8 files changed, 295 insertions, 0 deletions
diff --git a/app-misc/g15daemon/files/99-g15daemon.rules b/app-misc/g15daemon/files/99-g15daemon.rules
new file mode 100644
index 0000000..d491d68
--- /dev/null
+++ b/app-misc/g15daemon/files/99-g15daemon.rules
@@ -0,0 +1 @@
+SUBSYSTEM=="usb", ATTR{product}=="G15 Gaming Keyboard", RUN+="/usr/bin/g15daemon-hotplug"
diff --git a/app-misc/g15daemon/files/g15daemon-9999-forgotten-open-mode.patch b/app-misc/g15daemon/files/g15daemon-9999-forgotten-open-mode.patch
new file mode 100644
index 0000000..b475f1d
--- /dev/null
+++ b/app-misc/g15daemon/files/g15daemon-9999-forgotten-open-mode.patch
@@ -0,0 +1,11 @@
+--- ./g15daemon-1.9.5.3/g15daemon/utility_funcs.c	2008-01-26 06:02:07.000000000 +0100
++++ ./g15daemon-1.9.5.3/g15daemon/utility_funcs.c	2009-02-01 17:00:55.203009264 +0100
+@@ -356,7 +356,7 @@
+     config_items_t * item=NULL;
+     char line[1024];
+     
+-    config_fd = open(filename,O_CREAT|O_RDWR|O_TRUNC);
++    config_fd = open(filename,O_CREAT|O_RDWR|O_TRUNC,0664);
+     if(config_fd){
+     snprintf(line,1024,"# G15Daemon Configuration File\n# any items entered before a [section] header\n# will be in the Global config space\n# comments you wish to keep should start with a semicolon';'\n");
+     write(config_fd,line,strlen(line));
diff --git a/app-misc/g15daemon/files/g15daemon-hotplug b/app-misc/g15daemon/files/g15daemon-hotplug
new file mode 100644
index 0000000..1e20761
--- /dev/null
+++ b/app-misc/g15daemon/files/g15daemon-hotplug
@@ -0,0 +1,13 @@
+#!/bin/sh
+
+case "$ACTION" in
+    "add")
+        /etc/init.d/g15daemon restart
+        ;;
+    "remove")
+        /etc/init.d/g15daemon stop
+        ;;
+    *)
+        exit 0
+        ;;
+esac
diff --git a/app-misc/g15daemon/files/g15daemon.conf b/app-misc/g15daemon/files/g15daemon.conf
new file mode 100644
index 0000000..2d2bfc3
--- /dev/null
+++ b/app-misc/g15daemon/files/g15daemon.conf
@@ -0,0 +1,27 @@
+# G15Daemon Configuration File
+# any items entered before a [section] header
+# will be in the Global config space
+# comments you wish to keep should start with a semicolon';'
+
+[Global]
+Use MR as Cycle Key: Off
+
+[PLUGIN_LOAD_ORDER]
+0: g15plugin_uinput.so
+1: g15plugin_clock.so
+2: g15plugin_tcpserver.so
+TotalPlugins: 3
+
+[PLUGINS]
+Linux UINPUT Keyboard Output: Load
+Clock: Load
+LCDServer: Load
+
+[Keyboard OS Mapping (uinput)]
+device: /dev/input/uinput
+Lkeys.mapped: 0
+
+[Clock]
+24hrFormat: On
+ShowDate: Off
+Digital: On
diff --git a/app-misc/g15daemon/files/g15daemon.confd b/app-misc/g15daemon/files/g15daemon.confd
new file mode 100644
index 0000000..08ea97f
--- /dev/null
+++ b/app-misc/g15daemon/files/g15daemon.confd
@@ -0,0 +1,9 @@
+# /etc/conf.d/g15daemon: Configuration for the g15daemon
+
+# Key to switch the client-screens. Default is the MR key,
+# Set to "yes" to use L1 key instead (black round key below the LCD, above the multimedia keys).
+CLIENT_SWITCH_L1="no"
+
+# Set to "yes" to switch off the lcd backlight when stopping g15daemon.
