changing this location. Either one works.. it doesn't matter - # http://dev.gentoo.org/~plasmaroo/devmanual/ebuild-writing/functions/ - - elog "The HAL daemon needs to be running for certain applications to" - elog "work. Suggested is to add the init script to your start-up" - elog "scripts, this should be done like this :" - elog "\`rc-update add hald default\`" - echo - elog "Looking for automounting support? Add yourself to the plugdev group" - echo - elog "IF you have additional applications which consume ACPI events, you" - elog "should consider installing acpid to allow applications to share ACPI" - elog "events." - if use X ; then - echo - elog "If you wish to use a non US layout, you may do so by executing:" - elog "setxkbmap <layout> or by utilizing your Desktop Environment's" - elog "Keyboard Layout Settings mechanism." - elog "Under GNOME, this is gnome-keyboard-properties, and under KDE" - elog "it is kxkb." - fi - echo - elog "In order have suspend/hibernate function with HAL or apps that use HAL" - elog "(such as gnome-power-manager), you should build HAL with the laptop" - elog "useflag which will install pm-utils." - if use X ; then - echo - elog "X Input Hotplugging (if you build xorg-server with the HAL useflag)" - elog "reads user specific configuration from /etc/hal/fdi/policy/." - if [[ $(cat "${ROOT}etc/hal/fdi/policy/10-x11-input.fdi" | wc -c) -gt 0 ]] - then - elog "We have converted your existing xorg.conf rules and the FDI is stored" - elog "at /etc/hal/fdi/policy/10-x11-input.fdi" - fi - elog "You should remove the Input sections from your xorg.conf once you have" - elog "migrated the rules to a HAL fdi file." - fi - - ebeep 5 - epause 5 -} diff --git a/sys-apps/util-linux/util-linux-9999.ebuild b/sys-apps/util-linux/util-linux-9999.ebuild deleted file mode 100644 index 06fd121..0000000 --- a/sys-apps/util-linux/util-linux-9999.ebuild +++ /dev/null @@ -1,70 +0,0 @@ -# Copyright 1999-2008 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-apps/util-linux/util-linux-9999.ebuild,v 1.7 2008/12/30 04:33:59 vapier Exp $ - -EGIT_REPO_URI="git://git.kernel.org/pub/scm/utils/util-linux-ng/util-linux-ng.git" -inherit eutils flag-o-matic autotools git - -MY_PV=${PV/_/-} -MY_P=${PN}-ng-${MY_PV} -S=${WORKDIR}/${MY_P} - -DESCRIPTION="Various useful Linux utilities" -HOMEPAGE="http://www.kernel.org/pub/linux/utils/util-linux-ng/" -SRC_URI="" - -LICENSE="GPL-2" -SLOT="" -KEYWORDS="" -IUSE="+enable-blkid crypt loop-aes nls old-linux selinux slang unicode" - -RDEPEND="!sys-process/schedutils - !sys-apps/setarch - >=sys-libs/ncurses-5.2-r2 - selinux? ( sys-libs/libselinux ) - slang? ( sys-libs/slang )" -DEPEND="${RDEPEND} - nls? ( sys-devel/gettext ) - virtual/os-headers" - -src_unpack() { - git_src_unpack - cd "${S}" - ./autogen.sh - elibtoolize -} -src_compile() { - econf \ - $(useq enable-blkid && echo --with-fsprobe=builtin) \ - $(use_enable nls) \ - --enable-agetty \ - --enable-cramfs \ - $(use_enable old-linux elvtune) \ - --disable-init \ - --disable-kill \ - --disable-last \ - --disable-mesg \ - --enable-partx \ - --enable-raw \ - --enable-rdev \ - --enable-rename \ - --disable-reset \ - --disable-login-utils \ - --enable-schedutils \ - --disable-wall \ - --enable-write \ - --without-pam \ - $(use unicode || echo --with-ncurses) \ - $(use_with selinux) \ - $(use_with slang) \ - || die "configure failed" - emake STRIP=/bin/true || die "emake failed" -} - -src_install() { - emake install DESTDIR="${D}" || die "install failed" -# dodir "${D}/$(get_libdir)" -# rsync -a --no-r -v "${D}/usr/$(get_libdir)/" "${D}/$(get_libdir)/" -# die - dodoc AUTHORS NEWS README* TODO docs/* -} |