+BACKLIGHT_OFF="no"
+
diff --git a/app-misc/g15daemon/files/g15daemon.initd b/app-misc/g15daemon/files/g15daemon.initd
new file mode 100644
index 0000000..b8e8cd6
--- /dev/null
+++ b/app-misc/g15daemon/files/g15daemon.initd
@@ -0,0 +1,41 @@
+#!/sbin/runscript
+# Copyright 1999-2007 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/app-misc/g15daemon/files/g15daemon-1.2.7-r2.initd,v 1.1 2007/12/19 17:38:30 chainsaw Exp $
+
+# Init script for g15daemon
+
+depend() {
+	after hotplug
+	after usb
+	after modules
+}
+
+start() {
+	ebegin "Starting g15daemon"
+
+	# Does the input device already exist?
+	if [ -e /proc/modules -a ! -e /dev/input/uinput ]; then
+		# We can load modules, but uinput device does not exist
+		einfo "Loading uinput module"
+		/sbin/modprobe uinput > /dev/null 2> /dev/null
+	fi
+
+	local SWITCHKEY=""
+	[ "${CLIENT_SWITCH_L1}" = "yes" ] && SWITCHKEY="--switch"
+	start-stop-daemon --start --background --pidfile /var/run/g15daemon.pid \
+		--exec /usr/sbin/g15daemon -- ${SWITCHKEY}
+	eend $? "Failed to start g15daemon."
+}
+
+stop() {
+	ebegin "Stopping g15daemon"
+	local KILLOPT="-k"
+	if [ $BACKLIGHT_OFF = "yes" ]; then
+		KILLOPT="-K"
+	fi
+	/usr/sbin/g15daemon ${KILLOPT} &>/dev/null
+	sleep 1
+	start-stop-daemon -R 5 --stop --quiet --pidfile /var/run/g15daemon.pid
+	eend $?
+}
diff --git a/app-misc/g15daemon/g15daemon-9999.ebuild b/app-misc/g15daemon/g15daemon-9999.ebuild
new file mode 100644
index 0000000..4b585c1
--- /dev/null
+++ b/app-misc/g15daemon/g15daemon-9999.ebuild
@@ -0,0 +1,158 @@
+# Copyright 1999-2010 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/app-misc/g15daemon/g15daemon-1.9.5.3-r3.ebuild,v 1.6 2010/05/29 21:11:59 arfrever Exp $
+
+EAPI=2
+
+inherit eutils linux-info perl-module python multilib base subversion autotools
+
+DESCRIPTION="G15daemon takes control of the G15 keyboard, through the linux kernel uinput device driver"
+HOMEPAGE="http://g15daemon.sourceforge.net/"
+ESVN_REPO_URI="https://g15daemon.svn.sourceforge.net/svnroot/g15daemon/trunk/g15daemon-wip"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="amd64 ppc ppc64 x86"
+IUSE="perl python"
+
+DEPEND="=virtual/libusb-0*
+	>=dev-libs/libg15-1.2.4
+	>=dev-libs/libg15render-1.2
+	perl? ( >=dev-perl/Inline-0.4 )
+	python? ( dev-lang/python )"
+
+RDEPEND="${DEPEND}
+	perl? ( dev-perl/GDGraph )"
+
+uinput_check() {
+	ebegin "Checking for uinput support"
+	local rc=1
+	linux_config_exists && linux_chkconfig_present INPUT_UINPUT
+	rc=$?
+
+	if [[ $rc -ne 0 ]] ; then
+		eerror "To use g15daemon, you need to compile your kernel with uinput support."
+		eerror "Please enable uinput support in your kernel config, found at:"
+		eerror
+		eerror "Device Drivers -> Input Device ... -> Miscellaneous devices -> User level driver support."
+		eerror
+		eerror "Once enabled, you should have the /dev/input/uinput device."
+		eerror "g15daemon will not work without the uinput device."
+	fi
+}
+
+pkg_setup() {
+	linux-info_pkg_setup
+	uinput_check
+}
+
+src_unpack() {
+	subversion_src_unpack
+	if use perl; then
+		unpack "./lang-bindings/perl-G15Daemon-0.2.tar.gz"
+	fi
+	if use python; then
+		unpack "./lang-bindings/pyg15daemon-0.0.tar.bz2"
+	fi
+}
+
+src_prepare() {
+	if use perl; then
+		perl-module_src_prepare
+		sed -i \
+			-e '1i#!/usr/bin/perl' \
+			"${S}"/contrib/testbindings.pl
+	else
+		# perl-module_src_prepare always calls base_src_prepare
+		base_src_prepare
+	fi
+}
+
+src_configure() {
+	eautoreconf
+	econf
+	emake || die "make failed"
+	
+	if use perl; then
+		cd "${WORKDIR}/g15daemon-9999/G15Daemon-0.2"
+		perl-module_src_configure
+	fi
+}
+
+src_compile() {
+	base_src_compile
+
+	if use perl; then
+		cd "${WORKDIR}/G15Daemon-0.2"
+		perl-module_src_compile
+	fi
+}
+
+src_install() {
+	emake DESTDIR="${D}" \
+		docdir=/usr/share/doc/${PF} install || die "make install failed"
+
+	# remove odd docs installed my make
+	rm "${D}/usr/share/doc/${PF}/"{LICENSE,README.usage}
+
+	insinto /usr/share/${PN}/contrib
+	doins contrib/xmodmaprc
+	doins contrib/xmodmap.sh
+	if use perl; then
+		doins contrib/testbindings.pl
+	fi
+
+	newconfd "${FILESDIR}/${PN}.confd" ${PN}
+	newinitd "${FILESDIR}/${PN}.initd" ${PN}
+	dobin "${FILESDIR}/g15daemon-hotplug"
+	insinto /etc/udev/rules.d
+	doins "${FILESDIR}/99-g15daemon.rules"
+
+	insinto /etc
+	doins "${FILESDIR}"/g15daemon.conf
+
+	if use perl; then
+		ebegin "Installing Perl Bindings (G15Daemon.pm)"
+		cd "${WORKDIR}/g15daemon-9999/G15Daemon-0.2"
+		docinto perl
+		perl-module_src_install
+	fi
+
+	if use python; then
+		ebegin "Installing Python Bindings (g15daemon.py)"
+		cd "${WORKDIR}/g15daemon-9999/pyg15daemon"
+
+		insinto $(python_get_sitedir)/g15daemon
+		doins g15daemon.py
+
+		docinto python
+		dodoc AUTHORS
+	fi
+}
+
+pkg_postinst() {
+	if use python; then
+		python_mod_optimize $(python_get_sitedir)/g15daemon
+		echo ""
+	fi
+
+	elog "To use g15daemon, you need to add g15daemon to the default runlevel."
+	elog "This can be done with:"
+	elog "# /sbin/rc-update add g15daemon default"
+	elog "You can edit some g15daemon options at /etc/conf.d/g15daemon"
+	elog ""
+	elog "To have all new keys working in X11, you'll need create a "
+	elog "specific xmodmap in your home directory or edit the existent one."
+	elog ""
+	elog "Create the xmodmap:"
+	elog "cp /usr/share/g15daemon/contrib/xmodmaprc ~/.Xmodmap"
+	elog ""
+	elog "Adding keycodes to an existing xmodmap:"
+	elog "cat /usr/share/g15daemon/contrib/xmodmaprc >> ~/.Xmodmap"
+}
+
+pkg_postrm() {
+	if use python; then
+		python_mod_cleanup $(python_get_sitedir)/g15daemon
+	fi
+}
diff --git a/app-misc/g15macro/g15macro-9999.ebuild b/app-misc/g15macro/g15macro-9999.ebuild
new file mode 100644
index 0000000..294c9d6
--- /dev/null
+++ b/app-misc/g15macro/g15macro-9999.ebuild
@@ -0,0 +1,35 @@
+# Copyright 1999-2008 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/app-misc/g15macro/g15macro-1.0.3.ebuild,v 1.1 2008/09/13 22:35:35 robbat2 Exp $
+
+inherit subversion autotools
+
+DESCRIPTION="Macro recording plugin to G15daemon"
+HOMEPAGE="http://g15daemon.sourceforge.net/"
+
+ESVN_REPO_URI="https://g15daemon.svn.sourceforge.net/svnroot/g15daemon/trunk/g15daemon-clients/g15macro/"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~ppc ~ppc64 ~x86"
+IUSE=""
+
+DEPEND=">=app-misc/g15daemon-1.9.0
+	dev-libs/libg15
+	dev-libs/libg15render
+	x11-libs/libX11
+	x11-proto/xextproto
+	x11-proto/xproto
+	x11-libs/libXtst"
+
+RDEPEND="${DEPEND}
+	sys-libs/zlib"
+
+src_install() {
+	eautoreconf
+	econf
+	emake DESTDIR="${D}" install || die "make install failed"
+	rm "${D}"/usr/share/doc/${P}/{COPYING,NEWS}
+
+	prepalldocs
+}